标准号 |
中文名称 |
英文名称 |
DIN EN 81-1/A2-2005 |
升降机施工和安装的安全规则.第1部分:电动升降机.A2:机械和滑轮间隔 |
|
DIN EN 81-2-2000 |
升降机施工和安装的安全规则.第2部分:液压升降机 |
(Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts (includes corrigendum AC:1999); German version EN 81-2:1998 + AC:1999) |
DIN EN 81-2/A2-2005 |
升降机施工和安装的安全规则.第2部分:液压升降机.A2:机械和滑轮间隔 |
|
DIN EN 81-3-2001 |
升降机施工和安装的安全规则.第3部分:电动升降机和液压升降机 |
(Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts; German version EN 81-3:2000) |
DIN EN 81-70-2005 |
电梯建造和安装的安全规则.客梯及客货两用梯的特殊应用.第70部分:电梯对包括残疾人在内的所有人员的可达性 |
|
DIN EN 81-71-2005 |
电梯建造和安装的安全规则.客梯和客货两用梯的特殊应用.第71部分:耐破坏性电梯 |
|
DIN EN 81-80-2004 |
电梯建造和安装的安全准则.现有电梯.第80部分:提高现有载人电梯和客货两用电梯安全性的规则 |
(Safety rules for the construction and installation of lifts - Existing lifts - Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts; German version EN 81-80:2003) |
DIN EN 81-80-2004 |
电梯建造和安装的安全准则.现有电梯.第80部分:提高现有载人电梯和客货两用电梯安全性的规则 |
|
DIN EN 810-1997 |
带电驱动压缩机的干躁器.功率,标记,功能要求和技术数据单 |
(Dehumidifiers with electrically driven compressors - Rating tests, marking, operational requirements and technical data sheet; German version EN 810:1997) |
DIN EN 811-1996 |
机器的安全性.人体下肢可触及的危险区域的安全距离 |
(Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs; German version EN 811:1996) |
DIN EN 812-2002 |
工业用防撞帽(包括修改件A1) |
(Industrial bump caps (includes Amendment A1:2001); German version EN 812:1997 + A1:2001) |
DIN EN 813-1997 |
防止坠落用的人员防护设备.座位上的安全带 |
(Personal protective equipment for prevention of falls from a height - Sit harnesses; German version EN 813:1997) |
DIN EN 814-1-1997 |
带电驱动压缩机的空调机和热力泵.制冷.第1部分:名称,定义和标识 |
(Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 1: Terms, definitions and designations; German version EN 814-1:1997) |
DIN EN 814-2-1997 |
带电驱动压缩机的空调机和热力泵.制冷.第2部分:符号指示的检验和要求 |
(Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 2: Testing and requirements for marking; German version EN 814-2:1997) |
DIN EN 814-3-1997 |
带电驱动压缩机的空调机和热力泵.制冷.第3部分:要求 |
(Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 3: Requirements; German version EN 814-3:1997) |
DIN EN 815-1996 |
无防护平巷掘进机和插入岩石的无钻杆竖井钻机的安全 |
(Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock; German version EN 815:1996) |
DIN EN 815/A1-2005 |
岩石用无防护隧道钻机和无杆钻井机安全 |
|
DIN EN 816-1997 |
卫生器具附件.自锁附件PN10 |
(Sanitary tapware - Automatic shut-off valves PN 10; German version EN 816:1996) |
DIN EN 817-1997 |
卫生设备管件.机械混合器(PN10).普通技术规范 |
(Sanitary tapware - Mechanical mixers (PN 10) - General technical specifications; German version EN 817:1997) |
DIN EN 81714-2-1999 |
产品技术文件用图形符号的设计.第2部分:包括相关目录图形符号及其交换要求的计算机适用的图形符号规范 |
(Design of graphical symbols for use in the technical documentation of products - Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange (IEC 817 |
DIN EN 81714-3-2001 |
产品技术文件用图形符号的设计.第3部分:连接节点、网络及其编码的分类 |
(Design of graphical symbols for use in the technical documentation of products - Part 3: Classification of connect nodes, networks and their encoding (IEC 81714-3:1998); German version EN 81714-3:2001) |
DIN EN 818-1-1996 |
起重用短链条.安全性.第1部分:一般验收条件 |
(Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance; German version EN 818-1:1996) |
DIN EN 818-2-1996 |
起重用短环圆钢链条.安全性.第2部分:质量等级8止档链用中级公差圆钢链条 |
(Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings, grade 8; German version EN 818-2:1996) |
DIN EN 818-3-1999 |
起重用短环圆钢链条.安全性.第3部分:用作止档链条的中级公差的圆钢链.质量等级4 |
(Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings; grade 4; German version EN 818-3:1999) |
DIN EN 818-4-1996 |
起重用短环圆钢链条.安全性.第4部分:质量等级8止档链 |
(Short link chain for lifting purposes - Safety - Part 4: Chain slings, grade 8; German version EN 818-4:1996) |
DIN EN 818-5-1999 |
起重用短环圆钢链条.安全性.第5部分:止挡环.质量等级4 |
(Short link chain for lifting purposes - Safety - Part 5: Chain slings; grade 4; German version EN 818-5:1999) |
DIN EN 818-6-2000 |
起重用短环圆钢链条.安全性.第6部分:吊式链锁.生产商提供的用于使用和维修的信息规范 |
(Short link chain for lifting purposes - Safety - Part 6: Chain slings; specification for information for use and maintenance to be provided by the manufacturer; German version EN 818-6:2000) |
DIN EN 818-7-2002 |
升降用的短节链条的安全.第7部分:T等级(类型T、DAT和DT)、精密公差吊链 |
(Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, grade T (Types T, DAT and DT); German version EN 818-7:2002) |
DIN EN 820-2-2003 |
高级工业陶瓷.整体陶瓷的试验方法.热机械特性.第1部分:自重变形的测定 |
(Advanced technical ceramics - Methods of test for monolithic ceramics - Thermo-mechanical properties - Part 2: Determination of self-loaded deformation; German version EN 820-2:2003) |
DIN EN 820-3-2004 |
高级工业陶瓷.块体陶瓷的试验方法.热机械特性.第3部分:水淬火法测定耐热冲击性 |
|
DIN EN 82045-1-2002 |
文献管理.第1部分:原理和方法 |
(Document management - Part 1: Principles and methods (IEC 82045-1:2001); German version EN 82045-1:2001) |
DIN EN 82045-2-2005 |
文件管理.第2部分:数据素和信息参考模型 |
|
DIN EN 821-1-1995 |
高技术陶瓷.整体陶磁.单片陶瓷的热物理特性.第1部分:热膨胀的测定 |
(Advanced technical ceramics - Monolithic ceramics - Thermophysical properties - Part 1: Determination of thermal expansion; German version EN 821-1:1995) |
DIN EN 821-2-1997 |
高技术陶瓷.整体陶磁.热物理性能.第2部分:用激光闪光法(或热能脉冲)测量导热能力 |
(Advanced technical ceramics - Monolithic ceramics, thermo-physical properties - Part 2: Determination of thermal diffusity by the laser flash (or heat pulse) method; German version EN 821-2:1997) |
DIN EN 822-1994 |
建筑物用热绝缘产品.长度和宽度测定 |
(Thermal insulating products for building applications - Determination of length and width; German version EN 822:1994) |
DIN EN 823-1994 |
建筑物用热绝缘产品.厚度测定 |
(Thermal insulating products for building applications - Determination of thickness; German version EN 823:1994) |
DIN EN 824-1994 |
建筑物用热绝缘产品.矩形测定 |
(Thermal insulating products for building applications - Determination of squareness; German version EN 824:1994) |
DIN EN 825-1994 |
建筑物用热绝缘产品.平直性测定 |
(Thermal insulating products for building applications - Determination of flatness; German version EN 825:1994) |
DIN EN 826-1996 |
建筑物用热绝缘产品.压力性能测定 |
(Thermal insulating products for building applications - Determination of compression behaviour; German version EN 826:1996) |
DIN EN 827-1995 |
粘合剂.常规固体含量和恒定质量固体含量的测定 |
(Adhesives - Determination of conventional solids content and constant mass solids content; German version EN 827:1994) |
DIN EN 828-1998 |
粘合剂.可湿性.固体表面接触角度和临界表面张力测量法测定 |
(Adhesives - Wettability - Determination by measurement of contact angle and critical surface tension of solid surface; German version EN 828:1997) |
DIN EN 829-1996 |
