标准号 |
中文名称 |
英文名称 |
| DIN EN 1704-1997 |
塑料管道系统.热塑塑料管件.弯曲中温度变化后管件完好性的检验方法 |
(Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending; German version EN 1704:1997) |
| DIN EN 1705-1997 |
塑料管道系统.热塑管件.外部冲击负荷后管件完好性的试验方法 |
(Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow; German version EN 1705:1996) |
| DIN EN 1706-1998 |
铝和铝合金.铸件.化学成份和机械性能 |
(Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties; German version EN 1706:1997) |
| DIN EN 1707-1997 |
注射器,套管针和某些其他医疗器械用锥度为6%(吕埃尔)的圆锥连接件.可闩上的圆锥连接件 |
(Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Lock fittings; German version EN 1707:1996) |
| DIN EN 1708-1-1999 |
焊接.钢焊接时的连接件.第1部分:受压力负荷的组件 |
(Welding - Basic weld joint details in steel - Part 1: Pressurized components; German version EN 1708-1:1999) |
| DIN EN 1708-2-2000 |
焊接.钢焊接时的连接件.第2部分:无内压的组件 |
(Welding - Basic weld joint details in steel - Part 2: Non internal pressurized components; German version EN 1708-2:2000) |
| DIN EN 1709-2005 |
载人用索道装置的安全要求.预运行检查、维修、操作检查和检验 |
|
| DIN EN 171-2002 |
人眼防护.红外线滤光镜.透射要求和推荐使用 |
(Personal eye protection - Infrared filters - Transmittance requirements and recommended use; German version EN 171:2002) |
| DIN EN 171000-2002 |
总规范.使用波导型介电谐振器的滤波器 |
(Generic specification - Filters using waveguide type dielectric resonators; German version EN 171000:2001) |
| DIN EN 1711-2000 |
焊接的无损检验.通过多平面分析进行焊接的涡流检验 |
(Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis; German version EN 1711:2000) |
| DIN EN 1712-2002 |
焊缝的无损检验.焊接连接件的超声波检验.允许极限值 |
(Non-destructive testing of welds - Ultrasonic testing of welded joints - Acceptance levels; German version EN 1712:1997 + A1:2002) |
| DIN EN 1713-2002 |
焊缝的无损检验.超声波检验.焊缝的表示特征 |
(Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds; German version EN 1713:1998 + A1:2002) |
| DIN EN 1714-2002 |
焊缝的无损检验.焊接连接件的超声波检验 |
(Non-destructive testing of welds - Ultrasonic testing of welded joints; German version EN 1714:1997 + A1:2002) |
| DIN EN 1715-1-1997 |
铝和铝合金.轧制台.第1部分:检验和交货的一般要求和技术条件 |
(Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and technical conditions for inspection and delivery; German version EN 1715-1:1997) |
| DIN EN 1715-2-1997 |
铝和铝合金.轧制台.第2部分:电器技术应用的特殊要求 |
(Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical applications; German version EN 1715-2:1997) |
| DIN EN 1715-3-1997 |
铝和铝合金.拔丝原料.第3部分:机械使用的特殊要求(不包括焊接) |
(Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding); German version EN 1715-3:1997) |
| DIN EN 1715-4-1997 |
铝和铝合金.轧制台.第4部分:焊接的特殊要求 |
(Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications; German version EN 1715-4:1997) |
| DIN EN 1716-1997 |
塑料管道系统.聚乙烯(PE)开孔三通件.安装好的开孔三通上抗冲击应力的检测方法 |
(Plastics piping systems - Polyethylene (PE) tapping tees - Test method for impact resistance of an asssembled tapping tee; German version EN 1716:1997) |
| DIN EN 1717-2001 |
防止回流导致的污染的装置的一般要求和便携水安装的污染防止.DVGW技术规则 |
(Protection against pollution of potable water installations and general requirements of devices to prevent pollution by backflow - Technical rule of the DVGW; German version EN 1717:2000) |
