标准号 |
中文名称 |
英文名称 |
| ISO 1183-3-1999 |
塑料.非泡沫塑料的密度测定方法.第3部分:气体比重瓶测量法 |
Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method |
| ISO 11833-1-1998 |
塑料.未增塑聚氯乙烯薄板.类型、尺寸和特征.第1部分:厚度不低于1mm的薄板 |
(Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm) |
| ISO 11833-2-1998 |
塑料.未增塑聚氯乙烯薄板.类型、尺寸和特征.第2部分:厚度低于1mm的薄板 |
Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm |
| ISO 11835-2002 |
道路车辆.带防抱制动系统(ABS)的机动车.制动性能的测量 |
Road vehicles - Motor vehicles with antilock braking systems (ABS) - Measurement of braking performance |
| ISO 11838-1997 |
摩托车和摩托车驾驶员运动学.词汇 |
Motorcycle and motorcycle-rider kinematics - Vocabulary |
| ISO 11841-1-2000 |
道路车辆和内燃发动机.过滤器词汇.第1部分:过滤器和过滤器件定义 |
Road vehicles and internal combustion engines - Filter vocabulary - Part 1: Definitions of filters and filter components |
| ISO 11841-2-2000 |
道路车辆和内燃发动机.过滤器词汇.第2部分:过滤器及其件特性的定义 |
Road vehicles and internal combustion engines - Filter vocabulary - Part 2: Definitions of characteristics of filters and their components |
| ISO 11843-1 Technical Corrigendum 1-2003 |
检测能力.第1部分:术语和定义.技术勘误1 |
|
| ISO 11843-1-1997 |
检测的能力.第1部分:术语和定义 |
(Capability of detection - Part 1: Terms and definitions) |
| ISO 11843-2-2000 |
检测的能力.第2部分:线性校准方法 |
(Capability of detection - Part 2: Methodology in the linear calibration case) |
| ISO 11843-3-2003 |
检测能力.第3部分:在无校准数据可采用情况下测定反应变量关键值 |
(Capability of detection - Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used) |
| ISO 11843-3-2003 |
检测能力.第3部分:在无校准数据可采用情况下测定反应变量关键值 |
|
| ISO 11843-4-2003 |
检测能力.第4部分:用最小可检测值与给定值相比对的方法 |
|
| ISO 11845-1995 |
金属和合金的腐蚀.腐蚀试验的一般原则 |
(Corrosion of metals and alloys - General principles for corrosion testing) |
| ISO 11846-1995 |
金属和合金的腐蚀.腐蚀试验的一般原则.测定溶解热处理铝合金的耐晶间腐蚀性 |
(Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys) |
| ISO 1185-2003 |
道路车辆.牵引车和挂车之间电气连接用连接器.带24V标称电源电压的车辆用24N(标准)型7极连接器 |
(Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage ) |
| ISO 1185-2003 |
道路车辆.牵引车和挂车之间电气连接用连接器.带24V标称电源电压的车辆用24N(标准)型7极连接器 |
|
| ISO 11850-2003 |
林业机械.自行式机械.安全要求 |
(Machinery for forestry - Self-propelled machinery - Safety requirements ) |
| ISO 11850-2003 |
林业机械.自行式机械.安全要求 |
|
| ISO 11857-1999 |
纺织地板覆盖物.剥离抗性的测定 |
(Textile floor coverings - Determination of resistance to delamination) |
| ISO 11858-1999 |
铺地织物.接触泡沫易碎性的测定 |
(Textile floor coverings - Determination of friability of attached foams) |
| ISO 11859-1999 |
纺织地板覆盖物.纯毛手编地毯.规范 |
(Textile floor coverings - Pure wool, hand-knotted pile carpets - Specification) |
| ISO 11860-1999 |
铺地织物.黄麻地毯背面纤维.规范 |
(Textile floor coverings - Jute carpet backing fabric - Specification) |
| ISO 11861-1999 |
纺织地板覆盖物.椰壳粗纤维垫.类型和规范 |
Textile floor coverings - Coir mats - Types and specification |
| ISO 11862-1993 |
土方机械.辅助起动示意信号电联结器 |
(Earth-moving machinery; auxiliary starting aid electrical connector) |
| ISO 11865-1995 |
速溶奶粉.白斑点的测定 |
(Instant whole milk powder - Determination of white flecks number) |
| ISO 11866-1-1997 |
牛奶和奶制品.推测大肠杆菌的计算.第1部分:概略数量技术 |
(Milk and milk products - Enumeration of presumptive Escherichia coli - Part 1: Most probable number technique) |
| ISO 11866-2-1997 |
奶和奶制品.大肠埃希杆菌的计数.第2部分:利用4-甲基馓形科(β)-D-葡糖苷酸(MUG)的最大可能值技术 |
