标准号 |
中文名称 |
英文名称 |
DIN EN 13480-3/A1-2005 |
金属工业用管道.第3部分:设计和计算 |
|
DIN EN 13480-4-2002 |
金属工业管道.第4部分;生产和安装 |
(Metallic industrial piping - Part 4: Fabrication and installation; German version EN 13480-4:2002) |
DIN EN 13480-5-2002 |
金属工业管道.第5部分;检验和测试 |
(Metallic industrial piping - Part 5: Inspection and testing; German version EN 13480-5:2002) |
DIN EN 13480-6-2004 |
金属工业管道.第6部分:埋管的额外要求 |
|
DIN EN 13481-1-2003 |
铁路设施.轨道.紧固系统的性能要求.第1部分:定义 |
(Railway applications - Track; Performance requirements for fastening systems - Part 1: Definitions; German version EN 13481-1:2002) |
DIN EN 13481-2-2003 |
铁路设施.轨道.紧固系统的性能要求.第2部分:混凝土轨枕的紧固系统 |
(Railway applications - Track; Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers; German version EN 13481-2:2002) |
DIN EN 13481-3-2003 |
铁路设施.轨道:紧固系统的性能要求.第3部分:木质轨枕的紧固系统 |
(Railway applications - Track; Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers; German version EN 13481-3:2002) |
DIN EN 13481-4-2003 |
铁路设施.轨道.紧固系统的性能要求.第4部分:钢轨枕的紧固系统 |
(Railway applications - Track; Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers; German version EN 13481-4:2002) |
DIN EN 13481-5-2003 |
铁路设施.轨道.紧固系统的性能要求.第5部分:厚板轨道的紧固系统 |
(Railway applications - Track; Performance requirements for fastening systems - Part 5: Fastening systems for slab track; German version EN 13481-5:2002) |
DIN EN 13481-7-2003 |
铁路设施.轨道.紧固系统的性能要求.第7部分:尖轨、岔道和护轨用特殊紧固系统 |
(Railways applications - Track; Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails; German version EN 13481-7:2003) |
DIN EN 13482-2002 |
沥青用橡胶软管及软管组件.规范 |
(Rubber hoses and hose assemblies for asphalt and bitumen - Specification; German version EN 13482:2001) |
DIN EN 13484-2002 |
雪橇使用者的头盔 |
(Helmets for users of luges; German version EN 13484:2001) |
DIN EN 13485-2002 |
冷冻、深冻/速冻食品和冰淇淋运输、储存和配送的空气和产品温度测量用温度计.试验、性能、适合性 |
(Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Test, performance, suitability; German version EN 13485:2001) |
DIN EN 13486-2002 |
冷冻、深冻/速冻食品和冰淇淋的运输、储存和配送用温度计记录仪和温度计.定期验证 |
(Thermometer recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Periodic verification; German version EN 13486:2001) |
DIN EN 13487-2004 |
热交换器.强制对流空气冷却制冷剂凝结器和干式冷却机.声音测量 |
|
DIN EN 13488-2003 |
木地板.镶嵌地板构件 |
(Wood flooring - Mosaic parquet elements; German version EN 13488:2002) |
DIN EN 13489-2003 |
木地板.多层拼花地板构件 |
(Wood flooring - Multi-layer parquet elements; German version EN 13489:2002) |
DIN EN 1349 Berichtigung 1-2002 |
对DINEN1349:2000-12的勘误 |
(Corrigenda to DIN EN 1349:2000-12; German version EN 1349:2000/AC:2001) |
DIN EN 1349-2000 |
工业过程控制阀门 |
(Industrial process control valves; German version EN 1349:2000) |
DIN EN 13490-2002 |
机械振动.工业货车.驾驶员座椅振动的实验室评价和规范 |
(Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration; German version EN 13490:2001) |
DIN EN 13491-2004 |
