标准号 |
中文名称 |
英文名称 |
| DIN 21914-1-1994 |
矿山测量平面图.钻孔和孔洞.第1部分:钻孔 |
(Mine plans - Drilling and cavern - Part 1: Drilling) |
| DIN 21914-1-2005 |
矿区平面图.钻探和孔洞.第1部分:钻探 |
|
| DIN 21914-2-1999 |
矿山测量平面图.钻孔和孔洞.第1部分:钻孔 |
(Mine plans - Drilling and cavern - Part 2: Brine caverns) |
| DIN 21916-1-1993 |
矿山测量平面图.作业安全性.矿井通风 |
(Mine plans; operational safety; ventilation system) |
| DIN 21916-2-1992 |
矿山测量平面图.作业安全性.地面防火 |
(Mine plans; operational safety; fire prevention on the surface) |
| DIN 21916-2/A1-2001 |
矿山测量平面图.作业安全性.第2部分:地面防火.修改件A1 |
(Mine plans - Operational safety - Part 2: Fire prevention on the surface; Amendment A1) |
| DIN 21916-3-1993 |
矿山测量平面图.作业安全性.井下防火 |
(Mine plans; operational safety; fire prevention under the surface) |
| DIN 21917-1999 |
矿山测量平面图.地层和地面运动 |
(Mine plans - Strata and ground movements) |
| DIN 21917-2-2002 |
矿山测量平面图.地层和地面运动.第2部分:地球力学测量点 |
(Mine plans - Strata and ground movements - Part 2: Geomechanical measuring points) |
| DIN 21918-1-1999 |
矿山.测量平面图.矿层.第1部分:概念,划分 |
(Mine plans - Mineral deposits - Part 1: Terms, classification) |
| DIN 21918-2-2004 |
矿山测量平面图.矿床.第2部分:厚度 |
|
| DIN 21919-1-2000 |
矿山平面图.地层学.第1部分:总分类 |
(Mine plans - Stratigraphy - Teil 1: General classification) |
| DIN 21919-2-2000 |
矿山平面图.地层学.第2部分:区域和局部的划分.无烟煤 |
(Mine plans - Stratigraphy - Part 2: Regional and local subdivisions; hard coal) |
| DIN 21919-3-2001 |
矿山测量平面图.第3部分:区域和地区分级.褐煤 |
Mine plans - Stratigraphy - Part 3: Regional and local subdivisions; Lignite |
| DIN 21920-1-1988 |
矿山测量平面图.岩相学.一般通用的符号.沉积物 |
(Mine plans; petrography; generally applicable symbols; sediments) |
| DIN 21920-2-1996 |
矿山测量平面图.岩相学.第2部分:岩浆岩 |
Mine plans - Petrography - Part 2: Magmatites |
| DIN 21920-3-1996 |
矿山测量平面图.岩相学.第3部分:岩石变质和其它岩石变化. |
Mine plans - Petrography - Part 3: Metamorphic and other lithogenetic phenomena |
| DIN 21920-4-1996 |
矿山测量平面图.岩相学.第4部分:矿物 |
Mine plans - Petrography - Part 4: Minerals |
| DIN 21920-5-1994 |
矿山测量平面图.岩相学.第5部分:煤矿 |
Mine plans - Petrography - Part 5: Hard coal mining |
| DIN 21920-7-1996 |
矿山测量平面图.岩相学.第7部分:钾盐矿和岩盐矿 |
Mine plans - Petrography - Part 7: Potash and rock salt mining |
| DIN 21921-1996 |
矿山测量平面图.岩层的构造要素和形状说明 |
Mine plans - Tectonic elements and figure of strata |
| DIN 21961-2000 |
矿山测量学.悬式经纬仪用滑套式枢轴和滑动帽.连接尺寸 |
Mine surveying - Slip-on pivots, slip-on caps for suspension theodolites - Connecting dimensions |
| DIN 2197-1998 |
丝锥.高速钢磨齿丝锥的交货技术条件 |
Screwing taps - Technical delivery conditions for grinded high-steel taps |
| DIN 220-1979 |
插入刀片式的套式铰刀 |
(Shell reamers with inserted blades) |
| DIN 22005-1-1997 |
煤矿用原料分析.第1部分:概述 |
(Investigations of raw material in hard-coal-mining - Part 1: Survey) |
| DIN 22005-2-1997 |
煤矿用原料分析.第2部分:原料概念 |
Investigations of the raw material in hard-coal-mining - Part 2: Terms relating to raw material |
| DIN 2201-1992 |
