5分钟获取标准报价 咨询电话:010-6973-5438 QQ:31794-7760 MSN:wwtrans#126.com
首页 ANSI ASME API ASTM IEEE ISA DIN BS ISO NF JIS EN

 

NF——法国标准化协会标准翻译目录查询

宽天下
咨询热线:010-6973-5438
标准号
中文名称
英文名称
 NF T54-900-2003  塑料管道和导管系统.用外推法测定热塑性塑料管道的长期静液压强度  (Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation.)
 NF T54-901-1995  塑料管道系统.非压力设备用热塑管道系统.不透水性试验方法(欧洲标准EN 1053)  (Plastics piping systems. Thermoplastics piping systems for non-pressure applications. Test method for watertightness.)
 NF T54-902-1995  塑料管道系统.土壤和废料排出用热塑管道系统.粘接处密封度试验方法  (Plastics piping systems. Thermoplastics piping systems for soil and waste discharge. Test method for airtightness of joints.)
 NF T54-903-1996  塑料管道系统.建筑物内排水管用热塑制管道系统.可载温度负荷的检验方法  (Plastics piping systems. Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for resistance to elevated temperature cycling.)
 NF T54-904-1996  塑料管线和管道系统.塑料管和配件.暴露在直接(自然)风化的方法  (PLASTICS PIPING AND DUCTING SYSTEMS. PLASTICS PIPES AND FITTINGS. METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING. (EUROPEAN STANDARD EN 1056).)
 NF T54-905-2002  塑料管道系统.热塑性压力管用端部承载或非端部承载组件和接头.内部水压下长期无漏损的试验方法  (Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure.)
 NF T54-906-1996  塑料管道系统.埋置非压管道设备用热塑管道系统.弹性密封环型接头耐泄漏性试验方法  (Plastics piping systems. Thermoplastics piping systems for buried non-pressure applications. Test methods for leaktightness of elastomeric sealing ring type joints.)
 NF T54-908-1997  流体传输用热塑管.抗快速破裂扩展性(RCP)的测定.实物试验(欧洲标准EN ISO 13478)  (THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS. DETERMINATION OF RESISTANCE TO RAPID CRACK PROPAGATION (RCP). FULL-SCALE TEST (FST). (EUROPEAN STANDARD EN ISO 13478).)
 NF T54-909-1997  流体传输用聚烯烃管.抗破裂扩展性的测定.有凹口的管上裂纹缓慢增长的试验方法(切口试验)(欧洲标准EN ISO 13  (POLYOLEFIN PIPES FOR THE CONVEYANCE OF FLUIDS. DETERMINATION OF RESISTANCE TO CRACK PROPAGATION. TEST METHOD FOR SLOW CRACK GROWTH ON NOTCHED PIPES (NOTCH TEST). (EUROPEAN STANDARD EN ISO 13479).)
 NF T54-910-1996  塑料管和防护管系统.热塑塑料管.用梯级法测定抗外冲击应力的能力  (PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS PIPES. DETERMINATION OF RESISTANCE TO EXTERNAL BLOWS BY THE STAIRCASE METHOD. (EUROPEAN STANDARD EN 1411).)
 NF T54-911-1995  热塑管道.潜伸率的测定  (THERMOPLASTICS PIPES. DETERMINATION OF CREEP RATIO. (EUROPEAN STANDARD EN ISO 9967).)
 NF T54-912-1995  热塑.管道.环硬性的测量  (THERMOPLASTICS. PIPES. DETERMINATION OF RING STIFFNESS. (EUROPEAN STANDARD EN ISO 9969).)
 NF T54-913-1996  塑料管道及保护管系统.热塑管.环形挠形测定  (PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS PIPES. DETERMINATION OF RING FLEXIBILITY. (EUROPEAN STANDARD EN 1446).)
