标准号 |
中文名称 |
英文名称 |
| DIN EN 22313-1992 |
纺织品.用测量回复角的方法确定纬向折皱织物试样的折皱恢复能力 |
(Textiles; determination of the recovery form creasing of a horizontally folded specimen by measuring the angle of recovery (ISO 2313:1972); german version EN 22313:1992) |
| DIN EN 22339-1992 |
未淬火的锥销 |
(Taper pins, unhardened (ISO 2339:1986); german version EN 22339:1992) |
| DIN EN 22340-1992 |
无头螺栓 |
(Clevis pins without head (ISO 2340:1986); german version EN 22340:1992) |
| DIN EN 22341-1992 |
有头螺栓 |
(Clevis pins with head (ISO 2341:1986); german version EN 22341:1992) |
| DIN EN 2236-1992 |
航空和航天.带合金钢头的配合螺栓.交货技术条件 |
(Aerospace series; pins, shear, headed, close tolerance shank, alloy steel; technical specification; german version EN 2236:1992) |
| DIN EN 22401-1994 |
涂敷焊条.效率,金属回收和熔敷系数的测定 |
(Covered electrodes; determination of the efficiency, metal recovery and deposition coefficient (ISO 2401:1972); German version EN 22401:1994) |
| DIN EN 2243-2-1991 |
航空和航天.结构胶粘剂.检验方法.第2部分:金属-金属滚动剥离试验 |
(Aerospace series; structural adhesives; test methods; part 2: peel metal-metal; german version EN 2243-2:1991) |
| DIN EN 2243-3-1992 |
航空和航天.构件胶粘剂.检验方法.第3部分:蜂窝芯剥离试验 |
(Aerospace series; structural adhesives; test methods; part 3: peeling test metal-honeycomb core; german version EN 2243-3:1991) |
| DIN EN 2243-4-1991 |
航空和航天.结构胶粘剂.检验方法.第4部分:蜂窝式金属芯与层面垂直的拉伸试验 |
(Aerospace series; structural adhesives; test methods; part 4: metal-honeycomb core flatwise tensile test; german version EN 2243-4:1991) |
| DIN EN 2243-5-1992 |
航空和航天.结构胶粘剂.检验方法.第5部分:老化试验 |
(Aerospace series; structural adhesives test methods; part 5: ageing tests; german version EN 2243-5:1992) |
| DIN EN 225-1989 |
油雾化燃烧器.带旋转轴和外部驱动的泵.尺寸 |
(Atomizing oil burners; pumps with rotating shaft and external drive; dimensions; german version EN 225:1987) |
| DIN EN 22553-1997 |
焊接接缝和软钎焊接缝.图纸上符号表示法 |
(Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992); German version EN 22553:1994) |
| DIN EN 22568-1990 |
手用和机用圆板牙和圆板牙架(ISO2568:1988) |
(Hand and machine-operated circular screwing dies and hand-operated die stocks (ISO 2568:1988); german version EN 22568:1989) |
| DIN EN 2257-1997 |
航空和航天.铝和铝合金制结构圆管.直径6mm= |
(Aerospace series - Circular tubes for structures in aluminium and aluminium alloys; diameter 6 mmD100 mm, thickness 1 mma6 mm; dimensions; German version EN 2257:1997) |
| DIN EN 2258-1997 |
航空和航天.铝和铝合金制圆形管道.直径3.2mm= |
(Aerospace series - Circular tubes for fluids in aluminium and aluminium alloys; diameter 3,2 mmD100 mm, thickness 0,6 mma2,5 mm; dimensions; German version EN 2258:1997) |
| DIN EN 2259-1995 |
航空和航天.硅树脂橡胶(VMQ).硬度:50IRHD(国际橡胶硬度标度) |
(Aerospace series - Silicone rubber (VMQ) - Hardness 50 IRHD; German version EN 2259:1995) |
| DIN EN 226-1988 |
油雾化燃烧器.燃烧器和发热器之间的连接尺寸 |
(Atomizing oil burners; connecting dimensions between burners and heat generators; german version EN 226:1987) |
| DIN EN 2260-1995 |
航空和航天.硅树脂橡胶(VMQ).硬度:60IRHD |
(Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD; German version EN 2260:1995) |
| DIN EN 2261-1995 |
航空和航天.硅树脂橡胶(VMQ).硬度:70IRHD |
(Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD; German version EN 2261:1995) |
| DIN EN 2262-1995 |
航空和航天.高撕裂强度的硅合成橡胶(VMQ/PVMQ).硬度:50IRHD |
(Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD; German version EN 2262:1995) |
| DIN EN 2264-1996 |
航空和航天.合金钢制镀镉MoS2润滑带各种深度园柱形沉头孔双面法兰活动式自锁铆接螺母.等级:900MPa(室温下)/ |
(Aerospace series - Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated, MoS lubricated - Classification: 900 MPa (at ambient temperature)/235 C; German version EN 2264:1996) |
| DIN EN 22719-1993 |
石油产品和润滑材料.燃点的测定.潘斯基-马丁闭杯法 |
(Petroleum products and lubricants; determination of flash point; Pensky-Martens closed cup method (ISO 2719:1988); German version EN 22719:1993) |
| DIN EN 228-2000 |
机动车用燃料.无铅汽油.要求和试验方法.德语版EN228:1999 |
(Automotive fuels - Unleaded petrol - Requirements and test methods; German version EN 228:1999) |
| DIN EN 228-2004 |
机动车用燃料.无铅汽油.要求和试验方法 |
|
| DIN EN 2282-1992 |
航空和航天.飞机的供电特性 |
(Aerospace series; characteristics of aircraft electrical supplies; german version EN 2282:1991) |
| DIN EN 2283-1996 |
航空和航天.检验飞机上电缆的敷设 |
(Aerospace series - Testing of aircraft wiring; German version EN 2283:1996) |
| DIN EN 2284-1991 |
航空和航天.铝和锻铝合金的硫酸阳极氧化 |
(Aerospace series; sulphuric acid anodizing of aluminium and wrougth aluminium alloys; german version EN 2284:1991) |
| DIN EN 2285-1990 |
航空和航天.带自动润滑涂层铝合金制无法兰的套筒.尺寸和负载 |
(Aerospace series; bushes plain, aluminium alloy, with self-lubricating liner; dimensions and loads; german version EN 2285:1989) |
| DIN EN 22857-1990 |
ISO公制螺纹公差为4H到8H.以及4G到6G的粗牙与细牙螺纹用磨削丝锥.螺纹部分的制造公差 |
(Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion (ISO 2857:1973 incl. AMD 1:1984 and AMD 2:1986); german version EN 22857:1989) |
| DIN EN 22858-1993 |
离心式末端轴吸泵(额定压力16巴)标记、额定功率和尺寸 |
(End-suction centrifugal pumps (rating 16 bar); designation, nominal duty point and dimensions (ISO 2858:1975); German version EN 22858:1993) |
| DIN EN 2286-1990 |
航空和航天.带自动润滑涂层铝合金制有法兰的套筒.尺寸和负载 |
(Aerospace series; bushes flanged, aluminium alloy, with self-lubricating liner; dimensions and loads; german version EN 2286:1989) |
| DIN EN 2287-1990 |
航空和航天.带自动润滑涂层铝合金制无法兰的套筒.尺寸和负载 |
(Aerospace series; bushes, plain, corrosion resisting steel, with self-lubricating liner; dimensions and loads; german version EN 2287:1989) |
| DIN EN 22876-1993 |
包装.满装的运输包装.滚动试验(顺序) |
(Packaging; complete, filled transport packages; rolling test (ISO 2876:1985); german version EN 22876:1992) |
| DIN EN 2288-1990 |
航空和航天.带自动润滑涂层铝合金制有法兰的套筒.尺寸和负载 |
(Aerospace series; bushes, flanged, corrosion resisting steel, with self-lubricating liner; dimensions and loads; german version EN 2288:1989) |
| DIN EN 2289-1996 |
航空和航天.飞行控制用铝合金制管身.交货技术条件 |
(Aerospace series - Rod bodies in aluminium alloy for flight controls - Technical specification; German version EN 2289:1996) |
| DIN EN 23-1-1978 |
粉状洗涤剂和清洁剂的包装.纸板盒和圆筒的尺寸和容器 |
(Packages for washing and cleaning powders; dimensions and volumes of cartons and drums from fibre board) |
| DIN EN 230-1991 |
整体油喷嘴.安全.检验.调节及安全性时间用装置 |
(Monobloc oil burners; safety, control and regulation devices and safety times; german version EN 230:1990) |
| DIN EN 230-2005 |
燃油器用自动燃烧器控制系统 |
|
| DIN EN 23015-1994 |
石油产品.烟点测定 |
(Petroleum products; determination of cloud point (ISO 3015:1992); German version EN 23015:1994) |
| DIN EN 23035-1994 |
单面和单壁瓦楞纤维纸板.平面耐压力的测定 |
