标准号 |
中文名称 |
英文名称 |
| DIN 54333-1-1981 |
纺织品的检验.燃烧性能的测定.用水平法.由布边燃烧点火 |
(Testing of textiles; determination of burning behaviour; horizontal method; ignition at the edge of the specimen) |
| DIN 54334-1975 |
纺织品的检验.燃烧性能的测定.点燃时间.由布边燃烧点火 |
(Testing of textiles; determination of the burning behaviour; minimum ignition time, edge ignition) |
| DIN 54335-1977 |
纺织品的检验.燃烧性能的测定.用45°法.由布边燃烧点火 |
(Testing of textiles; determination of burning behaviour, 45-method, ignition on the edge of the specimen) |
| DIN 54341-1988 |
公交有轨车辆座椅的检验.用一个纸垫测定燃烧性能 |
(Testing of seats in railways for public traffic; determination of burning behaviour with a paper pillow ignition source) |
| DIN 54345-1-1992 |
纺织品检验.静电性能.电阻值的测定 |
(Testing of textiles; electrostatic behaviour; determination of electrical resistance) |
| DIN 54345-2-1991 |
纺织品的检验.静电性能.纺织地毯人行走产生电荷试验的测定 |
(Testing of textiles; electrostatic behaviour; determination of the charge of textile floor coverings by walking test) |
| DIN 54345-3-1985 |
纺织品的检验.静电性能.用机器法测定织物地毯负荷 |
(Testing of textiles; electrostatic behaviour; determination of electrostatic charge of textile floor coverings by machine) |
| DIN 54345-4-1985 |
纺织品的检验.静电性能.测定平面织物所带的静电值 |
(Testing of textiles; electrostatic behaviour; determination of electrostatic charge of textile fabrics) |
| DIN 54345-5-1985 |
纺织品的检验.静电性能.在平面织物的布条上测定电阻值 |
(Testing of textiles; electrostatic behaviour; determination of electrical restistance of strips of textile fabrics) |
| DIN 54345-6-1992 |
纺织品的检验.静电性能.铺地织物电阻值的测定 |
(Testing of textiles; electrostatic behaviour; determination of the electrical resistance of textile floor coverings) |
| DIN 5435-1980 |
手动泵.公称压力为1至2.5的带双孔法兰 |
(Hand-pumps; two hole tube flanges with shoulder, for nominal pressure 1 to 2,5) |
| DIN 54355-1977 |
纸浆的检验.纸浆抗苛性钠溶液性能的测定(抗碱性能) |
(Testing of pulp; determination of the stability of pulp against sodium hydroxide solution (alkali resistance)) |
| DIN 54356-1977 |
纸浆的检验.纸浆的碱溶性测定 |
(Testing of pulp; determination of the alkali solubility of pulp) |
| DIN 54357-1978 |
纸浆的检验.卡巴值的测定 |
(Testing of Pulp; Determination of the Kappa Number) |
| DIN 54360-2004 |
纸浆.实验室打浆.Jokro磨碎机法 |
|
| DIN 54361-1976 |
纸浆的检验.用糠醛法测定戊聚粮含量 |
(Testing of pulp; determination of pentosan content, furfural method) |
| DIN 54363-1980 |
纸浆和纸的检验.铁.锰.铜.钙和镁含量的测定.用原子吸收光谱分析法测定(AAS) |
(Testing of pulp and paper; determination of iron, manganese, copper, calcium and magnesium contents, determination by atomic absorption spectroscopy) |
| DIN 5437-1987 |
手动泵.叶轮泵.尺寸.功率.规格 |
(Hand pumps; semirotary pumps; sizes, performance and dimensions) |
| DIN 54370-1999 |
纸浆、纸和纸板的检验.灼烧残余物的测定 |
(Testing of pulp, paper and board - Determination of the residue on ignition) |
| DIN 54372-1988 |
纸浆和纸的试验.钙和镁含量的测定.滴定分析测定法 |
(Testing of pulp and paper; determination of calcium and magnesium content; titrimetric determination) |
| DIN 54373-1989 |
纸浆.纸和纸板的检验.灰分中酸不溶比例的测定 |
(Testing of pulp, paper and board; determination of acid insoluble proportion of ignition residue) |
| DIN 54375-1993 |
纸浆、纸和纸板的试验.用二乙基氨荒酸盐进行铜含量的光度测定.燃烧残余物的测定 |