土工合成阻挡层.隧道和地下结构建造中用作液体阻挡层所要求的特性 |
|
DIN EN 13492-2004 |
土工合成阻挡层.液体废物处理地点、转换站或二次容器建造时要求的特性 |
|
DIN EN 13494-2003 |
建筑设备用热绝缘产品.绝缘材料的基底涂层和粘合剂的张力连接强度测定 |
(Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material; German version EN 13494:2002) |
DIN EN 13495-2003 |
建筑设施用隔热产品.外部隔热复合系统(ETICS)耐拉脱的测定(泡沫块试验) |
(Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test); German version EN 13495:2002) |
DIN EN 13496-2003 |
建筑设备用热绝缘产品.测定玻璃纤维网状物的机械特性 |
(Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes; German version EN 13496:2002) |
DIN EN 13498-2003 |
建筑设施用隔热产品.外部隔热复合系统(ETICS)耐穿透度的测定 |
(Thermal insulation products for building applications - Determination of the resistance to penetration of external thermal insulation composite systems (ETICS); German version EN 13498:2002) |
DIN EN 135-1999 |
呼吸防护器.相同定义的术语表 |
(Respiratory protective devices - list of equivalent terms - German version EN 135:1998) |
DIN EN 135000-1993 |
总规范.行波管放大器 |
(Generic specification: travelling wave amplifier tubes; German version EN 135000:1992) |
DIN EN 135001-1993 |
空白详细规范.功率小于500W的功率行波管放大器 |
(Blank detail specification: C.W. power amplifier travelling wave tubes up to 500 Watts; German version EN 135001:1992) |
DIN EN 13501-1-2002 |
结构产品和建筑部件的燃烧性能分类.第1部分:对燃烧试验燃烧反应的试验数据进行分类 |
(Fire classification of construction products and building elements - Part 1: Classification using test data from fire reaction to fire tests; German version EN 13501-1:2002) |
DIN EN 13502-2003 |
烟囱.泥土/陶瓷烟囱帽的要求和试验方法 |
(Chimneys - Requirements and test methods for clay/ceramic flue terminals; German version EN 13502:2002) |
DIN EN 13503-3-2000 |
眼科植入物.眼内透镜.第3部分:机械性能和试验方法 |
(Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods (ISO 11979-3:1999, modified); German version EN 13503-3:2000) |
DIN EN 13503-5-2001 |
眼科植入物.眼内透镜.第5部分:生物兼容性 |
(Ophthalmic implants - Intraocular lenses - Part 5: Biocompatibility (ISO 11979-5:1999, modified); German version EN 13503-5:2001) |
DIN EN 13503-6-2003 |
眼科植入物.眼内透镜.第5部分:储存寿命和运输稳定性 |
(Ophthalmic implants - Intraocular lenses - Part 6: Shelf-life and transport stability (ISO 11979-6:2002, modified); German version EN 13503-6:2002) |
DIN EN 13503-7-2002 |
眼科植入物.眼内透镜.第7部分:临床检查 |
(Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations (ISO 11979-7:2001, modified); German version EN 13503-7:2001) |
DIN EN 13503-8-2000 |
眼科植入物.眼内透镜.第8部分:基本要求 |
(Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements (ISO 11979-8:1999, modified); German version EN 13503-8:2000) |
DIN EN 13506-2002 |
水质.原子荧光光谱法测定汞 |
(Water quality - Determination of mercury by atomic fluorescence spectrometry; German version EN 13506:2001) |
DIN EN 13507-2001 |
热喷涂.热盆涂用金属部件和件表面的预处理 |
(Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying; German version EN 13507:2001) |
DIN EN 13508-1-2004 |