实验室条件下诊断的系统.医学和生物试样的传送包装.要求.检验 |
(In vitro diagnostic systems - Transport packages for medical and biological specimens - Requirements, test; German version EN 829:1996) |
DIN EN 832-2003 |
建筑物的热性能.供热用能量需求量的计算.住宅建筑 |
(Thermal performance of building - Calculation of energy use for heating - Residential buildings (includes Corrigenda AC:2002); German version EN 832:1998 + AC:2002) |
DIN EN 834-1994 |
室内采暖面积的消耗值推算用热气成本分配器.带供电的装置 |
(Heat cost allocators for the determination of the consumption of room heating radiators - Appliances with electrical energy supply; German version EN 834:1994) |
DIN EN 835-1995 |
测定房间暖气片损耗用的热成本分配器.以蒸发原理为基础的不带电能源的器具 |
(Heat cost allocators for the determination of the consumption of room heating radiators - Appliances without electrical energy supply based on the evaporation principle; German version EN 835:1994) |
DIN EN 836-1997 |
园艺机具.电动草坪割草机.安全性 |
(Garden equipment - Powered lawnmowers - Safety; German version EN 836:1997) |
DIN EN 836/A1-1998 |
园艺设备.电动剪草机.安全性 |
(Garden equipment - Powered lawnmowers - Safety; German version EN 836:1997/A1:1997) |
DIN EN 836/A2-2001 |
园艺机具.电动剪草机.安全.修改件A2 |
(Garden equipment - Powered lawnmowers - Safety; Amendment A2; German version EN 836:1997/A2:2001) |
DIN EN 836/A3-2004 |
园林设备.电动剪草机.安全 |
|
DIN EN 837-1-1997 |
压力测量仪.第1部分:波登压力测量仪.尺寸,测量技术,要求和检验 |
(Pressure gauges - Part 1: Bourdon tube pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-1:1996) |
DIN EN 837-2-1997 |
压力测量仪.第2部分:压力测量仪的选择和安装建议 |
(Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges; German version EN 837-2:1997) |
DIN EN 837-3-1997 |
压力测量仪.第3部分:膜片和膜盒压力测量仪.尺寸,测量技术,要求和检验 |
(Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-3:1996) |
DIN EN 838-1995 |
工作场地的大气构成.煤气和蒸汽测定用扩散收集器.要求.检验.标识 |
(Workplace atmospheres - Diffusive samplers for the determination of gases or vapours - Requirements and test methods; German version EN 838:1995) |
DIN EN 84-1997 |
木材防腐剂.生物试验前已处理木材的加速老化.冲洗极限 |
(Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Leaching procedure; German version EN 84:1997) |
DIN EN 840-1-1997 |
移动式废料收集箱.第1部分:梳齿形提升装置用带两个轮子容积为80至390立升的收集箱.尺寸和外型设计 |
(Mobile waste containers - Part 1: Containers with 2 wheels with a capacity from 80 l to 390 l for comb lifting devices, dimensions and design; German version EN 840-1:1997) |
DIN EN 840-1-2004 |
移动式废料箱.第1部分:梳齿形提升装置用容积最大为400L的两轮箱.尺寸和设计 |
|
DIN EN 840-2-1997 |
移动式废料收集箱.第2部分:耳轴形或/和梳齿形提升装置用带4个轮子容积为500至1200立升的收集箱.尺寸和外型 |
(Mobile waste containers - Part 2: Containers with 4 wheels with a capacity from 500 l to 1200 l with flat lid(s), for trunnion and/or comb lifting devices, dimensions and design; German version EN 840-2:1997) |
DIN EN 840-2-2004 |
移动式废料收集箱.第2部分:枢轴和/或梳齿形提升装置用带平盖的容积为1300L及以下的4轮收集箱.尺寸和设计 |
|
DIN EN 840-3-1997 |
移动式废料收集箱.第3部分:耳轴形或/和梳齿形提升装置用带4个轮子和移动盖板容积为700至1300立升的收集箱. |
(Mobile waste containers - Part 3: Containers with 4 wheels with a capacity from 770 l to 1300 l with dome lid(s), for trunnion and/or comb lifting devices, dimensions and design; German version EN 840-3:1997) |
DIN EN 840-3-2004 |
移动式废料收集箱.第3部分:枢轴和/或梳齿形提升装置用带圆盖的容积为1300L及以下的4轮收集箱.尺寸和设计 |
|
DIN EN 840-4-1997 |
移动式废料收集箱.第4部分:耳轴形或GB形或/和宽式梳齿形提升装置用带4个轮子和移动盖板容积为700至1700立升 |