(Milk and milk products - Enumeration of presumptive Escherichia coli - Part 2: Most probable number technique using 4-methylumbelliferyl--D-glucuronide (MUG)) |
| ISO 11866-3-1997 |
奶和奶制品.大肠埃希杆菌的估算.第3部分:在40℃时利用膜状物对奶制品的菌落计数技术 |
(Milk and milk products - Enumeration of presumptive Escherichia coli - Part 3: Colony-count technique at 44 C using membranes) |
| ISO 11868-1997 |
热处理牛奶.乳果糖含量的测定.高效液体色谱分析法 |
(Heat-treated milk - Determination of lactulose content - Method using high-performance liquid chromatography) |
| ISO 11869-1997 |
酸牛奶.滴定酸度的测定.电位测量法 |
(Yoghurt - Determination of titratable acidity - Potentiometric method) |
| ISO 11870-2000 |
牛奶和牛奶制品.脂肪含量的测定.油脂计法使用的一般指南 |
(Milk and milk products - Determination of fat content - General guidance on the use of butyrometric methods) |
| ISO 1188-1984 |
电影技术.全涂磁的16mm电影胶片上磁性声带的录音特性.规范 |
(Cinematography; Recorded characteristic for magnetic sound on full-coat 16 mm motion-picture film; Specifications) |
| ISO 11881 Technical Corrigendum 1-1999 |
金属和合金的腐蚀.铝合金的片状剥落腐蚀试验.技术勘误1 |
(Corrosion of metals and alloys - Exfoliation corrosion testing of aluminium alloys; Technical Corrigendum 1) |
| ISO 11881-1999 |
金属和合金腐蚀.铝合金剥离腐蚀试验 |
(Corrosion of metals and alloys - Exfoliation corrosion testing of aluminium alloys) |
| ISO 11882-1997 |
光学和光学仪器.显微镜.35mmSLR摄影机(适用T形螺纹)的接口连接 |
(Optics and optical instruments - Microscopes - Interfacing connection for 35 mm SLR photo cameras (T-thread adaptation)) |
| ISO 11883-1997 |
光学和光学仪器.显微镜.对立体显微镜作标记 |
Optics and optical instruments - Microscopes - Marking of stereomicroscopes |
| ISO 11884-1-1998 |
光学和光学仪器.立体显微镜的最低要求.第1部分:普通立体显微镜 |
(Optics and optical instruments - Minimum requirements for stereomicroscopes - Part 1: Stereomicroscopes for general use) |
| ISO 11884-2-1997 |
光学和光学仪器.实体显微镜的最低要求.第2部分:高性能显微镜 |
(Optics and optical instruments - Minimum requirements for stereomicroscopes - Part 2: High performance microscopes) |
| ISO 11885-1996 |
水质.引导耦合等离子体原子发射光谱法测定33种素 |
(Water quality - Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy) |
| ISO 11886-2002 |
房屋建筑机械设备.打桩驱动和提取设备.术语和商业规范 |
(Building construction machinery and equipment - Pile driving and extracting equipment - Terminology and commercial specification) |
| ISO 1189-1986 |
电影技术.在35mm电影胶片上除成条发行拷贝外的磁性声带的录音特性.规范 |
(Cinematography; Recorded characteristic for magnetic sound records on 35 mm motion-picture film excluding striped release prints; Specifications) |
| ISO 11890-1-2000 |
涂料和清漆.挥发性有机化合物含量的测定.第1部分:差别法 |
(Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method) |
| ISO 11890-2-2000 |
涂料和清漆.挥发性有机化合物含量的测定.第2部分:气相色谱法 |
(Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method) |
| ISO 11897-1999 |
包装.热塑软薄膜制袋.折边处的撕裂扩展试验 |
(Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds) |
| ISO 11898 AMD 1-1995 |
道路车辆.数字信息交换.高速通信用局域网络控制器.第1次修改 |
(Road vehicles - Interchange of digital information - Controller area network (CAN) for high-speed communication; Amendment 1) |
| ISO 11898-1-2003 |
道路车辆.控制器局域网络.第1部分:数据链层和物理信令 |
(Road vehicles - Controller area network (CAN) - Part 1: Data link layer and physical signalling) |
| ISO 11898-1-2003 |
道路车辆.控制器局域网络.第1部分:数据链层和物理信令 |
|