(Testing of pulp, paper and board; photometric determination of copper content with diethyldithiocarbamat; determination in glow residue) |
| DIN 54376-1982 |
纸浆.纸和纸板的检验.锰含量测定.光度测量法 |
(Testing of pulp, paper and board; determination of manganese content; photometric method) |
| DIN 54377-1-1976 |
纸浆和纸的检验.用重力分析法测定二氧化硅的含量 |
(Testing of pulp and paper; determination of the silicium(IV)-oxid content, gravimetric method) |
| DIN 54377-2-1987 |
纸和纸浆的检验.用光度测量法测定二氧化硅的含量 |
(Testing of pulp and papier; determination of the silicium(IV)-oxid content; photometric method) |
| DIN 54378-1993 |
纸、纸板和厚板的检验.表面菌落计数的测定(OKZs) |
(Testing of paper and board; determination of the surface colony count OKZs) |
| DIN 54379-1992 |
纸.纸板和厚纸板的检验.总菌落计数测定(GKZ) |
(Testing of paper and board; determination of the total colony count) |
| DIN 54383-1979 |
纸.纸板和厚纸板的检验.克洛斯特里丁(Clostridien)发霉程度的测定 |
(Testing of paper and board; determination of spores of clostridium) |
| DIN 54400-1987 |
离子交换作用.概念 |
(Ion exchange; terminology) |
| DIN 54400-2004 |
离子交换.术语 |
|
| DIN 54401-2000 |
离子交换器试验(珠承型).取样 |
(Testing of ion exchangers (bead form) - Sampling) |
| DIN 54402-2001 |
离子交换器检验.阴离子交换器总效能测定 |
(Testing of ion exchangers - Determination of the total capacity of anion exchangers) |
| DIN 54403-2001 |
离子交换器检验.阳离子交换器总效能测定 |
(Testing of ion exchangers - Determination of the total capacity of cation exchangers) |
| DIN 54406-2000 |
离子交换器的试验(珠承型).抗渗透和流体力学应力的性能测定 |
(Testing of ion exchangers (bead form) - Determination of resistance to osmotic and hydromechanical stress) |
| DIN 54407-2003 |
离子交换树脂的试验.树脂珠粒粒度分布的测定 |
(Testing of ion exchange resins - Determination of bead size distribution) |
| DIN 54408-1998 |
离子交换器检验.堆积密度,平衡湿度和干燥物料成份的测定 |
(Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids) |
| DIN 54410-1985 |
离子交换器检验.密度测定 |
(Testing of ion exchangers; determination of density) |
| DIN 54411-1987 |
离子交换器的检验.泵压送法及用聚合物的吸附作用检验离子交换器 |
(Testing of ion exchangers; recycling method for testing ion exchangers and polymer adsorption resins) |
| DIN 54411-2004 |
离子交换器的检验.离子交换器和聚合物吸附树脂的循环检验方法 |
|
| DIN 54451-1978 |
金属粘合剂和金属粘结的检验.测定一种粘合剂在一段粘结中剪应力滑动图形用拉剪试验 |
(Testing of adhesives for metals and of bonded metal joints; tensile shear test for the determination of the shear stress-strain diagram of an adhesive in a bonded joint) |
| DIN 54452-1981 |
金属粘合剂和金属粘结的检验.压剪试验 |
(Testing of adhesives for metals and adhesively bonded metal joints; compression shear test) |
| DIN 54453-1982 |
金属粘合剂和金属粘结的检验.用旋转式粘度计测定厌氧粘合剂的动态粘度 |
(Testing of adhesives for metals and of bonded metal joints; dynamic viscosity determination of anaerobic adhesives by rotation viscometer) |
| DIN 54455-1984 |
金属粘合剂和金属粘结的检验.扭剪试验 |
(Testing of adhesives for metals and of bonded metal joints; torsional shear test) |
| DIN 54456-1989 |
粘胶材料结构及粘接的检验.耐气候性能试验 |
(Testing of structural adhesives; test of resistance to climatic conditions) |
| DIN 54461-2005 |
结构胶粘剂.粘合剂粘结牢度测试.弯曲剥离试验 |
|
| DIN 54500-1996 |
纸的检验.与密度相关的纤维及纸的光散射系数的测定 |
(Testing of paper - Determination of the density-related light-scattering and absorption coefficients of paper and fibre materials) |
| DIN 54500-2004 |
纸的检验.与密度相关的纤维及纸的光散射和吸光系数的测定 |
|