建筑物外部排水和排污系统的条件.第1部分:一般要求 |
(Condition of drain and sewer systems outside buildings - Part 1: General requirements; German version EN 13508-1:2003) |
DIN EN 13508-1-2004 |
建筑物外部排水和排污系统的条件.第1部分:一般要求 |
|
DIN EN 13508-2-2003 |
建筑物外部排水和排污系统条件.第2部分:目视检验编码系统 |
(Conditions of drain and sewer systems outside buildings - Part 2: Visual inspection coding system; German version EN 13508-2:2003) |
DIN EN 1351-1997 |
蒸气强化加气混凝土的弯曲拉伸强度的测定 |
(Determination of flexural strength of autoclaved aerated concrete; German version EN 1351:1997) |
DIN EN 13510-2000 |
土方机械.倾翻保护结构.实验室试验和性能要求 |
(Earth moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:1994, including Amendment A1:1997, modified); German version EN 13510:2000) |
DIN EN 13511-2002 |
鞋类.鞋帮的试验方法.耐磨损性 |
(Footwear - Test methods for uppers - Resistance to damage on lasting; German version EN 13511:2001) |
DIN EN 13512-2002 |
鞋类.鞋帮和鞋衬的试验方法.抗弯性能 |
(Footwear - Test methods for uppers and lining - Flex resistance; German version EN 13512:2001) |
DIN EN 13513-2002 |
鞋类.鞋帮的试验方法.可塑性 |
(Footwear - Test methods for uppers - Deformability; German version EN 13513:2001) |
DIN EN 13514-2002 |
鞋类.鞋帮的试验方法.抗分层性能 |
(Footwear - Test methods for uppers - Delamination resistance; German version EN 13514:2001) |
DIN EN 13515-2002 |
鞋靴.鞋帮和鞋衬的试验方法.水气渗透性和吸收性. |
(Footwear - Test methods for uppers and lining - Water vapour permeability and absorption; German version EN 13515:2001) |
DIN EN 13516 Berichtigung 1-2002 |
DINEN13516:2002-04(EN13516:2001/AC:2002)的勘误 |
(Corrigenda to DIN EN 13516:2002-04 (EN 13516:2001/AC:2002)) |
DIN EN 13516-2002 |
鞋类.鞋帮、鞋衬和内垫的试验方法.橡胶的色牢度 |
(Footwear - Test methods for uppers, lining and insocks - Colour fastness to rubbing; German version EN 13516:2001) |
DIN EN 13517-2002 |
鞋类.鞋帮、鞋衬和内垫的试验方法.退色 |
(Footwear - Test methods for uppers, lining and insocks - Colour migration; German version EN 13517:2001) |
DIN EN 13518-2002 |
鞋类.鞋帮的试验方法.耐水性 |
(Footwear - Test methods for uppers - Water resistance; German version EN 13518:2001) |
DIN EN 13518-2005 |
鞋靴.鞋帮的试验方法.耐水性 |
|
DIN EN 13519-2002 |
鞋类.鞋帮的试验方法.高温特性 |
(Footwear - Test methods for uppers - High temperature behaviour; German version EN 13519:2001) |
DIN EN 1352-1997 |
高压蒸气加气混凝土和堆放多孔轻质混凝土在压应力下静态弹性模数的测定 |
(Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1352:1996) |
DIN EN 13520-2002 |
鞋类.鞋帮、鞋衬和内垫的试验方法.耐磨性 |
(Footwear - Test methods for uppers, lining and insocks - Abrasion resistance; German version EN 13520:2001) |
DIN EN 13521-2002 |
鞋类.鞋帮、鞋衬和内垫的试验方法.隔热性能 |
(Footwear - Test methods for uppers, lining and insocks - Thermal insulation; German version EN 13521:2001) |
DIN EN 13522-2002 |
鞋类.鞋帮的试验方法.断裂强度和伸长 |
(Footwear - Test methods for uppers - Breaking strength and elongation; German version EN 13522:2001) |
DIN EN 13523-0-2001 |