| ISO 11898-1993 |
道路车辆.数字信息交换.高速通信用局域网控制器 |
(Road vehicles; interchange of digital information; controller area network (CAN) for high-speed communication) |
| ISO 11898-2-2003 |
道路车辆.控制器局域网络.第2部分:高速媒体存取单 |
(Road vehicles - Controller area network (CAN) - Part 2: High-speed medium access unit) |
| ISO 11898-2-2003 |
道路车辆.控制器局域网络.第2部分:高速媒体存取单 |
|
| ISO 11898-4-2004 |
道路车辆.控制器局域网络.第4部分:时间触发通信 |
|
| ISO 119-1977 |
塑料.酚-甲醛模塑.单体酚的测定.碘量法 |
Plastics; Phenol-formaldehyde mouldings; Determination of free phenols; Iodometric method |
| ISO 1190-1-1982 |
铜和铜合金.名称与牌号表示规则.第1部分:材料的名称与符号 |
Copper and copper alloys; Code of designation; Part 1 : Designation of materials |
| ISO 11900-1-1994 |
压制用工具.球形闸门凸模固定板.第1部分:小功率用A或B型、矩形及正方形 |
(Tools for pressing - Ball-lock punch retainers - Part 1: Types A and B, rectangular and square for light duty) |
| ISO 11900-2-2001 |
压制用工具.球形闸门凸模固定板.第2部分:小功率用C和D型 |
(Tools for pressing - Ball-lock punch retainers - Part 2: Types C and D, reduced for light duty) |
| ISO 11900-3-2004 |
冲压工具.球锁紧冲头固定板.第3部分:用于重载荷的减径E型固定板 |
|
| ISO 11900-3-2004 |
冲压工具.球锁紧冲头固定板.第3部分:用于重载荷的减径E型固定板 |
|
| ISO 11901-1-1995 |
压力工具.气压弹簧.第1部分:总规范 |
(Tools for pressing - Gas springs - Part 1: General specifications) |
| ISO 11901-1-2003 |
冲压工具.气压弹簧.第1部分:一般规范 |
|
| ISO 11901-1-2003 |
冲压工具.气压弹簧.第1部分:一般规范 |
|
| ISO 11901-2-2004 |
冲压工具.气压弹簧.第2部分:附件规范 |
|
| ISO 11901-2-2004 |
冲压工具.气压弹簧.第2部分:附件规范 |
|
| ISO 11903-1996 |
压力加工工具.承载墩安装指南 |
Tools for pressing - Guide pillar mountings |
| ISO 11904-1-2002 |
声学.从接近耳朵的声源处测定声排放强度.利用真耳中传声器技术(MIRE技术) |
Acoustics - Determination of sound immission from sound sources placed close for the ear - Part 1: Technique using a microphone in a real ear (MIRE technique) |
| ISO 11904-2-2004 |
声学.从接近耳朵的声源处测定声排放强度.第2部分:利用人体模型技术 |
|
| ISO 11904-2-2004 |
声学.从接近耳朵的声源处测定声排放强度.第2部分:利用人体模型技术 |
|
| ISO 11905-1-1997 |
水质.氮的测定.第1部分:用过氧焦硫酸盐进行氧化溶解的方法 |
(Water quality - Determination of nitrogen - Part 1: Method using oxidative digestion with peroxodisulfate) |
| ISO 11906-1999 |
显微制图术.缩微胶片系列.操作过程 |
Micrographics - Microfilming of serials - Operating procedures |
| ISO 11907-1-1998 |
塑料.烟雾产生.灭火废液腐蚀性的测定.第1部分:导则 |
Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Part 1: Guidance |
| ISO 11907-2-1995 |
塑料制品.火焰冲击波的测定.第2部分:静态法 |
Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Part 2: Static method |
| ISO 11907-3-1998 |
塑料.烟雾产生.灭火废液腐蚀性的测定.第3部分:使用移动式熔炉的动态分解法 |
Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Part 3: Dynamic decomposition method using a travelling furnace |
| ISO 11907-4-1998 |
塑料.烟雾产生.灭火废液腐蚀性的测定.第4部分:使用热辐射式加热器的动态分解法 |
Plastics - Smoke generation - Determination of the corrosivity of fire effluents - Part 4: Dynamic decomposition method using a conical radiant heater |
| ISO 11908-1996 |
清漆和涂料用粘接剂.胺树脂.一般检验法 |
Binders for paints and varnishes - Amino resins - General methods of test |
| ISO 11909-1996 |
清漆和涂料用粘接剂.聚异氰酸树脂.一般检验法 |
Binders for paints and varnishes - Polyisocyanate resins - General methods of test |
| ISO 11922-1-1997 |
流体传输用热塑管.尺寸和公差.第1部分:米制系列 |
Thermoplastics pipes for the conveyance of fluids - Dimensions and tolerances - Part 1: Metric series |
| ISO 11922-2-1997 |
流体传输用热塑管.尺寸和公差.第2部分:英制系列 |