| DIN 54515-1983 |
纸和纸板的检验.拒水性的测定 |
(Testing of paper and board; determination of the waterrepellent properties) |
| DIN 54516-1985 |
纸和纸板的检验.抗开裂测定 |
(Testing of paper and board; determination of plybond resistance) |
| DIN 54516-2004 |
纸和纸板的检验.抗开裂测定 |
|
| DIN 54517-1985 |
纸和纸板的检验.湿延伸率的测定 |
(Testing of paper and board; measurement of dimensional change after immersion in water) |
| DIN 54518-1987 |
纸和纸板的检验.纸板条压缩阻力 |
(Testing of paper and board; compression strength, short span test) |
| DIN 54518-2004 |
纸和纸板的检验.短间距试验测定抗压强度 |
|
| DIN 54519-1993 |
纸板检验.实心纸板棱边浸入阻力的测定 |
(Testing of board; short span test of solid board) |
| DIN 54530-10-2000 |
纸和纸板.纸筒的检验.第10部分:表面粗糙度的测定 |
(Paper and board - Testing of cores - Part 10: Determination of surface roughness) |
| DIN 54540-4-1989 |
纸的检验.卫生纸检验.吸水量的测定 |
(Testing of paper; testing of sanitary papers; determination of water absorption) |
| DIN 54540-5-1989 |
纸的检验.卫生纸检验.潮湿延伸率的测定 |
(Testing of paper; testing of sanitary papers; determination of elongation after water absorption) |
| DIN 54540-5-2005 |
纸试验.薄页纸和薄纸制品.第5部分:吸水后伸长率的测定 |
|
| DIN 54540-6-1989 |
纸的检验.卫生纸检验.叠装吸水能力的测定 |
(Testing of paper; testing of sanitary papers; determination of water absorption of stacks) |
| DIN 54540-6-2005 |
纸试验.薄页纸和薄纸制品.第6部分:叠层吸水率的测定 |
|
| DIN 54540-9-1989 |
纸的检验.卫生纸检验.含湿量的测定 |
(Testing of paper; testing of sanitary papers; determination of moisture content) |
| DIN 54540-9-2005 |
纸试验.薄页纸和薄纸制品.第9部分:水分含量的测定 |
|
| DIN 546-1986 |
开槽圆螺母 |
(Slotted round nuts) |
| DIN 54600-1-1988 |
纸和纸板的检验.抗微生物添加剂的检验.四甲基秋兰姆化二硫的测定(TMTD) |
(Testing of paper and board; testing on antimicrobial additives; determination of tetramethylthiuramdisulfid content (TMTD)) |
| DIN 54600-11-1982 |
纸和纸板的检验.对抗微生物添加剂的检验.2-氧代-2(4-羟基苯基)正羟肟酰氯含量的测定 |
(Testing of paper and board; testing for antimicrobial additives; determination of 2-oxo-2(4`-hydroxyphenyl)acethydroximic acid chloride content) |
| DIN 54600-8-1982 |
纸和纸板的检验.护微生物添加剂的检验.甲叉及甲叉硫氰酸盐含量的测定 |
(Testing of paper and board; Testing for antimicrobial additives; Determination of the methylene-bis-thioscyanate content) |
| DIN 54603-1981 |
纸.纸板箱和纸板的检验.二乙醛含量的测定 |
(Testing of paper, boxboard and paper board; Determination of glyoxal content) |
| DIN 54604-1-1988 |
纸和纸板的检验.淀粉含量的测定品位天然淀粉酶的分析 |
(Testing of paper and board; determination of starch content; enzymatic analysis of native starch content) |
| DIN 54605-1993 |
纸浆.纸和纸板的检验.镉含量的AAS测定 |
(Testing of pulp, paper and board; atomic absorption spectrometric determination of the cadmium content) |
| DIN 54606-1-1995 |
纸的检验.已印刷过的旧纸可纸浆精化的标识.第1部分:浮选纸浆精化法 |
(Testing of paper - Identification of the flotation deinkability of printed recovered paper - Part 1: Flotation deinking method) |
| DIN 54606-2-1995 |
纸的检验.已印刷过的旧纸可纸浆精化的标识.第2部分:洗涤纸浆精化法 |
(Testing of paper - Identification of the wash deinkability of printed recovered paper - Part 2: Wash deinking method) |
| DIN 5464-1965 |
带直边的花键轴连接.重型系列 |
(Straight-sided Splines; Heavy Series) |
| DIN 5466-1-2000 |
花键接头,载荷能力计算.第1部分:一般基础 |
(Splined joints, calculation of load capacity - Part 1: General basis) |
| DIN 547-1986 |
端面带孔圆螺母 |
