标准号 |
中文名称 |
英文名称 |
DIN 86284-1997 |
饮用水,灭火水,污水,油和含油混合剂的输送和接受用管接头类型.概要 |
(Types of joints for disposal and refuelling of drinking water, fire fighting water, sewage, oil and oily mixtures - Synopsis) |
DIN 86285-1987 |
油残渣排放用国际统一标准连接法兰 |
(Flanges for internationally unified connections for the disposal of oil residues) |
DIN 86286-1995 |
船上卫生设备.卫生间装备和管件的布置 |
(Sanitary furnishing on ships - Positioning of sanitary objects and fittings) |
DIN 86287-1999 |
船舶和海洋建筑上的管道.带插接套的钢制管和管件.敷设和处理 |
(Pipework on ships and marine structures - Steel pipes and fittings with spigot and socket - Laying and treatment) |
DIN 86288-1989 |
轮船及海洋建筑物上的管道.套接式钢管和钢制异型件.船体用异型件 |
(Pipework on ships and marine structures; socketed steel pipes and fittings; fittings for use in shipbuilding) |
DIN 863-1-1999 |
几何尺寸的检验.千分尺.第1部分:外径千分尺.标准结构.概念.要求.检验 |
(Verification of geometrical parameters - Micrometers - Part 1: Standard design micrometer callipers for external measurement; concepts, requirements, testing) |
DIN 863-2-1999 |
几何尺寸的检验.千分尺.第2部分:内径千分尺.深度千分尺.概念.要求.检验 |
(Verification of geometrical parameters - Micrometers - Part 2: Micrometer callipers heads, Depth micrometer; concepts, requirements, testing) |
DIN 863-3-1999 |
几何参数检验.千分尺.第3部分:特殊类型的外径千分尺.结构特征,要求,检验 |
(Verification of geometrical parameters - Micrometers - Part 3: Special design micrometer callipers for external measurement; characteristics, requirements, testing) |
DIN 863-4-1999 |
几何参数检验.千分尺.第4部分:内径千分尺.概念,要求,检验 |
(Verification of geometrical parameters - Micrometers - Part 4: Internal micrometers; concepts, requirements, testing) |
DIN 8630-1988 |
机床.活动工作台的外圆磨床.验收条件 |
(Machine tools; external cylindrical grinding machines with a movable workpiece table; acceptance conditions) |
DIN 8632-1-1989 |
机床.卧式活动矩形台平面磨床.验收条件 |
(Machine tools; surface grinding machines with horizontal grinding wheel spindle and rectangular reciprocating table; acceptance conditions) |
DIN 8632-3-1976 |
机床.卧式圆形工作台平面磨床.验收条件 |
(Machine Tools; Surface Grinding Machines with Horizontal Grinding Wheel Spindle, with Round Table; Acceptance Conditions) |
DIN 8632-4-1978 |
机床.平面磨床.双立柱平面磨床.导轨磨床.验收条件 |
(Machine Tools; Surface Grinding Machines; Surface Grinding Machines with Two Columns; Grinding-machines for Grinding Slideways; Acceptance Conditions) |
DIN 8633-3-1977 |
机床.立式圆形工作台的平面磨床.验收条件 |
(Machine Tools; Surface Grinding Machines with Vertical Grinding Wheel Spindle and Round Table; Acceptance Conditions) |
DIN 8634-1994 |
机床.无心外圆磨床.验收条件 |
(Machine tools; external cylindrical centreless grinding machines; acceptance conditions) |
DIN 86341-2000 |
船只及造船技术.超轻型松动法兰和焊颈.钢和不锈钢制成的焊颈DN32-DN50(最大到PN25)和DN65-DN125(最大到PN10 |
(Ships and marine technology - Loose flanges and welding necks extra light duty - Welding necks made from steel and stainless steel DN 32 to DN 50, up to PN 25, DN 65 to DN 125, up to PN 10) |
DIN 8635-1971 |
机床验收条件.行程小于等于500mm立式搪磨机 |
(Acceptance Conditions for Machine Tools; Vertical Honing Machines up to 500 mm Length of Stroke) |
DIN 8637-1990 |
机床.小于70mm内圆磨床主轴.验收条件 |
