标准号 |
中文名称 |
英文名称 |
| DIN 30674-5-1985 |
可锻铸铁管包覆层.聚乙烯薄膜包覆层 |
(External protection of ductile cast iron pipes; polyethylene sleeving) |
| DIN 30675-1-1992 |
地下敷设的管道的外层防腐.钢管的防腐措施和安装范围 |
(External corrosion protection of buried pipes; corrosion protection systems for steel pipes) |
| DIN 30675-2-1993 |
地下敷设管道的外部防腐.可锻铸铁管的安装范围和防护措施 |
(External corrosion protection of buried pipes; corrosion protection systems for ductile iron pipes) |
| DIN 30676-1985 |
外表面阴极防腐的设计与应用 |
(Design and application of cathodic protection of external surfaces) |
| DIN 30677-1-1991 |
地下敷设的管道配件外部防腐.一般要求用包封(外涂层) |
(Corrosion protection of burried valves; coating for normal requirement) |
| DIN 30677-2-1988 |
地下敷设管道配件外部防腐.高要求用热固性塑料包封(外涂层) |
(External corrosion protection of buried valves; heavy-duty thermoset plastics coatings) |
| DIN 30678-1992 |
钢管的聚丙烯涂层 |
(Polypropylen-coatings of steel-tubes) |
| DIN 3068-1972 |
钢丝绳.6×24加7个纤维芯的标准圆股钢丝绳 |
(Steel wire ropes; round strand rope 624 Standard + 7 fibre cores) |
| DIN 30680-1974 |
燃气装置用补偿器.橡胶弹性接头 |
(Compensators for gas-installations - Rubber expansion joints) |
| DIN 30681-1998 |
煤气装置用补偿器.带不锈钢风箱的风箱补偿器.安全技术要求,检验,标识 |
(Compensators for gas-installations - Stainless steel expansions joints with bellows units - Safety requirements, testing, marking) |
| DIN 30682-1982 |
洗衣机房洗衣机用耗煤气装置 |
(Gas-appliances for laundry-machinery) |
| DIN 30683-1-1978 |
面包房和糕点厂用煤气设备.采用自然通风燃烧器 |
(Gas-appliances with atmospheric gasburners for installations in bakeries and confectioneries) |
| DIN 30683-2-1984 |
面包房和糕点厂用煤气设备.采用鼓风煤气燃烧器的烘烤炉 |
(Gas appliances; forced air gasburners with ventilation in bakeries) |
| DIN 30690-1-1999 |
煤气输送设备的部件.第1部件:煤气输送设备中部件的要求 |
(Construction elements in the gas supply system - Part 1: Requirements for construction elements in gas supply systems) |
| DIN 30690-2 Bb.1-1980 |
煤气供应设备用构件.对煤气设备阀门用金属材料的要求.材料选用说明.强度值 |
(Component parts in the gas installation; requirements on metallic materials for valves being used for gas appliances, notes for selection for materials, strength data) |
| DIN 30690-2-1980 |
供气装置中的部件.煤气用具中调节器金属材料的要求 |
(Component parts in the gas installation; requirements on metallic materials for valves being used for gas appliances) |
| DIN 30692-2-1997 |
煤气分配和安装装置用隔膜.增强弹性隔膜材料的要求和检验 |
(Diaphragms for gas distribution and installation - Part 2: Requirements and test of reinforced diaphragm material) |
| DIN 30693-1980 |
液化气装置用软管断裂防护设备 |
(Safety devices against rupture of flexible tubes for LPG) |
| DIN 30694-4-1990 |
车辆中的液化气灶具.煮.烤.煎用器具.冰冻和冷冻箱.要求和检验 |
(Built-in appliances for LPG in vehicles; hotplates, ovens, grills, refrigerators and freezers; requirements and testing) |
| DIN 30695-1978 |
以液化气为燃料的移动式熔炼炉 |
(Mobile melting kettles with LPG-burners) |
| DIN 30696-1977 |
液化气用气化器 |
(Vaporisers for LPG) |
| DIN 30697-2-1982 |
便携式的热空气机.带或不带热离子交换机的烧油的热空气机.安全技术要求.检验.标志 |
