标准号 |
中文名称 |
英文名称 |
DIN EN 1019-1995 |
人员用水的化学处理.二氧化硫 |
(Chemicals used for treatment of water intended for human consumption - Sulfur dioxide; German version EN 1019:1995) |
DIN EN 1020-2002 |
有风扇支持燃烧气体和/或燃烧物质传输、净热输入功率不超过300kW的空间加热用非家用燃气式强制对流空气加热 |
(Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, incorporating a fan to assist transportation of combustion air and/or combustion products (includes Amendment A1:2001); German version EN 102 |
DIN EN 10200-1992 |
钢铁冶炼材料的化学分析.钢中硼含量的测定.分光光度法 |
(Chemical analysis of ferrous materials; determination of boron in steel; spectrophotometric method; german version EN 10200:1991) |
DIN EN 10202-2001 |
冷轧锡产品.电解锡板和电解铬/氧化铬涂层钢 |
(Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel; German version EN 10202:2001) |
DIN EN 10204-1995 |
冶金产品.检验文件型式 |
(Metallic products - Types of inspection documents (includes Amendment A1:1995); German version EN 10204:1991 + A1:1995) |
DIN EN 10204-2005 |
冶金产品.检验文件的类型 |
|
DIN EN 10205-1992 |
生产白铁皮和电镀铬钢板用冷轧薄钢板卷 |
(Cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel; german version EN 10205:1991) |
DIN EN 10207-1997 |
简单的压力容器用钢材.薄钢板,带钢和棒钢的交货技术条件 |
(Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars (includes Amendment A1:1997); German version EN 10207:1991 + A1:1997) |
DIN EN 10207-2005 |
简单压力容器用钢.钢板、带材和棒材的交货技术条件 |
|
DIN EN 10208-1-1998 |
易燃液体或气体用管道钢管.交货技术条件.第1部分:要求等级为A的管 |
(Steel pipes for pipe lines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A; German version EN 10208-1:1997) |
DIN EN 10208-2-1996 |
易燃液体或气体用管道钢管.交货技术条件.第2部分:要求等级为B的管 |
(Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirements class B; German version EN 10208-2:1996) |
DIN EN 10209-1996 |
涂釉低碳钢制冷轧扁平制品.交货技术条件 |
(Cold rolled low carbon steel flat products for vitrious enamelling - Technical delivery conditions; German version EN 10209:1996) |
DIN EN 1021-1-1994 |
家具.装璜家具易燃性的评估.第1部分:火源:燃着的香烟 |
(Furniture; assessment of the ignitability of upholstered furniture; part 1: ignition source: smouldering cigarette (ISO 8191-1:1987, modified); German version EN 1021-1:1993) |
DIN EN 1021-2-1994 |
家具.室内装璜家具易燃性的评估.第2部分:火源:等同于火柴的煤气火焰 |
(Furniture; assessment of the ignitability of upholstered furniture; part 2: ignition source: match flame equivalent (ISO 8191-2:1988, modified); German version EN 1021-2:1993) |
DIN EN 10210-1-1994 |
非合金结构钢和精粒结构钢制的钢构件用热成型空心型件.第1部分:交货技术要求 |
(Hot finished structural hollow sections of non-alloy and fine grain structural steels - Part 1: Technical delivery requirements; German version EN 10210-1:1994) |
DIN EN 10210-2-1997 |
非合金和细晶粒结构钢的热精加工结构空心型材.第2部分:公差,尺寸和分段特性 |
(Hot finished structural hollow sections of non-alloy and fine grain structural steels - Part 2: Tolerances, dimensions and sectional properties; German version EN 10210-2:1997) |
DIN EN 10211-1996 |
钢铁材料的化学分析.钢和铁中钛含量测定.火焰原子吸收光谱测定法 |
(Chemical analysis of ferrous materials - Determination of titanium in steel and iron - Flame atomic absorption spectrometric method; German version EN 10211:1995) |