(Machine tools; grinding spindles with cartridge diameters up to 200 mm; acceptance conditions) |
DIN 865-1983 |
刻度钢尺.检验用刻度尺.要求 |
(Graduated steel rules; Rules for verification purposes; Requirements) |
DIN 8650-1985 |
机床.机械式单柱压力机.验收条件 |
(Machine tools; open front mechanical power presses; acceptance conditions) |
DIN 86500-1968 |
船用螺纹连接的截止阀和闸阀等概述 |
(Valves and Gate Valves with Screwed Connections; Survey of Types for Shipbuilding) |
DIN 86501-2002 |
符合DIN3861的与W出口端成24度连接的炮铜制螺纹帽状阀门 |
(Valves, screwed bonnet type of gun metal with 24?connection with port end W according to DIN 3861) |
DIN 8651-1990 |
机床的验收条件.双柱偏心压力机 |
(Machine tools; straight sided power presses; acceptance conditions) |
DIN 86528-1996 |
螺盖阀的锁紧垫板 |
(Tab washers for screwed bonnet valves) |
DIN 86552-2002 |
符合DIN3861的与W出口端成24度连接的钢制螺纹帽状阀门 |
(Valves, screwed bonnet type of steel with 24?connection with port end W according to DIN 3861) |
DIN 8658-1-1979 |
机床.机械分度头.验收条件 |
(Machine Tools; Mechanical Dividing Heads; Acceptance Conditions) |
DIN 8659-1-1980 |
机床.机床的润滑.润滑指南 |
(Machine tools; lubrication of machine tools, lubrication instructions) |
DIN 8659-2-1980 |
机床.机床的润滑.切削加工机床润滑剂的选择 |
(Machine tools; lubrication of machine tools, selection of lubricants for machine tools operating by removing metal) |
DIN 866-1983 |
刻度钢尺.工作用刻度尺.结构.要求 |
(Graduated steel rules; Engineers` rules; Design, requirements) |
DIN 8660-1-1981 |
机床.刨床.单立柱刨床.验收条件 |
(Machine tools; Planing machines; Single-column planing machines; Acceptance conditions) |
DIN 8660-2-1981 |
机床.刨床.双立柱刨床.验收条件 |
(Machine tools; Planing machines; Two-column planing machines; Acceptance conditions) |
DIN 8665-1983 |
机床.立式外拉床.验收条件 |
(Machine tools; vertical surface type broaching machines; acceptance conditions) |
DIN 8666-1983 |
机床.卧式外拉床.验收条件 |
(Machine tools; horizontal external type broaching machines; acceptance conditions) |
DIN 8667-1983 |
机床.立式内拉床.验收条件 |
(Machine tools; vertical internal type broaching machines; acceptance conditions) |
DIN 8668-1983 |
机床.卧式内拉床.验收条件 |
(Machine tools; horizontal internal broaching machines; acceptance conditions) |
DIN 867-1986 |
通用机械和重型机械的圆柱齿轮渐开线齿条原始齿形 |
(Basic rack tooth profiles for involute teeth of cylindrical gears for general engineering and heavy engineering) |
DIN 86720-2002 |
带螺纹连接阀帽和法兰DN20至DN100,PN16的炮铜钢制作楔形滑阀 |
(Gate valves flat sided of gun metall with screwed bonnet and flanges, DN 20 to DN 100, PN 16) |
DIN 868-1976 |
齿轮.齿轮副和齿轮传动机构的一般概念和规定值 |
(General Definitions and Specification Factors for Gears, Gear Pairs and Gear Trains) |
DIN 87101-1975 |
垂直型.公称宽度50-150.公称压力1.自闭式止回阀.符合公称压力的法兰连接 |
(Non-return flaps (storm valves), self-closing, vertical type, nominal diameter 50 up to 150, nominal pressure 1; mating dimensions for flanges according to nominal pressure 10) |
DIN 87102-1975 |
DIN87101止回阀的外壳 |
(Casings for Non-return Flaps in accordance with DIN 87101) |
DIN 87103-1975 |
DIN87101止回阀的罩盖 |
(Covers for Non-return Flaps in accordance with DIN 87101) |
DIN 87104-1975 |
DIN87101止回阀用阀插入件 |
(Flap Inserts for Non-return Flaps in accordance with DIN 87101) |
