标准号 |
中文名称 |
英文名称 |
| NF E29-303-2-2000 |
阀门.阀体、阀盖和阀套用材料.第2部分:欧洲标准中没有规定的钢 |
(Valves - Materials for bodies, bonnets and covers - Part 2 : steels other than those specified in European Standards.) |
| NF E29-303-3-2000 |
阀门.阀体、阀盖和阀套用材料.第3部分:欧洲标准中规定的铸铁 |
(Valves - Materials for bodies, bonnets and covers - Part 3 : cast iron specified in European Standards.) |
| NF E29-303-4-2003 |
阀门.阀体、阀盖和阀套用材料.第4部分:欧洲标准中规定的铜合金 |
(Valves - Materials for bodies, bonnets and covers - Part 4 : copper alloys specified in European Standards.) |
| NF E29-305-1999 |
工业阀门.钢阀门对缝焊接末端.(欧洲标准EN 12627) |
(INDUSTRIAL VALVES. BUTT WELDING ENDS FOR STEEL VALVES. (EUROPEAN STANDARD EN 12627).) |
| NF E29-306-1-1995 |
阀.术语.第1部分:阀型的定义 |
(Valves. Terminology. Part 1 : definition of types of valves.) |
| NF E29-306-2-1997 |
阀门.术语.第2部分:阀门件的定义 |
(VALVES. TERMINOLOGY. PART 2 : DEFINITION OF COMPONENTS OF VALVES. (EUROPEAN STANDARD EN 736-2).) |
| NF E29-306-3-1999 |
阀门.术语.第3部分:术语的定义 |
(VALVES. TERMINOLOGY. PART 3 : DEFINITION OF TERMS. (EUROPEAN STANDARD EN 736-3).) |
| NF E29-306-3/A1-2001 |
阀门.术语.第3部分:术语定义 |
(Valves - Terminology - Part 3 : definition of terms.) |
| NF E29-308-1985 |
工业阀门.技术规范和协调订货证明书样式 |
(INDUSTRIAL VALVES. TECHNICAL SPECIFICATIONS AND CONFORMITY WITH ORDER ATTESTATION MODELS.) |
| NF E29-309-2001 |
工业阀门.操作件尺寸控制的方法 |
(Industrial valves - Method for sizing the operating element.) |
| NF E29-310-1992 |
通用工业阀的标记 |
(Marking of general purpose industrial valves.) |
| NF E29-311-1-2003 |
工业阀门.阀门试验.第1部分:压力试验、试验程序和验收标准.强制性要求 |
(Industrial valves - Testing of valves - Part 1 : pressure tests, test procedures and acceptance criteria - Mandatory requirements.) |
| NF E29-311-1982 |
阀门.阀门制造设备的工厂压力试验 |
(Valves. Factory pressure testing for valves.) |
| NF E29-311-2-2003 |
工业阀门.阀门试验.第2部分:试验、试验程序和验收标准.补充标准 |
(Industrial valves - Testing of valves - Part 2 : tests, test procedures and acceptance criteria - Supplementary criteria.) |
| NF E29-313-1990 |
工业阀门.阀门输送量的测定 |
(Industrial valves. Determination of flow of valves. Case of compressible fluids.) |
| NF E29-314-1986 |
阀门.试验.术语.方法 |
(VALVES. TESTS. NOMENCLATURE. METHODOLOGY.) |
| NF E29-316-1-2000 |
供水用阀门.适用性要求和专用检查试验.第1部分:一般要求 |
(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1 : general requirements.) |
| NF E29-316-2-2000 |
供水用阀门.适用性要求和专用检查试验.第2部分:隔离阀 |
(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2 : isolating valves.) |
| NF E29-316-3-2000 |
供水用阀门.适用性要求和专用检查试验.第3部分:止回阀 |
(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3 : check valves.) |
| NF E29-316-4-2000 |
供水阀门.特殊目的要求和适合验证试验的适配性. 第4部分:空气阀门 |
(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4 : air valves.) |
| NF E29-316-5-2001 |
供水用阀门.适用性要求和专用检查试验.第5部分:控制阀门 |
