标准号 |
中文名称 |
英文名称 |
DD ISO/TS 16668-2001 |
基本语义学索引 |
(Basic semantics register (BSR)) |
DIN EN ISO 1 Bb.1-2004 |
产品几何量技术规范.产品几何量技术规范和验证用标准温度.由于热影响造成的系统错误和长度测量不确定度的分 |
(Geometrical product specifications (GPS) - Standard reference temperature for geometrical product specification and verification - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences (ISO/TR 160) |
DIN EN ISO 1 Bb.1-2004 |
产品几何量技术规范.产品几何量技术规范和验证用标准温度.由于热影响造成的系统错误和长度测量不确定度的分布 |
|
DIN EN ISO 1-2002 |
产品几何量技术规范(GPS).产品几何量技术规范和鉴定用的标准参考温度 |
(Geometrical product specifications (GPS) - Standard reference temperature for geometrical product specifications and verification (ISO 1:2002); German version EN ISO 1:2002) |
DIN EN ISO 10007-1996 |
质量管理.配置管理指南 |
(Quality management - Guidelines for configuration management (ISO 10007:1995); Trilingual version EN ISO 10007:1996) |
DIN EN ISO 10012-2004 |
测量管理系统.测量过程和测量设备的要求 |
|
DIN EN ISO 10058-1996 |
菱美矿和白云石.化学分析 |
(Magnesites and dolomites - Chemical analysis (ISO 10058:1992); German version EN ISO 10058:1995) |
DIN EN ISO 10062-1995 |
在人工环境中,极低浓度污染气候(对物质)腐蚀程度的试验 |
(Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:1991); German version EN ISO 10062:1995) |
DIN EN ISO 10066-1998 |
软质泡沫聚合材料.压缩蠕变测定 |
(Flexible cellular polymeric materials - Determination of creep in compression (ISO 10066:1991); German version EN ISO 10066:1997) |
DIN EN ISO 10075-1-2000 |
有关工作所致精神负担的人类工效学原理.第1部分:一般术语和定义 |
(Ergonomic principles related to mental work-load - Part 1: General terms and definitions (ISO 10075:1991); German version EN ISO 10075-1:2000) |
DIN EN ISO 10075-2-2000 |
与精神工作荷载有关的人类工效学原理.第2部分:设计原理 |
(Ergonomic principles related to mental workload - Part 2: Design principles (ISO 10075-2:1996); German version EN ISO 10075-2:2000) |
DIN EN ISO 10075-3-2004 |
与心理负荷有关的人类工效学原则.第3部分:心理负荷测量和评估方法的准则和要求 |
|
DIN EN ISO 10077-1-2000 |
门窗和遮板的热性能.热传递系数的计算.第1部分:简化法 |
(Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: Simplified method (ISO 10077-1:2000); German version EN ISO 10077-1:2000) |
DIN EN ISO 10079-1-2000 |
医用吸引设备.第1部分:电驱动吸引设备.安全要求 |
(Medical suction equipment - Part 1: Electrically powered suction equipment; safety requirements (ISO 10079-1:1999); German version EN ISO 10079-1:1999) |
DIN EN ISO 10079-2-2000 |
医用吸引设备.第2部分:手动吸引设备. |
(Medical suction equipment - Part 2: Manually powered suction equipment (ISO 10079-2:1999); German version EN ISO 10079-2:1999) |
DIN EN ISO 10079-3-2000 |
医用吸引设备.第3部分:动力来源于真空容器或压力源的吸引设备 |
(Medical suction equipment - Part 3: Suction equipment powered from a vacuum or pressure source (ISO 10079-3:1999); German version EN ISO 10079-3:1999) |
DIN EN ISO 10081-1-2005 |
致密成型耐火产品的分类.第1部分:硅酸铝 |
|
DIN EN ISO 10081-1-2005 |
致密成型耐火产品的分类.第1部分:硅酸铝 |
|
DIN EN ISO 10081-2-2005 |
致密成型耐火制品的分类.第2部分:含残留碳小于7%的碱性产品 |
|
DIN EN ISO 10081-2-2005 |
致密成型耐火制品的分类.第2部分:含残留碳小于7%的碱性产品 |
|
DIN EN ISO 10081-3-2005 |