 NF T54-914-1-2000  建筑物内污物和污水排放(低、高温)用塑料管道系统.丙烯腈-丁二烯-苯乙烯共聚物.第1部分:管道,配件和系统规  (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1 : requirements for pipes, fittings and th)
 NF T54-915-1-2000  建筑物内土和废物排放(高温和低温)用结构壁管的塑料管道系统.未增塑聚氯乙烯管(PVC-U).第1部分:管道和系统  (Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : specifications for p)
 NF T54-917-1-2000  建筑物内污物和污水排放(低、高温)用塑料管道系统.聚乙烯(PE).第1部分:管道,配件和系统规范  (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1 : specifications for pipes, fittings and the system.)
 NF T54-918-1-1999  建筑物内污物和污水排放(低、高温)用塑料管道系统.苯乙烯共聚物混合物(SAN+PVC).第1部分:管道,配件和系统规  (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN + PVC) - Part 1 : specifications for pipes, fittings and the system.)
 NF T54-919-1-1999  建筑物内污物和污水排放(低、高温)用塑料管道系统.氯化聚氯乙烯(PVC-C).第1部分:管道,配件和系统规范  (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1 : specifications for pipes, fittings and the system.)
 NF T54-920-1997  塑料管道系统.聚乙烯管道系统用阀门.在工作机构弯头处和弯头之后的防漏试验方法(欧洲标准EN 1680)  (Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanism.)
 NF T54-921-1997  塑料管道系统.热塑阀门.弯曲下温度周期变化后阀门完好性的测试方法  (Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after temperature cycling under bending.)
 NF T54-922-1997  塑料管道系统.聚乙烯放液T形管.组装放液T形管耐冲击的试验方法(欧洲标准EN 1716)  (Plastics piping systems. Polyethylene (PE) tapping tees. Test method for impact resistance of an assembled tapping tee.)
 NF T54-923-2000  塑料管道系统.与未增塑聚氯乙烯管一起使用的未增塑聚氯乙烯弹性密封环式套筒接头.负压下密封试验法  (Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure.)
 NF T54-924-1999  塑料管道系统.未增塑聚(氯乙烯)(PVC-U)配件和材料.依据总氯含量的PVC含量的估计方法(EN 1905)  (Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material. Method for assessment of the PVC content based on total chlorine content.)
 NF T54-925-1999  塑料管道系统.热塑螺旋成型承重管道.接缝处抗拉强度的测定  (PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS SPIRALLY-FORMED STRUCTURED-WALL PIPES. DETERMINATION OF THE TENSILE STRENGTH OF A SEAM. (EUROPEAN STANDARD EN 1979).)
 NF T54-926-2000  热塑性管道系统.地下常压排污设施用接头.用密封压力评定法测定带热塑性弹性体(TPE)密封件接头的长期密封性  (Thermoplastics piping systems - Joints for buried non-pressure sewage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the)
 NF T54-927-1999  塑料管道系统.热塑配件.冲击强度的试验方法(EN 12061)  (PLASTICS PIPING SYSTEMS. THERMOPLASTICS FITTINGS. TEST METHOD FOR IMPACT STRENGTH. (EUROPEAN STANDARD EN 12061).)
 NF T54-928-1997  塑料管道系统.雨水排放管道系统用托架.托架强度的测试方法 12095)  (Plastics piping system. Brackets for rainwater piping systems. Test method for bracket strength.)
 NF T54-929-1997  塑料管道系统:聚乙烯管用材料和件.挥发物含量测定  (Plastics piping systems. Polyethylene piping materials and components. Determination of volatile content.)
 NF T54-930-1997  塑料管道系统.聚乙烯(PE)阀.支架间耐弯曲试验方法  (Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports.)
 NF T54-931-1997  塑料管道系统.聚乙烯(PE)管.挤出后耐内压试验方法  (PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) PIPES. TEST METHOD FOR THE RESISTANCE TO INTERNAL PRESSURE AFTER APPLICATION OF SQUEEZE-OFF. (EUROPEAN STANDARD EN 12106).)
