标准号 |
中文名称 |
英文名称 |
DIN EN 403-1993 |
自救用呼吸防护器.火灾时自救用带保护罩的过滤器.要求.检验.标识 |
(Respiratory protective devices for self-rescue; filtering devices with hood for self-rescue from fire; requirements, testing, marking; German version EN 403:1993) |
DIN EN 403-2004 |
自救用呼吸保护器.火灾逃生用带面罩的过滤装置.要求、检验和标记 |
|
DIN EN 4030-2002 |
航空航天系列.钛合金管连接件8°30`.还在使用的三通管闷头 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Tees, bulkhead on run; German version EN 4030:2001) |
DIN EN 4031-2002 |
航空航天系列.钛合金管连接件8°30`.焊接金属箍用螺母 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Nuts for welded ferrule; German version EN 4031:2001) |
DIN EN 4032-2004 |
航空航天系列.钛合金管连接件8°30.止推金属丝 |
|
DIN EN 404-1993 |
自救用呼吸防护器.过滤式自救器.要求.检验.标识 |
(Respiratory protective for self-rescue; filter self-rescuer; requirements, testing, marking; German version EN 404:1993) |
DIN EN 404-2005 |
自救用呼吸保护设备.带口罩组件的一氧化碳过滤式自救器 |
|
DIN EN 4045-2003 |
航空航天系列.热阻合金无缝毛细管.尺寸.0.6mm~2mm直径 |
(Aerospace series - Capillary tubes, seamless, in heat resisting alloys - Diameter 0,6 mm D 2 mm; Dimensions; German and English version EN 4045:2001) |
DIN EN 405-2002 |
呼吸保护设备.防毒气或防毒气与粉尘的带阀过滤半罩式面罩.要求、检验、标记 |
(Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking; German version EN 405:2001) |
DIN EN 4051-2003 |
航空航天系列.钛合金TI-P64001、球形、60度管连接器.油口接头 |
(Aerospace series - Pipe couplings, 60? spherical, in titanium alloy TI-P64001 - Port connection; German and English version EN 4051:2002) |
DIN EN 4058-2003 |
航空航天系列.钛和钛合金焊接用填充金属棒和填充金属丝.尺寸.0.5mm~5.0mm直径 |
(Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0,5 mm D 5,0 mm; Dimensions; German and English version EN 4058:2001) |
DIN EN 4060-2003 |
航空航天系列.热阻合金焊接用填充金属棒和填充金属丝.尺寸.0.5mm~5.0mm直径 |
(Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter 0,5 mm D 5,0 mm; Dimensions; German and English version EN 4060:2001) |
DIN EN 4069-1996 |
航空和航天.钝化耐高温钢制小板手开口度平面六角螺母.等级:600MPa(室温下)/650℃ |
(Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/650 C; German version EN 4069:1996) |
DIN EN 407-1994 |
防热危害的手套(高温和/或火焰) |
(Protective gloves against thermal risks (heat and/or fire); German version EN 407:1994) |
DIN EN 407-2004 |
防热危害的手套(高温和/或火焰) |
|
DIN EN 408-1996 |
木材结构.承重用建筑木材和胶合板.几个物理和机械特性的测定 |
(Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties; German version EN 408:1995) |
DIN EN 408-2004 |
木材结构.结构木材和胶合板.某些物理和机械特性的测定 |
|
DIN EN 409-1993 |
木结构检验方法.榫型紧固件屈服力矩的测定 |
(Timber structures; test methods; determination of the yield moment of dowel type fasteners; nails; German version EN 409:1993) |
DIN EN 4099-2005 |
航空航天系列.铝合金AL-P2219-T6或T62.涂覆薄板材和带材.0.5 mm a 6 mm |
|
DIN EN 410-1998 |
建筑玻璃.镶装玻璃发光特性和数和阳光辐射特性的测定 |
(Glass in building - Determination of luminous and solar characteristics of glazing; German version EN 410:1998) |
DIN EN 41003-1999 |
电信网连接用设备的特殊要求 |
(Particular safety requirements for equipment to be connected to telecommunication networks; German version EN 41003:1998) |
DIN EN 4103-2004 |
航空航天系列.镍基合金NI-B40002.铜焊用填充金属、硼化箔 |
|
DIN EN 4104-2003 |
航空航天系列.NI-B40002型镍合金.铜焊接用填充金属粉或糊状物 |