(Round nuts with drilled holes in one face) |
| DIN 5471-1974 |
机床.带4个键的花键轴和花键孔的剖面.内定心.尺寸 |
(Machine Tools; Spline Shafts and Spline Bore Profiles with 4 Splines, Internal Centering, Dimensions) |
| DIN 5472-1980 |
机床.带6齿的花键轴和花键套剖面.内径定心.尺寸 |
(Machine Tools; Spline Shafts and Spline Bore Profiles with 6 Splines; Internal Centering, Dimensions) |
| DIN 5473-1992 |
逻辑和集论.符号和定义 |
(Logic and set theory; symbols and concepts) |
| DIN 5477-1983 |
百分率.千分率.概念.应用 |
(Per cent, parts per thousand; concepts, use) |
| DIN 5478-1973 |
图示比例 |
(Scales in graphic representations) |
| DIN 548-1986 |
侧面带孔圆螺母 |
(Round nuts with set pin holes in side) |
| DIN 5480-1-1991 |
渐开线花键轴连接.基本概念 |
(Involute spline joints; principles) |
| DIN 5480-10-1991 |
渐开线花键轴连接.啮合角30°.模数5的基础尺寸和试验尺寸 |
(Involute spline joints; 30?pressure angle; basic dimensions and test dimensions for module 5) |
| DIN 5480-11-1991 |
渐开线花键轴连接.啮合角30°.模数6的基础尺寸和试验尺寸 |
(Involute spline joints; 30?pressure angle; basic dimensions and test dimensions for module 6) |
| DIN 5480-12-1991 |
渐开线花键轴连接.啮合角30°.模数8基础尺寸和试验尺寸 |
(Involute spline joints; 30?pressure angle; basic dimensions and test dimensions for module 8) |
| DIN 5480-13-1991 |
渐开线花键轴连接.啮合角30°.模数10基础尺寸和试验尺寸 |
(Involute splines joints; 30?pressure angle; basic dimensions and test dimensions for module 10) |
| DIN 5480-14-1986 |
渐开线花键轴连接.啮合角30°.侧面配合.公差 |
(Involute splines with 30?pressure angle; side fits, tolerances) |
| DIN 5480-15-1974 |
渐开线花键轴连接.齿面定中的检验和量规 |
(Involute Splines; Testing and Gauges for Side Fit) |
| DIN 5480-16-1986 |
渐开线花键轴连接.压力角30°.齿轮滚刀.插齿刀.拉刀 |
(Involute splines with 30 pressure angle; hobs, pinion type cutters, broaches) |
| DIN 5480-2-1991 |
渐开线花键轴连接.啮合角30°.概览 |
(Involute spline joints; 30?pressure angle; survey) |
| DIN 5480-3-1991 |
渐开线花键轴连接.啮合角30°.模数0.5、0.6、0.75、0.8和1的基础尺寸和试验尺寸 |
(Involute spline joints; 30?pressure angle; basic dimensions and test dimensions for modules 0,5, 0,6, 0,75, 0,8 and 1) |
| DIN 5480-4-1991 |
渐开线花键轴连接.啮合角30°.模数1.25的基础尺寸和试验尺寸 |
(Involute spline joints; 30?pressure angle; basic dimensions and test dimensions for module 1,25) |
| DIN 5480-5-1991 |
渐开线花键轴连接.啮合角30°.模数1.7和1.75的基础尺寸和试验尺寸 |
(Involute spline joints; 30?pressure angle; basic dimensions and test dimensions for module 1,5 and 1,75) |
| DIN 5480-6-1991 |
渐开线花键轴连接.啮合角30°.模数2的基础尺寸和试验尺寸 |
(Involute spline joints; 30?pressure angle; basic dimensions and test dimensions for module 2) |
| DIN 5480-7-1991 |
渐开线花键轴连接.啮合角30°.模数2.5的基础尺寸和试验尺寸 |
(Involute spline joints; 30?pressure angle; basic dimensions and test dimensions for module 2,5) |
| DIN 5480-8-1991 |
渐开线花键轴连接.啮合角30°.模数3的基础尺寸和试验尺寸 |
(Involute spline joints; 30?pressure angle; basic dimensions and test dimensions for module 3) |
| DIN 5480-9-1991 |
渐开线花键轴连接.啮合角30°.模数4的基础尺寸和试验尺寸 |
(Involute spline joints; 30?pressure angle; basic dimensions and test dimensions for module 4) |
| DIN 54800-1979 |
塑料检验.检验用聚氯乙烯(PVC)糊的制备 |
(Testing of plastics; preparation of polyvinyl chloride (PVC) pastes for testing purposes) |
| DIN 54801-1979 |
塑料检验.用Serers毛细管粘度计测定聚氯乙烯膏在高速度梯度时的表观粘度 |