(Portable fan assistend air heaters; oil fired air heaters with and without interchange of heat; safety requirements, testing, marking) |
| DIN 30697-3-1990 |
便携式风扇空气加热器.用热交换器的烧液化石油气的空气加热器.安全要求.试验标志 |
(Portable fan-assisted air heaters; LPG-fired air heaters with heat-exchanger; safety requirements, testing marking) |
| DIN 30699-1970 |
丙烷丁烷煤气灯.要求和检验 |
(Propan/Butan gaslamps; requirements and testing) |
| DIN 3070-1972 |
钢丝绳.10×10无螺旋搓制扁股钢丝绳 |
(Steel wire ropes; oval strand rope 1010, non-rotating) |
| DIN 30702-4-1980 |
公用车辆.冬季执勤汽车的概念 |
(Vehicles for communal purposes; terms of vehicles for snow fighting) |
| DIN 30702-5-1987 |
公用车辆.抽吸车和高压冲洗汽车 |
(Municipal vehicles; concepts suction vehicles and high pressure flushers) |
| DIN 30705-1-1987 |
抽吸汽车和高压冲洗汽车.下水道槽及沉泥井清理汽车.矿井清洁汽车 |
(Suction vehicles and high pressure flushers; vehicles for cleaning severs and gullies, vehicles for cleaning pits) |
| DIN 30705-4-1991 |
吸尘车和高压清洗车.高压清洗车 |
(Suction vehicles and high pressure flushers; high pressure flushers) |
| DIN 30706-2-1985 |
公用事业作业技术的概念.道路清洗 |
(Terms of communal purposes; street cleaning) |
| DIN 30706-3-2000 |
市政技术性服务术语.第3部分:冬季道路防冰雪设施 |
(Terminology of municipal technical services - Part 3: Winter road services) |
| DIN 30707-1-1993 |
扫雪汽车.实有体积≥1.5m**3的撒播(盐)车的要求 |
(Vehicles for snow removal; requirements for vehicles to strew, 1,5 m volume) |
| DIN 30707-2-1983 |
冬季值勤汽车.对带犁式铲雪器的扫雪汽车的要求 |
(Vehicles for snow removal; requirements for vehicles for snow clearing with snow ploughs) |
| DIN 30707-3-1995 |
冬季值勤汽车.第3部分:车辆和仪器用数据 |
(Vehicles for snow removal - Part 3: Data sheet for vehicles and devices) |
| DIN 30708-1990 |
雪犁.种类.要求 |
(Snow-ploughs; types, requirements) |
| DIN 30708-2004 |
雪犁.术语和要求 |
|
| DIN 30709-1989 |
带有效容积≥3立方米散料容器的自动装卸器 |
(Truck-mounted spreaders with volume 3 m) |
| DIN 30710-1990 |
车辆和仪表的安全标志 |
(Safety marking of vehicles and equipment) |
| DIN 30714-1990 |
清扫汽车的盘式扫帚.尺寸 |
(Circular brooms for road sweeping vehicles; dimensions) |
| DIN 30716-1988 |
街道清扫汽车的滚动式扫帚.尺寸 |
(Roller brushes for road swepping vehicles for street cleaning; dimensions) |
| DIN 30719-2002 |
容积500l-1300l的垃圾箱用容器存储外罩 |
(Container storage shell for waste containers with a capacity from 500 l to 1300 l) |
| DIN 30720-1990 |
多斗式倾翻车用容器.尺寸.材料.操作 |
(Containers for multi-bucket system vehicles; sizes, materials, performance) |
| DIN 30722-1-1993 |
滚动式倾卸车.变换装载装置.滚子容器.26吨以下滚动式倾卸车,钢制1570型带滚子容器 |
(Roller contact tipper vehicles up to 26 t; roller containers type 1570 made from steel) |
| DIN 30722-2-1993 |
滚动式倾卸车.变换装载装置.滚子容器.32吨以下滚动式倾卸车.钢制1570型带滚子容器 |
(Roller contact tipper vehicles up to 32 t; roller containers type 1570 made from steel) |
| DIN 30722-3-1993 |
滚动式倾卸车.变换装载装置.滚动容器.10吨以下滚动式倾卸车.钢制900型带滚子容器 |
(Roller contact tipper vehicles up to 10 t; roller containers type 900 made from steel) |
| DIN 30722-4-1994 |
滚动式倾卸车.变换装载装置.滚动容器.第4部分:街道和轨道运输用滚动容器 |