(Single-faced and single-wall corrugated fibreboard - Determination of flat crush resistance (ISO 3035:1982); German version EN 23035:1994) |
| DIN EN 2310-1991 |
航空和航天.非金属材料燃烧特性分类用检验法 |
(Aerospace series; test methods for the flame resistance rating of non-metallic materials; german version EN 2310:1991) |
| DIN EN 23107-1992 |
牙科用氧化锌--丁香酚--粘固剂和氧化锌--非丁香粉--粘固剂 |
(Dental zinc oxide/eugenol cements and zinc oxide non-eugenol cements (ISO 3107:1988); german version EN 23107:1991) |
| DIN EN 2311-1988 |
航空和航天.有自动润滑衬层的轴瓦.交货技术条件 |
(Aerospace series; bushes with self-lubricating liner; technical specification) |
| DIN EN 2318-1993 |
航空和航天.AL-P2024-T3511铝合金.1,2mm≤a或D≤150mm挤压棒材和型材 |
(Aerospace series; aluminium alloy AL-P2024-T3511; extruded bars and sections 1,2 mma or D150 mm; German version EN 2318:1992) |
| DIN EN 232-2003 |
浴盆.连接尺寸 |
(Baths - Connecting dimensions; German version EN 232:2003) |
| DIN EN 2326-1992 |
航空和航天.AL-P6082-T6铝合金.挤压棒材和型材a或D≤200mm |
(Aerospace series; aluminium alloy AL-P6082-T6; extruded bars and sections a or D200 mm; german version EN 2326:1992) |
| DIN EN 2327-1988 |
航空和航天.航空和航天系列合金钢向心锯齿垫圈.尺寸 |
(Aerospace series; washers, lock with radial serrations in alloy steel; dimensions) |
| DIN EN 23270-1991 |
漆.涂层材料以及涂层原材料.预处理和试验用温度和空气湿度 |
(Paints and varnishes and their raw materials; temperatures and humidity for conditioning and testing (ISO 3270:1984); german version EN 23270:1991) |
| DIN EN 2328-1988 |
航空和航天.飞行操纵用垫圈.垫片.尺寸 |
(Aerospace series; washers, tab for flight control rods; dimensions) |
| DIN EN 2329-1993 |
航空航天.玻璃纤维预浸带.测定单位面积质量的检验方法 |
(Aerospace series; textile glass fibre preimpregnates; test method for the determination of mass per unit area; german version EN 2329:1993) |
| DIN EN 233-1999 |
卷式壁衬.成品壁纸.聚乙烯壁纸和塑料壁纸的规范 |
(Wall coverings in roll form - Specification for finished wallpapers, wall vinyls and plastics wallcoverings; German version EN 233:1999) |
| DIN EN 2330-1993 |
航空航天.玻璃纤维预浸带.测定易挥发成分比例的检验方法 |
(Aerospace series; textile glass fibre preimpregnates; test method for the determination of the content of volatile matter; german version EN 2330:1993) |
| DIN EN 2331-1993 |
航空航天.玻璃纤维预浸带.测定树脂成份、纤维成份以及单位面积纤维质量的检验方法 |
(Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin and fibre content and mass of fibre per unit area; german version EN 2331:1993) |
| DIN EN 2332-1993 |
航空航天.玻璃纤维预浸带.测定树脂流动的检验方法 |
(Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin flow; german version EN 2332:1993) |
| DIN EN 2334-1997 |
航空和航天.铬硫酸中铝和铝合金的酸洗 |
(Aerospace series - Chromic-sulphuric acid pickle of aluminium and aluminium alloys; German version EN 2334:1997) |
| DIN EN 2335-1988 |
航空和航天.耐蚀钢制不带导入槽的关节轴承.尺寸和负荷 |
(Aerospace series; bearings-spherical plain in corrosion resisting steel without assembly slot; dimensions and loads) |
| DIN EN 2336-1988 |
航空和航天.耐蚀钢制带导入槽的关节轴承.尺寸和负荷 |
(Aerospace series; bearings-spherical plain in steel with assembly slots; dimensions and loads) |
| DIN EN 2337-1996 |
航空和航天.关节轴承.交货技术条件 |
(Aerospace series - Spherical plain bearings - Technical specification; German version EN 2337:1996) |
| DIN EN 2338-2003 |
航空航天系列.钛和钛合金热轧薄板材.厚度6mm～8mm |
(Aerospace series - Sheets, hot rolled in titanium and titanium alloys - Thickness 0,8 mm a 6 mm; Dimensions; German and English version EN 2338:2001) |
