标准号 |
中文名称 |
英文名称 |
| DIN EN ISO 8067-1995 |
软质泡沫聚合材料.抗撕裂强度的测定 |
Flexible cellular polymeric materials - Determination of tear strength (ISO 8067:1989); German version EN ISO 8067:1995 |
| DIN EN ISO 8092-1-1998 |
道路车辆.电车上用网络的插接连接.第1部分:单极插接连接用扁形插头.尺寸和特殊要求 |
Road vehicles - Connections for on-board electrical wiring harnesses - Part 1: Tabs for single-pole connections - Dimensions and specific requirements (ISO 8092-1:1996); German version EN ISO 8092-1:1998 |
| DIN EN ISO 8092-2-1998 |
道路车辆.电车上用网络的插接连接.第2部分:定义,检验和一般要求 |
Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements (ISO 8092-2:1996); German version EN ISO 8092-2:1998 |
| DIN EN ISO 8092-2-2003 |
道路车辆.车载电线束的连接.第2部分:定义、试验方法和一般性能要求 |
(Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements (ISO 8092-2:2000); German version EN ISO 8092-2:2001) |
| DIN EN ISO 8092-3-1999 |
道路车辆.电子线路板的成组配线装置.第3部分:多极连接的标记,尺寸和特殊要求 |
Road vehicle - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections, dimensions and specific requirements (ISO 8092-3:1996); German version EN ISO 8092-3:1999 |
| DIN EN ISO 8092-4-1999 |
道路车辆.电子线路板的成组配线装置.第4部分:单极和多极连接器用销钉.尺寸和特殊要求 |
Road vehicles - Connections for on-board electrical wiring harnesses - Part 4: Pins for single and multi-pole connections, dimensions and specific requirements (ISO 8092-4:1997); German version EN ISO 8092-4:1999 |
| DIN EN ISO 8099-2001 |
小型船舶.卫生间废弃物积集系统 |
Small craft - Toilet waste retention systems (ISO 8099:2000); German version EN ISO 8099:2000 |
| DIN EN ISO 8106-2005 |
玻璃容器.用重量法测定容量.试验方法 |
|
| DIN EN ISO 8113-2004 |
玻璃容器.耐垂直负载.试验方法 |
|
| DIN EN ISO 8130-14-2004 |
粉末涂料.第14部分:术语 |
|
| DIN EN ISO 8130-9-1999 |
涂层用粉.第9部分:取样 |
Coating powders - Part 9: Sampling (ISO 8130-9:1992); German version EN ISO 8130-9:1999 |
| DIN EN ISO 81714-1-2000 |
用于产品技术文献的图形符号的设计.第1部分:基本规则 |
Design of graphical symbols for use in the technical documentation of products - Part 1: Basic rules (ISO 81714-1:1999); German version EN ISO 81714-1:1999 |
| DIN EN ISO 8178-1-1996 |
往复式内燃机.排气污染测定.第1部分:气体和颗粒物质排放污染的试验台测定法 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions (ISO 8178-1:1996); German version EN ISO 8178-1:1996 |
| DIN EN ISO 8178-2-1996 |
往复式内燃机.排气污染测定.第2部分:气体和颗粒物质排放污染的定点测量 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site (ISO 8178-2:1996); German version EN ISO 8178-2:1996 |
| DIN EN ISO 8178-4-1996 |
往复式内燃机.排气污染测定.第4部分:不同发动机应用的试验周期 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Test cycles for different engine applications (ISO 8178-4:1996); German version EN ISO 8178-4:1996 |
| DIN EN ISO 8178-5-1999 |
往复式内燃机.排气污染测定.第5部分:燃料试验 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels (ISO 8178-5:1997); German version EN ISO 8178-5:1997 |
| DIN EN ISO 8178-6-2001 |