| DIN EN 1718-1999 |
轻型运输带.运转中输送带产生的静电场测定用检测方法 |
(Light conveyor belts - Test method for the measurement of the electrostatic field generated by a running light conveyor belt; German version EN 1718:1999) |
| DIN EN 1719-1998 |
纸张,包装材料和卫生制品用粘结剂.粘接材料表面粘性的测量.用环钉法测定表面粘性 |
(Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of loop tack; German version EN 1719:1998) |
| DIN EN 172-2002 |
人眼保护装置.工业用强光过滤镜 |
(Personal eye-protections - Sunglare filters for industrial use (includes Amendment A1:2000 and A2:2001); German version EN 172:1994 + A1:2000 + A2:2001) |
| DIN EN 1720-1998 |
纸张,包装材料和卫生制品用粘结剂.可分散性测定 |
(Adhesives for paper and board, packaging and disposable sanitary products - Determination of dispersability; German version EN 1720:1998) |
| DIN EN 1721-1998 |
纸张,包装材料和卫生产品用粘结剂.粘附粘接剂表面粘性的测量.按照滚球法测量表面粘性 |
(Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of rolling ball tack; German version EN 1721:1998) |
| DIN EN 1722-1999 |
轻型输送带.测定最大拉伸强度的检验方法 |
(Light conveyor belts - Test method for the determination of the maximum tensile strength; German version EN 1722:1999) |
| DIN EN 1723-1999 |
轻质输送带.松驰弹性模量测定的试验方法 |
(Light conveyor belts - Method of test for the determination of the relaxed elastic modulus; German version EN 1723:1999) |
| DIN EN 1724-1999 |
轻型输送带.测定摩擦值的试验方法(含校正AC:1999) |
(Light conveyor belts - Test method for the determination of the coefficient of friction (including Corrigendum AC:1999); German version EN 1724:1998 + AC:1999) |
| DIN EN 1725-1998 |
家具.床和床垫.安全技术要求和检验方法 |
(Domestic furniture - Beds and mattresses - Safety requirements and test methods; German version EN 1725:1998) |
| DIN EN 1726-1-1999 |
工业货车的安全.第1部分:容量不大于10000Kg的自行式货车和拖杆拉力不小于20000N的牵引车 |
(Safety of industrial trucks - Part 1: Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N; German version EN 1726-1:1998) |
| DIN EN 1726-1/A1-2004 |
工业货车的安全.容量不大于10000Kg的自行式货车和拖杆拉力不大于20000N的工业牵引车.第1部分:一般要求 |
|
| DIN EN 1726-2-2001 |
工业货车的安全.容量不大于10000Kg的自行式货车和拖杆拉力不大于20000N的牵引车.第2部分:带有高架操作者位 |
(Safety of industrial trucks - Self-propelled trucks up to and including 10000 kg capacity and tractors with a drawbar pull up to and including 20000 N - Part 2: Additional requirements for trucks with elevating operator position and trucks specifically d |
| DIN EN 1727-1998 |
居室家具.柜橱和台架.安全技术要求和检验方法 |
(Domestic furniture - Storage furniture - Safety requirements and test methods; German version EN 1727:1998) |
| DIN EN 1728-2004 |
家具.座椅.强度和耐久性测定的试验方法 |
|
| DIN EN 1730-2000 |
家具.桌子.强度、耐久性和稳定性测定的试验方法 |
(Domestic furniture - Tables - Test methods for determination of strength, durability and stability; German version of EN 1730:2000) |
| DIN EN 1731-1998 |
防止机械危害和/或高温的工业用和非工业用网罩型护目器和护面器 |
(Mesh type eye and face protectors for industrial and non-industrial use against mechanical hazards and/or heat (includes Amendment A1:1997); German version EN 1731:1997 + A1:1997) |
| DIN EN 1733-2003 |
呼吸道中使用的抽吸导管 |
(Suction catheters for use in the respiratory tract; German version EN 1733:2002) |
| DIN EN 1734-1997 |
用橡胶和塑料涂层的织物.水密封性测定.低压法 |