| DIN EN 2339-2003 |
航空航天系列.厚度0.2mma6mm的冷轧钛和钛合金薄板.尺寸 |
(Aerospace series - Sheets, cold rolled, in titanium and titanium alloys, thickness 0,2 mma6 mm - Dimensions; German and English version EN 2339:2001) |
| DIN EN 234-1997 |
卷式壁衬.对后处理用壁衬的规定(包括更改A1:1996) |
(Wall coverings in roll form - Specification for wallcoverings for subsequent decoration (includes Amendment A1:1996); German version EN 234:1989 + A1:1996) |
| DIN EN 2344-2003 |
航空航天系列.耐热合金机械加工圆棒材.直径10mm～180mm |
(Aerospace series - Round bars, machined, in heat resisting alloys - Diameter 10 mm D 180 mm; Dimensions; German and English version EN 2344:2001) |
| DIN EN 2348-1989 |
航空和航天.飞机操纵钢索组件.交货技术条件 |
(Aerospace series; control cable assemblies; technical specification) |
| DIN EN 235-2002 |
墙面饰层.词汇与符号 |
(Wall coverings - Vocabulary and symbols; German version EN 235:2001) |
| DIN EN 2350-1991 |
航空和航天.保护开关.交货技术条件 |
(Aerospace series; circuit breakers; technical specification; german version EN 2350:1990) |
| DIN EN 2353-1989 |
航空和航天.不锈钢制旋转套筒和操纵钢索.尺寸和负荷 |
(Aerospace series; turnbarrels, control cable in corrosion resisting steel; dimensions and loads) |
| DIN EN 2354-1989 |
航空和航天.不锈钢制带螺纹眼端头的操纵钢索.尺寸和负荷 |
(Aerospace series; eye-ends, threaded, control cable in corrosion resisting steel; dimensions and loads) |
| DIN EN 2355-1989 |
航空和航天.不锈钢制带螺纹叉端头的操纵钢索.尺寸和负荷 |
(Aerospace series; fork-ends, threaded, control cable in corrosion resisting steel; dimensions and loads) |
| DIN EN 2356-1989 |
航空和航天.不锈钢制滚珠轴承用带螺纹叉端的操纵钢索.尺寸和负荷 |
(Aerospace series; fork-ends threaded, control cable for rolling bearing in corrosion resisting steel; dimensions and loads) |
| DIN EN 2357-1989 |
航空和航天.用于张紧操纵钢索的不锈钢带螺纹的钢索端头 |
(Aerospace series; stud-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads) |
| DIN EN 2358-1989 |
航空和航天.用于操纵钢索的不锈钢带眼的钢索端头 |
(Aerospace series; eye-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads) |
| DIN EN 2359-1989 |
航空和航天.用于张紧操纵钢索的不锈钢带叉的钢索端头 |
(Aerospace series; fork-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads) |
| DIN EN 2360-1989 |
航空和航天.用于张紧操纵钢索的不锈钢滚珠轴承用带叉钢索端头 |
(Aerospace series; fork-ends for rolling bearings in corrosion resisting steel swaged on type, control cable; dimensions and loads) |
| DIN EN 2361-1989 |
航空和航天.用于张紧操纵钢索的不锈钢制双侧带球头的钢索端头 |
(Aerospace series; ball-ends, double shank in corrosion resisting steel swaged on type, control cable; dimensions and loads) |
| DIN EN 2362-1989 |
航空和航天.用于张紧操纵钢索的不锈钢制单侧带球头的钢索端头 |
(Aerospace series; ball-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads) |
| DIN EN 2363-1989 |
航空和航天.操纵钢索的夹紧装置用保险弹簧.尺寸 |
(Aerospace series; locking clips for turnbuckles of control cables; dimensions) |
| DIN EN 2364-1989 |
航空和航天.带帽紧配合销 |
(Aerospace; pins, shear, headed, close tolerance; german version EN 2364:1989) |
| DIN EN 2365-1989 |
航空和航天.铝合金环 |
(Aerospace; collars, aluminium alloy; german version EN 2365:1989) |
| DIN EN 23661-1994 |
离心式末端轴吸泵.基座和安装尺寸 |
(End-suction centrifugal pumps - Baseplate and installation dimensions (ISO 3661:1977); German version EN 23661:1993) |
| DIN EN 2367-1989 |
航空和航天.EN2573钢制开口销 |
(Aerospace; split pins in steel EN 2573; german version EN 2367:1989) |
| DIN EN 237-1996 |
液化矿物油制品.燃油.用原子吸收光谱法测定低铅含量 |
(Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry; German version EN 237:1996) |
| DIN EN 237-2004 |
液态石油产品.汽油.用原子吸收光谱法测定低铅浓度 |
|
| DIN EN 2374-1991 |
航空和航天.玻璃纤维增强成形材料和芯夹层材料.试验板的制造 |
(Aerospace series; glass fibre-reinforced mouldings and sandwich composites; production of test panels; german version EN 2374:1991) |
| DIN EN 2375-1992 |
航空和航天.树脂浸渍材料.从非成品中取样的方法 |
(Aerospace series; resin preimpregnated materials; production batch sampling procedure; german version EN 2375:1992) |
| DIN EN 23758-1993 |
纺织品.使用符号的保养标记代码 |
(Textiles; care labelling code using symbols (ISO 3758:1991); German version EN 23758:1993) |
| DIN EN 2377-1989 |
航空和航天.玻璃纤维增强塑料.测定外表层间抗剪强度的检验方法 |
(Aerospace series; glass fibre reinforced plastics; test method; determination of apparent interlaminar shear strength; german version EN 2377:1989) |
| DIN EN 2378-1995 |
航空和航天.纤维增强塑料.通过浸入测定吸水量 |
(Aerospace series - Fibre reinforced plastics - Determination of water absorption by immersion; German version EN 2378:1995) |
| DIN EN 238-1996 |
液化矿物油制品.燃油.用红外线光谱法测定苯含量 |
(Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry; German version EN 238:1996) |
| DIN EN 238-2004 |
液化石油产品.汽油.用红外线光谱测定法测定苯含量 |
|
| DIN EN 2381-1993 |
航空和航天.AL-P7009-T7452铝合金.40mm≤a≤150mm自由锻件 |
(Aerospace series; aluminium alloy AL-P7009-T7452; hand forgings 40 mma150 mm; German version EN 2381:1992) |
| DIN EN 23823-2-1991 |
牙科用旋转器械.第2部分:钢及硬金属制精整磨轮 |
(Dental rotary instruments; part 2: steel and carbide finishing burs (ISO 3823-2:1986); german version EN 23823-2:1991) |
| DIN EN 2384-1992 |
航空和航天.AL-P2014A-T6511铝合金.挤压棒材和型材a或D≤150mm |
(Aerospace series; aluminium alloy AL-P2014A-T6511; extruded bars and sections a or D150 mm; german version EN 2384:1992) |
| DIN EN 2385-1993 |
航空和航天.AL-P7009-T74511铝合金.a或D≤12.5mm挤压棒材和型材 |
(Aerospace series; aluminium alloy AL-P7009-T74511; extruded bars and sections a or D125 mm; German version EN 2385:1992) |
| DIN EN 2395-1994 |
航空和航天.铝合金AL-P2014A-T4或T42.薄板和带材.0.4mm |
(Aerospace series; aluminium alloy AL-P2014A-T4 or T42; sheet and strip; 0,4 mma6 mm; German version EN 2395:1994) |
| DIN EN 24006-1993 |
封闭管道内液体流量的测量.术语和符号 |
(Measurement of fluid flow in closed conduits; vocabulary and symbols (ISO 4006:1991); German version EN 24006:1993) |
| DIN EN 24015-1991 |
六角螺钉.缩杆螺钉(杆直径≈螺纹中径)产品等级B(ISO4015-79) |
(Hexagon head bolts, reduced shank (shank diameterpitch diameter); product grade B (ISO 4015:1979); german version EN 24015:1991) |
| DIN EN 241-2000 |
液体石油产品.钠含量测定.原子吸收分光光度测定法 |
(Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method; German version EN 241:2000) |
| DIN EN 2413-1995 |
航空和航天.镀镉合金钢制短螺纹小头六角紧配合螺杆.等级:1100MPa(室温235℃) |
(Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 C; German version EN 2413:1995) |
| DIN EN 24159-1990 |
锰铁和硅锰铁合金中锰含量的测定.电势滴定法 |
(Ferromanganese and ferrosilicomanganese; determination of manganese content; potentiometric method (ISO 4159, 1st edition: 1978.12.15); german version EN 24159:1989) |
| DIN EN 24178-1993 |
满装的运输包装.抽样检验.要记录的信息 |
(Complete, filled transport packages; distribution trials; information to be recorded (ISO 4178:1980); german version EN 24178:1992) |
| DIN EN 24180-1-1993 |
满装的运输包装.试验计划编制的一般规则.第1部分:一般原则 |