Thermoplastics pipes for the conveyance of fluids - Dimensions and tolerances - Part 2: Inch-based series |
| ISO 11923-1997 |
水质.测定通过玻璃纤维过滤器过滤的悬浮固体 |
Water quality - Determination of suspended solids by filtration through glass-fibre filters |
| ISO 11925-2-2002 |
对火反应试验.直接受火的建筑制品的可燃性.第2部分:单一火源试验 |
Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 2: Single-flame source test |
| ISO 11925-3 Technical Corrigendum 1-1998 |
防火试验的反作用.经受火焰直接熏烤的建筑产品的可燃性.第3部分:多个火焰源试验.技术勘误1 |
(Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 3: Multi-source test; Technical Corrigendum 1) |
| ISO 11925-3-1997 |
防火试验的反作用.受火焰直接熏烤的建筑产品的可燃性.第3部分:多个火焰源试验 |
Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 3: Multi-source test |
| ISO 11926-1-1995 |
通用和流体动力的连接器.有ISO 725 英制螺纹和O型密封环的螺孔和双端螺栓.第1部分:削顶房的O型密封环的螺孔 |
(Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 1: Ports with O-ring seal in truncated housing) |
| ISO 11926-2-1995 |
通用和流体动力的连接器.有ISO 725 英制螺纹和O型密封环的螺孔和双端螺栓.第2部分:重型(S 系列)双端螺栓 |
(Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 2: Heavy-duty (S series) stud ends) |
| ISO 11926-3-1995 |
通用和流体动力的连接器.有ISO 725 英制螺纹和O型密封环的螺孔和双端螺栓.第3部分:轻型(L 系列)双端螺栓 |
(Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 3: Light-duty (L series) stud ends) |
| ISO 11928-1-2000 |
缩微照相.图解COM记录器的质量控制.第1部分:试验框架的特征 |
(Micrographics - Quality control of graphic COM recorders - Part 1: Characteristics of the test frames) |
| ISO 11928-2-2000 |
显微制图学.图解的COM记录器的质量控制.第2部分:质量标准和控制 |
(Micrographics - Quality control of graphic COM recorders - Part 2: Quality criteria and control) |
| ISO 11929-1-2000 |
电离辐射测量的检测限值和决定范围的测定.第1部分:原理和在不考虑样品处理影响的计数测量法中的应用 |
(Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 1: Fundamentals and application to counting measurements without the influence of sample treatment) |
| ISO 11929-2-2000 |
电离辐射测量的检测限值和决定范围的测定.第2部分:原理和在考虑样品处理影响的计数测量法中的应用 |
(Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 2: Fundamentals and application to counting measurements with the influence of sample treatment) |
| ISO 11929-3-2000 |
电离辐射测量的检测限值和决定范围的测定.第3部分:原理和在不考虑样品处理影响的高分辨率γ射线光谱计数测 |
(Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 3: Fundamentals and application to counting measurements by high resolution gamma spectrometry, without the influence of sample treatment) |
| ISO 11929-4-2001 |
电离辐射测量的检测限值和决定范围的测定.第4部分:在没有样品处理的影响时用模拟速率计的通过线性刻度测量 |
(Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 4: Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment) |
| ISO 11932-1996 |
被考虑用于再循环、再使用或作为非放射性废物处理的固体材料的活性测量 |
(Activity measurements of solid materials considered for recycling, re-use, or disposal as non-radioactive waste) |
| ISO 11933-1-1997 |
密封罩用组件.第1部分:手套/布袋口,手套/布袋盖,密封环和互换部件 |
(Components for containment enclosures - Part 1: Glove/bag ports, bungs for glove/bag ports, enclosure rings and interchangeable units) |
| ISO 11933-2-1997 |
密封罩用组件.第2部分:机械手和遥控操作抓手用手套,焊接袋,鞋罩 |
(Components for containment enclosures - Part 2: Gloves, welded bags, gaiters for remote-handling tongs and for manipulators) |
| ISO 11933-3-1998 |
密封罩用组件.第3部分:光面门用传送系统、气闸室、双开门用传送系统和废鼓形容器的密封连接 |