 NF T54-932-1997  塑料管道系统.注模热塑配件配件、阀和附属设备.管道件注模用热塑材料长期液压强度的测定  (Plastics piping systems. Injection-moulded thermoplastics fittings, valves and ancillary equipment. Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components.)
 NF T54-934-1997  塑料管道系统.管件,阀和附件.气流率/压降关系的测定  (Plastics piping systems. Fittings, valves and ancillaries. Determination of gaseous flow rate/pressure drop relationships.)
 NF T54-935-1997  塑料管道系统.比色法测定热塑材料的含水量  (Plastics piping systems. Determination of moisture content in thermoplastics by coulometry.)
 NF T54-936-1997  塑料管道系统.聚乙烯(PE)阀.耐热循环试验方法(欧洲标准EN 12119)  (Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to thermal cycling.)
 NF T54-937-2000  塑料管道系统.与未增塑聚氯乙烯管一起使用的弹性密封环式套筒接头.内压下角度偏转密封试验法  (Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with ang)
 NF T54-939-1998  塑料管道系统.热塑塑料配件.组装配件的机械拉伸强度或柔韧性的试验方法  (Plastics piping systems. Thermoplastics fittings. Test method for mechanical strength or flexibility of fabricated fittings.)
 NF T54-940-1999  塑料管道系统.冷热水输送用热塑性管和配件.安装组件耐温度循环的试验方法  (PLASTICS PIPING SYSTEMS. THERMOPLASTICS PIPES AND FITTINGS FOR HOT AND COLD WATER. TEST METHOD FOR THE RESISTANCE OF MOUNTED ASSEMBLIES TO TEMPETARURE CYCLING. (EUROPEAN STANDARD EN 12293).)
 NF T54-941-1999  塑料管道系统.热水和冷水系统.真空密封性的检验方法  (Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum.)
 NF T54-942-1999  塑料管道系统.输送热水和冷水用的热塑管和附属配件.连接件对压力变化负载的稳定性的检测方法  (Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling.)
 NF T54-945-1998  压力下流体运输用塑料管.Miner法则.累积损伤的计算方法  (PLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS UNDER PRESSURE. MINER`S RULE. CALCULATION METHOD FOR CUMULATIVE DAMAGE. (EUROPEAN STANDARD EN ISO 13760).)
 NF T54-946-2003  工业用塑料管道系统.聚丁烯(PE)、聚乙烯(PE)和聚丙烯(PP).件和系统规范.米制系列  (Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system - Metric series.)
 NF T54-949-2003  翻新用塑料管道系统的分类和设计指南  (Guidance on the classification and design of plastics piping systems used for renovation.)
 NF T54-955-1-2002  热塑管.拉伸特性的测定.第1部分:一般试验方法  (Thermoplastics pipes - Determination of tensile properties - Part 1 : general test method.)
 NF T54-956-2003  塑料管道系统.塑料管道和配件.暴露于自然风化下的方法  (Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (naturel) weathering.)
 NF T54-965-2003  气态燃料供应用塑料管道系统.聚乙烯(PE).管的包装、存储、搬运和运输用规范  (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Specifications for the packaging, the storage, the handling and the transportation of the pipes.)
 NF T56-001-1980  软和硬微孔塑料词汇  (Vocabulary of rigid and flexible cellular plastics.)
 NF T56-101/A1-1997  NF T56-101-1976的补充件 A1  ()
 NF T56-1011-1997  NF T56-101-1975的补充件1  ()
 NF T56-102-1976  合成橡胶或塑料微孔制品.硬微孔材料的弯曲试验  (ELASTOMER OR PLASTICS BASED CELLULAR PRODUCTS. BENDING TEST ON RIGID CELLULAR MATERIALS.)
 NF T56-103-1979  橡胶或塑料微孔材料.硬微孔材料抗拉特性的测定  (CELLULAR MATERIALS BASED ON RUBBER OR PLASTICS. DETERMINATION OF TENSILE PROPERTIES OF RIGID CELLULAR MATERIALS.)