机床.铣刀刀架用铣轴头.内圆锥为莫氏锥度3-6和米制锥度80-200.尺寸 |
(Machine tools; taper shank receptacle with positive drive for morse taper 3 to 6 and metric taper 80 to 200; dimensions) |
| DIN 22011-1993 |
无烟煤矿原料检验.勘探钻屑的处理 |
(Investigations of the raw material in hard-coal-mining; treatment of exploratory drillings) |
| DIN 22012-1994 |
煤矿开采中原材料勘测.煤矿及围岩宏观岩相分类和测定 |
(Investigations of the raw material in hard-coal-mining; macropetrographic classification and topographic survey of hard-coal and host rock) |
| DIN 22013-1985 |
煤矿原材料试验矿槽试样取样及试验大纲 |
(Investigations of the raw material in hard-coal-mining; channel sample; sampling and schema of tests) |
| DIN 22014-1985 |
煤矿原料试验一个回采工作面的采掘物中的原煤试验取出和试验表 |
(Investigations of the raw material in hard-coal mining; raw coal sample from the production of a working area; sampling and schema of tests) |
| DIN 22015-1993 |
煤矿原料检验.覆层岩石的宏观描述和分类 |
(Investigations of the raw material in hardcoal-mining; macroscopic classification and description of overburden rock) |
| DIN 22018-1985 |
煤矿原料试验.用浮沉分析法测定粒度分布 |
(Investigations of the raw material in hard-coal-mining determation of the particle-density-distribution by float-and-sink-analysis) |
| DIN 22019-1-1985 |
煤矿原料试验.测定粒度分布.通过筛分的粒度分布20μm |
(Investigations of the raw material in hard-coal-mining; determination of the particle-size-distribution 20 m by sieve-analysis) |
| DIN 22019-2-1985 |
煤矿原料试验.测定粒度分布.通过超声微筛分析的粒度分布 |
(Investigations of the raw material in hard-coal-mining; determination of the particle-size-distribution 60 m by ultrasonic-microsieve-analysis) |
| DIN 22020-1-1998 |
煤矿原料试验.煤,焦碳和煤块显微检验.第1部分:概念.方法的概述和应用 |
(Investigations of raw material in hard-coal-mining - Microscopical examination of hard coal, coke and briquettes - Part 1: Terms, survey of processes and their applications) |
| DIN 22020-2-1998 |
煤矿的原料试验.煤,焦碳和煤碳和煤块显微试验.第2部分:粉粒研磨片和煤块研磨片的制作 |
(Investigations of raw material in hard-coal-mining - Microscopical examination of hard coal, coke and briquettes - Part 2: Preparation of polished surface from lump material and particulate blocks) |
| DIN 22020-3-1998 |
煤矿的原料试验.煤,焦碳和煤块显微试验.第3部分:粉粒研磨片中煤的岩相组分的分析 |
(Investigations of raw material in hard-coal-mining - Microscopical examination of hard coal, coke and briquettes - Part 3: Maceral analysis on particulated blocks) |
| DIN 22020-4-1998 |
煤矿的原料检验.煤,焦碳和煤块的显微检验.第4部分:粉粒研磨片上的微岩石类型分析 |
(Investigations of raw material in hard-coal-mining - Microscopical examination of hard coal, coke and briquettes - Part 4: Microlithotype analysis on particulate blocks) |
| DIN 22020-5-1986 |
煤矿的原料试验.煤、焦碳和煤块的显微试验.镜煤素质的反射测量 |
(Investigations of the raw material in hard-coal-mining microscopical examinations of hard coal, coke and briquettes; reflectance measurements on vitrinites) |
| DIN 22020-5-2005 |
无烟煤开采中原材料的勘测.无烟煤、焦碳和煤饼的显微检验.第5部分:镜煤的反射系数测量 |
|
| DIN 22021-1985 |