卷材覆层金属.试验方法.第0部分:一般说明和试验方法列表 |
(Coil coated metals - Test methods - Part 0: General introduction and list of test methods; German version EN 13523-0:2001) |
DIN EN 13523-1-2001 |
卷材覆层金属.试验方法.第1部分:覆层厚度 |
(Coil coated metals - Test methods - Part 1: Coating thickness; German version EN 13523-1:2001) |
DIN EN 13523-10-2001 |
卷材覆层金属.试验方法.第10部分:耐荧光紫外光线和水冷凝 |
(Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV light and water condensation; German version EN 13523-10:2001) |
DIN EN 13523-11-2005 |
卷材覆层金属.试验方法.第10部分:耐溶剂性(摩擦试验) |
|
DIN EN 13523-12-2005 |
卷材覆层金属.试验方法.第12部分:耐划痕 |
|
DIN EN 13523-13-2001 |
卷材覆层金属.试验方法.第13部分:耐热加速老化性能 |
(Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat; German version EN 13523-13:2001) |
DIN EN 13523-14-2001 |
卷材覆层金属.试验方法.第14部分:粉化(Helmen法) |
(Coil coated metals - Test methods - Part 14: Chalking (Helmen method); German version EN 13523-14:2001) |
DIN EN 13523-15-2002 |
卷材覆层金属的试验方法.第15部分:位变异构 |
(Coil coated metals - Test methods - Part 15: Metamerism; German version EN 13523-15:2002) |
DIN EN 13523-16-2005 |
卷材覆层金属.试验方法.第16部分:耐磨性 |
|
DIN EN 13523-17-2005 |
卷材涂覆金属.试验方法.第17部分:可剥离薄膜的粘结性 |
|
DIN EN 13523-18-2002 |
卷材覆层金属的试验方法.第18部分:耐染色性 |
(Coil coated metals - Test methods - Part 18: Resistance to staining; German version EN 13523-18:2002) |
DIN EN 13523-19-2005 |
卷材覆层金属.试验方法.第19部分:大气曝露试验的样板设计和方法 |
|
DIN EN 13523-2-2001 |
卷材覆层金属.试验方法.第2部分:镜面光泽 |
(Coil coated metals - Test methods - Part 2: Specular gloss; German version EN 13523-2:2001) |
DIN EN 13523-20-2005 |
卷材涂覆金属.试验方法.第20部分:泡沫材料粘结性 |
|
DIN EN 13523-23-2002 |
卷材覆层金属的试验方法.第23部分:含二氧化硫的湿气中的颜色稳定性 |
(Coil coated metals - Test methods - Part 23: Colour stability in humid atmospheres containing sulfur dioxide; German version EN 13523-23:2002) |
DIN EN 13523-24-2005 |
卷材覆层金属.试验方法.第24部分:耐粘结性和压力标记 |
|
DIN EN 13523-3-2001 |
卷材覆层金属.试验方法.第3部分:颜色差异.仪器比较 |
(Coil coated metals - Test methods - Part 3: Colour difference; Instrumental comparison; German version EN 13523-3:2001) |
DIN EN 13523-4-2001 |
卷材覆层金属.试验方法.第4部分:铅笔硬度 |
(Coil coated metals - Test methods - Part 4: Pencil hardness; German version EN 13523-4:2001) |
DIN EN 13523-5-2001 |
卷材覆层金属.试验方法.第5部分:快速变形的耐性(冲击试验) |
(Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test); German version EN 13523-5:2001) |
DIN EN 13523-6-2002 |
卷材覆层金属.试验方法.第6部分:压痕后的粘着力.杯突试验 |
(Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test); German version EN 13523-6:2002) |
DIN EN 13523-7-2001 |
卷材覆层金属.试验方法.第7部分:弯曲开裂的耐性(T弯曲试验) |
(Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2001) |
DIN EN 13523-8-2002 |
卷材覆层金属.试验方法.第8部分:耐盐雾性 |
(Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog); German version EN 13523-8:2002) |
DIN EN 13523-9-2001 |
卷材覆层金属.试验方法.第9部分:耐水浸性能 |
(Coil coated metals - Test methods - Part 9: Resistance to water immersion; German version EN 13523-9:2001) |