DIN EN 10212-1995 |
生铁材料的化学分析.用分光光度法测定钢和铁中的砷含量 |
(Chemical analysis of ferrous materials - Determination of arsenic in steel and iron - Spectrophotometric method; German version EN 10212:1995) |
DIN EN 10213-1-1996 |
压力容器用铸钢的交货技术条件.第1部分:概述 |
(Technical delivery conditions for steel castings for pressure purposes - Part 1: General; German version EN 10213-1:1995) |
DIN EN 10213-2-1996 |
压力容器用铸钢的交货技术条件.第2部分:室温和高温下使用的钢种 |
(Technical delivery conditions for steel castings for pressure purposes - Part 2: Steel grades for use at room temperature and elevated temperatures; German version EN 10213-2:1995) |
DIN EN 10213-3-1996 |
压力容器用铸钢的交货技术条件.第3部分:低温下使用的钢种 |
(Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel grades for use at low temperatures; German version EN 10213-3:1995) |
DIN EN 10213-4-1996 |
压力容器用铸钢的交货技术条件.第4部分:奥氏体和奥氏体铁素钢种 |
(Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic and austenitic-ferritic steel grades; German version EN 10213-4:1995) |
DIN EN 10214-1995 |
连续热浸镀调质带锌铝覆层的钢带和薄板.交货技术条件 |
(Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet - Technical delivery conditions; German version EN 10214:1995) |
DIN EN 10215-1995 |
连续热浸镀调质带铝锌覆层的钢带和薄板.交货技术条件 |
(Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet - Technical delivery conditions; German version EN 10215:1995) |
DIN EN 10216-1-2002 |
压力载荷用无缝钢管.交货技术条件.第1部分:特定室温特性的非合金钢管 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10216-1:2002) |
DIN EN 10216-1-2004 |
压力载荷用无缝钢管.交货技术条件.第1部分:特定室温特性的非合金钢管 |
|
DIN EN 10216-2-2002 |
压力载荷用无缝钢管.交货技术条件.第2部分:具有较高温度下规定性能的非合金和合金钢管 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10216-2:2002) |
DIN EN 10216-2-2004 |
压力载荷用无缝钢管.交货技术条件.第2部分:带特定高温性能的非合金和合金钢管 |
|
DIN EN 10216-3-2002 |
压力载荷用无缝钢管.交货技术条件.第3部分:细粒合金钢管 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10216-3:2002) |
DIN EN 10216-3-2004 |
压力载荷用无缝钢管.交货技术条件.第3部分:合金细粒钢管 |
|
DIN EN 10216-4-2002 |
压力载荷用无缝钢管.交货技术条件.第4部分:有低温特性的非合金和合金钢管 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties; German version EN 10216-4:2002) |
DIN EN 10216-4-2004 |
压力载荷用无缝钢管.交货技术条件.第4部分:带特定低温性能的非合金和合金钢管 |
|
DIN EN 10216-5-2004 |
压力用途无缝钢管.交货技术条件.第5部分:不锈钢管 |
|
DIN EN 10217-1-2002 |
压力载荷用焊接钢管.交货技术条件.第1部分:具有室温下规定性能的非合金钢管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10217-1:2002) |
DIN EN 10217-2-2002 |
压力载荷用焊接钢管.交货技术条件.第2部分:具有较高温度下规定性能的电焊非合金和合金钢管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10217-2:2002) |
DIN EN 10217-3-2002 |
压力载荷用焊接钢管.交货技术条件.第3部分:细粒合金钢管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10217-3:2002) |
DIN EN 10217-4-2002 |
压力载荷用焊接钢管.交货技术条件.第4部分:具有低温下规定性能的电焊非合金钢管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties; German version EN 10217-4:2002) |
DIN EN 10217-5-2002 |
压力载荷用焊接钢管.交货技术条件.第5部分:具有较高温度下规定性能的埋弧焊接非合金和合金钢管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10217-5:2002) |
DIN EN 10217-6-2002 |