DIN 87105-1975 |
DIN87101止回阀用带凸肩的闭锁螺钉 |
(Screw Plugs with Cylindrical Extension for Non-return Flaps in accordance with DIN 87101) |
DIN 87106-1975 |
DIN87101止回阀用定位装置 |
(Locking Devices for Non-return Flaps in accordance with DIN 87101) |
DIN 87107-1975 |
DIN87101止回阀用扁垫圈 |
(Gaskets for Non-return Flaps in accordance with DIN 87101) |
DIN 87151-1-1954 |
过滤器.灰铸铁粗滤器.公称内径40至200.公称压力2.5.带公称压力10的法兰盘连接尺寸.装配图与连接尺寸 |
(Filters; grey cast-iron coarse filters, rated width 40 up to 200, rated pressure 2.5, with flange fitting dimensions according to rated pressure 10, compilation and fitting dimensions) |
DIN 87151-2-1954 |
过滤器.灰铸铁粗滤器.公称内径40至200.公称压力2.5.带公称压力10的法兰盘连接尺寸.零件表 |
(Filters; grey cast-iron coarse filters, rated width 40 up to 200, rated pressure 2.5, with flange fitting dimensions according to rated pressure 10, inventories) |
DIN 87152-1-1954 |
灰铸铁粗滤器.直通式滤器壳 |
(Grey cast-iron coarse filters; enclosures, passage form) |
DIN 87152-2-1954 |
灰铸铁粗滤器.角式滤器壳 |
(Grey cast-iron coarse filters; enclosures, corner form) |
DIN 87153-1954 |
灰铸铁粗滤器.盖 |
(Grey cast-iron coarse filters; lids) |
DIN 87154-1954 |
灰铸铁粗滤器.筛篮 |
(Grey cast-iron coarse filters; strainer baskets) |
DIN 87155-1954 |
灰铸铁粗滤器.密封环 |
(Grey cast-iron coarse filters; sealing rings) |
DIN 87160-1-1992 |
金属制吸滤器.DN20至DN200.组件 |
(Metall stainers, DN 20 to 200; assembly) |
DIN 87160-2-1992 |
金属制吸滤器.DN20至DN200.零件 |
(Metal strainers, DN 20 to 200; components) |
DIN 87223-1997 |
带存水弯的不可关闭的排水口 |
(Scupper with water trap, non shut-off type) |
DIN 87224-1997 |
带存水弯的可关闭的排水口 |
(Scupper with water trap, shut-off type) |
DIN 87225-1997 |
露天甲板用排水口 |
(Scuppers for free decks) |
DIN 87226-1997 |
排水口.露天甲板用侧边排水口 |
(Scupper - Side cuppers for free decks) |
DIN 8730-1968 |
印刷机.概念 |
(Printing machines, terms) |
DIN 87303-2000 |
船上阀用带有锥形和平行面的直角器 |
(Squares with tapered and parallel sides for valves for shipboard use) |
DIN 87308-1999 |
造船业中管件上用的操作部件.渐缩形侧面带四方孔的手摇柄 |
(Operating devices for valves for shipboard use - Crank handles with square hole with tapered sides) |
DIN 8731-1968 |
滚转凹印机的成型滚筒.主要尺寸 |
(Grooved rolls for photogravure rotary machines, main dimensions) |
DIN 87310-1978 |
带内四方和平端的多用扳手螺钉用扳手的开口.一览表 |
(Multi-purpose keys with inner square and flat ends) |
DIN 87311-1976 |
手轮扳手 |
(Handwheel wrenches) |
DIN 87312-1976 |
注入和测深管用螺纹盖帽的平端扳手 |
(Flat-ended keys for deck screw caps for filling and sounding pipes) |
DIN 87314-1987 |
泄水口螺旋接头用内四方扳手 |
(Male square wrenches for drain screws) |
DIN 87340-1980 |
手动发射管的遥控装置.公称尺寸和构件一览表 |
(Remote control gear with transmission tubing for manual operating; nominal sizes, survey of component parts) |
DIN 87341-1980 |
拉杆管的遥控装置.安装 |
(Remote control gear with transmission tubing for manual operation; installation) |
DIN 87343-1976 |
拉杆管的遥控装置.焊入接头 |
(Remote control gear with transmission tubing for manual operation; fork links for welding-in connection) |
DIN 87344-1976 |
拉杆管的遥控装置.插接接头 |
(Remote control gear with transmission tubing for manual operation; fork links with square hole for setting-up connection) |
DIN 87346-1976 |