DIN EN 13526-2002 |
固定源辐射.利用工艺技术测定由溶剂产生的废气中全部气态有机碳的质量浓度.连续火焰离子化检测器法 |
(Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes - Continuous flame ionisation detector method; German version EN 13526:2001) |
DIN EN 13527-2001 |
百页窗和百叶帘.操纵力的测量.试验方法 |
(Shutters and blinds - Measurement of operating force - Test methods; German version EN 13527:1999) |
DIN EN 13528-1-2002 |
环境空气质量.测定气体和蒸气浓度的扩散取样机.要求和试验方法.第1部分:一般要求 |
(Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 1: General requirements; German version EN 13528-1:2002) |
DIN EN 13528-2-2002 |
环境空气质量.测定气体和蒸气浓度的扩散取样机.要求和试验方法.第2部分:特殊要求和试验方法 |
(Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 2: Specific requirements and test methods; German version EN 13528-2:2002) |
DIN EN 13528-3-2004 |
环境空气质量.气体和蒸气浓度测定用扩散取样机.第3部分:选择、使用和维修指南 |
|
DIN EN 1353-1997 |
高压蒸气加气混凝土的湿度测定 |
(Determination of moisture content of autoclaved aerated concrete; German version EN 1353:1996) |
DIN EN 13530-1-2002 |
低温容器.大体积、可运输、真空绝缘容器.第1部分:基本要求 |
(Cryogenic vessels - Large transportable vacuum insulated vessels - Part 1: Fundamental requirements; German version EN 13530-1:2002) |
DIN EN 13530-2-2003 |
低温容器.大体积、可运输、真空绝缘容器.第2部分:设计、装配、检验和试验 |
(Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 13530-2:2002) |
DIN EN 13530-2/A1-2004 |
低温容器.大体积、可运输、真空绝缘容器.第2部分:设计、制作、检查和试验 |
|
DIN EN 13530-3-2002 |
低温容器.大体积、可运输、真空绝缘容器.第3部分:操作要求 |
(Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3: Operational requirements; German version EN 13530-3:2002) |
DIN EN 13530-3-2005 |
低温容器.大型可运输真空绝缘容器.第3部分:操作要求 |
|
DIN EN 13531-2002 |
土方机械.小型掘土机的防倾翻结构(TOPS) |
(Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997, modified); German version EN 13531:2001) |
DIN EN 13535-2001 |
肥料和施用石灰.分类 |
(Fertilizers and liming materials - Classification; German version EN 13535:2001) |
DIN EN 13536-2002 |
填充有羽毛和绒毛的人造物品.服装的要求.轻便服装 |
(Manufactured articles filled with feather and down - Requirements for clothing - Light use; German version EN 13536:2001) |
DIN EN 13537-2002 |
睡袋的要求 |
(Requirements for sleeping bags; German version EN 13537:2002) |
DIN EN 13538-1-2002 |
睡袋尺寸特性的测定.第1部分:内部尺寸 |
(Determination of dimensional characteristics of sleeping bags - Part 1: Internal dimensions; German version EN 13538-1:2002) |
DIN EN 13538-2-2002 |
睡袋尺寸特性的测定.第2部分:厚度和弹性的恢复 |
(Determination of dimensional characteristics of sleeping bags - Part 2: Thickness and elastic recovery; German version EN 13538-2:2002) |
DIN EN 13538-3-2002 |
睡袋的尺寸特性测定.第3部分:有效容积和易包装性 |
(Determination of dimensional characteristics of sleeping bags - Part 3: Volume under load and easiness of packaging; German version EN 13538-3:2002) |
DIN EN 1354-1997 |
堆放多孔轻质混凝土抗压强度测定 |
(Determination of compressive strength of lightweight aggregate concrete with open structure; German version EN 1354:1996) |