煤矿原料分析试验.为标定工艺性能对矿石进行显微检验分类 |
(Investigations of the raw material in hard-coal-mining; microscopical examinations of rocks) |
| DIN 22022-1-2001 |
固体燃料.痕量素含量的测定.第1部分:抽样和样品制备的一般规则.分析用样品的制备(溶解法) |
(Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation; Preparation of samples for the analyses (dissolution method)) |
| DIN 22022-2-2001 |
固体燃料.痕量素含量的测定.第2部分:ICP-OES |
(Solid fuels - Determination of contents of trace elements - Part 2: ICP-OES) |
| DIN 22022-3-2001 |
固体燃料.痕量素含量的测定.第3部分:AAS火焰法 |
(Solid fuels - Determination of trace elements - Part 3: AAS-flame method) |
| DIN 22022-4-2001 |
固体燃料.痕量素含量的测定.第4部分:无焰氢化系统的原子吸收分光光度测定法或冷却蒸气法 |
(Solid fuels - Determination of contents of trace elements - Part 4: Atomic absorption spectrometry applying the flameless hydride system or the cold-vapour-method) |
| DIN 22022-5-2001 |
固体燃料.痕量素含量的测定.第5部分:电热雾化法的原子吸收分光光度测定法 |
(Solid fuels - Determination of trace elements - Part 5: Atomic absorption spectrometry applying the electrothermal atomization) |
| DIN 22022-6-2001 |
固体燃料试验.痕量素的测定.第6部分:结果的评价和说明 |
(Testing of solid fuels - Determination of trace elements - Part 6: Evaluation and declaration of results) |
| DIN 22024-1989 |
煤矿的原料试验.坚岩石分裂拉力强度的测定 |
(Investigations of the raw material in hard-coal-mining; determination of tensile strength on solid rock) |
| DIN 2207-2001 |
根据DIN2201的铣床轴头刀具柄.配合尺寸 |
(Tool shanks for milling spindle noses according to DIN 2201 - Mating dimensions) |
| DIN 22100-3-1993 |
矿山井下用塑料器材和塑料设备.螺旋筒.安全技术要求.检验.标识 |
(Articles and materials from synthetic for use in underground mines; spiral air ducts; safety requirements, testing, marking) |
| DIN 22100-4-1993 |
矿山井下用塑料器材和塑料设备.扁平空气导管.安全技术要求.检验.标识 |
(Articles and materials from synthetic for use in underground mines; flat air ducts; safety requirements, testing, marking) |
| DIN 22100-5-1993 |
矿山井下用塑料器材和塑料设备.管.管绝缘件和软管.安全技术要求.检验.标识 |
(Articles and materials from synthetic for use in underground mines; tubes, tube isolations and hoses; safety requirements, testing, marking) |
| DIN 22100-6-1993 |
矿山井下用塑料器材和塑料设备.薄膜、涂层和涂层织物.隔板材料和网状背板.安全技术要求.检验.标识 |
(Articles and materials from synthetic for use in underground mines; sheeting, coated/uncoated tissue, brattice materials and lagging mats; safety requirements, testing, marking) |
| DIN 22100-7-2000 |
用于矿井下合成的材料和物品.第7部分:安全要求,试验,标记 |
(Articles and materials from synthetics for use in underground mines - Part 7: Safety requirements, testing, marking) |
| DIN 22101-1982 |
连续输送机.松散物料用皮带输送机.计算和设计原则 |
(Continuous mechanical handling equipment; Belt conveyors for bulk materials; Bases for calculation and design) |
| DIN 22102-1-1991 |
松散物料用带织物层的输送机皮带.尺寸.要求.标志 |
(Conveyor belts with textile plies for bulk goods; dimensions, specifications, marking) |
| DIN 22102-3-1991 |
松散物料用带织物层的输送机皮带.固定式皮带连接 |