(Rubber- or plastics coated fabrics - Determination of resistance to water penetration - Low pressure method; German version EN 1734:1996) |
| DIN EN 1735-1997 |
用橡胶和塑料涂层的织物.柔韧性测定 |
(Rubber- or plastics coated fabrics - Determination of flexibility; German version EN 1735:1996) |
| DIN EN 1736-2000 |
制冷系统和热泵.软管件、隔振器和膨胀节.要求、设计和安装 |
(Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation; German version EN 1736:2000) |
| DIN EN 1737-1998 |
蒸气淬火气孔混凝土或孔隙轻型混凝土造的预制件用钢筋混凝土垫上或加固篮上焊接结点的断裂剪切力的测定 |
(Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1737:1998) |
| DIN EN 1738-1998 |
蒸气淬火气孔混凝土制非承重加强部件中钢应力测定 |
(Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete; German version EN 1738:1998) |
| DIN EN 1739-1998 |
结构件平面承载时蒸气淬火气孔混凝土预制件或堆放空隙轻型混凝土预制件之间缝隙的抗剪应力的测定 |
(Determination of shear strength for in-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1739:1998) |
| DIN EN 174-2001 |
人眼保护.高山滑雪用滑雪护目镜 |
(Personal eye-protection - Ski goggles for downhill skiing; German version EN 174:2001) |
| DIN EN 1740-1998 |
主要是纵向负载作用下(垂直构件)蒸气淬火气孔混凝土制或堆放空隙轻型混凝土制预制加强件的支承性能的测定 |
(Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components); German version EN 1740:1998) |
| DIN EN 1741-1998 |
负载垂直于结构件平面时蒸气淬火气孔混凝土制或堆放空隙轻型混凝土制预制件间缝隙的抗剪应力的测定 |
(Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1741:1998) |
| DIN EN 1742-1998 |
蒸气淬火气孔混凝土制或堆放空隙轻型混凝土制多层构件不同层之间的抗剪应力的测定 |
(Determination of shear strength between different layers or multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1742:1998) |
| DIN EN 1744-1-1998 |
岩石颗粒化学性能的试验方法.第1部分:化学分析 |
(Tests for chemical properties of aggregates - Part 1: Chemical analysis; German version EN 1744-1:1998) |
| DIN EN 1744-3-2002 |
集料化学性能的试验方法.第3部分:化学分析 |
(Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates; German version EN 1744-3:2002) |
| DIN EN 1744-4-2005 |
集料化学性能的试验.第4部分:沥青混合料用填充料的水敏感度测定 |
|
| DIN EN 1745-2002 |
砖石工程和砖石工程产品.测定设计热值的方法 |
(Masonry and masonry products - Methods for determining design thermal values; German version EN 1745:2002) |
| DIN EN 1746-1998 |
机器的安全性.拟定安全标准中有关噪音的章节的指南 |
(Safety of machinery - Guidance for the drafting of the noise clauses of safety standards; German version EN 1746:1998) |
| DIN EN 1748-1-1-2004 |
建筑玻璃.特种基础产品.硼硅酸盐玻璃.第1-1部分:定义和一般物理和机械性能 |
|
| DIN EN 1748-1-1998 |
建筑业用玻璃.特种基础产品.第1部分:硼硅酸盐玻璃 |
(Glass in building - Special basic products - Part 1: Borosilicate glasses; German version EN 1748-1:1997) |
| DIN EN 1748-1-2-2005 |
建筑用玻璃.特种基础产品.硼硅酸盐玻璃.第1-2部分:合格评价/产品标准 |
|
| DIN EN 1748-2-1-2004 |
建筑玻璃.特种基础产品.玻璃陶瓷.第2-1部分:定义和一般物理和机械性能 |
|
| DIN EN 1748-2-1998 |
建筑业用玻璃.特种基础产品.第2部分:玻璃陶瓷 |
(Glass in building - Special basic products - Part 2: Glass ceramics; German version EN 1748-2:1997) |
| DIN EN 1748-2-2-2005 |
建筑用玻璃.特种基础产品.玻璃陶瓷.第2-2部分:合格评价/产品标准 |
|
| DIN EN 175-1997 |
人员防护.焊接和相关工艺操作时眼及脸防护装置 |
(Personal protection - Equipment for eye and face protection during welding and allied processes; German version EN 175:1997) |
| DIN EN 1751-1999 |
建筑物中的通风.气配装置.节流件和闭锁件的空气动力检验 |
(Ventilation for buildings - Air terminal devices - Aerodynamic testing of dampers and valves; German version EN 1751:1998) |