往复式内燃机.废气排放测定.第6部分:测量结果和试验的报告 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test (ISO 8178-6:2000); German version EN ISO 8178-6:2000 |
| DIN EN ISO 8185 Berichtigung 1-2002 |
DIN EN ISO 8185:1998-02 (EN ISO 8185:1997/AC:2002) 勘误 |
Corrigenda to DIN EN ISO 8185:1998-02 (EN ISO 8185:1997/AC:2002) |
| DIN EN ISO 8185-1998 |
医用湿润器.湿润系统的一般要求 |
Humidifiers for medical use - General requirements for humidification systems (ISO 8185:1997); German version EN ISO 8185:1997 |
| DIN EN ISO 8192-1995 |
水的质量.用活化的污泥抑制氧消耗量的试验 |
Water quality - Test for inhibition of oxygen consumption by activated sludge (ISO 8192:1986); German version EN ISO 8192:1995 |
| DIN EN ISO 8205-1-1997 |
电阻焊接水冷次级线圈连接电缆.第1部分:双导体连接电缆的尺寸和要求 |
Water-cooled secondary connection cables for resistance welding - Part 1: Dimensions and requirements for double-conductor connection cables (ISO 8205-1:1993); German version EN ISO 8205-1:1996 |
| DIN EN ISO 8205-1-2003 |
电阻焊接水冷次级线圈连接电缆.第1部分:双导体连接电缆的尺寸和要求 |
(Water-cooled secondary connection cables for resistance welding - Part 1: Dimensions and requirements for double-conductor connection cables (ISO 8205-1:2002); German version EN ISO 8205-1:2002) |
| DIN EN ISO 8205-2-2003 |
电阻焊用水冷却二次连接电缆.第2部分:单导体连接电缆的尺寸和要求 |
Water-cooled secondary connection cables for resistance welding - Part 2: Dimensions and requirements for single-conductor connection cables (ISO 8205-2:2002); German version EN ISO 8205-2:2002 |
| DIN EN ISO 8205-3-1997 |
电阻焊用水冷二次连接电缆.第3部分:检验要求 |
Water-cooled secondary connection cables for resistance welding - Part 3: Test requirements (ISO 8205-3:1993); German version EN ISO 8205-3:1996 |
| DIN EN ISO 8222-2003 |
石油测量系统.校准.容积验证箱校准时的温度更正 |
Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks (ISO 8222:2002); German version EN ISO 8222:2002 |
| DIN EN ISO 8224-1-2003 |
移动式灌溉机械.第1部分:操作特征及实验室与田间试验法 |
(Traveller irrigation machines - Part 1: Operational characteristics, laboratory and field test methods (ISO 8224-1:2003); German version EN ISO 8224-1:2003) |
| DIN EN ISO 8230-1998 |
用全氯乙烯的纺织物净化设备的安全要求 |
Safety requirements for dry-cleaning machines using perchloroethylene (ISO 8230:1997); German version EN ISO 8230:1997 |
| DIN EN ISO 8249-2000 |
焊接.奥氏体和双重铁素体-奥氏体铬镍(Cr-Ni)不锈钢焊接金属中铁素体数(FN)的测定 |
Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2000); German version EN ISO 8249:2000 |
| DIN EN ISO 8253-3-1998 |
声学.听力测试方法.第3部分:语言测听术 |
Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO 8253-3:1996); German version EN ISO 8253-3:1998 |
| DIN EN ISO 8254-1-2003 |
纸和纸板.光泽度的测量.第1部分:用聚光束的75度,TAPPI法 |
Paper and board - Measurement of specular gloss - Part 1: 75?gloss with a converging beam, TAPPI method (ISO 8254-1:1999); German version EN ISO 8254-1:2003 |
| DIN EN ISO 8254-2-2003 |
纸和纸板.光泽度的测量.第2部分:用平行束的75度,DIN法 |
Paper and board - Measurement of specular gloss - Part 2: 75?gloss with a parallel beam, DIN method (ISO 8254-2:2003); German version EN ISO 8254-2:2003 |
