标准号 |
中文名称 |
英文名称 |
DIN EN ISO 4518-1995 |
金属镀层.镀层厚度的测量.表面光法度轮廓仪法 |
Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:1980); German version EN ISO 4518:1995 |
DIN EN ISO 4524-3-1995 |
金属镀层.金及金合金电镀层的试验方法.第3部分:孔隙率的阳极电解试验 |
Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 3: Electrographic tests for porosity (ISO 4524-3:1985); German version EN ISO 4524-3:1995 |
DIN EN ISO 4524-6-1995 |
金属镀层.电镀金和金合金镀层的测试方法.第6部分:残留盐类的测定 |
Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 6: Determination of the presence of residual salts (ISO 4524-6:1988); German version EN ISO 4524-6:1994 |
DIN EN ISO 4526-2004 |
金属涂层.工程用镍电镀层 |
|
DIN EN ISO 4535-1999 |
釉瓷和搪瓷.抗洗涤纺织品用热洗涤剂溶液性能测定用仪器 |
Vitreous and porcelain enamels - Apparatus for determination of resistance to hot detergent solutions used for washing textiles (ISO 4535:1983); German version EN ISO 4535:1998 |
DIN EN ISO 4536-1995 |
金属基质上的金属和无机物涂层.盐液滴腐蚀试验(SD试验) |
Metallic and non-organic coatings on metallic substrates - Saline droplets corrosion test (SD test) (ISO 4536:1985); German version EN ISO 4536:1995 |
DIN EN ISO 4538-1995 |
金属镀层.硫代乙酰胺腐蚀试验(TAA试验) |
Metallic coatings - Thioacetamide corrosion test (TAA test) (ISO 4538:1978); German version EN ISO 4538:1995 |
DIN EN ISO 4541-1995 |
金属和其它无机物涂层.涂膏密室耐腐蚀试验(CORR试验) |
Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test) (ISO 4541:1978); German version EN ISO 4541:1994 |
DIN EN ISO 4543-1995 |
金属镀层和其它无机物涂层.适用于储存情况的腐蚀试验一般规则 |
Metallic and other non-organic coatings - General rules for storage conditions (ISO 4543:1981); German version EN ISO 4543:1994 |
DIN EN ISO 4566-1995 |
舱内安装发动机的小型船舶.锥度为1:10螺旋浆轴端和尾轴毂 |
Small craft with inboard engine - Propeller shaft ends and bosses with 1:10 taper (ISO 4566:1992); German version EN ISO 4566:1995 |
DIN EN ISO 4577-1999 |
塑料.聚丙烯和丙烯共聚物.空气中氧化热稳定性的测定.烘箱法 |
Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air, oven method (ISO 4577:1983); German version EN ISO 4577:1999 |
DIN EN ISO 4583-1998 |
塑料.环氧树脂和有关材料.易皂化氯的测定 |
Plastics - Epoxy resins and related materials - Determination of easily saponifiable chlorine (ISO 4583:1998); German version EN ISO 4583:1998 |
DIN EN ISO 4589-1-1999 |
塑料.通过氧指数测定其燃烧性.第1部分:导论 |
Plastics - Determination of burning behaviour by oxygen index - Part 1: Guidance (ISO 4589-1:1996); German version EN ISO 4589-1:1999 |
DIN EN ISO 4589-2-1999 |
塑料.通过氧指数测定其燃烧性.第2部分:环境温度试验 |
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:1996); German version EN ISO 4589-2:1999 |
DIN EN ISO 4590-2003 |
硬质泡沫塑料.开孔和闭孔容积百分数测定 |
(Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2002); German version EN ISO 4590:2003) |
DIN EN ISO 4597-1-1998 |
塑料.环氧树脂的硬化剂和促进剂.第1部分:名称与牌号 |
Plastics - Hardeners and accelerators for epoxide resins - Part 1: Designation (ISO 4597-1:1983); German version EN ISO 4597-1:1997 |
DIN EN ISO 4599-1997 |
塑料.耐环境应力龟裂的测定.弯形条块法 |
Plastics - Determination of resistance to environmental stress cracking (ESC) - Bent strip method (ISO 4599:1986); German version EN ISO 4599:1996 |
DIN EN ISO 4608-1998 |
塑料.一般用途的氯乙烯均聚物和共聚物树脂.室温下增塑剂吸收的测定 |
Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature (ISO 4608:1998); German version EN ISO 4608:1998 |
DIN EN ISO 4610-2002 |
塑料.氯乙烯均聚物和共聚物树脂.使用气喷式筛滤器械的筛析 |
Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus (ISO 4610:2001); German version EN ISO 4610:2001 |
DIN EN ISO 4611-2000 |
塑料.湿热,水溅和盐雾效果的测定 |
Plastics - Determination of effects of exposure to damp heat, water spray and salt mist (ISO 4611:1987); German version EN ISO 4611:1999 |
DIN EN ISO 4612-1999 |
塑料.测试用途的聚氯乙烯(PVC)膏料制备.行星式混合器方法 |
Plastics - Preparation of PVC pastes for testing purposes - Planetary-mixer method (ISO 4612:1999); German version EN ISO 4612:1999 |
DIN EN ISO 4613-1-1999 |
塑料.醋酸乙烯/乙烯酯(E/VAC)模塑材料.第1部分:名称与符号及规范. |
Plastics - Ethylen/vinyl acetate (E/VAC) moulding and extrusion materials - Part 1: Designation and specification (ISO 4613-1:1993); German version EN ISO 4613-1:1999 |
DIN EN ISO 4613-2-1995 |
塑料.醋酸乙烯/乙烯酯(E/VAC)模塑材料.第2部分:试样制造和性能测定 |
Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4613-2:1995); German version EN ISO 4613-2:1995 |
DIN EN ISO 4613-2-2004 |
塑料.乙酸乙烯/乙烯酯(E/VAC)模塑和挤塑材料.第2部分:试验样品的制备和性能测定 |
|
DIN EN ISO 4614-2000 |
塑料.三聚氰胺--甲醛压模.可萃取的甲醛的测定 |
Plastics - Melamine-formaldehyde mouldings - Determination of extractable formaldehyde (ISO 4614:1977); German version EN ISO 4614:1999 |
DIN EN ISO 4615-2000 |
塑料.未饱和的聚酯和环氧树脂.氯的总含量的测定 |
Plastics - Unsaturated polyesters and epoxide resins - Determination of total chlorine content (ISO 4615:1979); German version EN ISO 4615:1999 |
DIN EN ISO 4617-2000 |
色漆和清漆.等义术语表 |
Paints and varnishes - List of equivalent terms (ISO 4617:2000); German version EN ISO 4617:2000 |
DIN EN ISO 4618-2-1999 |
漆和涂料.涂层材料的术语和定义.第2部分:漆的特征和性能的专门术语 |
Paints and varnishes - Terms and definitions for coating materials - Part 2: Special terms relating to paint characteristics and properties (ISO 4618-2:1999); Trilingual version EN ISO 4618-2:1999 |
DIN EN ISO 4618-3-1999 |
漆和涂料.涂层材料的术语和定义.第3部分:表面准备和涂层方法 |
Paints and varnishes - Terms and definitions for coating materials - Part 3: Surface preparation and methods of application (ISO 4618-3:1999); Trilingual version EN ISO 4618-3:1999 |
DIN EN ISO 4622-1994 |
色漆和清漆.堆积压力试验 |
Paints and varnishes - Pressure test for stackability (ISO 4622:1992); German version EN ISO 4622:1994 |
DIN EN ISO 4623-1-2002 |
涂料和清漆.耐丝状腐蚀性的测定 |
Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrate (ISO 4623-1:2000); German version EN ISO 4623-1:2002 |
DIN EN ISO 4623-2-2004 |
涂料和清漆.耐丝状腐蚀性的测定.第2部分:铝衬底 |
|
DIN EN ISO 4624-2003 |
色漆和清漆.粘附力拉脱试验 |
(Paints and varnishes - Pull-off test for adhesion (ISO 4624:2002); German version EN ISO 4624:2003) |
DIN EN ISO 4628-1-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第1部分:一般说明和名称与符号系统 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2003); German version EN ISO) |
DIN EN ISO 4628-1-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第1部分:一般说明和名称与符号系统 |
|
DIN EN ISO 4628-10-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第10部分:丝状腐蚀等级评定 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2003); German version EN ISO) |
DIN EN ISO 4628-10-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第10部分:丝状腐蚀等级评定 |