拉杆管的遥控装置.轴承 |
(Remote control gear with transmission tubing for manual operation; bearings) |
DIN 87349-1976 |
拉杆管的遥控装置.伞齿轮传动 |
(Remote control gear with transmission tubing for manual operation; bevel gear units) |
DIN 87350-1976 |
拉杆管的遥控装置.可回转的角转动 |
(Remote control gear with transmission tubing for manual operation; crown gear units, slewable) |
DIN 87351-1976 |
拉杆管的遥控装置.延伸接轴.套管接头.方形焊入接头 |
(Remote control gear with transmission tubing for manual operation; lengthenings for spindles of armatures) |
DIN 87352-1978 |
拉杆管的遥控装置.可回转曲拐传动的防护罩 |
(Remote control gear with transmission tubing for manual operation; protecting hoods for crown gear units, slewable) |
DIN 87371-1976 |
拉杆管的遥控装置.拉杆管支架 |
(Remote control gear with transmission tubing for manual operation; holder for transmission tubing) |
DIN 87373-1976 |
拉杆管的遥控装置.绝缘套管.水密封 |
(Remote control gear with transmission tubing for manual operation; leading-through bearings, watertight) |
DIN 87374-1976 |
拉杆管的遥控装置.带轴的方形轴颈盖板上的焊接控制台 |
(Remote control gear with transmission tubing for manual operation; deck operating devices, welding-in type) |
DIN 87375-1976 |
拉杆管的遥控装置.带可回转曲拐传动盖板上的焊接 |
(Remote control gear with transmission tubing for manual operation; deck operating devices with slewable crown gear unit, welding-in type) |
DIN 87378-1980 |
拉杆管的遥控装置.示意图 |
(Remote control gear with transmission tubing for manual operation; symbols for schematic drawings) |
DIN 87379-1980 |
拉杆管的遥控装置.交货技术条件.设计细则 |
(Remote control gear with transmission tubing for manual operation; technical delivery specifications, details for construction) |
DIN 8738-1990 |
印刷机和纸加工机.安全设备起动报警信号装置 |
(Printing and paper converting machinery; protection and safety devices; acoustic machine start danger-signal) |
DIN 87380-1980 |
手动发射管的遥控装置.带方孔的可脱开套装叉形连接杆 |
(Remote control gear with transmission tubing for manual operation; fork links for uncoupling with square hole for setting-up connection) |
DIN 87381-1980 |
手动发射管的遥控装置.带直四方孔的电枢的加长转轴 |
(Remote control gear with transmission tubing for manual operation; lengthenings for spindles of armatures with straight square) |
DIN 87382-1980 |
手动发射管的遥控装置.带可旋转冠齿轮的防水的前槽形轴承 |
(Remote control gear with transmission tubing for manual operation; leading-trough bearings with crown gear units slewable, watertight) |
DIN 87383-1980 |
手动发射管的遥控装置.中间控制设备 |
(Remote control gear with transmission tubing for manual operation; intermediate operation device) |
DIN 87384-1980 |
手动发射管的遥控装置.带指示器的铰接式控制设备 |
(Remote control gear with transmission tubing for manual operation; operating devices, hinged with indicator) |
DIN 874-1-1973 |
直尺.划线钢尺.尺寸.交货技术条件 |
(Steel Straight Edges; Dimensions, Technical Conditions of Delivery) |
DIN 874-2-1973 |
直尺.精密直尺.尺寸.交货技术条件 |
(Knife Edge Straight Edges; Dimensions, Technical Conditions of Delivery) |
DIN 8743-1987 |
包装机和包装线的概念.时间概念.生产量及其证明 |
(Terms used in connection with packaging; machines and packaging lines: definitions of time, output and its verification) |
DIN 8743-2004 |
包装机械和包装线.时间术语、参数和计算基础 |
|
DIN 875-1-2005 |
产品几何量技术规范(GPS).90?角尺.第1部分:90?钢角尺 |