(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5 : control valves.) |
| NF E29-317-1999 |
工业阀门.化工和石油化工加工工业阀门.要求和试验 |
(Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests.) |
| NF E29-318-2000 |
工业阀门.LNG隔绝阀门.合适性和验证试验规范 |
(Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests.) |
| NF E29-319-2003 |
最大工作压力为16bar及以下的配气系统用阀.性能要求 |
(Valves for gas distribution systems with maximum operating pressure less than or equal 16 bar - Performance requirements.) |
| NF E29-321-1999 |
阀门.用水作为试验液体的流动阻力试验 |
(Valves - Test of flow resistance using water as test fluid.) |
| NF E29-330-2000 |
工业阀门.钢插板阀门 |
(Industrial valves - Steel gate valves.) |
| NF E29-332-2003 |
工业用阀.铸铁闸阀 |
(Industrial valves - Cast iron gate valves.) |
| NF E29-334-2003 |
工业用阀门.铜合金闸阀 |
(Industrial valves - Copper alloy gate valves.) |
| NF E29-335-2003 |
石油和天然气工业用尺寸为DN 100及更小的钢闸阀、球阀和止回阀 |
(Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries.) |
| NF E29-350-2003 |
工业用阀.钢制球阀、球状截止阀和止回阀 |
(Industrial valves - Steel globe and globe stop and check valves.) |
| NF E29-354-2003 |
工业用阀.铸铁球阀 |
(Industrial valves - Cast iron globe valves.) |
| NF E29-372-2001 |
工业阀门.铸铁止回阀 |
(Industrial valves - Cast iron check valves.) |
| NF E29-373-1984 |
工业阀门.止回阀.钢制，单摇板式，带法兰盘,ISO标准压力16，20，25，40，50，100 |
(Industrial valves. Flanged steel swing check valves. ISO PN A6, ISO PN 20, ISO PN 25, ISO PN 40, ISO PN 50, ISO PN 100.) |
| NF E29-382-1981 |
工业阀门.加压和放压的加厚部件 |
(Industrial valves. Drain hoss or pressure tap.) |
| NF E29-383-1981 |
工业阀门.闸阀.旁路装置 |
(Industrial valves. Gate valve. By-pass.) |
| NF E29-401-1996 |
工业阀门.多圈旋转阀门驱动器附件 |
(Industrial valves. Multi-turn valve actuator attachments.) |
| NF E29-402-2001 |
工业阀门.部分回转阀门致动器附件 |
(Industrial valves - Part-turn valve actuator attachments.) |
| NF E29-408-1992 |
工业用阀门.电力驱动器.规范 |
(INDUSTRIAL VALVES. ELECTRIC ACTUATORS. SPECIFICATIONS.) |
| NF E29-409-1992 |
工业阀门.气动的和液压的促动器.规范 |
(INDUSTRIAL VALVES. PNEUMATIC AND HYDRAULIC ACTUATORS. SPECIFICATIONS.) |
| NF E29-413-1989 |
工业阀门.安全阀流量计算.其他方法 |
(INDUSTRIAL VALVE. SAFETY VALVES AND BURSTING DISC(S) DEVICES. CALCULATION OF THEORETICAL FLOWRATE.) |
| NF E29-414-1992 |
工业阀门.安全阀门.安全阀门类型S,G1,L1和L2流率计算示例 |
(INDUSTRIAL VALVES. SAFETY VALVES. EXAMPLES FOR FLOWRATE CALCULATION OF SAFETY VALVES TYPES S,G1,L1 AND L2.) |
| NF E29-415-1990 |
工业阀门.安全阀.G平方型安全阀排出空气当量流量计算实例.GPL标准蓄水池的应用 |
(INDUSTRIAL VALVES. SAFETY VALVES. CALCULATION OF AIR EQUIVALENT FLOW CAPACITY FOR SAFETY VALVES OF TYPE G2. APPLICATION FOR STANDARD VESSELS FOR GPL.) |
| NF E29-417-2-2003 |
过压保护安全设备.第2部分:防爆盘安全设备 |
(Safety devices for protection against excessive pressure - Part 2 : bursting disc safety devices.) |
| NF E29-420-1985 |
工业阀门.安全阀.技术说明书样式和协调证明书 |