压力载荷用焊接钢管.交货技术条件.第6部分:具有低温下规定性能的埋弧焊接非合金钢管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties; German version EN 10217-6:2002) |
DIN EN 10217-7-2005 |
压力用途焊接钢管.交货技术条件.第7部分:不锈钢管 |
|
DIN EN 10217-7-2005 |
压力用途焊接钢管.交货技术条件.第7部分:不锈钢管 |
|
DIN EN 10218-1-1994 |
钢丝和线材产品.概述.第1部分:检验方法 |
(Steel wire and wire products; general; part 1: test methods; German version EN 10218-1:1994) |
DIN EN 10218-2-1996 |
钢丝和线材产品.概述.第2部分:线材尺寸和公差 |
(Steel wire and wire products - General - Part 2: Wire dimensions and tolerances; German version EN 10218:1996) |
DIN EN 10219-1-1997 |
非合金结构钢和细晶粒结构钢的冷成形结构空心型材.第1部分:交货技术要求 |
(Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery requirements; German version EN 10219-1:1997) |
DIN EN 10219-2-1997 |
非合金结构钢和细晶粒结构钢的冷成形结构空心型材.第2部分:公差,尺寸和分段性能 |
(Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties; German version EN 10219-2:1997) |
DIN EN 1022-1997 |
居室家具.可就坐的家具.稳定性测试 |
(Domestic furniture - Seatings - Determination of stability; German version EN 1022:1996) |
DIN EN 1022-2005 |
居室家具.座椅.稳定性测定 |
|
DIN EN 10220-2003 |
无缝钢管.单位长度尺寸重量通用表 |
(Seamless and welded steel tubes - General tables of dimensions and masses per unit length; German version EN 10220:2002) |
DIN EN 10221-1996 |
热轧钢棒和线材的表面质量等级.交货技术条件 |
(Surface quality classes for hot-rolled round bars and rods - Technical delivery conditions; German version EN 10221:1995) |
DIN EN 10222-1-2002 |
压力容器用钢锻件.第1部分:自由成型锻件的一般要求 |
(Steel forgings for pressure purposes - Part 1: General requirements for open die forgings (includes Amendment A1:2002); German version EN 10222-1:1998 + A1:2002) |
DIN EN 10222-2-2000 |
压力容器用钢锻件.第2部分:特定高温性能的铁素体和马氏体钢 |
(Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties (including corrigendum AC:2000); German version EN 10222-2:1999 + AC:2000) |
DIN EN 10222-3-1999 |
压力罐用钢制锻件.第3部分:低温下有确定性能的镍钢 |
(Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties; German version EN 10222-3:1998) |
DIN EN 10222-4-2001 |
压力容器用钢锻件.第4部分:高弹限强度的可焊接细晶粒钢 |
(Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength (includes Amendment A1:2001); German version EN 10222-4:1998 + A1:2001) |
DIN EN 10222-5-2000 |
压力容器用钢锻件.第5部分:马氏体、奥氏体和奥氏体铁素体不锈钢 |
(Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels; German version EN 10222-5:1999) |
DIN EN 10223-1-1998 |
栅栏用钢丝和钢丝制品.第1部分:锌和锌合金涂层的有刺钢丝 |
(Steel wire and wire products for fences - Part 1: Zinc and zinc-alloy coated steel barbed wire; German version EN 10223-1:1997) |
DIN EN 10223-2-1998 |
栅栏用钢丝和钢丝制品.第2部分:农业,隔离和栅栏用六角网目钢丝编织物 |
(Steel wire and wire products for fences - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes; German version EN 10223-2:1997) |
DIN EN 10223-2-2004 |
栅栏用钢丝和钢丝制品.第2部分:农用隔离和栅栏用六角形钢丝网 |
|
DIN EN 10223-3-1998 |
栅栏用钢丝和钢丝制品.第3部分:建筑用带六角网目的钢丝编织物 |
(Steel wire and wire products for fences - Part 3: Hexagonal steel wire netting for engineering purposes; German version EN 10223-3:1997) |
DIN EN 10223-4-1998 |
栅栏用钢丝和钢丝制品.第4部分:栅栏用钢丝焊接的格网 |