致密成型耐火制品的分类.第3部分:含残留碳7%到50%的碱性产品 |
|
DIN EN ISO 10081-3-2005 |
致密成型耐火制品的分类.第3部分:含残留碳7%到50%的碱性产品 |
|
DIN EN ISO 10082-2000 |
塑料.酚醛树脂.定义和试验方法 |
(Plastics - Phenolic resins - Classification and test methods (ISO 10082:1999); German version EN ISO 10082:1999) |
DIN EN ISO 10087 Berichtigung 1-2001 |
DINENISO10087-1996的勘误 |
(Corrigendum to DIN EN ISO 10087:1996 (German version EN ISO 10087:1996/A1:2000)) |
DIN EN ISO 10087-1996 |
小型船舶.船体识别标记.编码体系 |
(Small craft - Hull identification - Coding system (ISO 10087:1995); German version EN ISO 10087:1996) |
DIN EN ISO 10088-2001 |
小型船舶.固定安装的燃料系统和固定的燃料箱 |
(Small craft - Permanently installed fuel systems and fixed fuel tanks (ISO 10088:2001); German version EN ISO 10088:2001) |
DIN EN ISO 10093-1999 |
塑料.燃烧试验.标准火源 |
(Plastics - Fire tests - Standard ignition sources (ISO 10093:1998); German version EN ISO 10093:1998) |
DIN EN ISO 10101-1-1998 |
天燃气.卡尔.菲舍尔法测定水含量.第1部分:引言 |
(Natural gas - Determination of water by the Karl Fischer method - Part 1: Introduction (ISO 10101-1:1993); German version EN ISO 10101-1:1998) |
DIN EN ISO 10101-2-1998 |
天燃气.卡尔.菲舍尔法测定水含量.第2部分:滴定法 |
(Natural gas - Determination of water by the Karl Fischer method - Part 2: Titration procedure (ISO 10101-2:1993); German version EN ISO 10101-2:1998) |
DIN EN ISO 10101-3-1998 |
天燃气.卡尔.菲舍尔法测定水含量.第3部分:库仑法 |
(Natural gas - Determination of water by the Karl Fischer method - Part 3: Coulometric procedure (ISO 10101-3:1993); German version EN ISO 10101-3:1998) |
DIN EN ISO 10111-2002 |
金属和其它无机覆盖层.单位面积质量的测量.重量分析法和化学分析法评述(ISO10111:2000) |
(Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2000); German version EN ISO 10111:2001)) |
DIN EN ISO 10133-2002 |
小型船舶.电力系统.超低电压直流电力设备 |
(Small craft - Electrical systems - Extra-low-voltage d.c. installations (ISO 10133:2000); German version EN ISO 10133:2000) |
DIN EN ISO 10139-1-2005 |
牙科学.活动义齿软衬材料.第1部分:短期材料 |
|
DIN EN ISO 10139-1-2005 |
牙科学.活动义齿软衬材料.第1部分:短期材料 |
|
DIN EN ISO 10139-2-2001 |
牙科学.可摘义齿用柔软衬垫材料.第2部分:长时间使用的材料 |
(Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use (ISO 10139-2:1999); German version EN ISO 10139-2:2001) |
DIN EN ISO 10156-2-2005 |
气瓶.气体和气体混合物.第2部分:毒气、腐蚀气和气体混合物的氧化能力的测定 |
|
DIN EN ISO 10211-1-1995 |
高层建筑中的热桥.热流和表面温度.第1部分:一般计算方法 |
(Thermal bridges in building construction - Heat flows and surface temperatures - Part 1: General calculation methods (ISO 10211-1:1995); Deutsche Fassung EN ISO 10211-1:1995) |
DIN EN ISO 10211-2-2001 |
建筑结构中的热桥.热流和表面温度计算.第2部分:线性热桥 |
(Thermal bridges in building construction - Calculation of heat flows and surface temperatures - Part 2: Linear thermal bridges (ISO 10211-2:2001); German version EN ISO 10211-2:2001) |
DIN EN ISO 10239 Berichtigung 1-2002 |
DINENISO10239:2001(ENISO10239:2000/AC:2002)勘误 |
(Corrigendum to DIN EN ISO 10239:2001 (EN ISO 10239:2000/AC:2002)) |
DIN EN ISO 10239-2001 |
小型船舶.液化石油气系统 |
(Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2000); German version EN ISO 10239:2000) |
DIN EN ISO 10240-1996 |
小型船舶.船长手册 |
(Small craft - Owner`s manual (ISO 10240:1995); German version EN ISO 10240:1996) |
DIN EN ISO 10240-2005 |
小艇.艇主手册 |
|
DIN EN ISO 10248-1999 |
液体薄膜.用形成薄膜的方法抽出悬液试样中的空气 |
(Fluid fertilizers - De-aeration of suspension samples by film disentrainment (ISO 10248:1996); German version EN ISO 10248:1999) |
DIN EN ISO 10249-1999 |
液体肥料.物理检验用试样的目测预检和制备 |
(Fluid fertilizers - Preliminary visual examination and preparation of samples for physical testing (ISO 10249:1996); German version EN ISO 10249:1999) |
DIN EN ISO 10253-1998 |
水质.用有中脉的骨条藻属和有三突的褐指藻属进行的海底藻类生长限制试验 |
(Water quality - Marine algal growth inhibition test with Skeletonema costatum and Phaeodactylum tricornutum (ISO 10253:1995); German version EN ISO 10253:1998) |
DIN EN ISO 10256-2004 |
冰球运动中头与脸的保护装置 |
(Head and face protection for use in ice hockey (ISO 10256:2003); German version EN ISO 10256:2003) |
DIN EN ISO 10256-2004 |
冰球运动中头与脸的保护装置 |
|
DIN EN ISO 10271-2002 |
牙科金属材料.腐蚀试验方法 |
(Dental metallic materials - Corrosion test methods (ISO 10271:2001); German version EN ISO 10271:2001) |
DIN EN ISO 10280-1996 |
钢和铁.钛含量测定.二安替比林基代甲烷分光光度法 |
(Steel and iron- Determination of titanium content - Diantipyrylmethane spectrophotometric method (ISO 10280:1991); German version EN ISO 10280:1995) |
DIN EN ISO 10289-2001 |
在金属衬底上金属和其它无机覆层的腐蚀试验的方法.用于腐蚀试验的试验样品和生产产品的分级 |
(Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests (ISO 10289:1999); German version EN ISO 10289:2001) |
DIN EN ISO 10301-1997 |
水质.易挥发卤化烃的测定.气相色谱法 |
(Water quality - Determination of highly volatile halogenated hydrocarbons - Gas-chromatographic methods (ISO 10301:1997); German version EN ISO 10301:1997) |
DIN EN ISO 10303-210-2002 |
工业自动化系统和集成.产品数据表示和信息交换.第210部分:应用协议.电子组件、互连和包装设计 |
(Industrial automation systems and integration - Product data representation and exchange - Part 210: Application protocol: Electronic assembly, interconnectet and packaging design (ISO 10303-210:2001); German version EN ISO 10303-210:2002, text in Englis |
DIN EN ISO 10304-1-1995 |
水质.固液态离子色谱法测定溶解的氟化物、氯化物、亚硝酸盐、亚磷酸盐、溴化物、硝酸盐和硫酸离子的测定 |
(Water quality - Determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions, using liquid chromatography of ions - Part 1: Method for water with low contamination (ISO 10304-1:1992); German version EN ISO 103 |
DIN EN ISO 10304-2-1996 |
水质.用液态离子色谱法测定已溶解的阴离子.第2部分:在废水中溴化物,氟化物,硝酸盐,亚硝酸盐,亚磷酸盐和硫酸 |
(Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 2: Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water (ISO 10304-2:1995); German version EN ISO 10304-2:1996) |
DIN EN ISO 10304-3-1997 |
水质.用液态离子色谱法测定已溶解的阴离子.第3部分:铬酸盐,碘化物,亚硫酸盐,硫氰酸盐和硫代硫酸酯的测定 |
(Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate (ISO 10304-3:1997); German version EN ISO 10304-3:1997) |
DIN EN ISO 10304-4-1999 |