 NF T56-104-1978  橡胶或塑料微孔材料.硬微孔材料抗常规穿孔应力的测定  (RUBER OR PLASTICS BASED CELLULAR PRODUCTS. DETERMINATION OF PUNCHING PROOF STRESS OF RIGID CELLULAR MATERIALS.)
 NF T56-106-1979  橡胶或塑料微孔材料.硬微孔材料在70℃时水分和其它挥发性物质含量的测定  (CELLULAR MATERIALS BASED ON RUBBER OR PLASTICS. DETERMINATION OF THE CONTENT OF WATER AND OTHER MATERIALS VOLATILE AT 70 DEGREES C IN RIGID CELLULAR MATERIALS.)
 NF T56-107-1995  泡沫橡胶和塑料.表观密度的测定  (Cellular plastics and rubbers. Determination of apparent (bulk) density.)
 NF T56-108-1979  橡胶或塑料微孔材料.软微孔材料断裂伸长度和抗拉力强度的测定  (RUBBER OR PLASTICS CELLULAR MATERIALS. DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK FOR FLEXIBLE CELLULAR MATERIALS.)
 NF T56-109-1995  软质泡沫聚合材料.抗撕裂强度的测定  (Flexible cellular polymeric materials. Determination of tear strength.)
 NF T56-110-1-1998  多孔柔软聚合材料.压缩拉伸特性的测定.第1部分:低密度材料  (Polymeric materials, cellular flexible. Determination of stress-strain characteristic in compression. Part 1 : low-density materials.)
 NF T56-110-2-1998  泡沫柔性聚合材料.压缩应力应变特性的测定.第2部分:高密度材料  (Flexible cellular polymeric materials. Determination of stress-strain characteristics in compression. Part 2 : high-density materials.)
 NF T56-111-2002  柔性多孔聚合材料.硬度的测定(压痕技术)  (Flexible cellular polymeric materials - Determination of hardness (indentation technique).)
 NF T56-112-2001  柔性多孔聚合材料.压缩永久变形的测定  (Flexible cellular polymeric materials - Determination of compression set.)
 NF T56-113-1998  多孔柔软聚合材料.在连续压降下空气流量值评估的测定  (POLYMERIC MATERIALS, CELLULAR FLEXIBLE. METHOD OF ASSESSMENT OF AIR FLOW VALUE AT CONSTANT PRESSURE-DROP. (EUROPEAN STANDARD EN ISO 7231).)
 NF T56-115-1995  软质泡沫聚合材料.用定载冲击法测定疲劳试验  (Flexible cellular polymeric materials. Determination of fatigue by constant-load pounding.)
 NF T56-116-1979  橡胶或塑料微孔材料.软微孔材料长久压痕负荷静力疲劳试验  (RUBBER OR PLASTICS CELLULAR MATERIALS. STATIC FATIGUE TEST UNDER CONSTANT INDENTATION FORCE FLEXIBLE CELLULAR MATERIALS.)
 NF T56-117-1979  橡胶或塑料微孔材料.软和硬微孔塑料加速老化试验  (RUBBER OR PLASTIC CELLULAR PRODUCTS. ACCELERATED AGEING TESTS. RIGID AND FLEXIBLE CELLULAR PRODUCTS.)
 NF T56-119-1995  泡沫塑料和橡胶.线性尺寸的测定  (Cellular plastics and rubbers. Determination of linear dimensions.)
 NF T56-120-1987  硬多孔塑料.压缩蠕变测定  (Cellular plastics, rigid. Determination of compressive creep.)
 NF T56-121-1983  硬微孔塑料.板状硬塑制品平均线性尺寸的测定  (Determination of the average linear dimensions of rigid cellular products in sheet form.)
 NF T56-122-1984  橡胶或塑料微孔制品.永久变形的测定.无负荷试验  (Rubber or plastics based materials. Determination of residual deformation. Test without stress.)