(Roller containers for the transport on road and rail) |
| DIN 30723-1998 |
翻斗卸货车辆.翻斗卸货装置.尺寸,要求 |
(Multi-bucket system vehicles, swivelling device - Dimensions, requirements) |
| DIN 30725-4-1990 |
公用车辆的操纵盘.扫雪机 |
(Control panels for municipal vehicles; snow-ploughs) |
| DIN 30727-1987 |
垃圾收集汽车.禁令牌.指示标志 |
(Refuse vehicles; prohibition plates and indicating labels) |
| DIN 30728-3-1981 |
公共工程的图形符号.街道清扫汽车.冬季值勤汽车 |
(Graphical symbols for communal purposes; vehicles for street cleaning, vehicles for snow removal) |
| DIN 30728-4-1983 |
公共工程的图形符号.矿井和下水道清洁汽车 |
(Graphical symbols for communal purposes; vehicles for cleaning of pits and sewers) |
| DIN 30728-5-1995 |
公共工程的图形符号.第5部分:带支架的悬挂式器具 |
(Graphical symbols for communal purposes - Part 5: Mounted implements with boom) |
| DIN 30730-1995 |
移动式废弃物压装机.拆卸式翻斗车和滚动翻斗车.要求.连接尺寸 |
(Mobile waste packer - Multi-bucket system vehicles and roller contact tippper vehicles; requirements, connection dimensions) |
| DIN 30731-2001 |
垃圾收集汽车.后倾翻倒空装置的接口条件 |
(Refuse collection vehicles - Interface conditions for rear-end loaded refuse collection vehicles) |
| DIN 30732-1-1987 |
公共汽车的液压装置.带两个液压回路的冬季值勤汽车 |
(Hydraulic systems for municipal vehicles; winter service vehicles with 2 hydraulic systems) |
| DIN 30733-2005 |
垃圾收集车用踏板及其固定 |
|
| DIN 30734-1998 |
圆形料仓卸料车和卸料翻倾装置车用可互换的单间圆形料仓(自由落下) |
(Interchangeable single-chamber silos (free fall) for use with lift-off and dumper vehicles - Connecting dimensions and requirements) |
| DIN 30735-1997 |
拆卸式翻斗车用最宽1520毫米的容器.尺寸,材料和结构 |
(Containers with a maximum width of 1520 mm for multi-bucket system vehicles - Sizes, materials, performance) |
| DIN 30736-2002 |
容积390l的垃圾箱用容器存储外罩 |
(Container storage shell for waste containers with a capacity to 390 l) |
| DIN 30737-2003 |
垃圾葙.带开盖设备和提升装置的2.5m3和5m3的容积的可移动装卸系统垃圾箱 |
(Waste containers - Mobile discharge system containers with hinged lid with capacities 2,5 m and 5 m for lifting devices with lid opener device) |
| DIN 30739-1998 |
额定容积为30升至60升有传染危险的废料用容器 |
(Container for highly infectious waste with an effective capacity of 30 l to 60 l for incineration) |
| DIN 30741-1-1992 |
垃圾箱.特殊固体垃圾用容积为800升的垃圾箱 |
(Garbage containers; garbage containers for special wastes; with a capacity 800 l for solid special wastes) |
| DIN 30741-2-1992 |
垃圾箱.特殊液体废物用容积为1000升的垃圾箱 |
(Garbage containers; garbage containers for special wastes; with a capacity 1000 l for liquid special wastes) |
| DIN 30742-1-1995 |
废弃物处理工程.液体和固体特殊废料用容器.第1部分:金属材料制容积为60L至240L的容器 |
(Waste disposal engineering - Waste containers for liquid and solid special waste - Part 1: Containers with a capacity from 60 l to 240 l made from metal material) |
| DIN 30743-1995 |
废弃物处理工程.废料用容器存放和运输的装卸辅助装置 |
(Waste disposal engineering - Loading aid for the storage and transportation of waste containers for special wastes) |
| DIN 30744-1998 |