水质.液态离子色谱法对已溶解的阴离子的测定.第4部分:低污染水中氯酸盐,氯化物,亚氯酸盐的测定 |
(Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO 10304-4:1997); German version EN ISO 10304-4:1999) |
DIN EN ISO 10306-1995 |
纺织品.棉纤维成熟度的空气流动法评定 |
(Textiles - Cotton fibres - Evaluation of maturity by the air flow method (ISO 10306:1993); German version EN ISO 10306:1995) |
DIN EN ISO 10308-1997 |
金属覆层.孔隙率检验复审 |
(Metallic coatings - Review of porosity tests (ISO 10308:1995); German version EN ISO 10308:1997) |
DIN EN ISO 10319-1996 |
土工织物.宽条拉伸试验 |
(Geotextiles - Wide-width tensile test (ISO 10319:1993); German version EN ISO 10319:1996) |
DIN EN ISO 10320-1999 |
土工织物和土工相关制品.现场鉴别 |
(Geotextiles and geotextile-related products - Identification on site (ISO 10320:1999); German version EN ISO 10320:1999) |
DIN EN ISO 10321-1996 |
土工织物.连接/接封上的宽条拉伸试验 |
(Geotextiles - Tensile test for joints/seams by wide-width method (ISO 10321:1992); German version EN ISO 10321:1996) |
DIN EN ISO 10322-1-1997 |
眼科光学.半成品眼镜坯.第1部分:单光透镜毛坯和多焦透镜坯规范 |
(Ophthalmic optics - Semi-finished spectacle lens blanks - Part 1: Specifications for single-vision and multifocal lens blanks (ISO 10322-1:1996); German version EN ISO 10322-1:1997) |
DIN EN ISO 10322-2-1997 |
眼科光学.半成品透镜坯.第2部分:分级强力透镜坯规范 |
(Ophthalmic optics - Semi-finished spectacle lens blanks - Part 2: Specifications for progressive power lens blanks (ISO 10322-2:1996); German version EN ISO 10322-2:1997) |
DIN EN ISO 10323-1995 |
牙科用旋转器械.盘片和轮的内径 |
(Dental rotary instruments - Bore diameters for discs and wheels (ISO 10323:1991); German version EN ISO 10323:1995) |
DIN EN ISO 10338-1998 |
光学及光学仪器.接触镜片.曲率的测定 |
(Optics and optical instruments - Contact lenses - Determination of curvature (ISO 10338:1996); German version EN ISO 10338:1997) |
DIN EN ISO 10339-1999 |
眼科光学.接触镜片.水凝胶接触镜片中水含量的测定 |
(Ophthalmic optics - Contact lenses - Determination of water content of hydrogel lenses (ISO 10339:1997); German version EN ISO 10339:1999) |
DIN EN ISO 10340-1996 |
光学和光学仪器.接触镜片可萃取材料的测定方法 |
(Optics and optical instruments - Contact lenses - Method for determining the extractable substances (ISO 10340:1995); German version EN ISO 10340:1996) |
DIN EN ISO 10341-1999 |
眼科仪器.综合屈光检验仪 |
(Ophthalmic instruments - Refractor heads (ISO 10341:1997); German version EN ISO 10341:1999) |
DIN EN ISO 10342-1999 |
眼科仪器.眼屈光计 |
(Ophthalmic instruments - Eye refractometers (ISO 10342:1997); German version EN ISO 10342:1999) |
DIN EN ISO 10343-1999 |
眼科仪器.角膜屈度计 |
(Ophthalmic instruments - Ophthalmometers (ISO 10343:1997); German version EN ISO 10343:1999) |
DIN EN ISO 10344-1998 |
光学及光学仪器.接触镜片.接触镜片检验用食盐溶液 |
(Optics and optical instruments - Contact lenses - Saline solution for contact lens testing (ISO 10344:1996); German version EN ISO 10344:1998) |
DIN EN ISO 10350-1-2001 |
塑料.可比单点值的获取和表示法.第1部分:注模材料 |
(Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:1998); German version EN ISO 10350-1:2000) |