(Components for containment enclosures - Part 3: Transfer systems such as plain doors, airlock chambers, double door transfer systems, leaktight connections for waste drums) |
| ISO 11933-4-2001 |
密封罩用组件.第4部分:通风和气体清洁系统(如,过滤器和疏水阀)的安全和规定.阀门、控制和保护装置 |
(Components for containment enclosures - Part 4: Ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices) |
| ISO 11933-5-2001 |
密封罩用组件.第5部分:电路和液压管路的渗透性 |
(Components for containment enclosures - Part 5: Penetrations for electrical and fluid circuits) |
| ISO 11940-1998 |
信息和文献工作.泰国字母的译音 |
(Information and documentation - Transliteration of Thai) |
| ISO 11943-1999 |
液压动力.液体在线自动颗粒计数系统.校正和合法性方法 |
(Hydraulic fluid power - On-line automatic particle-counting systems for liquids - Methods of calibration and validation) |
| ISO 11948-1-1996 |
小便吸收装置.第1部分:整品检验 |
(Urine-absorbing aids - Part 1: Whole-product testing) |
| ISO 11948-2-1998 |
小便吸收装置.第2部分:轻度不能自制与低压条件下短时间液体释放(泄漏)的测定 |
(Urine-absorbing aids - Part 2: Determination of short-time liquid release (leakage) under conditions of light incontinence and low pressure) |
| ISO 11949-1995 |
冷轧电解马口铁 |
(Cold-reduced electrolytic tinplate) |
| ISO 11950-1995 |
冷轧电解铬/氧化铬涂层钢 |
(Cold-reduced electrolytic chromium/chromium oxide-coated steel) |
| ISO 11951-1995 |
镀锡薄钢板或电解铬/镀氧化铬钢生产用卷绕形冷轧黑钢板 |
(Cold-reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide-coated steel) |
| ISO 11957-1996 |
声学.客舱隔音功能的测定.实验室和现场测量 |
(Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements) |
| ISO 11960 Technical Corrigendum 1-2002 |
石油和天然气工业.油井套管或油管用钢管.技术勘误1 |
(Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells; Technical Corrigendum 1) |
| ISO 11960-2001 |
石油和天然气工业.油井套管和油管用钢管 |
(Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells) |
| ISO 11960-2004 |
石油和天然气工业.油井套管和油管用钢管 |
|
| ISO 11961-1996 |
石油和天然气工业.钻井杆用钢管规范 |
(Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification) |
| ISO 11962-2002 |
缩微照相.带16mm和35mm缩微胶卷用成象标记(雷达显示的影像) |
(Micrographics - Image mark (blip) used with 16 mm and 35 mm roll microfilm) |
| ISO 11963-1995 |
塑料.聚碳酸酯薄板材的类型、尺寸和特性 |
(Plastics - Polycarbonate sheets - Types, dimensions and characteristics) |
| ISO 11969-1996 |
水质.砷的测定.原子吸收分光光度法(氢化技术) |
(Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique)) |
| ISO 11970-2001 |
钢铸件产品焊接的焊接程序的验收和规范 |
(Specification and approval of welding procedures for production welding of steel castings) |
| ISO 11971-1997 |
钢制铸件表观质量的外观检查 |
(Visual examination of surface quality of steel castings) |
| ISO 11972-1998 |
普通耐腐蚀铸钢 |
(Corrosion-resistant cast steels for general applications) |
| ISO 11973-1999 |
一般用途热阻铸造钢及合金 |
(Heat-resistance cast steels and alloys for general applications) |
| ISO 11978-2000 |
眼科光学.接触镜片和接触镜片维护产品.制造商提供的信息 |
(Ophthalmic optics - Contact lenses and contact lens care products - Information supplied by the manufacturer) |
| ISO 11979-1-1999 |
眼科植入物.眼内晶状体.第1部分:词汇 |
(Opthalmic implants - Intraocular lenses - Part 1: Vocabulary) |
| ISO 11979-2 Technical Corrigendum 1-2003 |
眼科植入物.眼内透镜.第2部分:光学特性和测试方法.技术勘误1 |
|
| ISO 11979-2 Technical Corrigendum 1-2003 |
眼科植入物.眼内透镜.第2部分:光学特性和测试方法.技术勘误1 |
|
| ISO 11979-2-1999 |
眼科植入.眼内镜片.第2部分:光学特性和试验方法 |
(Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com