废物收集箱的识别和称重(读-写-程序).要求和检验 |
(Identifying and weighing waste containers (read-write-procedure) - Requirements and test methods) |
| DIN 30744-2-1998 |
废物收集箱的识别和称重.第2部分:阅读方法.要求和检验 |
(Identifying and weighing waste containers - Part 2: Read-procedure; requirements and test methods) |
| DIN 30760-2001 |
移动式垃圾箱.金刚石提升设备用80-360l容量的双轮垃圾箱 |
(Mobile waste containers - Waste containers with two wheels with a capacity from 80 l to 360 l for diamond lifting devices) |
| DIN 30770-2000 |
滑雪设备.安全要求 |
(Snow grooming equipment - Safety requirements) |
| DIN 30781-1 Bb.1-1989 |
运输链.基本概念.解释 |
(Transportation chain; basic concepts; explanations) |
| DIN 30781-1-1989 |
运输链.基本概念 |
(Transportation chain; basic concepts) |
| DIN 30781-2-1989 |
运输链.运输工具的分类及运输路程 |
(Transportation chain; classification of means of transport and transport routes) |
| DIN 30783-1-1982 |
运输链上的单配置.水平方向尺寸座标.概念.原理 |
(Mudular order in der transportation chain; Horizontal dimensional coordination; Concepts, principles) |
| DIN 30784 Bb.1-1986 |
运输链；货币与证券用运输链；模数配合；与其它领域的技术关联 |
(Transportation chain; transportation chain for money and values; modular coordination; technical linkage with other fields) |
| DIN 30784-1-1986 |
运输链；货币与证券用运输链；模数配合 |
(Transportation chain; transportation chain for money and securities; modular coordination) |
| DIN 30784-2-1992 |
运输链.货币和证券用运输链.现金盒.堆垛负载量的尺寸和要求 |
(Transportation chain; transportation chain for money and securities; cash-boxes; dimensions and requirements for the stacking capacity) |
| DIN 30784-3-2000 |
运输链.货币和证券用运输链.自动现金支付机用现金盒协调尺寸和接口要求 |
(Transportation chain - Transportation chain for money and securities - Part 3: Cash boxes for cash dispensers, coordinational dimensions, requirements for interfaces) |
| DIN 30785-1977 |
起重作业中的吊具.类型和术语 |
(Slinging in lifting-operations; types and terms) |
| DIN 30786-1-2002 |
运输载荷.动态机械载荷的数据收集.第1部分:标准结构的基本原理和综览 |
(Transportation loads - Data collection of dynamic mechanical loads - Part 1: Principles and survey on structure of the standards) |
| DIN 30786-2-2005 |
运输载荷.动态机械载荷的数据收集.第2部分:数据收集 |
|
| DIN 30787-1-2002 |
运输荷载.动力机械荷载的测量和评价.第1部分:一般要求 |
(Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 1: General requirements) |
| DIN 30787-2-2001 |
运输荷载.动力机械荷载的测量和评价.第2部分:测量设备的数据采集和一般要求 |
(Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 2: Data acquisition and general requirements for measuring equipment) |
| DIN 30787-3-2001 |
运输荷载.动力机械荷载的测量和评价.第3部分:评价用数据的有效性检验和数据编辑 |
(Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 3: Data validity check and data editing for evaluation) |
| DIN 30787-4-2002 |
运输荷载.动力机械荷载的测量和评价.第4部分:数据评定 |
(Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 4: Data evaluation) |
| DIN 30787-5-2002 |
运输荷载.动力机械荷载的测量和评价.第5部分:试验规范的起源 |
(Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 5: Derivation of test specifications) |
| DIN 30787-6-2001 |