(Aerospace series - Nickel base alloy NI-B40002 - Filler metal for brazing; Powder or paste; German and English version EN 4102:2001) |
DIN EN 4105-1998 |
航天和航空.镍基合金NI-B40002(NiSi4B2).带形硬焊料 |
(Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Tape; German version EN 4105:1998) |
DIN EN 4113-2003 |
航空航天系列.带橡胶垫圈的钝化耐腐蚀钢环状夹具.尺寸和质量 |
(Aerospace series - Clamps, loop (“P“ type) in corrosion resisting steel, passivated, with rubber cushioning - Dimensions, masses; German and English version EN 4113:2001) |
DIN EN 4114-2003 |
航空航天系列.带橡胶垫圈的铝合金环状夹具.尺寸和质量 |
(Aerospace series - Clamps, loop (“P“ type) in aluminium alloy with rubber cushioning - Dimensions, masses; German and English version EN 4114:2001) |
DIN EN 4115-2003 |
航空航天系列.夹具用橡胶垫.尺寸和质量 |
(Aerospace series - Cushion, rubber, for clamps - Dimensions, masses; German and English version EN 4115:2001) |
DIN EN 413-1-2004 |
圬工混凝土.第1部分:组成、规范和合格标准 |
|
DIN EN 413-2-1995 |
砌砖混凝土.第2部分:检验方法 |
(Masonry cement - Part 2: Test methods; German version EN 413-2:1995) |
DIN EN 414-2000 |
机器的安全性.安全性标准的起草和制定的规程 |
(Safety of machinery - Rules for the drafting and presentation of safety standards; German version EN 414:2000) |
DIN EN 415-1-2000 |
包装机械的安全性.第1部分:包装机械和相关设备的术语和分类 |
(Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment; German version EN 415-1:2000) |
DIN EN 415-2-2000 |
包装机械的安全性.第2部分:预成型硬质容器包装机 |
(Safety of packaging machines - Part 2: Pre-formed rigid container packaging machines; German version EN 415-2:1999) |
DIN EN 415-3-2000 |
包装机械的安全性.第3部分:成型,填充和密封机 |
(Safety of packaging machines - Part 3: Form, fill and seal machines; German version EN 415-3:1999) |
DIN EN 415-4 Berichtigung 1-2003 |
DINEN415-4:1997-08的勘误 |
(Corrigenda to DIN EN 415-4:1997-08 (EN 415-4:1997/AC:2002)) |
DIN EN 415-4-1997 |
包装机械的安全性.第4部分:码垛机和散垛机 |
(Safety of packaging machines - Part 4: Palletisers and depalletisers; German version EN 415-4:1997) |
DIN EN 416-1-1999 |
单一燃烧器燃气式顶置辐射管加热器.第1部分:安全 |
(Single burner gas-fired overhead radiant tube heaters - Part 1: Safety; German version EN 416-1:1999) |
DIN EN 416-1/A1-2001 |
非家用单一燃烧器燃气式顶置辐射管加热器.第1部分:安全 |
(Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety; German version EN 416-1/A1:2000) |
DIN EN 416-1/A2-2002 |
非家用单一燃烧器燃气式顶置辐射管加热器.第1部分:安全.修改件A2 |
(Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety; Amendment A2; German version EN 416-1:1999/A2:2001) |
DIN EN 416-1/A3-2002 |
非家用单一燃烧器燃气式顶置管状辐射加热器.第1部分:安全.修改件A3 |
(Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety; Amendment A3; German version EN 416-1:1999/A3:2002) |
DIN EN 417-1992 |
便携式燃具用带或不带取样阀的液化气用金属单向气瓶.制造、检验、标识 |
(Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances; construction, inspection, testing and marking; german version EN 417:1992) |
DIN EN 4179-2000 |
航空航天系列.无损检验人员的资格和认可 |
(Aerospace series - Qualification and approval of personnel for non-destructive testing; German version EN 4179:2000) |
DIN EN 418-1993 |
机械安全.紧急制动装置功能.设计原则 |
(Safety of machinery; emergency stop equipment, functional aspects; principles for design; german version EN 418:1992) |
DIN EN 4180-2003 |