|
DIN EN ISO 4628-2-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第2部分:起泡等级的评定 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2003); German version EN ISO 4628-2:200 |
DIN EN ISO 4628-2-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第2部分:起泡等级的评定 |
|
DIN EN ISO 4628-3-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第3部分:生锈等级的评定 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2003); German version EN ISO 4628-3:2003) |
DIN EN ISO 4628-3-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第3部分:生锈等级的评定 |
|
DIN EN ISO 4628-4-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第4部分:裂纹等级的评定 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2003); German version EN ISO 4628-4:2003) |
DIN EN ISO 4628-4-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第4部分:裂纹等级的评定 |
|
DIN EN ISO 4628-5-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第5部分:剥落等级的评定 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2003); German version EN ISO 4628-5:2003) |
DIN EN ISO 4628-5-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第5部分:剥落等级的评定 |
|
DIN EN ISO 4628-6-2002 |
涂料和清漆.涂料覆层降解的评定.一般缺陷的程度、数量和大小的规定.第6部分:起霜程度的粘胶带评定方法 |
Paints and varnishes - Evaluation of degradation of paint coatings; Designation of intensity, quantity and size of common types of defect - Part 6: Rating of degree of chalking by tape method (ISO 4628-6:1990); German version EN ISO 4628-6:2001 |
DIN EN ISO 4628-7-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第7部分:粉化等级评定用丝绒方法 |
(Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2003); German version E) |
DIN EN ISO 4628-7-2004 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第7部分:粉化等级评定用丝绒方法 |
|
DIN EN ISO 4628-8-2005 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第8部分:划痕周围脱层和腐蚀度的评定 |
|
DIN EN ISO 4628-8-2005 |
色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第8部分:划痕周围脱层和腐蚀度的评定 |
|
DIN EN ISO 4629-1998 |
色漆介质.羟值的测定.滴定法 |
Binders for paints and varnishes - Determination of hydroxyl value - Titrimetric method (ISO 4629:1996); German version EN ISO 4629:1998 |
DIN EN ISO 4651-1995 |
泡沫橡胶和塑料.动态弹性的测定 |
Cellular rubbers and plastics - Determination of dynamic cushioning performance (ISO 4651:1988); German version EN ISO 4651:1995 |
DIN EN ISO 4671-2000 |
橡胶和塑料软管及软管组件.尺寸测量方法 |
Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions (ISO 4671:1999); German version EN ISO 4671:2000 |
DIN EN ISO 4672-1999 |
橡胶和塑料软管低于室温的柔性试验 |
Rubber and plastics hoses - Sub-ambient temperature flexibility tests (ISO 4672:1997); German version EN ISO 4672:1999 |
DIN EN ISO 4674-2-1998 |
橡胶或塑料涂层的织物.抗撕裂强度的测定.第2部分:冲击摆法 |
Rubber or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method (ISO 4674-2:1998); German version EN ISO 4674-2:1998 |
DIN EN ISO 472-2002 |
塑料.词汇 |
Plastics - Vocabulary (ISO 472:1999); German version EN ISO 472:2001 |
DIN EN ISO 4753-2000 |
紧固件.米制ISO外螺纹零件尾端 |
Fasteners - Ends of parts with external metric ISO thread (ISO 4753:1999); German version EN ISO 4753:1999 |
DIN EN ISO 4757-1994 |
螺钉的十字槽 |
Cross recesses for screws (ISO 4757:1983); German version EN ISO 4757:1994 |