(Steel wire and wire products for fences - Part 4: Steel wire welded mesh fencing; German version EN 10223-4:1998) |
DIN EN 10223-5-1998 |
栅栏用钢丝和钢丝制品.第5部分:栅栏用钢丝铰链网格和结节网格 |
(Steel wire and wire products for fences - Part 5: Steel wire woven hinged joint and knotted mesh fencing; German version EN 10223-5:1998) |
DIN EN 10223-6-1998 |
栅栏用钢丝和钢丝制品.第6部分:栅栏用正方形网目的钢丝编织物 |
(Steel wire and wire products for fences - Part 6: Steel wire chain link fencing; German version EN 10223-6:1998) |
DIN EN 10223-7-2003 |
栏栅用钢丝和钢丝制品.第7部分:栏栅用焊接钢丝板条 |
(Steel wire and wire products for fences - Part 7: Steel wire welded panels for fencing; German version EN 10223-7:2002) |
DIN EN 10224-2005 |
水和其他水成液输送用非合金管和配件.交货技术条件 |
|
DIN EN 10225-2002 |
固定近海结构的可焊接结构钢.技术交货条件 |
(Weldable structural steels for fixed offshore structures - Technical delivery conditions; German version EN 10225:2001) |
DIN EN 10226-1-2004 |
有压力紧固连接件的管道螺纹.第1部分:锥形外螺纹和平行内螺纹.尺寸、公差和名称与符号 |
|
DIN EN 10226-3-2005 |
螺纹上有压力密封接缝的管螺纹.第3部分:通过极限量规验证 |
|
DIN EN 10226-3-2005 |
螺纹上有压力密封接缝的管螺纹.第3部分:通过极限量规验证 |
|
DIN EN 10228-1-1999 |
钢锻件的无损检验.第1部分:磁粉探伤 |
(Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection; German version EN 10228-1:1999) |
DIN EN 10228-2-1998 |
钢锻件的无损检验.第2部分:渗透检验 |
(Non-destructive testing of steel forgings - Part 2: Penetrant testing; German version EN 10228-2:1998) |
DIN EN 10228-3-1998 |
钢制锻件的无损检验.第3部分:铁氧体钢制或马氏体钢制锻件的超声波试验 |
(Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings; German version EN 10228-3:1998) |
DIN EN 10228-4-1999 |
钢锻件的无损检验.第4部分:奥氏和奥氏铁氧体非合金钢锻件的超声波检验 |
(Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings; German version EN 10228-4:1999) |
DIN EN 10229-1998 |
评定钢制品抗氢感应形成裂纹的性能(HIC) |
(Evaluation of resistance of steel products to hydrogen induced cracking (HIC); German version EN 10229:1998) |
DIN EN 1023-1-1996 |
办公室家具.隔断墙板.第1部分:尺寸 |
(Office furniture - Screens - Part 1: Dimensions; German version EN 1023-1:1996) |
DIN EN 1023-2-2001 |
办公室家具.隔断墙板.第2部分:机械安全要求 |
(Office furniture - Screens - Part 2: Mechanical safety requirements; German version EN 1023-2:2000) |
DIN EN 1023-3-2001 |
办公室家具.隔断墙板.第3部分:试验方法 |
(Office furniture - Screens - Part 3: Test methods; German version EN 1023-3:2000) |
DIN EN 10230-1-2000 |
钢丝钉.第1部分:一般用途的散装钉 |
(Steel wire nails - Part 1: Loose nails for general applications; German version EN 10230-1:1999) |
DIN EN 10232-1994 |
金属材料.管材(管截面).弯曲试验 |
(Metallic materials; tube (in full section); bend test; German version EN 10232:1993) |
DIN EN 10233-1994 |
金属材料.管材.环形折曲试验 |
(Metallic materials; tube; flattening test; German version EN 10233:1993) |
DIN EN 10234-1994 |
金属材料.管材.扩管试验 |
(Metallic materials; tube; drift expanding test; German version EN 10234:1993) |
DIN EN 10235-1994 |
金属材料.管材.折缘试验 |
(Metallic materials; tube; flanging test; German version EN 10235:1993) |
DIN EN 10236-1994 |
金属材料.管材.扩管试验 |
(Metallic materials; tube; ring expanding test; German version EN 10236:1993) |
DIN EN 10237-1994 |
金属材料.管.环状试样拉力试验. |