(Mobile waste containers - Part 4: Containers with 4 wheels with a capacity from 750 l to 1700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices, dimensions and design; German version EN 840-4:1997) |
DIN EN 840-4-2004 |
移动式废料收集箱.第4部分:宽枢轴或BG和/或宽梳齿形提升装置用带平盖的容积为1700L及以下的4轮收集箱.尺寸和设计 |
|
DIN EN 840-5-1997 |
移动式废料收集箱.第5部分:性能要求和检验方法 |
(Mobile waste containers - Part 5: Performance requirements and test methods; German version EN 840-5:1997) |
DIN EN 840-5-2004 |
移动式废料箱.第5部分:性能要求和试验方法 |
|
DIN EN 840-5/A1-2000 |
移动式废料收集箱.第5部分:性能要求和试验方法.修改件1 |
(Mobile waste containers - Part 5: Performance requirements and test methods; Amendment A1; German version EN 840-5:1997/A1:2000) |
DIN EN 840-6-1997 |
移动式废料收集箱.第6部分:安全及卫生要求 |
(Mobile waste containers - Part 6: Safety and health requirements; German version EN 840-6:1997) |
DIN EN 840-6-2004 |
移动式废料箱.第6部分:安全和健康要求 |
|
DIN EN 840-6/A1-2000 |
移动式废料收集箱.第6部分:安全和卫生要求.修改件A1 |
(Mobile waste containers - Part 6: Safety and health requirements; Amendment A1; German version EN 840-6:1997/A1:2000) |
DIN EN 841-1996 |
条形码.符号规范.格式说明 |
(Bar coding - Symbology specifications, format description; German version EN 841:1995) |
DIN EN 842-1996 |
机器的安全性.光学危险信号.一般要求,设计和检验 |
(Safety of machinery - Visual danger signals - General requirements, design and testing; German version EN 842:1996) |
DIN EN 843-1-1995 |
高技术陶瓷.整体陶磁.室温下单片陶瓷的机械特性.第1部分:抗弯强度的测定 |
(Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 1: Determination of flexural strength; German version EN 843-1:1995) |
DIN EN 844-1-1995 |
圆木和锯木.术语.第1部分:圆木和锯材通用一般术语 |
(Round and sawn timber - Terminology - Part 1: General terms common to round timber and sawn timber; German version EN 844-1:1995) |
DIN EN 844-10-1998 |
圆木和锯木.术语.第10部分:变色和真菌浸染的概念 |
(Round and sawn timber - Terminology - Part 10: Terms relating to stain and fungal attack; Trilingual version EN 844-10:1998) |
DIN EN 844-11-1998 |
圆木和锯木.术语.第11部分:和病虫害相关的概念 |
(Round and sawn timber - Terminology - Part 11: Terms relating to degrade by insects; Trilingual version EN 844-11:1998) |
DIN EN 844-12-2001 |
圆木和锯材.术语.第12部分:附加术语和通用索引 |
(Round and sawn timber - Terminology - Part 12: Additional terms and general index; German version EN 844-12:2000) |
DIN EN 844-2-1997 |
园木和锯木.术语.第2部分:园木的一般概念 |
(Round and sawn timber - Terminology - Part 2: General terms relating to round timber; German version EN 844-2:1997) |
DIN EN 844-3-1995 |
圆木和锯木.术语.第3部分:锯木的一般术语 |
(Round and sawn timber - Terminology - Part 3: General terms relating to sawn timber; German version EN 844-3:1995) |
DIN EN 844-4-1997 |
园木和锯木.术语.第2部分:湿度的概念 |
(Round and sawn timber - Terminology - Part 4: Terms relating to moisture content; German version EN 844-4:1997) |
DIN EN 844-5-1997 |
园木和锯木.术语.第5部分:园木尺寸的概念 |
(Round and sawn timber - Terminology - Part 5: Terms relating to dimensions of round timber; German version EN 844-5:1997) |
DIN EN 844-6-1997 |
圆木和锯木.术语.第6部分:锯木尺寸的概念 |
(Round and sawn timber - Terminology - Part 6: Terms relating to dimensions of sawn timber; German version EN 844-6:1997) |
DIN EN 844-7-1997 |
圆木和锯木.术语.第7部分:有关木材组织结构的术语 |
(Round and sawn timber - Terminology - Part 7: Terms relating to anatomical structure of timber; German version EN 844-7:1997) |