航空航天系列.流体用钛及钛合金圆管.宽度公差.直径4mm≤D≤40mm.尺寸 |
(Aerospace series - Circular tubes, for fluids in titanium and titanium alloys - Wide tolerances; Diameter 4 mm D 40 mm; Dimensions; German and English version EN 4180:2001) |
DIN EN 4182-2002 |
航空航天系列.钛合金管连接件8°30`.异径三通管 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Tees, reduced; German version EN 4182:2001) |
DIN EN 4183-2002 |
航空航天系列.钛合金管连接件8°30`.焊接端90°弯头 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Elbows 90? welded ends; German version EN 4183:2001) |
DIN EN 4184-2002 |
航空航天系列.钛合金管连接件8°30`.焊接端45°弯头 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Elbows 45? welded ends; German version EN 4184:2001) |
DIN EN 4185-2002 |
航空航天系列.钛合金管连接件8°30`.在使用的三通管长闷头 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Tees, bulkhead on run, long; German version EN 4185:2001) |
DIN EN 4186-2002 |
航空航天系列.钛合金管连接件8°30`.十字形活接头 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Unions, cross; German version EN 4186:2001) |
DIN EN 4189-2002 |
航空航天系列.钛合金8°30`管连接件.三通管长闷头分支 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Tees, bulkhead branch, long; German version EN 4189:2001) |
DIN EN 419-1-2003 |
非家用燃气式顶置辐射加热器.第1部分:安全 |
(Non-domestic gas-fired overhead luminous radiant heaters - Part 1: Safety; German version EN 419-1:1999 + A1:2000 + A2:2001 + A3:2002) |
DIN EN 4190-2002 |
航空航天系列.钛合金管连接件8°30`.在使用的带止推金属丝的异径三通管 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Tees, reduced, with thrust nut on run; German version EN 4190:2001) |
DIN EN 4191-2002 |
航空航天系列.钛合金管连接件8°30`.异径三通管长闷头分支 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Tees, reduced, bulkhead branch, long; German version EN 4191:2001) |
DIN EN 4192-2002 |
航空航天系列.钛合金管连接件8°30`.异径三通管闷头分支 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Tees, reduced, bulkhead branch; German version EN 4192:2001) |
DIN EN 4193-2002 |
航空航天系列.钛合金8°30`管连接件.带有异径延长闷头的三通管 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Tees, reduced, bulkhead on long run; German version EN 4193:2001) |
DIN EN 4194-2002 |
航空航天系列.钛合金8°30`管连接件.带有异径闷头三通管 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Tees, reduced, bulkhead; German version EN 4194:2001) |
DIN EN 420-1994 |
手套的一般要求.德文版EN420-94 |
(General requirements for gloves; German version EN 420:1994) |
DIN EN 4202-2005 |
航空航天系列.铝合金AL-P6082-T651.板材.6 mm a 25 mm |
|
DIN EN 4209-2005 |
航空航天系列.铝合金AL-P2219-T851.板材.6 mm a 50 mm |
|
DIN EN 421-1994 |
防电离幅射和放射性污染的手套 |
(Protective gloves against ionizing radiation and radioactive contamination; German version EN 421:1994) |
DIN EN 4211-2005 |
航空航天系列.铝合金AL-P2024-T42.涂覆板材.6 mm a 25 mm |
|
DIN EN 4212-2005 |
航空航天系列.铝合金AL-P5086-H111.板材.6 mm a 80 mm |
|
DIN EN 4213-2005 |
航空航天系列.铝合金AL-P6061-T651.板材.6 mm a 80 mm |
|
DIN EN 4214-2005 |
航空航天系列.铝合金AL-P7010-T651.板材.6 mm a 20 mm |
|
DIN EN 4215-2005 |
航空航天系列.铝合金AL-P7175-T651.板材.6 mm a 80 mm |
|
DIN EN 422-1995 |
橡胶和塑料机械.安全.空心件生产用鼓风机.设计和结构要求 |
(Rubber and plastics machines; safety - Blow moulding machines intended for the production of hollow articles - Requirements for the design and construction; German version EN 422:1995) |