DIN EN ISO 10350-2-2001 |
塑料.可比单点数据的采集和表示.第2部分:长纤维增强塑料 |
(Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2001); German version EN ISO 10350-2:2001) |
DIN EN ISO 10352-1997 |
纤维增强塑料.模制化合物和聚酯胶片.单位面积质量的测定 |
(Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area (ISO 10352:1997); German version EN ISO 10352:1997) |
DIN EN ISO 10360-1-2003 |
产品几何量技术规范(GPS).坐标测量仪(CMM)验收和再检定试验.第1部分:词汇 |
(Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000 + Corr 1:2002) (includes Corrigendum AC:2002); German version EN ISO 10360-1:2000 + AC:2002) |
DIN EN ISO 10360-2-2002 |
产品几何量技术规范(GPS).坐标测量仪(CMM)验收试验.第2部分:测量尺寸使用的坐标测量仪 |
(Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring size (ISO 10360-2:2001); German version EN ISO 13060-2:2001) |
DIN EN ISO 10360-3-2000 |
几何产品规范(GPS).坐标式测量设备(CMM)的验收和再鉴定试验.第3部分:旋转台的轴线作为第四条轴线的坐标式测 |
(Geometrical Product Specifications (GPS) - Acceptance test and reverification test for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis (ISO 10360-3:2000); German version EN ISO 10360-3:2000) |
DIN EN ISO 10360-4-2003 |
产品几何量技术规范(GPS).坐标测量仪(CMM)的验收和再检定试验.第4部分:扫描型坐标机 |
(Geometrical Product Specifications (GPS) - Acceptance test and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning mode (ISO 10360-4:2000 + Cor. 1:2002) (includes Corrigendum AC:2002); German version EN ISO 10360- |
DIN EN ISO 10360-5-2001 |
几何产品规范(GPS).坐标测量设备(CMM)的验收和再鉴定试验.第5部分:使用多针笔探测系统的坐标式测量设备 |
(Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using multiple stylus probing systems (ISO 10360-5:2000); German version EN ISO 10360-5:2000) |
DIN EN ISO 10360-6-2002 |
产品几何量技术规范(GPS).坐标测量机(CMM)的验收和复检试验.第6部分:计算高斯相关特性误差的估计 |
(Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001); German version EN ISO 10360-6:2001) |
DIN EN ISO 10363-1995 |
热熔粘胶剂.热稳定性测定 |
(Hot-melt adhesives - Determination of thermal stability (ISO 10363:1992); German version EN ISO 10363:1995) |
DIN EN ISO 10365-1995 |
粘合剂.主要失效型式的名称与符号 |
(Adhesives - Designation of main failure patterns (ISO 10365:1992); German version EN ISO 10365:1995) |
DIN EN ISO 10366-1-2003 |
塑料.甲基丙烯酸甲酯/丁二烯/苯乙烯共聚物(ABS)的模塑和挤塑材料.第1部分:命名系统和规范基础 |
(Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 10366-1:2002); German version EN ISO 10366-1:2002) |
DIN EN ISO 10366-2-1999 |
塑料.甲基丙烯酸甲酯/丙烯腈/丁二烯/苯乙烯模制和挤塑材料.第2部分:试验试样的制备和性能测定 |
(Plastics - Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:1994); German version EN ISO 10366-2:1999) |
DIN EN ISO 10366-2-2004 |
塑料.甲基丙烯酸甲酯/丙烯腈/丁二烯/苯乙烯(MABS)模塑和挤塑材料.第2部分:试样制备和性能测定 |
|
DIN EN ISO 10370-1995 |
石油产品.碳渣的测定.微米法 |
(Petroleum products - Determination of carbon residue - Micro method (ISO 10370:1993); German version EN ISO 10370:1995) |
DIN EN ISO 10417-2005 |
石油和天然气工业.井下安全阀系统.设计、安装、操作和修整 |
|
DIN EN ISO 10417-2005 |
石油和天然气工业.井下安全阀系统.设计、安装、操作和修整 |
|
DIN EN ISO 10418-2005 |
石油和天然气工业.近海生产装置.基础表面操作安全系统 |
|
DIN EN ISO 10418-2005 |
石油和天然气工业.近海生产装置.基础表面操作安全系统 |
|