DIN EN ISO 4759-1-2001 |
紧固件公差.第1部分:螺栓、螺钉和垫圈和螺母.产品等级A和C |
Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000 |
DIN EN ISO 4759-3-2000 |
紧固件公差.第3部分:螺栓、螺钉和螺母用平垫圈.产品等级A和C |
Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts; product grades A and C (ISO 4759-3:2000); German version EN ISO 4759-3:2000 |
DIN EN ISO 4762-1998 |
内六角螺钉 |
Hexagon socket head cap screws (ISO 4762:1997); German version EN ISO 4762:1997 |
DIN EN ISO 4762-2004 |
内六角圆柱头螺钉 |
|
DIN EN ISO 4796-1-2001 |
实验室玻璃器皿.瓶.第1部分:螺纹颈口瓶 |
Laboratory glassware - Bottles - Part 1: Screw neck bottles (ISO 4796-1:2000); German version EN ISO 4796-1:2000 |
DIN EN ISO 4796-2-2001 |
实验室玻璃器皿.瓶.第2部分:锥形颈瓶 |
Laboratory glassware - Bottles - Part 2: Conical neck bottles (ISO 4796-2:2000); German version EN ISO 4796-2:2000 |
DIN EN ISO 4796-3-2001 |
实验室玻璃器皿.瓶.第3部分:吸气瓶 |
Laboratory glassware - Bottles - Part 3: Aspirator bottles (ISO 4796-3:2000); German version EN ISO 4796-3:2000 |
DIN EN ISO 4823-2001 |
牙科学.弹性印模材料 |
Dentistry - Elastomeric impression materials (ISO 4823:2000); German version EN ISO 4823:2000 |
DIN EN ISO 4824-2000 |
牙科学.陶瓷托牙牙齿 |
Dentistry - Ceramic denture teeth (ISO 4824:1993 + AMD 1-1997); including Amendment A1:2000; German version EN ISO 4824:1996 + A1:2000 |
DIN EN ISO 483-1999 |
塑料.恒定值下为保持相对湿度使用水溶液作调节和试验用的小型外壳 |
Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain relative humidity at constant value (ISO 483:1988); German version EN ISO 483:1999 |
DIN EN ISO 4833-2003 |
食品和动物饲料的微生物学.微生物计数的水平法.30℃时的菌落计数技术 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of microorganisms - Colony-count technique at 30 鳦 (ISO 4833:2003); German version EN ISO 4833:2003) |
DIN EN ISO 4869-2-1995 |
声学.听力保护器.第2部分:当听力保护器磨损时影响性的A-重声压级的评定 |
Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO 4869-2:1994); German version EN ISO 4869-2:1995 |
DIN EN ISO 4869-4-2000 |
声学.听力保护器.第4部分:依据压力回声的耳罩的有效声音压力级别的测量 |
Acoustics - Hearing protectors - Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs (ISO/TR 4869-4:1998); German version EN ISO 4869-4:2000 |
DIN EN ISO 4871-1997 |
声学.机器和设备释放燥音值的公告和验证 |
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996); German version EN ISO 4871:1996 |
DIN EN ISO 489-1999 |
塑料.折射指数的测定 |
Plastics - Determination of the refractive index (ISO 489:1999); German version EN ISO 489:1999 |
DIN EN ISO 4892-1-2001 |
塑料.暴露于实验室光源的方法.第1部分:通用指南 |
Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:1999); German version EN ISO 4892-1:2000 |
DIN EN ISO 4892-2-2000 |
塑料.暴露于实验室光源的方法.第2部分:氙弧灯光源 |
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources (ISO 4892-2:1994); German version EN ISO 4892-2:1999 |
DIN EN ISO 4892-3-2000 |
塑料.暴露于实验室光源的方法.第3部分:UV荧光灯 |
Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:1994); German version EN ISO 4892-3:1999 |
DIN EN ISO 4894-1-1999 |
塑料.苯乙烯/丙烯腈(SAN)共聚物的模塑和挤塑材料.第1部分:名称与符号系统和基本规范 |
Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 4894-1:1997); German version EN ISO 4894-1:1999 |
DIN EN ISO 4894-2-1999 |
塑料.苯乙烯/丙烯腈(SAN)共聚物的模塑和挤塑材料.第2部分:性能的测定 |
Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4894-2:1995); German version EN ISO 4894-2:1999 |