| DIN EN 175101-802-2000 |
详细规范.基本结构为2.54mm格栅排列成3-4排的印制板用两件式连接器 |
(Detail specification - Two-part-connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows; Geman version EN 175101-802:1999) |
| DIN EN 175101-809-2000 |
详细规范.短结构符合CECC75101-801的经质量评定的2.54mm格栅印制板用两件式连接器 |
(Detail specification - Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75101-801, with assessed quality; German version EN 175101-809:1999) |
| DIN EN 175101-809-2004 |
详细规范.短结构符合CECC 75101-801的经质量评定的有2.54mm格栅的印制板用两件式连接器 |
|
| DIN EN 175200-1996 |
分规范.圆型插接件 |
(Sectional specification - Circular connectors; German version EN 175200:1996) |
| DIN EN 175201-804-2000 |
详细规范.圆形连接器.直径尺寸为1.6mm的螺纹耦合圆触点 |
(Detail specification - Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling; German version EN 17201-804:1999) |
| DIN EN 1753-1997 |
镁和镁合金.镁合金锭块和铸件 |
(Magnesium and magnesium alloys - Magnesium alloy ingots and castings; German version EN 1753:1997) |
| DIN EN 175300-1996 |
分规范.频率3MHz以下的矩型插接件 |
(Sectional specification - Rectangular connectors for frequencies below 3 MHz; German version EN 175300:1996) |
| DIN EN 175301-801-2000 |
详细规范.有圆形可移动卷曲触点的高密度矩形连接器 |
(Detail specification -High density rectangular connectors, round removable crimp contacts; German version EN 175301-801:1999) |
| DIN EN 175301-803-2000 |
详细规范.不可分开的自锁螺纹的平面接触厚度为0,8MM的矩形连接器 |
(Detail specification: Rectangular connectors - Flat contacts 0,8 mm thickness - Locking screw not detachable; German version EN 175301-803:1999) |
| DIN EN 1754-1997 |
镁和镁合金.镁和镁合金制阳极,锭坯和铸件.标识系统 |
(Magnesium and magnesium alloys - Magnesium and magnesium alloy anodes, ingots and castings - Designation system; German version EN 1754:1997) |
| DIN EN 1755-2000 |
工业卡车的安全.在有潜在爆炸可能性的环境中的操作.可燃气体,蒸气,烟雾和尘土中的使用 |
(Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust; German version EN 1755:2000) |
| DIN EN 1756-1-2002 |
尾部提升机.轮式车辆上安装的平台式提升机.安全要求.第1部分:货物用尾部提升机 |
(Tail lifts - Platform lifts for mounting on wheeled vehicles; Safety requirements - Part 1: Tail lifts for goods; German version EN 1756-1:2001) |
| DIN EN 1756-2 Berichtigung 1-2005 |
对DIN EN 1756-2-2004的勘误 |
|
| DIN EN 1756-2-2004 |
尾部提升机.轮式车辆上安装的平台式提升机.安全要求.第2部分:乘客用尾部提升机 |
|
| DIN EN 1757-1-2002 |
工业用卡车的安全.普通机动卡车.第1部分:堆垛运输卡车 |
(Safety of industrial trucks - Pedestrian propelled trucks - Part 1: Stacker trucks; German version EN 1757-1:2001) |
| DIN EN 1757-2-2002 |
工业用卡车的安全.普通机动卡车.第2部分:托盘卡车 |
(Safety of industrial trucks - Pedestrian propelled trucks - Part 2: Pallet trucks; German version EN 1757-2:2001) |
| DIN EN 1757-3-2003 |
工业货车安全.脚踏货车.第3部分:平板车 |
(Safety of industrial trucks - Pedestrian propelled manual and semi-manual trucks - Part 3: Platform trucks; German version EN 1757-3:2002) |
| DIN EN 1758-1998 |
铜和铜合金.结构支架用带材 |
(Copper and copper alloys - Strip for lead frames; German version EN 1758:1997) |
| DIN EN 1759-1-2005 |
法兰及其连接件.等级标示的管、阀、配件和附件用圆形法兰.第1部分:钢法兰.NPS 1/2至24 |
|
| DIN EN 1759-3-2004 |
法兰及其接头.等级标示的管、阀、配件和附件用圆形法兰.第3部分:铜合金法兰 |
|
| DIN EN 176-1992 |
低吸水性E≤3%的干挤压成形的瓷砖和板.BI组 |
(Dust-pressed ceramic tiles with a low water absorption E3 % (group BI); german version EN 176:1991) |