DIN EN 1354-2005 |
测定透空式结构轻集料混凝土的抗压强度 |
|
DIN EN 13540-2003 |
皮革.物理和机械试验.漆皮耐热性的测定 |
(Leather - Physical and mechanical tests - Determination of heat resistance of patent leather; German version EN 13540:2002) |
DIN EN 13541-2001 |
建筑物用玻璃.保险玻璃.防爆炸压力的试验和分类 |
(Glass in building - Security glazing - Testing and classification of resistance against explosion pressure; German version EN 13541:2000) |
DIN EN 13542-2002 |
填充有羽毛和绒毛的人造物品.服装压缩指数的测定方法 |
(Manufactured articles filled with feather and down - Method for determining the compressibility index of clothing; German version EN 13542:2001) |
DIN EN 13543-2002 |
填充有羽毛和绒毛的人造物品.填充材料吸水性测量 |
(Manufactured articles filled with feather and down - Measurement of water absorption of filling material; German version EN 13543:2001) |
DIN EN 13544-1 Berichtigung 1-2005 |
对DIN EN 13544-1-2004的勘误 |
|
DIN EN 13544-1-2002 |
呼吸疗法设备.第1部分:雾化系统及其件 |
(Respiratory therapy equipment - Part 1: Nebulizing systems and their components; German version EN 13544-1:2001) |
DIN EN 13544-1-2004 |
呼吸治疗设备.第1部分:雾化系统及其部件 |
|
DIN EN 13544-2-2003 |
呼吸治疗设备.第2部分:管和连接件 |
(Respiratory therapy equipment - Part 2: Tubing and connectors; German version EN 13544-2:2002) |
DIN EN 13544-3-2001 |
呼吸疗法设备.第3部分:气体传输设备 |
(Respiratory therapy equipment - Part 3: Air entrainment devices; German version EN 13544-3:2001) |
DIN EN 13545-2002 |
床垫上部结构.床垫卡套.试验方法和要求 |
(Pallet superstructures - Pallet collars - Test methods and performance requirements; German version EN 13545:2002) |
DIN EN 13546-2002 |
防护服.曲棍球守门员的手、胳膊、胸部、腿、脚和生殖器用防护装置以及曲棍球运动员颈部防护装置.要求和试验 |
(Protective clothing - Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players - Requirements and test methods; German version EN 13546:2002) |
DIN EN 13549-2001 |
清洁服务.质量测量系统的基本要求和推荐方法 |
(Cleaning services - Basic requirements and recommendations for quality measuring systems; German version EN 13549:2001) |
DIN EN 1355-1997 |
高压蒸气加气混凝土和堆放多孔轻质混凝土压应力蠕变变形的测定 |
(Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1355:1996) |
DIN EN 13553-2002 |
弹性地板覆盖物.用于特别潮湿地区的聚氯乙烯地板覆盖物 |
(Resilient floor coverings - Polyvinyl chloride floor coverings for use in special wet areas - Specification; German version EN 13553:2002) |
DIN EN 13554-2002 |
无损检验.声发射.一般原理 |
(Non-destructive testing - Acoustic emission - General principles; German version EN 13554:2002) |
DIN EN 13555-2005 |
法兰及其连接件.带垫圈的圆形法兰连接件用与设计规则有关的垫圈参数和试验规程 |
|
DIN EN 13556-2003 |
圆木和锯材.欧洲木材的命名 |
(Round and sawn timber - Nomenclature of timbers used in Europe; Trilingual version EN 13556:2003) |
DIN EN 13557-2004 |
起重机.控制装置和控制站 |
|
DIN EN 1356-1997 |
横向负载下高压蒸气加气混凝土或堆放多孔轻质混凝土造的预制加强部件的承载性能测定 |
(Performance test for prefabricated reinforced components under transversal load of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1356:1996) |