(INDUSTRIAL VALVES. SAFETY AND RELIEF VALVES. MODEL OF TECHNICAL SPECIFICATIONS AND CONFORMITY CERTIFICATE.) |
| NF E29-421-1987 |
工业阀门.安全阀.安全膜.为获得工作特性的安装规范 |
(Industrial valves. Safety valves. Bursting discs.) |
| NF E29-425-1987 |
工业阀门.防爆膜装置.定义.一般设计.试验.分类.标记.调节 |
(Industrial valves. Bursting discs devices. Definitions. General design. Test. Classification. Marking. Conditioning.) |
| NF E29-430-1998 |
工业阀门.金属蝶型阀门 |
(Industrial valves. Metallic butterfly valves.) |
| NF E29-440-1992 |
水蒸气自动排泄阀.分类.(欧洲标准 EN 26704) |
(Automatic steam traps. Classification.) |
| NF E29-441-1992 |
水蒸气自动排泄阀.标记(欧洲标准EN26553) |
(Automatic steam traps. Marking.) |
| NF E29-442-1992 |
带法兰盘的汽水自动分离器.间距尺寸 |
(Flanged automatic steam traps. Face-to-face dimensions.) |
| NF E29-443-1992 |
水蒸气自动排泄阀.产品试验和功能特性试验(欧洲标准 EN 26948) |
(Automatic steam traps. Production and performance characteristics tests.) |
| NF E29-444-1992 |
汽水自动分离器.蒸汽损耗的测定.试验方法 |
(Automatic steam traps. Determination of steam loss. Test methods.) |
| NF E29-445-1992 |
水蒸气自动排泄阀.流量测定.试验方法.(欧洲标准 EN 27842) |
(Automatic steam traps. Determination of discharge capacity. Test methods.) |
| NF E29-453-2000 |
工业过程控制阀门 |
(Industrial process control valves.) |
| NF E29-465-1986 |
工业阀门.旋转阀.铜铝球阀.规范 |
(INDUSTRIAL VALVES. CUPRO-ALUMINIUM BALL VALVES. SPECIFICATION.) |
| NF E29-466-1987 |
工业阀门.旋转阀.黄铜球阀.规范 |
(INDUSTRIAL VALVES. BRASS BALL-VALVES. SPECIFICATIONS.) |
| NF E29-480-1994 |
地下热水管网的预隔热管道系统.钢制供水管道、聚氨基甲酸乙酯热绝缘材料及高密度聚乙烯外壳的钢阀门组件(欧 |
(Preinsulated bonded pipe systems for underground hot water networks. Steelvalve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.) |
| NF E29-492-2002 |
工业阀门.金属材料的薄片阀 |
(Industrial valves - Diaphragm valves made of metallic materials.) |
| NF E29-531-1981 |
管道.凸肩对接的螺纹连接管.标准压力10 |
(Pipework. Threaded fittings with gasket on shoulder.) |
| NF E29-539-1981 |
管道.采暖设备上的球锥连接螺纹连接管部件.标准压力16 |
(Pipework. Screwed connecting part with a spheroconical function for heating plants.) |
| NF E29-551-1939 |
钢制气体螺距的连接管.双接头 |
(STEEL CONNECTIONS WITH GAS THREAD. DOUBLE NIPPLES.) |
| NF E29-552-1936 |
钢制气体螺距的连接管.套筒和连接螺帽 |
(STEEL CONNECTIONS WITH GAS THREAD. SOCKET AND JOINT NUT.) |
| NF E29-553-1936 |
钢制气体螺距的连接管.T形管 |
(STEEL CONNECTIONS WITH GAS THREAD. TEES.) |
| NF E29-554-1936 |
钢制气体螺距的连接管.全图 |
(STEEL CONNECTIONS WITH GAS THREAD. OVERALL VIEW.) |
| NF E29-571-1957 |
非金属软管用的螺纹连接管(喷淋用等) |
(SCREWED CONNECTIONS FOR NON-METALLIC FLEXIBLE HOSE (HOSE FOR WATERING ETC.).) |
| NF E29-572-1969 |
对称半边连接管(吉耶曼系统).公称压力16 |
(QUARTER TURN CONNECTIONS (GUILLEMIN SYSTEM). NOMINAL PRESSURE PN 16.) |
| NF E29-573-1988 |
工业管道.“特快“连接管，公称压力”10 |
(Industrial pipework. “Express“ connections. Maximum permissible working pressure 1 MPa (10 bar).) |