DIN EN 423-2002 |
弹性地板覆盖物.耐污性测定 |
(Resilient floor coverings - Determination of resistance to staining; German version EN 423:2001) |
DIN EN 4233-2002 |
航空航天系列.钛合金管连接件8°30`.带螺纹的焊接活接头 |
(Aerospace series - Pipe coupling 8?0 in titanium alloy - Unions, welded, threaded; German version EN 4233:2001) |
DIN EN 424-2002 |
弹性地板覆盖物.家具腿模拟移动效应的测定 |
(Resilient floor coverings - Determination of the effect of simulated movement of a furniture leg; German version EN 424:2001) |
DIN EN 425-2002 |
层楼板弹性覆盖物.脚轮椅试验 |
(Resilient and laminate floor coverings - Castor chair test; German version EN 425:2002) |
DIN EN 4258-1998 |
航空和航天.金属材料.标准的一般结构.欧洲标准类型之间的连接及其应用 |
(Aerospace series - Metallic materials - General organization of standardization; links between types of EN standards and their use; German version EN 4258:1998) |
DIN EN 426-1993 |
弹性材料.板材宽度、长度、平面性和平直性测定 |
(Resilient floorcoverings; determination of width, length, flatness and straightness of sheet material; German version EN 426:1993) |
DIN EN 4267-2003 |
航空航天系列.钛和钛合金圆棒.尺寸.6mm~160mm直径 |
(Aerospace series - Round bars in titanium and titanium alloys - Diameter 6 mm D 160 mm; Dimensions; German and English version EN 4267:2001) |
DIN EN 427-1994 |
弹性体铺面.边棱长度,直角和整面平直性测定 |
(Resilient floor coverings - Determination of the side length, squareness and straightness of tiles; German version EN 427:1994) |
DIN EN 428-1993 |
弹性覆地材料.整体厚度测定 |
(Resilient floorcoverings; determination of overall thickness; German version EN 428:1993) |
DIN EN 429-1993 |
弹性覆地材料.厚度测定 |
(Resilient floor coverings; determination of the thickness of layers; German version EN 429:1993) |
DIN EN 430-1994 |
弹性体铺面.单位面积质量测定 |
(Resilient floor coverings - Determination of mass per unit area; German version EN 430:1994) |
DIN EN 431-1994 |
弹性体铺面.抗裂强度测定 |
(Resilient floor coverings - Determination of peel resistance; German version EN 431:1994) |
DIN EN 432-1994 |
弹性体铺面.剪切力测定 |
(Resilient floor coverings - Determination of shear force; German version EN 432:1994) |
DIN EN 4324-2003 |
航空航天系列.铝合金AL-W42201.焊接用填充金属.焊条 |
(Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding; Rod; German and English version EN 4324:2001) |
DIN EN 4325-2002 |
航空航天系列.耐高温合金NI-WH1302(NiCr20Co13Mo4Ti3Al).焊接添加料,线材和棒材 |
(Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3Al) - Filler metal for welding; Wire and rod; German version EN 4325:2001) |
DIN EN 4326-2002 |
航空航天系列.耐高温合金铜-WH4102(CoCr28W20Ni5V1).焊接添加料,线材和棒材 |
(Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding; Wire and rod; German version EN 4326:2001) |
DIN EN 4327-2002 |
航空航天系列.耐高温合金铜CO-WH1401(CoCr26Ni11W8).焊接添加料,线材和棒材 |
(Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding; Wire and rod; German version EN 4327:2001) |
DIN EN 4328-2002 |
航空航天系列.钢FE-WM1601(X18CrWNi13-3-2).焊接添加料,线材和棒材 |
(Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2) - Filler metal for welding; Wire and rod; German version EN 4328:2002) |
DIN EN 4329-2002 |
航空航天系列.耐高温合金NI-WH0001(NiCr20).焊接添加料,线材和棒材 |
(Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding; Wire and rod; German version EN 4329:2001) |
DIN EN 433-1994 |
弹性体铺面.恒定负载后残余压力测定 |
(Resilient floor coverings - Determination of residual indentation after static loading; German version EN 433:1994) |
DIN EN 4330-2002 |
航空航天系列.钢FE-WA4802(X8CrNiMn27-22-2).焊接添加料,线材和棒材 |
(Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding; Wire and rod; German version EN 4330:2002) |
DIN EN 4331-2002 |
航空航天系列.钢FE-WL1804(25CrMnMo4-2-2).焊接添加料,线材和棒材 |
(Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding; Wire and rod; German version EN 4331:2002) |
DIN EN 4332-2002 |
航空航天系列.钢FE-WL1805(8CrMnMo12-4-9).焊接添加料,线材和棒材 |
(Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding; Wire and rod; German version EN 4332:2002) |
DIN EN 4333-2002 |
航空航天系列.钢FE-WA4902(X5CrNiCoMoWMn21-20-20-3-3-2).焊接添加料,线材和棒材 |
(Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding; Wire and rod; German version EN 4333:2002) |
DIN EN 4334-2002 |
航空航天系列.钢FE-WL1806(15CrMnMoV5-4-9-3).焊接添加料,线材和棒材 |
(Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding; Wire and rod; German version EN 4334:2002) |
DIN EN 4335-2002 |
航空航天系列.钢FE-WA2602(X4NiCrTiMoV26-15).焊接添加料,线材和棒材 |
(Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding; Wire and rod; German version EN 4335:2002) |
DIN EN 4336-2002 |
航空航天系列.钢FE-WA3801(X4CrNiMn20-10-2).焊接添加料,线材和棒材 |
(Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding; Wire and rod; German version EN 4336:2002) |
DIN EN 4337-2002 |
航空航天系列.耐高温合金NI-WH8901(NiCr16Ti3Mn2).焊接添加料,线材和棒材 |
(Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn2) - Filler metal for welding; Wire and rod; German version EN 4337:2001) |
DIN EN 4338-2002 |
航空航天系列.耐高温合金NI-WH3902(NiCr25Mo10C).焊接添加料,线材和棒材 |
(Aerospace series - Heat resisting alloy NI-WH3902 (NiCr25Mo10C) - Filler metal for welding; Wire and rod; German version EN 4338:2001) |
DIN EN 4339-2002 |
航空航天系列.耐高温合金CO-WH4002(CoCr29W9).焊接添加料,线材和棒材 |
(Aerospace series - Heat resisting alloy CO-WH4002 (CoCr29W9) - Filler metal for welding; Wire and rod; German version EN 4339:2001) |
DIN EN 434-1994 |
弹形体铺面.热作用后对尺寸稳定性和卷曲的测定 |
(Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat; German version EN 434:1994) |
DIN EN 4340-2002 |
航空航天系列.镁合金MG-W68001.焊接添加料,线材和棒材 |
(Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding; Wire and rod; German version EN 4340:2002) |
DIN EN 4341-2002 |
航空航天系列.铝合金AL-W46431.焊接添加料,线材和棒材 |
(Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding; Wire and rod; German version EN 4341:2001) |
DIN EN 4342-2002 |
航空航天系列.钛合金TI-W99001.焊接添加料,线材和棒材 |
(Aerospace series - Titanium TI-W99001 - Filler metal for welding; Wire and rod; German version EN 4342:2001) |
DIN EN 4343-2002 |
航空航天系列.钢FE-WM1001(X13Cr12).焊接添加料,线材和棒材 |
(Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding; Wire and rod; German version EN 4343:2002) |
DIN EN 4344-2002 |
航空航天系列.钢FE-WM10022(X13Cr13).焊接添加料,线材和棒材 |
(Aerospace series - Steel FE-WM10022 (X13Cr13) - Filler metal for welding; Wire and rod; German version EN 4344:2001) |
DIN EN 435-1994 |
弹性体铺面.挠性测定 |