(Metallic materials; tube; ring tensile test; German version EN 10237:1993) |
DIN EN 10238-1996 |
结构钢制经自动喷射和自动涂层处理的产品 |
(Automatically blast-cleaned and automatically prefabrication primed structural steel products; German version EN 10238:1996) |
DIN EN 1024-1997 |
不连续铺设用粘土屋顶砖.几何特性测定 |
(Clay roofing tiles for discontinous laying - Determination of geometric characteristics; German version EN 1024:1997) |
DIN EN 10240-1998 |
钢管用内部和/或外部防护涂层.通过在自动设备中热浸镀锡进行的涂层的规定 |
(Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants; German version EN 10240:1997) |
DIN EN 10241-2000 |
螺纹钢管 |
(Steel threaded pipe; German version EN 10241:2000) |
DIN EN 10242-1995 |
可锻铸铁制螺纹管件 |
(Threaded pipe fittings in malleable cast iron; German version EN 10242:1994) |
DIN EN 10242/A1-1999 |
可锻铸铁制螺纹管件.修正A1 |
(Threaded pipe fitting in malleable cast iron; Amendment A1; German version EN 10242:1994/A1:1999) |
DIN EN 10242/A2-2003 |
可锻铸铁制螺纹管件.修正A2 |
(Threaded pipe fitting in malleable cast iron; Amendment A2; German version EN 10242:1994/A2:2003) |
DIN EN 10243-1 Berichtigung 1-2005 |
钢模锻件.尺寸公差.第1部分:落锤锻造件和垂直压力锻造件 |
|
DIN EN 10243-1 Berichtigung 1-2005 |
钢模锻件.尺寸公差.第1部分:落锤锻造件和垂直压力锻造件 |
|
DIN EN 10243-1-2000 |
钢热模锻件.尺寸公差.第1部分:落锤锻造和垂直压力锻造 |
(Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings; German version EN 10243-1:1999) |
DIN EN 10243-2 Berichtigung 1-2005 |
钢模锻件.尺寸公差.第2部分:在水平锻造机上的顶锻 |
|
DIN EN 10243-2 Berichtigung 1-2005 |
钢模锻件.尺寸公差.第2部分:在水平锻造机上的顶锻 |
|
DIN EN 10243-2-2000 |
钢热模锻件.尺寸公差.第2部分:在水平锻造机器上的顶锻 |
(Steel die forgings - Tolerances on dimensions - Part 2: Upset forgings made on horizontal forging machines; German version EN 10243-2:1999) |
DIN EN 10244-1-2001 |
钢线和钢线产品.钢线上的有色金属涂层.第1部分:一般规则 |
(Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles; German version EN 10244-1:2001) |
DIN EN 10244-2-2001 |
钢线和钢线产品.钢线上的有色金属涂层.第2部分:锌和锌合金涂层 |
(Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings; German version EN 10244-2:2001) |
DIN EN 10244-3-2001 |
钢线和钢线产品.钢线上的有色金属涂层.第3部分:铝涂层 |
(Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings; German version EN 10244-3:2001) |
DIN EN 10244-4-2001 |
钢线和钢线产品.钢线上的有色金属涂层.第4部分:锡涂层 |
(Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings; German version EN 10244-4:2001) |
DIN EN 10244-5-2001 |
钢线和钢线产品.钢线上的有色金属涂层.第5部分:镍涂层 |
(Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings; German version EN 10244-5:2001) |
DIN EN 10244-6-2001 |
钢线和钢线产品.钢线上的有色金属涂层.第6部分:铜、青铜和黄铜涂层 |
(Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings; German version EN 10244-6:2001) |
DIN EN 10245-1-2001 |
钢线和钢线产品.钢线上的有机涂层.第1部分:一般规则 |
(Steel wire and wire products - Organic coatings on wire - Part 1: General rules; German version EN 10245-1:2001) |
DIN EN 10245-2-2001 |
钢线和钢线产品.钢线上的有机涂层.第2部分:PVC涂层线 |
(Steel wire and wire products - Organic coatings on wire - Part 2: PVC coated wire; German version EN 10245-2:2001) |
DIN EN 10245-3-2001 |
钢丝和钢丝产品.钢丝上的有机涂层.第3部分:聚乙烯(PE)涂层丝 |