| NF E29-577-1978 |
管道.工具和气动机械用的螺纹连接管 |
(PIPEWORKS. SCREWED CONNECTIONS FOR PNEUMATIC TOOLS AND MACHINES.) |
| NF E29-591-1-1998 |
铜和铜合金.管道配件.第1部分:铜管毛细管终端焊接配件 |
(Copper and copper alloys. Plumbing fittings. Part 1 : fittings with ends for capillary soldering or capillary brazing to copper tubes.) |
| NF E29-591-2-1998 |
铜和铜合金.管道配件.第2部分:用于铜管的压缩终端配件 |
(COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 2 : FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES. (EUROPEAN STANDARD EN 1254-2).) |
| NF E29-591-3-1998 |
铜和铜合金.管道配件.第3部分:用于塑料管的压缩终端配件 |
(COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 3 : FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTICS PIPES. (EUROPEAN STANDARD EN 1254-3).) |
| NF E29-591-4-1998 |
铜和铜合金.管道配件.第4部分:用毛细或压缩终端连接于其它终端的配件 |
(COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 4 : FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS. (EUROPEAN STANDARD EN 1254-4).) |
| NF E29-591-5-1998 |
铜和铜合金.管道配件.第4部分:铜管毛细管钎焊短末端配件 |
(COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 5 : FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES. (EUROPEAN STANDARD EN 1254-5).) |
| NF E29-600-1987 |
工业管道.钢制连接管和螺塞.插接式焊接连接管.螺纹连接管和螺塞 |
(Industrial pipework. Steel fittings and plugs. Socket welding fittings.) |
| NF E29-645-1-1999 |
可运输储气瓶.气体和气体混合物.第1部分:纯气体的特性 |
(Transportable gas cylinders. Gases and gas mixtures. Part 1 : properties of pure gases.) |
| NF E29-645-2-1997 |
可运输的煤气瓶.气体和气体混合物.第2部分:气体和气体混合物的潜在易燃性和氧化能力的测定 |
(Transportable gas cylinders. Gases and gas mixtures. Part 2 : determination of flammability and oxidizing ability of gases and gas mixtures.) |
| NF E29-648-2-2001 |
可移动式液化气钢瓶.内有气体的钢瓶和阀材料的配合性.第2部分:非金属材料 |
(Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2 : non-metallic materials.) |
| NF E29-648-3-1998 |
可运输气瓶.气瓶和含气阀门材料的可兼容性.第3部分:有氧环境中自燃试验 |
(Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Part 3 : autogenous ignition test in oxygen atmosphere.) |
| NF E29-650-1992 |
气瓶.阀出口连接 |
(Gas cylinders. Valve outlet connections.) |
| NF E29-661-1979 |
氯瓶上的锻钢阀门(最大容量60kg).公称压力25 |
(FORGED-STEEL VALVES FOR CHLORINE CYLINDERS (MAX.CAPACITT 60 KG). NOMINAL PRESSURE PN 25.) |
| NF E29-662-1979 |
呼吸保护装置的压缩气瓶的阀门.使用压力200bar.尺寸特性.标记 |
(VALVES FOR COMPRESSED AIR CYLINDERS FOR RESPIRATORY PROTECTIVE EQUIPMENT. SERVICE PRESSURE 200 BAR. DIMENSIONAL CHARACTERISTICS. MARKING.) |
| NF E29-663-1979 |
呼吸保护装置的压缩气瓶的阀门.使用压力300bar.尺寸特性.标记 |
(VALUES FOR COMPRESSED AIR CYLINDERS FOR RESPIRATORY PROTECTIVE EQUIPMENT. SERVICE PRESSURE 300 BAR. DIMENSIONAL CHARACTER & STICS. MARKING.) |
| NF E29-664-1979 |
气瓶阀门出口.标准化提供的和使用中的装置对照表 |
(VALVE OUTLETS FOR GAS CYLINDERS. LIST OF STANDARD PROVISIONS OR THOSE IN USE.) |