DIN EN ISO 4895-1999 |
塑料.液态环氧树脂.结晶可能性的测定 |
Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:1997); German version EN ISO 4895:1999 |
DIN EN ISO 4921-2002 |
针织.基本概念.词汇 |
Knitting - Basic concepts - Vocabulary (ISO 4921:2000); German version EN ISO 4921:2001 |
DIN EN ISO 4934-2004 |
钢和铁.硫含量的测定.重力法 |
|
DIN EN ISO 4957-2001 |
工具钢 |
Tool steels (ISO 4957:1999); German version EN ISO 4957:1999 |
DIN EN ISO 505-2000 |
输送带.弹性输送带抗撕裂扩展性的测定方法 |
Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts (ISO 505:1999); German version EN ISO 505:1999 |
DIN EN ISO 5079-1996 |
纺织品.纤维.纺织纤维最大拉伸强力和最大拉伸强力延伸的测定 |
Textiles - Fibres - Determination of breaking force and elongation at break of individual fibres (ISO 5079:1979); German version EN ISO 5079:1995 |
DIN EN ISO 5080-1999 |
波罗麻农用细绳 |
Sisal agricultural twines (ISO 5080:1994); German version EN ISO 5080:1999 |
DIN EN ISO 5084-1996 |
纺织品.纺织品厚度的测定 |
Textiles - Determination of thickness of textiles and textile products (ISO 5084:1996); German version EN ISO 5084:1996 |
DIN EN ISO 5135-1999 |
声学.通过混响室测量确定空气流量,容积流量调节器,节流调节件和闭锁调节件的噪音的声功率级 |
Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997); German version EN ISO 5135:1998 |
DIN EN ISO 5155-1996 |
家用冷却器.冷冻器和冰冻器.性能和检验方法 |
Household refrigerating appliances - Frozen food storage cabinets and food freezers - Characteristics and test methods (ISO 5155:1995); German version EN ISO 5155:1995 |
DIN EN ISO 5165-1999 |
石油产品.柴油燃料点火质量的测定.十六烷发动机法 |
Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:1998); German version EN ISO 5165:1998 |
DIN EN ISO 5167-1-1995 |
用压差装置测量流体流量.第1部分:圆截面管道中插入的节流孔板,喷嘴和文杜利管 |
Measurement of fluid flow by means of pressure differential devices - Part 1: Orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full (ISO 5167-1:1991); German version EN ISO 5167-1:1995 |
DIN EN ISO 5167-1-2004 |
用园截面管道中插入的压差装置测量流体流量.第1部分:总体规则和要求 |
(Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003); German version EN ISO 5167-1:2003) |
DIN EN ISO 5167-1-2004 |
用园截面管道中插入的压差装置测量流体流量.第1部分:总体规则和要求 |
|
DIN EN ISO 5167-1/A1-1998 |
用压差装置测量流体流量.第1部分:圆截面管道中插入的节流孔板,喷嘴和文杜利管.修正A1 |
Measurement of fluid flow by means of pressure differential devices - Part 1: Orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full; Amendment A1 (ISO 5167-1-1991/AMD 1:1998); German version EN ISO 5167-1:1995/ |
DIN EN ISO 5167-2-2004 |
用插入圆截面管道中的压差装置测量流体流量.第2部分:节流孔板 |
(Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates (ISO 5167-2:2003); German version EN ISO 5167-2:2003) |
DIN EN ISO 5167-2-2004 |
用插入圆截面管道中的压差装置测量流体流量.第2部分:节流孔板 |
|
DIN EN ISO 5167-3-2004 |
用插入圆截面管道中的压差装置测量流体流量.第3部分:喷嘴和文杜利喷嘴 |
(Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003); German version EN ISO 5167-3:2003) |
DIN EN ISO 5167-3-2004 |
用插入圆截面管道中的压差装置测量流体流量.第3部分:喷嘴和文杜利喷嘴 |
|
DIN EN ISO 5167-4-2004 |
用插入圆截面管道中的压差装置测量流体流量.第4部分:文杜利管 |
(Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes (ISO 5167-4:2003); German versions EN ISO 5167-4:2003) |
DIN EN ISO 5167-4-2004 |
用插入圆截面管道中的压差装置测量流体流量.第4部分:文杜利管 |
|
DIN EN ISO 5172-1997 |
焊接,切割和加热用手工焊枪.规范和试验 |