DIN EN 844-8-1997 |
圆木和锯木.术语.第8部分:圆木特性的概念 |
(Round and sawn timber - Terminology - Part 8: Terms relating to features of round timber; German version EN 844-8:1997) |
DIN EN 844-9-1997 |
圆木和锯木.术语.第9部分:锯木特性的概念 |
(Round and sawn timber - Terminology - Part 9: Terms relating to features of sawn timber; German version EN 844-9:1997) |
DIN EN 845-1-2003 |
砌体工程附属件规范.第1部分:砌体连系杆、抗拉带条、吊勾和托架 |
(Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets; German version EN 845-1:2003) |
DIN EN 845-2-2003 |
砌体工程用附属件规范.第2部分:过梁 |
(Specification for ancillary components for masonry - Part 2: Lintels; German version EN 845-2:2003) |
DIN EN 845-3-2003 |
砌体附属件规范.第3部分:钢筋网底层接缝加筋 |
(Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork; German version EN 845-3:2003) |
DIN EN 846-10-2000 |
砖石工程用辅助部件的试验方法.第10部分:测定托架的载荷能力和加载变形特性 |
(Methods of test for ancillary components for masonry - Part 10: Determination of load capacity and load deflection characteristics of brackets; German version EN 846-10:2000) |
DIN EN 846-11-2000 |
砖石工程用辅助部件的试验方法.第11部分:测定门窗过梁的尺寸和弯曲度 |
(Methods of test for ancillary components for masonry - Part 11: Determination of dimensions and bow of lintels; German version EN 846-11:2000) |
DIN EN 846-13-2001 |
砖石工程用辅助部件的试验方法.第13部分:有机覆层的耐冲击、抗磨损和耐腐蚀性测定 |
(Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings; German version EN 846-13:2001) |
DIN EN 846-2-2000 |
砖石工程用辅助部件的试验方法.第2部分:测定灰缝中预制底层接缝加筋的结合强度 |
(Methods of tests for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints; German version EN 846-2:2000) |
DIN EN 846-3-2000 |
砖石工程用辅助部件的试验方法.第3部分:测定预制底层接缝加筋中焊接的抗剪载荷能力 |
(Methods of tests for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement; German version EN 846-3:2000) |
DIN EN 846-4-2002 |
砖石工程用辅助部件的试验方法.第4部分:测定托架的载荷能力和加载变形特性.德文版EN846-4:2001 |
(Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps; German version EN 846-4:2001) |
DIN EN 846-4-2005 |
圬工辅助部件的试验方法.第4部分:固定夹板的负载容量和加载变形特性的测定 |
|
DIN EN 846-5-2000 |
砖石工程用辅助部件的试验方法.第5部分:测定墙拉杆的抗拉荷载和抗压荷载能力及荷载位移特性(粗细相间沉积 |
(Methods of tests for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test); German version EN 846-5:2000) |
DIN EN 846-6-2000 |
砖石工程用辅助部件的试验方法.第6部分:测定墙拉杆的抗拉荷载和抗压荷载能力及荷载位移特性(单端试验) |
(Methods of tests for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test); German version EN 846-6:2000) |
DIN EN 846-7-2000 |
砖石工程用辅助部件的试验方法.第7部分:测定剪应拉杆和滑动拉杆的抗剪载荷能力及荷载位移特性(灰缝连接的 |
(Methods of tests for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couple test for mortar joint connections); German version EN 846-7:2000) |
DIN EN 846-8-2000 |
砖石工程用辅助部件的试验方法.第8部分:测定搁栅吊钩的载荷能力和加载变形特性 |
(Methods of tests for ancillary components for masonry - Part 8: Determination of load capacity and load-deflection characteristics of joist hangers; German version EN 846-8:2000) |
DIN EN 846-9-2000 |
砖石工程用辅助部件的试验方法.第9部分:测定门窗过梁的抗弯曲性和抗剪切性 |
(Methods of tests for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels; German version EN 846-9:2000) |
DIN EN 847-1-1997 |
木材加工用机床刀具.安全性要求.第1部分:铣刀和刨刀.圆盘锯片 |
(Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades; German version EN 847-1:1997) |
DIN EN 847-1-2005 |
木工工具.安全要求.第1部分:铣刀和圆盘锯片 |
|
DIN EN 847-2-2003 |