| NF E29-670-1998 |
可运输储气瓶.储气瓶阀门配件 |
(Transportable gas cylinders. Fitting of valves to gas cylinders.) |
| NF E29-671-1981 |
气瓶.阀门装配锥体.总则 |
(Gas cylinders. Taper screw thread for value stem and cylinder neck assembly. General.) |
| NF E29-672-1-1999 |
气瓶.气瓶阀门连接用17E锥螺纹.第1部分:规范 |
(Gas cylinders. 17E taper thread for connection of valves to gas cylinders. Part 1 : specifications.) |
| NF E29-672-2-1999 |
气瓶.阀门与气瓶的连接用17E锥螺纹.第2部分:检验量规 |
(Gas cylinders. 17E taper thread for connection of valves to gas cylinders. Part 2 : inspection gauges.) |
| NF E29-674-1-1996 |
可运输气瓶.阀与气瓶连接用25E锥形螺纹.第1部分:规范 |
(Transportable gas cylinders. 25E taper thread for connection of valves to gas cylinders. Part 1 : specification.) |
| NF E29-674-2-1996 |
可运输气瓶.阀与气瓶连接用25E锥形螺纹.第2部分:量规检查 |
(Transportable gas cylinders. 25E taper thread for connection of valves to gas cylinders. Part 2 : gauge inspection.) |
| NF E29-677-1981 |
气瓶.阀门装配锥体.公称直径28.3.锥度3/25.螺距1.814惠氏螺纹.检验规范 |
(GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER : 28,3. TAPER 3/25. 14 TPI SI. GAUGE REQUIREMENTS.) |
| NF E29-678-1980 |
气瓶.气瓶阀门颈装配螺纹锥体.公称直径16.4.锥度3/20.螺距14国际单位制 |
(GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER 16,4,TAPER 3/20,14 TPI SI.) |
| NF E29-679-1981 |
气瓶.气瓶阀门颈装配锥体.公称直径16.4.锥度3/20.螺距14国际单位制.量规要求 |
(GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER 16.4. TAPER 3/20. 14 TPI SI. GAUGE REQUIREMENTS.) |
| NF E29-680-1980 |
气瓶.阀杆和瓶颈组件用锥螺纹.公称直径25.8.锥度3/26(6°38`).螺距1.814国际单位制 |
(GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER 25,8,TAPER 3/26 (6 DEGREES 38`,14 TPI SI) |
| NF E29-681-1981 |
气瓶.阀杆和瓶颈组件用锥螺纹.公称直径25.8.锥度3/26(6°C 38`).螺距1.814国际单位制.量规要求 |
(GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER 25,8. TAPER 3/26 (6 DEGREES C 38`). 14 TP1 SI. GAUGE REQUIREMENTS.) |
| NF E29-682-1980 |
气瓶.阀杆和瓶颈组件用锥螺纹.公称直径34.锥度8.732％(5°).螺距为2国际单位制 |
(GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CULINDER NECK ASSEMBLY. NOMINAL DIAMETER 34 TAPER 8 732 PER CENT (5 DEGREES),PITCH 2 SI.) |
| NF E29-683-1981 |
气瓶.阀杆和瓶颈组件用锥螺纹.公称直径34.锥度8.736％(5°C).螺距为2国际单位制.量规要求 |
(GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER 34. TAPER 8.736 PER CENT (5 DEGREES C). PITCH 2 SI. GAUGE ERQUIREMENTS.) |
| NF E29-684-1980 |
气瓶.阀杆和瓶颈组件用锥螺纹.公称直径26.锥度1/16(3°34`).螺距为1.814锥管螺纹 |
(GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER 26,TAPER 1/16 (3 DEGREES 34`),14 TPI NPT.) |
| NF E29-685-1981 |
气瓶.阀杆和瓶颈组件用锥螺纹.公称直径26.锥度1/16(3°34`).螺距为1.814锥管螺纹.量规要求 |
(GAS CYLINDERS. TAPER SCREW THREAD FOR VALVE STEM AND CYLINDER NECK ASSEMBLY. NOMINAL DIAMETER 26. TAPER 1/16 (3 DEGREES 34`). 14 TPI NPT. GAUGE REQUIREMENTS.) |
| NF E29-686-1-2002 |
储气瓶.连接储气瓶阀门的平行螺纹.第1部分:规范 |
(Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification.) |