Manual blowpipes for welding, cutting and heating - Specifications and tests (ISO 5172:1995, including Amendment 1:1995); German version EN ISO 5172:1996 |
DIN EN ISO 5183-1-2000 |
电阻焊接设备.外锥度1:10电极接头.第1部分:圆锥形接头,锥度1:10 |
Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10 (ISO 5183-1:1998); German version EN ISO 5183-1:2000 |
DIN EN ISO 5183-2-2002 |
电阻点焊.外锥度1:10电极接头.第2部分:端推力电极用平衡柄接头(ISO 5183-2:2000) |
Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes (ISO 5183-2:2000); German version EN ISO 5183-2:2002 |
DIN EN ISO 5198-1999 |
离心式混合轴流泵.液压性能试验规程.精密级 |
Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class (ISO 5198:1987); German version EN ISO 5198:1998 |
DIN EN ISO 5210-1996 |
工业阀门.多圈旋转阀门驱动器附件 |
Industrial valves - Multi-turn valve actuator attachments (ISO 5210:1991); German version EN ISO 5210:1996 |
DIN EN ISO 5211-2001 |
工业阀门.单圈旋转型阀门驱动器附件 |
Industrial valves - Part-turn actuator attachments (ISO 5211:2001); German version EN ISO 5211:2001 |
DIN EN ISO 5263-1-2004 |
纸浆.实验室湿法分解.第1部分:化学纸浆的分解 |
|
DIN EN ISO 5263-1997 |
纸浆.实验室湿法分解 |
Pulps - Laboratory wet disintegration (ISO 5263:1995); German version EN ISO 5263:1997 |
DIN EN ISO 5263-2-2004 |
纸浆.实验室湿法分解.第2部分:20 鳦时机械纸浆的分解 |
|
DIN EN ISO 5263-3-2004 |
纸浆.实验室湿法分解.第3部分:85 鳦时机械纸浆的分解 |
|
DIN EN ISO 5264-2-2003 |
纸浆.实验室打浆.第2部分:PFI碾磨法 |
(Pulps - Laboratory beating - Part 2: PFI mill method (ISO 5264-2:2002); German version EN ISO 5264-2:2002) |
DIN EN ISO 5267-1-2000 |
纸浆.排水能力的测定.第1部分:朔 -里格勒法(SCHO-PPER-RIEGLER) |
Pulps - Determination of drainability - Part 1: Schopper-Riegler method (ISO 5267-1:1999); German version EN ISO 5267-1:2000 |
DIN EN ISO 5269-1-2000 |
纸浆.实验室物理试验用纸板制备.第1部分:常规纸制造法 |
Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method (ISO 5269-1:1998); German version EN ISO 5269-1:2000 |
DIN EN ISO 5269-1-2005 |
纸浆.物理试验用实验室纸张的制备.第1部分:常规纸页成型法 |
|
DIN EN ISO 5269-2-2000 |
纸浆.实验室物理试验用纸板制备.第2部分:快速KOTHEN方法 |
Pulps - Preparation of laboratory sheets for physical testing - Part 2: Rapid-K攖hen method (ISO 5269-2:1998); German version EN ISO 5269-2:2000 |
DIN EN ISO 527-1-1996 |
塑料.拉伸性能测定.第1部分:总则 |
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:1993 including Corr 1:1994); German version EN ISO 527-1:1996 |
DIN EN ISO 527-2-1996 |
塑料.拉伸性能测定.第2部分:模压和挤压塑料试验条件 |
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:1993, including Corr. 1:1994); German version EN ISO 527-2:1996 |
DIN EN ISO 527-3 Berichtigung 1-1998 |
对DIN EN ISO 527-3:1995-10的校正 |
Corrigenda to DIN EN ISO 527-3:1995-10 (EN ISO 527-3:1995/AC:1998) |
DIN EN ISO 527-3-1995 |
塑料.拉伸性能测定.第3部分:薄膜和板的试验条件 |
Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995); German version EN ISO 527-3:1995 |
DIN EN ISO 527-3-2003 |
塑料.抗拉性能的测定.第3部分:薄膜和薄板材的试验条件 |
(Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995 + Corr 1:1998 + Corr 2:2001) (includes Corrigendum AC:1998 + AC:2002); German version EN ISO 527-3:1995 + AC:1998 + AC:2002) |
DIN EN ISO 527-4-1997 |
塑料.拉伸性能测定.第4部分:均质和非均质增强纤维塑料复合材料的检验条件 |
Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and anisotropic fibre-reinforced plastic composites (ISO 527-4:1997); German version EN ISO 527-4:1997 |