(Resilient floor coverings - Determination of flexibility; German version EN 435:1994) |
DIN EN 436-1994 |
弹性体铺面.密度测定 |
(Resilient floor coverings - Determination of density; German version EN 436:1994) |
DIN EN 437-2003 |
试验气体.试验压力.仪器种类 |
(Test gases - Test pressures - Appliances categories; German version EN 437:2003) |
DIN EN 438-1-1992 |
装饰用高压层压板(HPL).热固性树脂为基质的板材.第1部分:规范 |
(Decorative high-pressure laminates (HPL); sheets based on thermosetting resins; part 1: specification (ISO 4586-1:1987, modified); german version EN 438-1:1991) |
DIN EN 438-2-1992 |
装饰用高压层压制件(HPL).热固性树脂为基质的板材.第2部分:性能的测定(ISO4586-2-88修改) |
(Decorative high-pressure laminates (HPL); sheets based on thermosetting resins; part 2: determination of properties (ISO 4586-2:1988, modified); german version EN 438-2:1991) |
DIN EN 439-1995 |
焊接添料.电弧焊和切割用保护气体 |
(Welding consumables - Shielding gases for arc welding and cutting; German version EN 439:1994) |
DIN EN 440-1994 |
焊料.非合金钢和细粒钢金属气体保护焊用焊丝和溶敷金属.分类 |
(Welding consumables - Wire electrodes and deposits for gas-shielded metal arc welding of non-alloy and fine grain steels - Classification; German version EN 440:1994) |
DIN EN 441-1-1996 |
销售用冰柜.第1部分:术语和定义(包括更改A1:1995) |
(Refrigerated display cabinets - Part 1: Terms and definitions (includes amendment A1:1995); German version EN 441-1:1994 + A1:1995) |
DIN EN 441-10-1995 |
销售用冰柜.第10部分:气味检验和味道检验 |
(Refrigerated display cabinets - Part 10: Test for absence of odour and taste; German version EN 441-10:1994) |
DIN EN 441-11-1995 |
商业用冰柜.第11部分:操作者用安装,维护和规程 |
(Refrigerated display cabinets - Part 11: Installation, maintenance and user`s guide; German version EN 441-11:1994) |
DIN EN 441-12-1997 |
销售用冰柜.第12部分:测量与冷凝器分开安装的冰柜的产冷量 |
(Refrigerated display cabinets - Part 12: Measurement of the heat extraction rate of the cabinets when the condensing unit is remote from the cabinet; German version EN 441-12:1997) |
DIN EN 441-2-1995 |
销售用冰柜.第2部分:一般机械和物理要求 |
(Refrigerated display cabinets - Part 2: General mechanical and physical requirements; German version EN 441-2:1994) |
DIN EN 441-3-1995 |
销售用冰柜.第3部分:尺寸,面积和含量 |
(Refrigerated cabinets - Part 3: Linear dimensions, areas and volumes; German version EN 441-3:1994) |
DIN EN 441-4-1995 |
商业用冰柜.第4部分:一般检验条件 |
(Refrigerated display cabinets - Part 4: General test conditions; German version EN 441-4:1994) |
DIN EN 441-5-1996 |
销售用冰柜.第5部分:温度试验 |
(Refrigerated display cabinets - Teil 5: Temperature test; German version EN 441-5:1996) |
DIN EN 441-6-1995 |
销售用冰柜.第6部分:温度等级 |
(Refrigerated display cabinets - Part 6: Classification according to temperature; German version EN 441-6:1994) |
DIN EN 441-7-1995 |
销售用冰柜.第7部分:除霜检验 |
(Refrigerated display cabinets - Part 7: Defrosting test; German version EN 441-7:1994) |
DIN EN 441-8-1995 |
商业用冰柜.第8部分:水蒸气冷凝器的检验 |
(Refrigerated display cabinets - Part 8: Water vapour condensation test; German version EN 441-8:1994) |
DIN EN 441-9-1995 |
销售用冰柜.第9部分:电能消耗检验 |
(Refrigerated display cabinets - Part 9: Electrical energy consumption test; German version EN 441-9:1994) |