| DIN EN 1760-1-1997 |
机器的安全性.压敏保护装置.第1部分:压敏按钮开关垫和压敏按钮开关板的设计和检验用指导原则 |
(Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensing mats and pressure sensitive floors; German version EN 1760-1:1997) |
| DIN EN 1760-2-2001 |
机械安全.压敏保护装置.第2部分:压敏边缘和压敏条的试验和设计的一般规则 |
(Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars; German version EN 1760-2:2001) |
| DIN EN 1760-3-2004 |
机器的安全性.压敏保护装置.第3部分:压敏减震器、压敏板、压敏线和类似设备的设计和试验的一般准则 |
|
| DIN EN 1761-1999 |
罐车用橡胶软管和橡胶软管管道.规范 |
(Rubber hoses and hose assemblies for fuel truck delivery - Specification; German version EN 1761:1999) |
| DIN EN 1762-1997 |
25巴(2,5MPA)以下液化气(LPG)(液体和气体)以及天然气用橡胶软管和橡胶软管管道 |
(Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase) and natural gas up to 25 bar (2,5 MPa) - Specification; German version EN 1762:1997) |
| DIN EN 1762-2004 |
25巴(2.5MPA)及以下液化石油气、LPG(液相和气相)和天然气用橡胶软管和软管组件.规范 |
|
| DIN EN 1763-1-2001 |
蒸气态商用丙烷、丁烷及其混合物用橡胶和塑料管、软管和配件.第1部分:橡胶和塑料管和软管的要求 |
(Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixture in the vapour phase - Part 1: Requirements for rubber and plastics tubing and hoses; German version EN 1763-1:2000) |
| DIN EN 1765-1997 |
油的吸入和排放设备用橡胶软管配件 |
(Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies; German version EN 1765:1997) |
| DIN EN 1765-2005 |
油的吸放设备用橡胶软管组件.组件规范 |
|
| DIN EN 1766-2000 |
混凝土结构防护和修理用产品和系统.试验方法.试验参考混凝土.德文版本EN1766:2000 |
(Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing; German version EN 1766:2000) |
| DIN EN 1767-1999 |
混凝土支承结构的维修用产品和系统.检验方法.红外线分析 |
(Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis; German version EN 1767:1999) |
| DIN EN 177-1991 |
吸水量3% |
(Dust-pressed ceramic tiles with water absorption of 3 %E6 %; group BIIa; german version EN 177:1991) |
| DIN EN 1770-1998 |
混凝土支撑结构防护和维修用的产品和系统.试验方法.热膨胀系数的测定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion; German version EN 1770:1998) |
| DIN EN 1771-2004 |
混凝土结构的保护和修复用产品和系统.试验方法.使用沙柱试验测定可注入性 |
|
| DIN EN 1772-2000 |
表面活性剂.通过浸水测定润湿力 |
(Surface active agents - Determination of wetting power by immersion (ISO 8022:1990, modified); German version EN 1772:2000) |
| DIN EN 1773-1997 |
纺织物.织物平面结构.宽度和长度测定 |
(Textiles - Fabrics - Determination of width and length; German version EN 1773:1996) |
| DIN EN 1774-1997 |
锌和锌合金.铸造厂用合金.铸块和液体 |
(Zinc and zinc alloys - Alloys for foundry purposes - Ingot and liquid; German version EN 1774:1997) |
| DIN EN 1775-2001 |
供气.建筑物用煤气管道工程.最大允许工作压力≤5巴.功能推荐 |
(Gas supply - Gas pipework for buildings - Maximum operating pressure5 bar; Functional recommendations (includes Amendment A1:2000 and Amendment A2:2000); German version EN 1775:1998 + A1:2000 + A2:2000) |
| DIN EN 1776-1999 |
煤气供气系统.天然气测量站.要求 |
(Gas supply systems - Natural gas measuring stations - Functional requirements; German version EN 1776:1998) |
| DIN EN 1777-2005 |
消防和救援设备用液压平台.安全要求和检验 |
|
| DIN EN 1778-1999 |
焊接热塑结构的特性值.热塑性设备设计用允许应力和模数的测定 |
(Characteristic values for welded thermoplastic constructions - Determination of allowable stresses and moduli for design of thermoplastic equipment; German version EN 1778:1999) |