(Complete, filled transport packages; general rules for the compilation of performance test schedules; part 1: general principles (ISO 4180-1:1980); german version EN 24180-1:1992) |
| DIN EN 24180-2-1993 |
满装的运输包装.试验计划编制的一般规则.第2部分:负荷参数 |
(Complete, filled transport packages; general rules for the compilation of performance test schedules; part 2: quantitative data (ISO 4180-2:1980); german version EN 24180-2:1992) |
| DIN EN 24185-1993 |
封闭管道内液体流量测量.称量方法 |
(Measurement of liqid flow in closed conduits; weighing method (ISO 4185:1980); German version EN 24185:1993) |
| DIN EN 24230-1990 |
R系列.圆锥形管螺纹用手用圆板牙和机用圆板牙(ISO4230:1987) |
(Hand- and machine-operated circular screwing dies for taper pipe threads, R series (ISO 4230:1987); german version EN 24230:1989) |
| DIN EN 24231-1990 |
直管螺纹的手动和机动圆板牙.G系列 |
(Hand and machine-operated circular screwing dies for parallel pipe threads, G series (ISO 4231:1987); german version EN 24231:1989) |
| DIN EN 2424-1995 |
航空和航天.航空和航天产品的标识 |
(Aerospace series - Marking of aerospace products; German version EN 2424:1995) |
| DIN EN 24260-1994 |
石油产品和烃类.硫含量的测定.威克波耳德(Wickbold)燃烧法 |
(Petroleum products and hydrocarbons; determination of sulfur content; Wickbold combustion method (ISO 4260:1987); German version EN 24260:1994) |
| DIN EN 2428-1995 |
航空和航天.乙丙橡胶(EPM/EPDM).硬度:50IRHD |
(Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 50 IRHD; German version EN 2428:1995) |
| DIN EN 2429-1995 |
航空和航天.乙丙橡胶(EPM/EPDM).硬度:60IRHD |
(Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 60 IRHD; German version EN 2429:1995) |
| DIN EN 2430-1995 |
航空和航天.乙丙橡胶(EPM/EPDM).硬度:70IRHD |
(Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 70 IRHD; German version EN 2430:1995) |
| DIN EN 2431-1995 |
航空和航天.乙丙橡胶(EPM/EPDM).硬度:80IRHD |
(Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 80 IRHD; German version EN 2431:1995) |
| DIN EN 2432-1995 |
航空和航天.乙丙橡胶(EPM/EPDM).硬度:90IRHD |
(Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 90 IRHD; German version EN 2432:1995) |
| DIN EN 2437-2003 |
航空航天系列.铝及铝合金用铬酸盐转化涂层(黄色) |
(Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys; German and English version EN 2437:2001) |
| DIN EN 246-1990 |
卫生设备配件.防溅板的一般要求 |
(Sanitary taps; general specifications for flow rate regulators; german version EN 246:1989) |
| DIN EN 24624-1992 |
清漆和涂料.判断粘附性的撕裂试验 |
(Paints and varnishes; pull-off test for adhesion (ISO 4624:1978); german version EN 24624:1992) |
| DIN EN 24641-1993 |
给水和排水用橡胶软管,要求 |
(Rubber hoses for water suction and discharge; specification (ISO 4641:1991); German version EN 24641:1993) |
| DIN EN 247-1997 |
热交换器.专业术语 |
(Heat exchangers - Terminology; German version EN 247:1997) |
| DIN EN 24766-1992 |
一字槽平端紧定螺钉 |
(Slotted set screws with flat point (ISO 4766:1983); german version EN 24766:1992) |
| DIN EN 248-2003 |
卫生工程用配件.镍铬电镀层的一般要求 |
(Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr; German version EN 248:2002) |
| DIN EN 24829-1-1992 |
钢和铸铁.硅总含量的测定.还原钼硅盐酸分光光度法.第1部分:硅含量在0.05%~1.0%之间 |
(Determination of total silicon content of steel and cast iron by the reduced molybdosilicate spectrophotometric method; silicon contents between 0,05 and 1,0 % (ISO 4829-1:1986); german version EN 24829-1:1990) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com