| NF E29-686-2-2002 |
储气瓶.连接储气瓶阀门的平行螺纹.第2部分:量规检验 |
(Gas cylinders - Parallel threads for correction of valves to gas cylinders - Part 2 : Gauge inspection.) |
| NF E29-690-1996 |
可运输气瓶.气瓶阀.规范和型式试验(EN 849) |
(Transportable gas cylinders. Cylinder valves. Specification and type testing.) |
| NF E29-690/A1-1999 |
NF EN 849-1996的修改件1 |
() |
| NF E29-690/A2-2001 |
可移动的燃气瓶.燃气瓶阀门.规范和型式试验 |
(Transportable gas cylinders - Cylinder valves - Specification and type testing.) |
| NF E29-6901-1999 |
1996年NF E 29-690的补充件1(EN 849的补充件1) |
() |
| NF E29-691-1996 |
可运输气瓶.工业和医用气瓶用阀保护帽和阀罩.设计,安装和试验 |
(Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests.) |
| NF E29-691/A1-1999 |
可运输储气瓶.工业用和医用储气瓶用阀保护帽和阀护罩.设计、结构和试验 |
(Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests.) |
| NF E29-691/A2-2000 |
便携式气瓶.工业和医用气瓶用阀门保护装置.设计,结构和试验 |
(Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests.) |
| NF E29-692-1-2001 |
气瓶.微电子工业用气瓶阀接头.第1部分:输出口接头 |
(Gas cylinders - Gas cylinder valve connections for use in the micro-electronics industry - Part 1 : outlet connections.) |
| NF E29-692-2-2001 |
气瓶.微电子工业用气瓶阀接头.第2部分:气瓶阀接头的规范和型式试验 |
(Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 2 : specification and type testing for valve to cylinder connections.) |
| NF E29-693-1-2001 |
气体钢瓶.压缩呼吸空气的气体钢瓶的出口连接.第1部分:轭型连接 |
(Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1 : Yoke type connections.) |
| NF E29-693-2-2001 |
气体钢瓶.压缩呼吸空气的气体钢瓶的出口连接.第2部分:螺纹连接 |
(Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2 : threaded connections.) |
| NF E29-693-3-2001 |
气体钢瓶.压缩呼吸空气的气体钢瓶的出口连接.第3部分:230巴阀门适配器 |
(Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3 : adaptor for 230 bar valves.) |
| NF E29-694-2001 |
可运输气瓶.气瓶阀门.生产试验和检验 |
(Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections.) |
| NF E29-695-2001 |
可运输气瓶.不可再充填的气瓶用阀门.规范和原型试验 |
(Transportable gas cylinders - Cylinders valves for non-refillable cylinders - Specification and prototype testing.) |
| NF E29-720-1974 |
真空技术.高真空连接件.基本原理 |
(VACUUM TECHNOLOGY. HIGH VACUUM CONNECTIONS. BASIC PRINCIPLES) |
| NF E29-721-1974 |
真空技术.高真空用法兰盘.尺寸 |
(VACUUM TECHNOLOGY. HIGH VACUUM FLANGES. DIMENSIONS) |
| NF E29-722-1974 |
真空技术.高真空管颈用旋转法兰盘.装配环形件.尺寸 |
(VACUUM TECHNOLOGY. HIGH VACUUM ROTATABLE FLANGES FOR USE WITH COLLARS. COLLAR RETAINING RINGS. DIMENSIONS) |
| NF E29-723-1974 |
真空技术.高真空管颈.尺寸 |
(VACUUM TECHNOLOGY HIGH VACUUM COLLARS. DIMENSIONS) |
| NF E29-724-1974 |
真空技术.高真空带卡箍的快速连接管.尺寸 |
(VACUUM TECHNOLOGY. CLAMPED TYPE QUICK RELEASE COUPLINGS FOR HIGH VACUUM. DIMENSIONS) |
| NF E29-726-1974 |
真空技术.真空管道用钢管.尺寸 |
(VACUUM TECHNOLOGY. STEEL TUBES FOR VACUUM PIPES. DIMENSIONS) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com