 NF T56-122/A1-1997  NF T56-122-1984的补充件 A1  ()
 NF T56-1221-1997  NF T56-122-1984的补充件1  ()
 NF T56-123-1974  合成橡胶或塑料微孔制品.微孔材料在一定时间内吸水性的测定  (CELLULAR PRODUCTS OF ELASTOMER OR PLASTICS. DETERMINATION OF WATER ABSORPTION OF CELLULAR MATERIALS OVER A GIVEN PERIOD OF TIME.)
 NF T56-123/A1-1997  NF T56-123-1974的补充件 A1  ()
 NF T56-1231-1997  NF T56-123-1974的补充件1  ()
 NF T56-125-2002  软质泡沫聚合材料.小试样对小火焰水平方向燃烧特性的实验室评估  (Flexible cellular polymeric materials - Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame.)
 NF T56-126-1995  泡沫橡胶和塑料.动态弹性的测定  (Cellular rubbers and plastics. Determination of dynamic cushioning performance.)
 NF T56-127-1995  泡沫柔性聚合材料.气流透过率的测定  (Polymeric materials, cellular flexible. Determination of air flow permeability.)
 NF T56-128-1977  橡胶或塑料硬微孔材料.硬材料中等线性收缩系数的测定  (RIGID RUBBER OR PLASTICS BASED CELLULAR MATERIALS. DETERMINATION OF THE MEAN COEFFICIENT OF LINEAR CONSTRUCTION.)
 NF T56-129-1995  泡沫塑料.硬质材料开口的和封闭的气室容积百分数的测定  (Cellular plastics. Determination of volume percentage of open and closed cells of rigid materials.)
 NF T56-129-2003  硬质泡沫塑料.开口和封闭气室容积百分数测定  (Rigid cellular plastics - Determination of volume percentage of open cells and closed cells.)
 NF T56-130 1-1997  NF T56-130-1984的补充件1  
 NF T56-130-1984  橡胶或塑料微孔制品.硬微孔制品横向凝聚力的测定  Rubber or plastics based cellular materials. Rigid cellular materials. Determination of the transverse cohesion.
 NF T56-130/A1-1997  NF T56-130-1984的补充件 A1  
 NF T56-1301-1997  NF T56-130-1984的补充件1  ()
 NF T56-133-2002  泡沫塑料.聚乙烯.试验方法  Cellular plastics - Polyethylene - Methods of test.
 NF T56-134-1998  多孔柔软聚合材料.弹性的测定  FLEXIBLE CELLULAR POLYMERIC MATERIALS. DETERMINATION OF RESILIENCE. (EUROPEAN STANDARD EN ISO 8307).
 NF T56-135-1998  多孔柔软聚合材料.压缩蠕变的测定  FLEXIBLE CELLULAR POLYMERIC MATERIALS. DETERMINATION OF CREEP IN COMPRESSION. (EUROPEAN STANDARD EN ISO 10066).
 NF T56-136-1999  硬质泡沫塑料.自结皮高密度材料的试验方法(EN ISO 9054)  CELLULAR PLASTICS, RIGID. TEST METHODS FOR SELF-SKINNED, HIGH DENSITY MATERIALS. (EUROPEAN STANDARD EN ISO 9054).
 NF T56-200-1988  塑料.合成橡胶和塑料微孔制品.硬微孔板.规范  Plastics. Rigid cellular materials in the form of sheets. Specification plan.
 NF T56-201-1988  塑料.合成橡胶和塑料微孔制品.硬聚苯乙烯泡沫材料模塑板.规范  (Plastics. Rigid cellular materials in the form of expanded polystyrene sheets obtained by casting. Specifications.)
 NF T56-203-1988  塑料.橡胶或塑料微孔材料.聚氨基甲酸酯硬微孔板.规范  (Plastics. Rigid cellular materials in the form of polyurethane sheets. Specifications.)
 NF T57-050-1977  玻璃织物增强塑料.调节和试验用标准大气压  (Glass reinforced plastics. Standard atmospheres for conditioning and testing .)
 NF T57-100-1973  玻璃织物增强塑料.可见缺陷定义  (PLASTICS MATERIALS REINFORCED WITH TEXTILE GLASS. DEFINITION OF VISUAL DEFECTS.)