DIN EN ISO 1042-1999 |
实验室玻璃器皿.单列刻度量瓶 |
(Laboratory glassware - One-mark volumetric flasks (ISO 1042:1998); German version EN ISO 1042:1999) |
DIN EN ISO 10423-2003 |
石油和天然气工业.钻井和开采设备.井口设施和采油树设备 |
(Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2001); German and English version EN ISO 10423:2001) |
DIN EN ISO 10423-2005 |
石油和天然气工业.钻井和开采设备.井口设施和采油树设备 |
|
DIN EN ISO 10423-2005 |
石油和天然气工业.钻井和开采设备.井口设施和采油树设备 |
|
DIN EN ISO 10424-1-2005 |
石油和天然气工业.旋转钻井设备.第1部分:旋转钻杆件 |
|
DIN EN ISO 10424-1-2005 |
石油和天然气工业.旋转钻井设备.第1部分:旋转钻杆件 |
|
DIN EN ISO 10426-1-2002 |
石油和天然气工业.井水泥灌浆用水泥和材料.第1部分:规范 |
(Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification (ISO 10426-1:2000); German version EN ISO 10426-1:2000) |
DIN EN ISO 10427-1-2003 |
石油和天然气工业.套管扶正器.第1部分:弓形弹簧式套管扶正器 |
(Petroleum and natural gas industries - Casing centralizers - Part 1: Bow-spring casing centralizers (ISO 10427-1:2001); German and English version EN ISO 10427-1:2001) |
DIN EN ISO 10427-2-2005 |
石油和天然气工业.固井用设备.第2部分:扶正器的放置和限动环的检测 |
|
DIN EN ISO 10427-2-2005 |
石油和天然气工业.固井用设备.第2部分:扶正器的放置和限动环的检测 |
|
DIN EN ISO 1043-1-2002 |
塑料的符号和缩略语.第1部分:基本聚合物及其专有特性 |
(Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2001); German version EN ISO 1043-1:2002) |
DIN EN ISO 1043-2-2002 |
塑料.符号和缩略语.第2部分:填充剂及加强材料 |
(Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2000); German version EN ISO 1043-2:2001) |
DIN EN ISO 1043-3-2000 |
塑料.符号和缩略语.第3部分:增塑剂 |
(Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:1996); German version EN ISO 1043-3:1999) |
DIN EN ISO 1043-4-2000 |
塑料.符号和缩略语.第4部分:阻燃剂 |
(Plastics - Symbols and abbreviated terms - Part 4: Flame retardants (ISO 1043-4:1998); German version EN ISO 1043-4:1999) |
DIN EN ISO 10432-2000 |
石油和天燃气工业.下山巷道设备.地下安全阀规范 |
(Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:1999); German version EN ISO 10432:1999) |
DIN EN ISO 10432-2005 |
石油和天然气工业.下降孔设备.地下安全阀设备 |
|
DIN EN ISO 10432-2005 |
石油和天然气工业.下降孔设备.地下安全阀设备 |
|
DIN EN ISO 10434-2005 |
石油、石油化学和相关工业用螺栓帽状钢闸阀 |
|
DIN EN ISO 10437-2005 |
石油、石油化学和天然气工业.专用汽轮机 |
|
DIN EN ISO 10437-2005 |
石油、石油化学和天然气工业.专用汽轮机 |
|
DIN EN ISO 10438-1-2005 |
石油、石油化学和天然气工业.润滑、油封、控油系统和辅助装置.第1部分:一般要求 |
|
DIN EN ISO 10438-1-2005 |
石油、石油化学和天然气工业.润滑、油封、控油系统和辅助装置.第1部分:一般要求 |
|
DIN EN ISO 10438-2-2005 |
石油、石油化学和天然气工业.润滑、油封、控油系统和辅助装置.第2部分:专用油系统 |
|
DIN EN ISO 10438-2-2005 |
石油、石油化学和天然气工业.润滑、油封、控油系统和辅助装置.第2部分:专用油系统 |
|
DIN EN ISO 10438-3-2005 |
石油、石油化学和天然气工业.润滑、油封、控油系统和辅助装置.第3部分:通用油系统 |
|
DIN EN ISO 10438-3-2005 |
石油、石油化学和天然气工业.润滑、油封、控油系统和辅助装置.第3部分:通用油系统 |
|
DIN EN ISO 10438-4-2005 |
石油、石油化学和天然气工业.润滑、油封、控油系统和辅助装置.第4部分:自动气封支撑系统 |
|
DIN EN ISO 10438-4-2005 |
石油、石油化学和天然气工业.润滑、油封、控油系统和辅助装置.第4部分:自动气封支撑系统 |
|
DIN EN ISO 10439-2004 |
石油、化学、气体工业.离心压缩机 |
(Petroleum, chemical and lgas service industries - Centrifugal compressors (ISO 10439:2002); German and English version EN ISO 10439:2002) |
DIN EN ISO 10439-2004 |
石油、化学、气体工业.离心压缩机 |
|