(Steel wire and wire products - Organic coatings on wire - Part 3: PE coated wire; German version EN 10245-3:2001) |
DIN EN 10245-4-2003 |
钢丝和钢丝产品.钢丝上的有机涂层.第4部分:聚酯涂层丝 |
(Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2003) |
DIN EN 10246-1-1996 |
钢管的无损检测.第1部分:证明密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验 |
(Non-destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness; German version EN 10246-1:1996) |
DIN EN 10246-10 Berichtigung 1-2001 |
DINEN10246-10的勘误 |
(Corrigenda to DIN EN 10246-10:2000-07) |
DIN EN 10246-10-2000 |
钢管的无损检验.第10部分:缺陷探测用自动熔融电弧焊接钢管焊缝的放射线检验 |
(Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections; German version EN 10246-10:2000) |
DIN EN 10246-11-2000 |
钢管的无损试验.第11部分:表面缺陷探测用的无缝和焊接钢管的液体渗透试验 |
(Non-destructive testing of steel tubes - Part 11: Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections; German version EN 10246-11:2000) |
DIN EN 10246-12-2000 |
钢管的无损检验.第12部分:表面缺陷探测用无缝和焊接铁磁钢管的磁粉探伤 |
(Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections; German version EN 10246-12:2000) |
DIN EN 10246-13-2000 |
钢管的无损检验.第13部分:无缝和焊接(埋弧焊除外)钢管的自动全周超声波测厚检验 |
(Non-destructive testing of steel tubes - Part 13: Automatic full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc welded) steel tubes; German version EN 10246-13:2000) |
DIN EN 10246-14-2000 |
钢管的无损试验.第14部分:无缝和焊接钢管(埋头焊接除外)叠层缺陷检测的自动超声波试验.德文版本EN10246-14: |
(Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections; German version EN 10246-14:1999) |
DIN EN 10246-15-2000 |
钢管的无损检验.第15部分:用于检测层状缺陷的焊接钢管生产时用的带材/板材的自动超声波检验 |
(Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections; German version EN 10246-15:2000) |
DIN EN 10246-16-2000 |
钢管的无损检验.第16部分:层状缺陷检测用焊接钢管焊缝区域的自动超声波检验 |
(Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections; German version EN 10246-16:2000) |
DIN EN 10246-17-2000 |
钢管的无损检验.第17部分:层状缺陷检测用无缝和焊接钢管管端的超声波检验 |
(Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections; German version EN 10246-17:2000) |
DIN EN 10246-18-2000 |
钢管的无损检验.第18部分:层状缺陷检测用无缝和焊接铁磁钢管管端的磁粉探伤 |
(Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of the tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections; German version EN 10246-18:2000) |
DIN EN 10246-2-2000 |
钢管的无损试验.第2部分:证明液压渗漏紧密性的无缝和焊接(埋弧焊接除外)的奥氏体和铁素体/奥氏体钢管的自动 |
(Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and ferritic-austenitic steel tubes for verification of hydraulic leak-tightness; German version EN 10246-2:20 |
DIN EN 10246-3-2000 |
钢管的无损试验.第3部分:无缝和焊接钢管(埋弧焊接除外)缺陷检测的自动涡电流试验.德文版本EN10246-3:1999 |
(Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections; German version EN 10246-3:1999) |
DIN EN 10246-4-2000 |
钢管的无损检验.第4部分:横向不完整性检测用铁磁无缝钢管的自动全外围磁换能器检验/磁漏检验 |
(Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections; German version EN 10246-4:1999) |
DIN EN 10246-5-2000 |
钢管的无损检验.第5部分:纵向不完整性检测用铁磁无缝和焊接(埋弧焊接除外)钢管的自动全外围磁换能器检验/磁 |
(Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections; German ver |