 NF T57-103-2000  纤维增强塑料复合材料.平面方向压缩性的测定  (Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction.)
 NF T57-104-1998  织物增强塑料复合物.短束法对表面内层剪切强度的测定  Fibre-reinforced plastic composites. Determination of apparent interlaminar shear strength by short-beam method.
 NF T57-105-1998  纤维增强塑料复合材料.挠性性能的测定  (Fibre-reinforced plastic composites - Determination of flexural properties.)
 NF T57-106-1977  玻璃织物增强塑料.BARCOL硬度计法测量硬度  (Glass reinforced plastics. Measurement of hardness by means of a barcol impressor .)
 NF T57-107-1986  玻璃织物增强塑料.热水处理后性能变化的测定  (Glass-fibre-reinforced plastics. Measurement of the change of characteristics during hot water treatment.)
 NF T57-108-1979  玻璃织物增强塑料.抗冲击性能的测定.夏氏摆绳冲击法  (TEXTILE GLASS REINFORCED PLASTICS. DETERMINATION OF IMPACT STRENGTH. CHARPY METHOD.)
 NF T57-151-1978  玻璃织物增强塑料.热固性树脂拉力试件单向增强塑料板的制备  (GLASS TEXTILE REINFORCED PLASTICS. PREPARATION OF SHEETS OF THERMOSETTING RESINS WITH UNIDIRECTIONAL REINFORCEMENT FOR TENSILE TEST SPECIMENS.)
 NF T57-153-1-2002  纤维增强塑料.试验板的制备方法.第1部分:通用条件  (Fibre-reinforced plastics - Methods of producing test plates - Part 1 : general conditions.)
 NF T57-153-2-2002  纤维增强塑料.试验板的生产方法.第2部分:接触模压法和喷射成形法  (Fibre-reinforced plastics - Methods of producing test plates - Part 2 : contact and spray-up moulding.)
 NF T57-153-3-2002  纤维增强塑料.试验板的生产方法.第3部分:湿压缩模塑法  (Fibre-reinforced plastics - Methods of producing test plates - Part 3 : wet compression moulding.)
 NF T57-153-5-2002  纤维增强塑料.试验板的生产方法.第5部分:长纤维卷绕法  (Fibre-reinforced plastics - Methods of producing test plates - Part 5 : filament winding.)
 NF T57-153-6-2003  纤维增强塑料.试验用板材的生产方法.第6部分:挤拉模塑法  (Fibre-reinforced plastics - Methods of producing test plates - Part 6 : pultrusion moulding.)
 NF T57-153-7-2002  纤维增强塑料.试验板的生产方法.第7部分:树脂压铸法  (Fibre-reinforced plastics - Methods of producing test plates - Part 7 : resin transfer moulding.)
 NF T57-153-9-2003  纤维增强塑料.试验板的制备方法.第9部分:GMT/STC模制  (Fibre-reinforced plastics - Methods of producing test plates - Part 9 : moulding of GMT/STC.)
 NF T57-154-1993  玻璃织物增强塑料.通过袋模单向增强的板材的制备  GLASS-REINFORCED PLASTICS. PREPARATION OF PLATES WITH UNIDIRECTIONAL REINFORCEMENTS BY BAG MOULDING.
 NF T57-155-1998  塑料.热塑铸模化合物.SMC中纤维湿气级别测定  Plastics. Thermoset moulding compounds. Determination of the degree of fibre wet out in SMC.
 NF T57-156-1998  塑料.纤维增强化合物.SMC、BMC和DMC压缩铸模试验板的制备  (Plastics. Fibre reinforced composites. Preparation of compression moulded test plates of SMC, BMC and DMC.)
 NF T57-160-1-1994  玻璃织物增强塑料.浮法增强树脂棒机械性能的测定.第1部分:树脂棒的准备  (TEXTILE-GLASS-REINFORCED PLASTICS. DETERMINATION OF MECHANICAL PROPERTIES ON RODS MADE OF ROVING-REINFORCED RESIN. PART 1 : GENERAL CONSIDERATIONS AND PREPARATION OF RODS.)