| DIN EN ISO 8256-1997 |
塑料.冲击拉伸强度测定 |
Plastics - Determination of tensile-impact strength (ISO 8256:1990, including Technical Corrigendum 1:1991); German version EN ISO 8256:1996 |
| DIN EN ISO 8256-2005 |
塑料.拉伸冲击强度测定 |
|
| DIN EN ISO 8261-2001 |
牛奶和乳制品.微生物检测用试验样品、初始悬浮物和十倍稀释物的制备 |
Milk and milk products - General guidance for the preparation of test samples, initial suspensions and decimal dilutions for microbiological examination (ISO 8261:2001); German version EN ISO 8261:2001 |
| DIN EN ISO 8282-1997 |
牙医设备.汞合金制作用的汞和合金的混合器以及配量器 |
Dental equipment - Mercury and alloy mixers and dispensers (ISO 8282:1994); German version EN ISO 8282:1997 |
| DIN EN ISO 8289-2001 |
釉瓷和搪瓷.检测和确定缺陷位置的低电压试验 |
Vitreous and porcelain enamels - Low voltage test for detecting and locating defects (ISO 8289:2000); German version EN ISO 8289:2001 |
| DIN EN ISO 8290-1998 |
釉瓷和搪瓷.室温下抗硫酸的测定 |
Vitreous and porcelain enamels - Determination of resistance to sulfuric acid at room temperature (ISO 8290:1998); German version EN ISO 8290:1998 |
| DIN EN ISO 8292-1995 |
动植物脂肪和油.固态脂肪含量的测定.脉冲核磁共振法 |
Animal and vegetable fats and oils - Determination of solid fat content - Pulsed nuclear magnetic resonance method (ISO 8292:1991); German version EN ISO 8292:1995 |
| DIN EN ISO 8294-1999 |
动植物的脂肪和油.铜、铁和镍含量的测定.石墨熔炉原子吸收法 |
Animal and vegetable fats and oils - Determination of copper, iron and nickel contents - Graphite furnace atomic absorption method (ISO 8294:1994); German version EN ISO 8294:1999 |
| DIN EN ISO 8295-2004 |
塑料.薄膜和薄板.摩擦系数的测定 |
|
| DIN EN ISO 8307-1998 |
软泡沫塑料聚合材料.回跳弹性的测定 |
Flexible cellular polymeric materials - Determination of resilience (ISO 8307:1990); German version EN ISO 8307:1997 |
| DIN EN ISO 8308-1996 |
带和不带填料的橡胶和塑料软管及管系.软管和管壁的透液量的测定 |
Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:1993); German version EN ISO 8308:1995 |
| DIN EN ISO 8311-1996 |
轻质碳氢化合物制冷液.船上薄膜式罐和柱型罐的标定.物理测量法 |
Refrigerated light hydrocarbon fluids - Calibration of membrane tanks and independent prismatic tanks in ships - Physical measurement (ISO 8311:1989); German version EN ISO 8311:1995 |
| DIN EN ISO 8316-1995 |
封闭管道内液体流量的测量.容积测量箱的液体收集法 |
Measurement of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank (ISO 8316:1987); German version EN ISO 8316:1995 |
| DIN EN ISO 8317 Berichtigung 1-2005 |
防儿童拆开的包装.可再次包装件的要求和试验程序 |
|
| DIN EN ISO 8317-2004 |
防儿童拆开的包装.可再次包装的要求和试验程序 |
|
| DIN EN ISO 8318-2002 |
包装.完满运输包装和成组装运.采用可变频的正弦振动试验 |
Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency (ISO 8318:2000); German version EN ISO 8318:2002 |
| DIN EN ISO 8320-1-2004 |
接触镜片和接触镜片护理产品.词汇.第2部分:接触镜片 |
(Contact lenses and contact lens care products - Vocabulary - Part 1: Contact lenses (ISO 8320-1:2003); German version EN ISO 8320-1:2003) |