运输荷载.动力机械荷载的测量和评价.第6部分:在监测运输时测量随机振动用的自动记录系统 |
(Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 6: Automatic recording systems for measuring random shock while monitoring transports) |
| DIN 30790-1991 |
滚动容器.具有可拆卸板的滚动托盘.尺寸和安全技术要求 |
(Rolling containers; wheeled plate with detachable walls; dimensions and safety regulations) |
| DIN 30791-2-1991 |
运输链.车票.概念 |
(Transportation chain; ticket; terms) |
| DIN 30795 Bb.1-1996 |
公共客运信息.车票销售信息.实际应用实例 |
(Public transport passenger information - Information for the sale of tickets - Examples for use) |
| DIN 30795-1-1996 |
公共客运信息.第1部分:车票销售信息.信息显示和操作系统构成和布置的一般规定 |
(Public transport passenger information - Part 1: Information for the sale of tickets - Basis for formation and layout of information displays and operating systems) |
| DIN 30795-2-1996 |
公共客运信息.第2部分:带选择键的固定自动装置上显示的车票销售信息.信息显示和操作系统布置和设计 |
(Public transport passenger information - Teil 2: Information for the sale of tickets from stationary ticket machines with buttonselector - Formation and layout of information displays and operating systems) |
| DIN 30795-3-1996 |
公共客运信息.第3部分:带十个选择按键的固定自动装置上显示的车票销售信息.信息显示和操作系统布置和设计 |
(Public transport passenger information - Part 3: Information for the sale of tickets from stationary ticket machines with ten-button-selector-panel - Formation and layout of information displays and operating systems) |
| DIN 30795-4-1996 |
公共客运信息.第4部分:带选择键的公共运输车辆内售票机上显示的车票销售信息.信息显示和操作系统布置和设计 |
(Public transport passenger information - Teil 4: Information for the sale of tickets from ticket machines with buttonselector inside of public transport vehicles - Formation and layout of information displays and operating systems) |
| DIN 30795-5-1996 |
公共客运信息.第5部分:从固定式自动售票装置中售出的车票上打印的售价及时间等信息.信息显示和操作系统布置 |
(Public transport passenger information - Part 5: Information for the sale of stamps for tickets from stationary ticket machines - Formation and layout of information displays and operating systems) |
| DIN 30795-6-1996 |
公共客运信息.第6部分:驾驶员销售车票的站台预告信息.信息显示和操作系统布置和设计 |
(Public transport passenger information - Part 6: Information at stops for the sale of tickets throught the driver- Formation and layout of information displays) |
| DIN 30795-7-1997 |
公共客运信息.第7部分:对话式售票机出售乘车凭证的信息.信息显示和操作件的排列和设计 |
(Public transport passenger information - Part 7: Information for the sale of tickets from ticket machines in conversation mode; formation and layout of information displays) |
| DIN 30798-1-1982 |
模数系统.模数顺序.概念 |
(Modular systems; Modular coordination; Terminology) |
| DIN 30798-2-1982 |
模数系统.模数顺序.原理 |
(Modular systems; Modular coordination; Principles) |
| DIN 30798-3-1982 |
模数系统.模数顺序.应用原理 |
(Modular systems; Modular coordination; Principles for the application) |
| DIN 30798-4-1985 |
模数系统.模数顺序.图的画法 |
(Modular systems; modular orders; representation in drawings) |
| DIN 30800-1-1993 |