|
DIN 875-1-2005 |
产品几何量技术规范(GPS).90?角尺.第1部分:90?钢角尺 |
|
DIN 875-1981 |
90度钢角尺 |
(90 steel squares) |
DIN 876-1-1984 |
平板.天然硬石平板.要求.检验 |
(Surface plates; natural hard rock surface plates; requirements and testing) |
DIN 876-2-1984 |
平板.铸铁平板.要求.检验 |
(Surface plates; cast iron surface plates, requirements and testing) |
DIN 8766-1994 |
面包烤炉.废气损耗极限值 |
(Limits for wastegas heat losses of baking ovens) |
DIN 877-1986 |
倾斜测量仪(水平仪) |
(Inclination measuring instruments (levels)) |
DIN 87721-1-1995 |
排水旋塞.第1部分:总成和装配 |
(Drain screws - Part 1: Assembly, installation) |
DIN 87721-2-1995 |
排水栓塞.第2部分:栓塞.焊接板 |
(Drain screws - Part 2: Screws, welding plates) |
DIN 8777-1996 |
啤酒厂酿造房设备.简要说明 |
(Brewhouse plants - Minimum specifications) |
DIN 878-1983 |
百分表 |
(Dial gauges) |
DIN 8782-1984 |
饮料灌装技术.灌装厂及其组合单的概念 |
(Beverage packaging technology; terminology associated with filling plants and their constituent machines) |
DIN 8783-1986 |
饮料灌装技术.灌装技术设备的检查 |
(Beverage filling technology; tests an filling plants) |
DIN 8784-1993 |
饮料灌装技术.与次序有关的最低规范 |
(Beverage filling and packaging technology; minimum and order related machine specification) |
DIN 879-1-1999 |
几何尺寸的检验.千分表.第1部分:带有机械指示 |
(Verification of geometrical parameters - Dial indicator for linear mesurement - Part 1: With mechanical indication) |
DIN 879-3-1999 |
几何参数校验.线性测量用刻度盘.第3部分:用机械指示和电子限定触点 |
(Verification of geometrical parameters - Dial indicator for linear measurement - Part 3: With mechanical indication and electrical limit contacts) |
DIN 87901-2001 |
泵用双向安全阀 |
(Sniffle valves for pumps) |
DIN 87903-1-1998 |
造船和海洋技术.防火,救护和撤离路线用安全图.第1部分:内容,类型,设计 |
(Ships and marine technology - Safety plans for fire fighting, life-saving appliances and means of escape - Part 1: Contents, types, design) |
DIN 87903-2-1998 |
造船和海洋技术.防火,救护和撤离路线用安全图.第2部分:示图说明和符号 |
(Ships and marine technology - Safety plans for fire fighting, life-saving appliances and means of escape - Part 2: Graphical representation and symbols) |
DIN 87903-3-1998 |
船舶 |
(Ships and marine technology - Safety plans for fire fighting, life-saving appliances and escape routes - Part 3: Signs and plates) |
DIN 8800-1971 |
木材加工机械.技术分级 |
(Woodworking machines, classification) |
DIN 8801-1975 |
木材加工机械.立式锯床名词术语.尺寸 |
(Woodworking machines; vertical frame sawing machines, terms and sizes) |
DIN 8802-1977 |
木材加工机械.立式锯床框架.主要尺寸 |
(Woodworking machines; frames for vertical sawing machines, sizes) |
DIN 8806-1-1975 |
木工用窄带锯片.尺寸 |
(Narrow band saw blades for woodworking; dimensions) |
DIN 8807-1-1979 |
木材加工机械.手动链锯床.概念 |
(Woodworking machines; portable chain saws, terms) |
DIN 8807-2-1979 |
木材加工机械.手动链锯床.电动机有效功率及损耗的测定 |
(Woodworking machines; portable chain saws; specification for engine performance and consumption) |
DIN 8809-1975 |
木工用工具钢圆盘锯片 |
(Circular Saw Blades of Tool Steel for Woodworking) |
DIN 8810-1975 |
木材加工机械.卧式锯床.名称.尺寸 |
(Woodworking machines; horizontal frame sawing machines, terms and sizes) |
DIN 8816-1-1979 |
木材加工机械.带螺纹的刀夹.心轴终端 |
(Threaded tool adaptors for wood working machines; tool shanks) |