| DIN EN ISO 8320-1-2004 |
接触镜片和接触镜片护理产品.词汇.第2部分:接触镜片 |
|
| DIN EN ISO 8320-2-2001 |
接触镜片和接触镜片护理产品.词汇.第2部分:接触镜片护理产品 |
Contact lenses and contact lens care products - Vocabulary - Part 2: Contact lens care products (ISO 8320-2:2001); German version EN ISO 8320-2:2001 |
| DIN EN ISO 8321-1-2003 |
眼科光学.接触透镜的材料、光学和尺寸性能规范.第1部分:刚性角膜接触透镜和巩膜接触透镜 |
Ophthalmic optics - Specifications for material, optical and dimensional properties of contact lenses - Part 1: Rigid corneal and scleral contact lenses (ISO 8321-1:2002); German version EN ISO 8321-1:2002 |
| DIN EN ISO 8321-2-2000 |
光学和光学仪器.接触透境材料,光学特性和尺寸特性规范.第2部分:单视水晶透镜 |
Ophthalmic optics - Specifications for material, optical and dimensional properties of contact lenses - Part 2: Single-vision hydrogel lenses (ISO 8321-2:2000); German version EN ISO 8321-2:2000 |
| DIN EN ISO 8325-2004 |
牙医学.旋转仪器的试验方法 |
|
| DIN EN ISO 8330-2000 |
橡胶和塑料软管和软管组件.词汇表 |
Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:1998); German version EN ISO 8330:2000 |
| DIN EN ISO 8351-1-1996 |
包装.袋包装规格方法.第1部分:纸袋 |
Packaging - Method of specification for sacks - Part 1: Paper sacks (ISO 8351-1:1994); German version EN ISO 8351-1:1996 |
| DIN EN ISO 8351-2-1996 |
包装.袋包装规格方法.第2部分:热塑软薄膜制成的包装袋 |
Packaging - Method of specification for sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8351-2:1994); German version EN ISO 8351-2:1996 |
| DIN EN ISO 8359-1997 |
医用氧气浓缩器.安全要求 |
Oxygen concentrators for medical use - Safety requirements (ISO 8359:1996); German version EN ISO 8359:1996 |
| DIN EN ISO 8362-1-2004 |
注射容器及附件.第1部分:玻璃管注射瓶 |
|
| DIN EN ISO 8362-4-2004 |
注射容器及附件.第4部分:模制玻璃注射瓶 |
|
| DIN EN ISO 8367-1-1996 |
包装.一般用途袋子的尺寸公差.第1部分:纸袋 |
Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks (ISO 8367-1:1993); German version EN ISO 8367-1:1996 |
| DIN EN ISO 8367-2-1996 |
包装.一般用途袋子的尺寸公差.第2部分:热塑塑料薄膜袋 |
Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8367-2:1993); German version EN ISO 8367-2:1996 |
| DIN EN ISO 8373-1996 |
操作工业机器人.词汇 |
Manipulating industrial robots - Vocabulary (ISO 8373:1994); German version EN ISO 8373:1996 |
| DIN EN ISO 8381-2000 |
以奶为基料的婴儿食品.脂肪含量的测定.重量分析法(参照法) |
Milk-based infant foods - Determination of fat content - Gravimetric method (Reference method) (ISO 8381:2000); German version EN ISO 8381:2000 |
| DIN EN ISO 8384-2001 |
船和航运技术.挖泥船.词汇 |
Ships and marine technology - Dredgers - Vocabulary (ISO 8384:2000); Trilingual version EN ISO 8384:2001 |
| DIN EN ISO 8385-2000 |
船和海船术语.挖泥船.分类 |
Ships and marine technology - Dredgers - Classification (ISO 8385:1999); German version EN ISO 8385:1999 |
| DIN EN ISO 8401-1995 |
金属镀层.延展性的测量方法述评 |
Metallic coatings - Review of methods of measurement of ductility (ISO 8401:1986); German version EN ISO 8401:1994 |
| DIN EN ISO 8420-2002 |
动植物脂肪和油.极性化合物含量测定 |