(Testing of plastics; determination of apparent viscosity at high rates of shear of polyvinyl chloride (PVC) pastes by Severs capillary viscosimeter) |
| DIN 54802-1-1997 |
塑料检验.加热氯乙烯(VC)聚合物时增塑剂吸收量和增塑剂吸收速度的测定.第1部分:行星式搅拌机法 |
(Testing of plastics - Determination of plasticizer sorption and rate of plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part 1: Planetary mixer method) |
| DIN 54802-2-1997 |
塑料检验.加热氯乙烯(VC)聚合物时增塑剂吸收量和增塑剂吸收速度的测定.第2部分:静态法 |
(Testing of plastics - Determination of plasticizer sorption and rate of plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part 2: Statical method) |
| DIN 5481-1-1952 |
锯齿孔和锯齿轴剖面 |
(Internal and External Serrations) |
| DIN 5481-2-1956 |
内外锯齿形花键.锯齿孔量规.量规尺寸 |
(Internal and external serrations (serrations); gauging of serrated hubs, gauge dimensions) |
| DIN 5481-2005 |
锯齿形花键轴 |
|
| DIN 5481-3-1965 |
锯齿孔和锯齿轴剖面.锯齿轴过端量规.量规尺寸 |
(Go-gauging of serrated shafts; gauge dimensions) |
| DIN 5481-4-1955 |
锯齿孔和锯齿轴剖面.锯齿轴的不过端量规.量规尺寸 |
(Internal and external serrations (serrations); not-go gauging of serrations, gauge dimensions) |
| DIN 5481-5-1955 |
锯齿孔和锯齿轴剖面.DIN5481B1.2-4的说明 |
(Internal and external serrations (serrations); explanations to DIN 5481 sheets 2 to 4) |
| DIN 54811-1984 |
塑料检验.用毛细管流变化测定塑料熔融物的流动特性 |
(Testing of plastics; determining the fluidity of plastics melts by the capillary rheometer) |
| DIN 54812-1987 |
塑料.环氧树脂及其相关的材料.轻可皂化氯的测定 |
(Plastics; epoxide resins and related materials; determination of easily saponifable chlorine) |
| DIN 54813-1994 |
塑料检验.纺织玻璃纤维增强热固塑料地面的检验.弯曲剪切试验中断裂负荷的测定 |
(Testing of plastics; testing of joints of textile glass reinforced polyester resins; determination of the breaking load by the bending shear test) |
| DIN 54815-1-1998 |
装填聚酯树脂成型材料的管道.第1部分:尺寸,材料,标识 |
(Pipes of filled polyester resin moulding materials - Part 1: Dimensions, materials, designation) |
| DIN 54815-2-1998 |
装填聚酯树脂成型材料的管道.第2部分:要求,检验 |
(Pipes of filled polyester resin moulding materials - Part 2: Requirements, testings) |
| DIN 5483-1-1983 |
随时间变化的量.时间相关的术语 |
(Time-dependent quantities; terms for the time-dependency) |
| DIN 5483-2-1982 |
随时间变化的量.公式符号 |
(Time-dependent quantities; letter symbols) |
| DIN 5483-3-1994 |
随时间变化的量.随时间按正弦变化的量的复数表示 |
(Time-dependent quantities - Part 3: Complex representation of sinusoidal time-dependent quantities) |
| DIN 54836-1984 |
可燃材料的检验.点燃温度的测定 |
(Testing of combustible materials; determination of ignition temperature) |
| DIN 54841-3-2000 |
地下电缆和管道用塑料报警装置.第3部分:可检测的表 |
(Plastic warning devices for buried cables and pipelines - Part 3: Detectable table) |
| DIN 54841-5-2000 |
地下电缆和管道用塑料报警装置.第5部分:电缆沟盖 |
(Plastic warning devices for underground cables and pipelines - Part 5: Cable cover) |
| DIN 5485-1986 |
物理量的命名原则.特征词与基础词构词法 |
(Principles of terminology for physical quantities; composition of terms with adjectives and substantives) |
| DIN 5487-1988 |
付里叶.拉普拉斯和Z变换.符号和概念 |
(Fourier-, laplace- and Z-transformation; symbols and concepts) |
| DIN 5489-1990 |
电工技术的方向和符号.电路和磁路用规则.备用线路图 |
(Directions and signs in electrical engineering; rules for electric and magnetic circuits, equivalent circuit diagrams) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com