(Conveyor belts with textile plies for bulk goods; permanent joints) |
| DIN 22103-1994 |
耐火钢丝绳输送带.要求.检验 |
(Flameresistant steelcord conveyor belts; requirements and method of test) |
| DIN 22107-1984 |
连续输送机.松散物料皮带输送机的支承棍.主要尺寸 |
(Continous mechanical handling equipment; idler sets for belt conveyors for loose bulk materials; principal dimensions) |
| DIN 22109-1-2000 |
煤矿用织物输送带.第1部分:井下用单层衬垫输送带.尺寸.要求 |
(Conveyor belts with textile plies for coalmining - Part 1: Monoply belts for underground applications; dimensions, requirements) |
| DIN 22109-2-2000 |
煤矿用织物输送带.第2部分:井下用双层衬垫橡胶输送带.尺寸.要求 |
(Conveyor belts with textile plies for coalmining - Part 2: Rubber-belts with two plies for underground applications; dimensions, requirements) |
| DIN 22109-4-2000 |
煤矿用织物输送带.第4部分:露天用双层衬垫橡胶输送带.尺寸.要求 |
(Conveyor belts with textile plies for coalmining - Part 4: Rubber-belts with two plies for above ground applications; dimensions, requirements) |
| DIN 22109-5-1988 |
煤矿用织物输送带.标记 |
(Conveyor belts with textile plies for coalmining; branding) |
| DIN 2211-1-1984 |
传动件.窄三角皮带轮.尺寸.材料 |
(Power transmission elements; grooved pulleys for narrow V-belts; dimensions, materials) |
| DIN 2211-2-1984 |
传动件.窄三角皮带轮.槽的检验 |
(Power transmission elements; grooved pulleys for narrow V-belts; inspection of grooves) |
| DIN 2211-3-1986 |
传动件.窄三角皮带轮.与电机的配用 |
(Power transmission elements; grooved pulleys for narrow V-belts; assignment of pulleys to electric motors) |
| DIN 22110-2-1997 |
输送带连接的检验方法.第2部分:耐用试验.测定织物夹层输送带上连接件的运行时间 |
(Testing methods for conveyor belt joints - Part 2: Endurance running tests, determination of running time of belt joints at conveyor belts with textile plies) |
| DIN 22110-3-1993 |
输送带连接的检验方法.输送带连接耐用性测定 |
(Testing methods for conveyor belt joints; determination of time strength for conveyor belt joints (dynamical testing method)) |
| DIN 22111-2000 |
地下煤矿开采用皮带输送机.轻型承载支架 |
(Belt conveyors for underground coal mining - Light construction) |
| DIN 22112-1-2000 |
地下煤矿开采用皮带输送机.支承棍.第1部分:尺寸 |
(Belt conveyors for underground coal mining - Idlers - Part 1: Dimensions) |
| DIN 22112-2-1996 |
地下煤矿开采用皮带输送机.支承棍.第2部分:要求 |
(Belt conveyors for underground coalmining - Idlers - Part 2: Requirements) |
| DIN 22112-3-1996 |
地下煤矿开采用皮带输送机.支承棍.第3部分:检验 |
(Belt conveyors for underground coalmining - Idlers - Part 3: Testing) |
| DIN 22114-2001 |
地下煤矿用皮带输送机.重型支架 |
(Belt conveyors for underground coalmining - Heavy construction) |
| DIN 22115-1990 |
地下煤矿用皮带输送机.托辊的涂层.要求和检验 |
(Belt conveyors for underground coalmining; coated idlers; requirements and testing) |
| DIN 22116-1994 |
地下煤矿用带式输送机.额定直径156MM的压辊.尺寸.要求.标识 |
(Belt conveyors for underground coal mining - Pressure rollers DN 159 - Dimensions, requirements, marking) |
| DIN 22117-1988 |
煤矿用输送带.氧特性值的测定 |
(Conveyor belts for coalmining; determination of the oxygen index) |
| DIN 22118-1991 |