运输链.运输链的转运技术.散装材料轨道运输用运输链.说明和连接标准 |
(Transportation chain; technique of transshipment in the transportation chain; transportation chain for the bulk freight-rail traffic; descriptions and linkage criterions) |
| DIN 30800-2-1993 |
运输链.运输链的转运技术.散装材料和散装材料车的类别 |
(Transportation chain; technique of transshipment in the transportation chain; assignment of bulk freights and bulk freight wagons) |
| DIN 30800-3 Bb.1-1994 |
运输链.运输链的转运技术.散装材料轨道运输用转运方法和交接.转运设备和散装材料车的类别.转运设备的简要说 |
(Transportation chain - Technique of transshipment in the transportation chain - Procedures and interfaces in bulk freight rail traffic; allocation of transshipment installations and bulk freight wagons; short description of transshipment installations) |
| DIN 30800-3-1993 |
运输链.运输链的转运技术.散装材料轨道运输用转运方法和交接.转运设备和散装材料车的类别 |
(Transportation chain; technique of transshipment in the transportation chain; intersection in bulk freight rail traffic; allocation from the technique of installations and the bulk freight wagons) |
| DIN 30801-2004 |
运输链中转船的技术.散装货物货车的装载.货车/装载设备的接口 |
|
| DIN 30802-1-2004 |
运输链中的转船技术.散装货物货车的卸载.第1部分:货车/卸载设备的接口 |
|
| DIN 30802-2-2005 |
运输链中的转船技术.散装货物货车的卸载.第2部分:侧向自卸货车/卸载设备的接口 |
|
| DIN 30802-3-2005 |
运输链中的转船技术.散装货物货车的卸载.第3部分:轴向自卸货车/卸载设备的接口 |
|
| DIN 30803-2005 |
运输链中转运技术.自动倾卸车的除霜/防冻保护 |
|
| DIN 30823-2001 |
中等容量容器.硬质IBC.金属,硬质,塑料和复合中等容量容器.尺寸,设计和要求,标记 |
(Intermediate bulk containers - Rigid IBC - Metal, rigid plastics and composite intermediate bulk containers; Dimensions, design requirements, marking) |
| DIN 3088-1989 |
钢丝绳.提升操作用起吊绳.安全技术要求和检验 |
(Steel wire rope slings for lifting purposes; safety requirements, marking and assembly) |
| DIN 3089-2-1984 |
钢丝绳.捻接绳.纵向捻接 |
(Steel wire ropes; splices; long splice) |
| DIN 3091-1988 |
索环.钢丝绳用实心索环 |
(Thimbles; solid thimbles for wire ropes) |
| DIN 30910-1-1990 |
烧结金属.烧结材料说明活页（ＷＬＢ）.ＷＬＢ提示 |
(Sintered metal materials; Werkstoff-Leistungsbl則ter (WLB) sint-material specifications; part 1: explanatory notes for WLB) |
| DIN 30910-2-1990 |
烧结金属.烧结材料说明活页（ＷＬＢ）.过滤器用烧结金属制品 |
(Sintered metal materials; Werkstoff-Leistungsbl則ter (WLB) sint-material specifications; part 2: materials for filters) |
| DIN 30910-3-2004 |
烧结金属材料.烧结金属规范.第3部分:轴承及具有轴承性能的结构件用材料 |
|
| DIN 30910-4-2004 |
烧结金属材料.烧结金属规范.第4部分:结构件用材料 |
|
| DIN 30910-5-1990 |
烧结金属.烧结材料说明活页（ＶＬＢ）.具有软磁性能的异型件用烧结金属 |
(Sintered metal materials; Werkstoff-Leistungsbl則ter (WLB) sint-material specifications; part 5: materials for structural parts with soft-magnetic properties) |
| DIN 30910-6-1990 |
烧结金属.烧结材料说明活页（ＷＬＢ）.异型件用烧结锻钢 |
(Sintered metal materials; Werkstoff-Leistungsbl則ter (WLB) sint-material specifications; part 6: hot-forged sintered steels for structural parts) |
| DIN 30911-0-1990 |
烧结金属.烧结检验标准（ＳＰＮ）.SPN说明 |
(Sintered metal materials; sint-testing procedures; part 0: explanatory notes for SPN) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com