木工加工用刀具.安全要求.第2部分:安装在铣刀上的刀柄的要求 |
(Tools for woodworking - Safety requirements - Part 2: Requirements for the shank of shank mounted milling tools; German version EN 847-2:2001 + AC:2003) |
DIN EN 847-3-2004 |
木工工具.安全性要求.第3部分:箝位设备 |
|
DIN EN 848-1-1998 |
木材加工机械的安全性.用旋转工具单面加工的铣床.第1部分:单轴垂直台式铣床 |
(Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines; German version EN 848-1:1998) |
DIN EN 848-1/A1-2001 |
木材加工机械的安全性.用旋转工具单面加工的模压机械.第1部分:单轴垂直模压机械.修改件A1 |
(Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines; Amendment A1; German version EN 848-1:1998/A1:2000) |
DIN EN 848-2-1998 |
木材加工机械的安全性.用旋转工具单面加工的铣床.第2部分:带手动进给/机动进给的单轴顶面铣床 |
(Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle handfed/integrated fed routing machines; German version EN 848-2:1998) |
DIN EN 848-3-1999 |
木材加工机械的安全性.用旋转工具单面加工的铣床.第3部分:数控(NC)镗床和手动靠模铣床 |
(Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerical control (NC) boring machines and routing machines; German version EN 848-3:1999) |
DIN EN 849-2002 |
可运输的气瓶.气瓶阀门.规范和型式试验 |
(Transportable gas cylinders - Cylinder valves - Specification and type testing (includes amendment A1:1999 + A2:2001); German Version EN 849:1996 + A1:1999 + A2:2001) |
DIN EN 850-2001 |
可移动的燃气瓶.医用定位销转位的卡箍式阀出口连接 |
(Transportable gas cylinders - Pin-index, yoke-type valve outlet connections for medical use (includes Amendment A1:2000); German version EN 850:1996 + A1:2000) |
DIN EN 851-1995 |
铝和铝合金.生产厨房器具用圆片坯料和圆片预制材料.规范 |
(Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications; German version EN 851:1995) |
DIN EN 853-1997 |
橡皮软管和软管组件.带金属丝编织层的液压软管.规范 |
(Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification; German version EN 853:1996) |
DIN EN 854-1997 |
橡皮软管和软管组件.带织物编织层的液压软管.规范 |
(Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification; German version EN 854:1996) |
DIN EN 855-1997 |
塑料软管和软管组件.带织物编织层的塑料液压软管.规范 |
(Plastic hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification; German version EN 855:1996) |
DIN EN 856-1997 |
橡皮软管和软管组件.带金属丝螺旋垫层的液压软管.规范 |
(Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification; German version EN 856:1996) |
DIN EN 857-1997 |
橡皮软管和软管组件.带金属丝编织层的紧凑型液压软管.规范 |
(Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification; German version EN 857:1996) |
DIN EN 858-1-2002 |
轻液体(如油和汽油)用分离器装置.第1部分:产品设计、性能和试验、标记和质量控制的原则 |
(Separator systems for light liquids (e.g. oil and petrol) - Part 1: Principles of product design, performance and testing, marking and quality control; German version EN 858-1:2002) |
DIN EN 858-1-2005 |
轻液体(如油和汽油)用分离器装置.第1部分:产品设计、性能和试验、标记和质量控制的原则 |
|
DIN EN 859-1997 |
木材加工机械的安全性.手动进给的精密刨床 |
(Safety of woodworking machines - Hand fed surface planing machines; German version EN 859:1997) |
DIN EN 860-1997 |
木材加工机械的安全性.单面加工用厚度刨床 |
(Safety of woodworking machines - One side thickness planing machines; German version EN 860:1997) |
DIN EN 861-1997 |
木材加工机械的安全性.平面刨床和厚度刨床 |
(Safety of woodworking machines - Surface planing and thicknessing machines; German version EN 861:1997) |
DIN EN 862-2001 |
包装.孩子不能打开的包装.非药物产品的非封闭包装的要求和试验过程.德文版本EN862:2001 |
(Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products; German version EN 862:2001) |