煤矿用带织物层的输送带.耐火检验 |
(Conveyor belts with textile plies for use in coal mining; fire testing) |
| DIN 22121-2000 |
煤矿用织物输送带.带单层或双层衬垫的不可拆卸的连接.尺寸、要求和标记 |
(Conveyor belts with textile plies for coalmining - Permanent joints for belts with one or two plies; dimensions, requirements, marking) |
| DIN 22122-2003 |
连续式机械搬运设备.输送带的可成槽形能力.与拉紧皮带轮接触的运输机皮带传送装置宽度部分的测量 |
(Continous mechanical handling equipment - Troughability of conveyor belts - Determination of that portion of width of conveyor belting in contact with idlers; Requirements, testing) |
| DIN 22129-1-1988 |
煤矿井下用钢索输送带.尺寸.要求 |
(Steel cord conveyor belts for underground coalmining; dimensions, requirements) |
| DIN 22129-2-1988 |
煤矿井下用钢索输送带.标记 |
(Steelcord conveyor belts for underground coalmining; marking) |
| DIN 22129-3-1988 |
煤矿井下用钢索输送带.检验 |
(Steelcord conveyor belts for underground coalmining; testing) |
| DIN 22129-4-1991 |
地下煤矿用钢索传送带.传送带的联结(草案)尺寸、要求 |
(Steelcord conveyor belts for use in underground coal mining; belt joints; dimensions, requirements) |
| DIN 22131-1-1988 |
一般输送技术用钢索输送带.尺寸.要求 |
(Steelcord conveyor belts for hoisting and conveying; dimensions, requirements) |
| DIN 22131-2-1988 |
一般输送技术用钢索输送带.标记 |
(Steelcord conveyor belts for hoisting and conveying; marking) |
| DIN 22131-3-1988 |
一般输送技术用钢索输送带.检验 |
(Steelcord conveyor belts for hoisting and conveying; testing) |
| DIN 22131-4-1988 |
一般输送技术用钢索输送带.带连接.尺寸.要求 |
(Steelcord conveyor belts for hoisting and conveying; belt joints; dimensions, requirements) |
| DIN 2215-1998 |
环形三角皮带.标准的三角皮带.尺寸 |
(Endless V-belts - Classical V-belts - Dimensions) |
| DIN 2216-1972 |
开端的三角皮带.尺寸 |
(Open Ended V-belts; Dimensions) |
| DIN 2217-1-1973 |
传动件.三角皮带轮.尺寸.材料 |
(Driving Elements; V-belt Pulleys; Dimensions, Material) |
| DIN 2217-2-1973 |
传动件.三角皮带轮.槽的检验 |
(Driving Elements; Grooved Pulleys for V-belts; Testing of Grooves) |
| DIN 2218-1976 |
机械制造用环形三角皮带.传动计算.额定功率 |
(Endless V-belts for Mechanical Engineering; Calculation of Drives, Power Ratings) |
| DIN 222-1981 |
套式扩孔钻 |
(Shell drills) |
| DIN 22200-1994 |
连续输送机.履带式输送机.计算原则 |
(Continuous mechanical handling equipment; apron conveyors; principles for calculation) |
| DIN 2221-1982 |
按DIN238T.2的钻夹锥套用锥度塞规 |
(Taper plug gauges for taper sleeves for drill chucks) |
| DIN 2222-1982 |
按DIN238T.1和T.2的钻夹锥套用锥度环规 |
(Taper ring gauges for taper shafts for drill chucks) |
| DIN 22252-2001 |
经检验的矿用输送机和回采设备的圆钢链 |
(Round steel link chains for conveyors and winning equipment in mining) |
| DIN 22253-1987 |
链连接节.链钩装配.尺寸.要求.检验 |
(Chain connectors; shackle type connector units; dimensions, requirements, testing) |
| DIN 22255-2001 |
矿山中连续输送机用的平扁节链 |
(Flat link chains for use in continuous conveyors in mining) |
| DIN 22256-2002 |
链式输送机和采煤设备用链轮组件.尺寸,要求和试验 |
(Chain sprockets for chain conveyors and coal winning equipment - Dimensions, requirements, testing) |