Animal and vegetable fats and oils - Determination of content of polar compounds (ISO 8420:2002); German version EN ISO 8420:2002 |
| DIN EN ISO 8429-1996 |
光学和光学仪器.眼科学.分度盘刻度 |
Optics and optical instruments - Ophthalmology - Graduated dial scale (ISO 8429:1986); German version EN ISO 8429:1996 |
| DIN EN ISO 8434-1-1997 |
液压传动和一般用金属导管连接件.第1部分:24度喇叭形压合接头 |
Metallic tube connections for fluid power and general use - Part 1: 24?compression fittings (ISO 8434-1:1994); German version EN ISO 8434-1:1997 |
| DIN EN ISO 8434-4-2000 |
液压及通用金属管件连接.第4部分:以O形密封圈焊接于接头上的24度圆锥体连接件 |
Metallic tube connections for fluid power and general use - Part 4: 24?cone connectors with O-ring weld-on nipples (ISO 8434-4:1995); German version EN ISO 8434-4:2000 |
| DIN EN ISO 8442-1-1998 |
和食品接触的材料及物品.刀具和餐桌器具.第1部分:准备餐食用刀具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 1: Requirements for cutlery for the preparation of food (ISO 8442-1:1997); German version EN ISO 8442-1:1997 |
| DIN EN ISO 8442-2-1998 |
和食品接触的材料及物品.刀具和餐桌器具.第2部分:镀银和不锈钢餐具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 2: Requirements for stainless steel and silver-plated cutlery (ISO 8442-2:1997); German version EN ISO 8442-2:1997 |
| DIN EN ISO 8442-3-1998 |
与食品接触的材料和物品.刀具和餐桌器皿.第3部分:镀银餐桌器皿和装饰凹型器皿 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 3: Requirements for silver-plated table and decorative holloware (ISO 8442-3:1997); German version EN ISO 8442-3:1997 |
| DIN EN ISO 8442-4-1998 |
和食品接触的材料及物品.刀具和餐桌器具.第4部分:镀金餐具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 4: Requirements for gold plated cutlery (ISO 8442-4:1997); German version EN ISO 8442-4:1997 |
| DIN EN ISO 8442-6-2001 |
与食品接触的材料和物品.刀叉餐具和凹型餐具.第6部分:薄镀银的由清漆保护的餐桌凹形餐具 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 6: Lightly silver plated table holloware protected by lacquer (ISO 8442-6:2000); German version EN ISO 8442-6:2000 |
| DIN EN ISO 8442-7-2001 |
与食品接触的材料和物品.刀叉餐具和凹形餐具.第7部分:由银、其他贵金属及其合金制成的刀叉餐具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7: Requirements for table cutlery made of silver, other precious metals and their alloys (ISO 8442-7:2000); German version EN ISO 8442-7:2000 |
| DIN EN ISO 8442-8-2001 |
与食品接触的材料和物品.刀叉餐具和凹形餐具.第8部分:银制餐桌餐具和装饰性凹形餐具的要求 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 8: Requirements for silver table and decorative holloware (ISO 8442-8:2000); German version EN ISO 8442-8:2000 |
| DIN EN ISO 845-1995 |
泡沫橡胶和塑料.表观密度的测定 |
Cellular plastics and rubbers - Determination of apparent (bulk) density (ISO 845:1988); German version EN ISO 845:1995 |
| DIN EN ISO 846-1997 |
塑料.微生物作用的评价 |
Plastics - Evaluation of the action of microorganisms (ISO 846:1997); German version EN ISO 846:1997 |
| DIN EN ISO 8467-1995 |
水质.高锰酸盐指数的测定 |
Water quality - Determination of permanganate index (ISO 8467:1993); German version EN ISO 8467:1995 |