| DIN EN 1779 Berichtigung 1-2005 |
对DIN EN 1779-1999的勘误 |
|
| DIN EN 1779-1999 |
无损检验.泄漏检验.选择检验方法和检验程序的标准 |
(Non-destructive testing - Leak testing - Criteria for the method and technique selection; German version EN 1779:1999) |
| DIN EN 178-1991 |
吸水量6% |
(Dust-pressed ceramic tiles with water absorption of 6 %E10 %; group BIIb; german version EN 178:1991) |
| DIN EN 1780-1-2003 |
铝和铝合金.合金化的铝锭、预合金及铸件的命名.第1部分:数字命名系统 |
(Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system; German version EN 1780-1:2002) |
| DIN EN 1780-2-2003 |
铝和铝合金.合金化的铝锭、预合金及铸件的命名.第2部分:以化学符号为基础的命名系统 |
(Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system; German version EN 1780-2:2002) |
| DIN EN 1780-3-2003 |
铝和铝合金.合金化的铝锭、预合金及铸件的命名.第3部分:化学成份的书写规则 |
(Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 3: Writing rules for chemical composition; German version EN 1780-3:2002) |
| DIN EN 1782-1998 |
气管和连接件 |
(Tracheal tubes and connectors; German version EN 1782:1998) |
| DIN EN 1783-2003 |
火柴.性能要求、安全和分类 |
(Matches - Performance requirements, safety and classification (including Amendment A1:2002); German version EN 1783:1997 + A1:2002) |
| DIN EN 1784-1997 |
食品.经过辐射含脂肪的食品的验证.碳氢化合物的气相色谱研究 |
(Foodstuffs - Detection of irradiated food containing fat - Gas chromatographic analysis of hydrocarbons; German version EN 1784:1996) |
| DIN EN 1785-1997 |
食品.经过辐射含脂肪的食品的验证.2烷基环丁酮的气相色谱/质谱分析研究 |
(Foodstuffs - Detection of irradiated food containing fat - Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones; German version EN 1785:1996) |
| DIN EN 1786-1997 |
食品.经过辐射含骨刺的食品的验证.用ESR分光术的方法 |
(Foodstuffs - Detection of irradiated food containing bone - Method by ESR spectroscopy; German version EN 1786:1996) |
| DIN EN 1787-2000 |
食品.用ESR分光光度法检测经过辐射的含纤维素食品 |
(Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy; German version EN 1787:2000) |
| DIN EN 1788-2002 |
食品.能与硅酸盐矿物绝缘的经过辐照的食品的热致发光法检测 |
(Foodstuffs - Thermoluminescence detection of irradiated food from which silicate minerals can be isolated; German version EN 1788:2001) |
| DIN EN 1789-2003 |
医疗车辆及其设备.道路救护车 |
(Medical vehicles and their equipment - Road ambulances (includes Amendment A1:2003); German version EN 1789:1999 + A1:2003) |
| DIN EN 179-2002 |
建筑硬件.用工具柄或推焊接点操作紧急出口装置.要求和试验方法 |
(Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods (includes Amendment A1:2001); German version EN 179:1997 + A1:2001) |
| DIN EN 1790-1998 |
道路标识材料.预制道路标识 |
(Road marking materials -Performed road markings; German version EN 1790:1998) |
| DIN EN 1791-1997 |
表面活性剂.脂族烷基二甲胺化氧.氧化胺含量测定 |
(Surface active agents - Fatty alkyl dimethyl amine oxides - Determination of the amine oxide content; German version EN 1791:1997) |
| DIN EN 1792-2003 |
焊接.焊接和相关工艺用多语种术语列表 |
(Welding - Multilingual list of terms for welding and related processes; Trilingual version EN 1792:2003) |
| DIN EN 1793-1-1997 |
交通车辆的消音设备.测定听觉功能的试验方法.第1部分:声音吸收的基本特性 |
(Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption; German version EN 1793-1:1997) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com