| DIN 22257-1990 |
链式刮板输送机用刮板.外链带.尺寸.要求.检验 |
(Scraper bars for chain conveyors; outboard chain assembly; dimensions, requirements, testing) |
| DIN 22258-1-2003 |
链连接件.第1部分:扁形连接件 |
(Chain connectors - Part 1: Flat type connectors) |
| DIN 22258-2-2003 |
链连接件.第2部分:楔形连接件 |
(Chain connectors - Part 2: Kenter type connectors) |
| DIN 22258-3-2003 |
链连接件.第3部分:块状连接件 |
(Chain connectors - Part 3: Block type connectors) |
| DIN 22261-1-1997 |
褐煤露天矿中的挖掘机,排土机和附属装置.第1部分:结构,开工运转和检验 |
(Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 1: Construction, commissioning and monitoring) |
| DIN 22261-1-2004 |
褐煤露天矿中的挖掘机、抛煤机和附属装置.第1部分:建造、投产和监测 |
|
| DIN 22261-2 Berichtigung 1-2003 |
DIN22261-2-1998的技术勘误 |
(Corrigenda to DIN 22261-2:1998-01) |
| DIN 22261-2-1998 |
褐煤露天矿用挖掘机,带式排土机和辅助装置.第2部分:设计原则 |
(Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 2: Calculation principles) |
| DIN 22261-3-1997 |
褐煤露天矿中的挖掘机,排土机和附属装置.第3部分:焊接连接,接口方式,评定等级分类,检验说明 |
(Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 3: Welded connections, joint types, classification, test instruction) |
| DIN 22261-4-1997 |
褐煤露天矿中的挖掘机,排土机和附属装置.第4部分:提升铰车用机械制动器 |
(Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 4: Hoisting winch brakes) |
| DIN 22261-5-1997 |
褐煤露天矿中的挖掘机,排土机和附属装置.第5部分:回转装置用机械制动器和超载保险器 |
(Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 5: Slewing brakes and overload protecting devices) |
| DIN 22261-6-1997 |
褐煤露天矿中的挖掘机,排土机和附属装置.第6部分:绳索和绳索紧固的检验 |
(Excavators, spreaders and auxiliary equipment in opencast lignite mines - Part 6: Examination of ropes and rope end fittings) |
| DIN 2231-1982 |
公称尺寸3至100mm的极限卡规及锻制量规体 |
(Gap gauges “GO and NOT GO“ and forged gauging members above 3 to including 100 mm nominal size) |
| DIN 2232-1982 |
公称尺寸3至100mm带锻制量规体的通端卡规 |
(Gap gauges “GO“ with forged gauging member above 3 to and including 100 mm nominal size) |
| DIN 2233-1982 |
公称尺寸3至100mm带锻制量规体的止端卡规 |
(Gap gauges “NOT GO“ with forged gauging member above 3 to and including 100 mm nominal size) |
| DIN 2239-1995 |
几何尺寸检验.工业长度检验用量规.要求和检验 |
(Verification of geometrical parameters - Gauges in dimensional metrology - Requirements and testing) |
| DIN 2240-1-2001 |
几何产品规范(GPS).手柄.第1部分:公称直径40mm以下带有1:50锥形轴颈的量规手柄 |
(Geometrical Product Specification (GPS) - Handles - Part 1: For gauging members with taper lock 1:50 up to 40 mm nominal diameter) |
| DIN 2240-2-2001 |
几何产品规范(GPS).手柄.第2部分:公称直径40mm以上的量规手柄.手柄.固定螺钉和夹件 |
(Geometrical Product Specification (GPS) - Handles - Part 2: For gauging members over 40 mm nominal diameter; Handles, fixing screws and clamps) |
| DIN 2240-3-2001 |
几何产品规范(GPS).手柄.第3部分:精密工业用的量规体手柄 |
(Geometrical Product Specification (GPS) - Handles - Part 3: For gauging members for use in precision mechanics) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com