| DIN EN ISO 8469 Berichtigung 1-2001 |
DIN EN ISO 8469-1995的勘误 |
Corrigendum to DIN EN ISO 8469:1995 (German version EN ISO 8469:1995/A1:2000) |
| DIN EN ISO 8469-1995 |
小艇.不耐火的燃料软管 |
Small craft - Non-fire-resistant fuel hoses (ISO 8469:1994); German version EN ISO 8469:1995 |
| DIN EN ISO 8491-2004 |
金属材料.管(全截面).弯曲试验 |
|
| DIN EN ISO 8492-2004 |
金属材料.管.压扁试验 |
|
| DIN EN ISO 8493-2004 |
金属材料.管.扩口试验 |
|
| DIN EN ISO 8494-2004 |
金属材料.管.卷边试验 |
|
| DIN EN ISO 8495-2004 |
金属材料.管.环形扩口试验 |
|
| DIN EN ISO 8496-2004 |
金属材料.管.环形拉伸试验 |
|
| DIN EN ISO 8497-1996 |
绝热.管道用绝热稳定状态中热传输性能测定 |
Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes (ISO 8497:1994); German version EN ISO 8497:1996 |
| DIN EN ISO 8501-1 Bb.1-2002 |
涂料和有关产品使用之前钢衬底的预处理.表面清洁度的目视评定.对第1部分的信息性补充:不同磨料喷射清理所致钢材表观改变的典型样板照片(ISO 8501-1:1988/补充:1994) |
|
| DIN EN ISO 8501-1-2002 |
涂料和有关产品使用之前钢衬底的预处理.表面清洁度的目视评定.第1部分:未涂装的钢材和全面清除原有涂层后的钢材的锈蚀等级和除锈等级(ISO 8501-1:1988) |
|
| DIN EN ISO 8501-2-2002 |
涂料和有关产品使用前钢衬底的制备.表面清洁度的视觉评价.第2部分:已有覆层局部除去后已涂覆钢衬底的制备等级 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings (ISO 8501-2:1994); |
| DIN EN ISO 8502-2-1999 |
涂层材料使用前的钢料表面的清理准备.表面清洁度的检验.第2部分:已清洁的表面上氯化物的实验室测定 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:1992); German version EN ISO 8502-2:1999 |
| DIN EN ISO 8502-3-1999 |
涂层材料使用前的钢料表面的清理准备.表面清洁度评定的检验.第3部分:为涂层作准备的钢表面上灰尘的评定(粘合带法) |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:1992); Ge |
| DIN EN ISO 8502-4-1999 |
涂层材料使用前的钢料表面的清理准备.表面清洁度评定的检验.第4部分:涂层前出现露水可能性的评估指南 |
|
| DIN EN ISO 8502-6-1999 |
涂层材料使用前的钢料表面的清理准备.表面清洁度评定的检验.第6部分:分析用可溶于水的杂质的萃取,布雷斯勒法(Bresle) |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis; the Bresle method (ISO 8502-6:1995); German version EN ISO 8502- |
| DIN EN ISO 8502-9-2001 |
涂料和有关产品使用前钢衬底的制备.表面清洁度评定试验.第9部分:水溶性盐热导测定的现场方法 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998); German version EN ISO |
| DIN EN ISO 8503-1-1995 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第1部分:喷砂处理表面的 ISO评定比较样板的规范和定义 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra |
| DIN EN ISO 8503-2-1995 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第2部分:喷砂处理表面的定级方法.比较方 |
(Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel; comparator proced |
| DIN EN ISO 8503-3-1995 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第3部分:ISO表面轮廓比较仪的校准方法和 |
(Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of s |
| DIN EN ISO 8503-4-1995 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第4部分:ISO表面轮廓比较仪的校准方法和 |
(Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of s |
| DIN EN ISO 8504-1-2002 |
涂料和有关产品使用前钢衬底的制备.表面制备方法.第1部分:总则 |
(Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000); German version EN ISO 8504-1:2001) |
| DIN EN ISO 8504-2-2002 |
涂料和有关产品使用前钢衬底的制备.表面制备方法.第2部分:喷砂清理 |
(Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000); German version EN ISO 8504-2:2001) |
| DIN EN ISO 8504-3-2002 |
涂料和有关产品使用前钢衬底的制备.表面制备方法.第3部分:手工工具和电动工具清洗 |
(Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:1993); German version EN ISO 8504-3:2001) |
| DIN EN ISO 8536-1-2004 |
医用输液设备.第1部分:输液玻璃瓶 |
|
| DIN EN ISO 8536-2 Berichtigung 1-2005 |
医用输液设备.第2部分:输液瓶塞.DIN EN ISO 8536-2-2003的勘误 |
|
| DIN EN ISO 8536-2-2003 |
医用输液设备.第2部分:输液瓶塞 |
Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2001); German version EN ISO 8536-2:2002, German and English texts |
| DIN EN ISO 8536-8-2005 |
医用输液器具.第8部分:有压力输液仪的输液器具 |
|
| DIN EN ISO 8537-2001 |
胰导素注射用的有或无针头的灭菌一次性使用注射器. |
Sterile single-use syringes, with or without needle, for insulin (ISO 8537:1991) (including Amendment AMD 1:2000); German version EN ISO 8537:1994 + A1:2000 |
| DIN EN ISO 8561-1996 |
家用无霜制冷设备.强制循环冷却的冰箱,制冷机,冷冻机和低温制冷机.性能和测试方法 |
Household frost-free refrigerating appliances - Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by internal forced air circulation - Characteristics and test methods (ISO 8561:1995); German version EN ISO 8561:1 |
| DIN EN ISO 8561/A1-1998 |
家用无霜制冷设备.制冷机,制冷机冷藏柜,冷冻食品储藏柜和用内压力空气循环冷却的食品冷藏柜特性和试验方法.补充件1:强易腐蚀品防腐用特殊冷冻箱 |
|
| DIN EN ISO 8565-1995 |
金属和合金.大气腐蚀试验.野外试验的一般要求 |
Metals and alloys - Atmospheric corrosion testing - General requirements for field tests (ISO 8565:1992); German version EN ISO 8565-1995 |
| DIN EN ISO 8580-1995 |
橡胶和塑料软管.稳定状态下抗紫外线的测定 |
(Rubber and plastics hoses - Determination of ultra-violet resistance under static conditions (ISO 8580:1987); German version EN ISO 8580:1995) |
| DIN EN ISO 8596-1996 |
眼科光学.视力检验.标准视力符号及其演示 |
(Ophthalmic optics - Visual acuity testing - Standard optotype and its presentation (ISO 8596:1994); German version EN ISO 8596:1996) |
| DIN EN ISO 8597-1996 |
眼科光学.视力检验.视力符号相关连接方法 |
(Optics and optical instruments - Visual acuity testing - Method of correlating optotypes (ISO 8597:1994, including Technical Corrigendum 1:1995); German version EN ISO 8597:1996) |
| DIN EN ISO 8598-1998 |
光学和光学仪器.焦距计 |
(Optics and optical instruments - Focimeters (ISO 8598:1996); Deutsche Fassung EN ISO 8598:1998) |
| DIN EN ISO 8599-1997 |
光学和光学仪器.接触镜片.光谱透射率和光透射率的测定 |
Optics and optical instruments - Contact lenses - Determination of the spectral and luminous transmittance (ISO 8599:1994); German version EN ISO 8599:1996 |
| DIN EN ISO 8611-1-2004 |
物料搬运用托盘.平托盘.第1部分:试验方法 |
|
| DIN EN ISO 8612-2001 |
眼科装置.眼压计 |
Ophthalmic instruments - Tonometers (ISO 8612:2001); German version EN ISO 8612:2001 |
| DIN EN ISO 8618-1998 |
塑料.液态酚醛树脂.非挥发性物质的常规测定 |
Plastics - Liquid phenolic resins - Conventional determination of non-volatile matter (ISO 8618:1995); German version EN ISO 8618:1998 |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com