 NF T57-160-2-1994  玻璃织物增强塑料.浮法增强树脂棒机械性能的测定.第2部分:树脂棒柔性强度的测定  (TEXTILE-GLASS-REINFORCED PLASTICS. DETERMINATION OF MECHANICAL PROPERTIES ON RODS MADE OF ROVING-REINFORCED RESIN. PART 2 : DETERMINATION OF FLEXURAL STRENGTH.)
 NF T57-160-3-1994  玻璃织物增强塑料.浮法增强树脂棒机械性能的测定.第3部分:树脂棒耐压强度的测定  (TEXTILE-GLASS-REINFORCED PLASTICS. DETERMINATION OF MECHANICAL PROPERTIES ON RODS MADE OF ROVING-REINFORCED RESIN. PART 3 : DETERMINATION OF COMPRESSIVE STRENGTH.)
 NF T57-160-4-1994  玻璃织物增强塑料.浮法增强树脂棒机械性能的测定.第4部分:树脂棒外观线性分层剪切强度的测定  (TEXTILE-GLASS-REINFORCED PLASTICS. DETERMINATION OF MECHANICAL PROPERTIES ON RODS MADE OF ROVING-REINFORCED RESIN. PART 4 : DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH.)
 NF T57-200-1973  合成玻璃管和配件.热固性材料.概论.说明书.分类.特性  (PIPES AND FITTINGS OF COMPOSITE GLASS. THERMOSETTING MATERIALS. GENERAL REVIEW. DESCRIPTION. CLASSIFICATION. CHARACTERISTICS.)
 NF T57-204-1996  塑料管道系统.玻璃增强热固性塑料(GRP)管.耐长期内部压力性能的测定  (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of long-term resistance to internal pressure.)
 NF T57-210-1994  塑料管道系统.玻璃纤维增强塑料部件.用重力法测定组分用量  (Plastics piping systems. Glass-reinforced plastics components. Determination of the amounts of constituents using the gravimetric method.)
 NF T57-211-1994  塑料管道系统.玻璃增强热固性塑料管和配件.回归分析及其使用方法  (Plastics piping sytems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Methods for regression analysis and their use.)
 NF T57-212-1994  塑料管道系统.玻璃增强热固性管子.干燥条件蠕变系数的测定  (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of the creep factor dry conditions.)
 NF T57-214-1-1998  地下排水系统和压力下污水排放的塑料管道系统.基于不饱和聚酯 树脂(UP)的玻璃增强热固塑料.第1部分:一般性(  (Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 1 : general.)
 NF T57-214-3-1996  压力下地下排水系统用塑料管道系统.不饱和聚酯树脂基玻璃增强热固塑料.第3部分:配件  Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (grp) based on unsaturated polyester resin (up). Part 3 : fittings.
 NF T57-214-5-1996  压力下地下排水系统用塑料管道系统.不饱和聚酯树脂基玻璃增强热固塑料.第5部分:接头的适用性  Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (grp) based on unsatured polyester resin (up). Part 5: fitness for purpose of the joints.
 
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102] [103] [104] [105] [106] [107] [108] [109] [110] [111] [112] [113] [114] [115] [116] [117] [118] [119] [120] [121] [122] [123] [124] [125] [126] [127] [128] [129] [130] [131] [132] [133] [134] [135] [136] [137] [138] [139] [140] [141] [142] [143] [144] [145] [146] [147] [148] [149] [150] [151] [152] [153] [154] [155] [156] [157] [158] [159] [160] [161] [162] [163] [164] [165] [166] [167] [168] [169] [170] [171] [172] [173] [174] [175] [176] [177] [178] [179] [180] [181] [182] [183] [184] [185] [186] [187] [188] [189] [190] [191] [192] [193] [194] [195] [196] [197]
宽天下翻译公司 版权所有 2008