5分钟获取标准报价 咨询电话:010-6973-5438 QQ:31794-7760 MSN:wwtrans#126.com
首页 ANSI ASME API ASTM IEEE ISA DIN BS ISO NF JIS EN

 

NF——法国标准化协会标准翻译目录查询

宽天下
咨询热线:010-6973-5438
标准号
中文名称
英文名称
 NF C28-918/A1-2002  磁性材料.第4部分:软磁材料的直流磁特性测量方法  (Magnetic materials - Part 4 : methods of measurement of d.c. magnetic properties of magnetically soft materials.)
 NF C28-920-1996  颗粒结构定向最终退火状态下的电工钢片和钢带  (Grain-oriented electrical steel sheet and strip delivered in the fully processed state.)
 NF C28-921-2003  磁性材料.开路中磁性材料矫顽力的测量方法  (Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open circuit.)
 NF C28-925-1996  非最终退火装态下非合金钢制冷轧电工钢片和钢带  (Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state.)
 NF C28-926-1996  非最终退火装态下合金钢制冷轧电工钢片和钢带  (Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state.)
 NF C28-930-1983  冶金产品.变压器磁路用切割钢板.无消耗切割  (IRON AND STEEL, MAGNETIC STEEL SHEET FOR TRANSFORMER MAGNETIC CIRCUITS. WASTELESS CUTTING.)
 NF C28-931-1998  磁性材料.第2部分:用Epstein框架法对电气钢薄板材和带材磁特性的测定方法  (Magnetic materials. Part 2 : methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame.)
 NF C28-936-2003  磁性材料.烧结的软磁性材料规范  (Magnetic materials - Specification for sintered soft magnetic materials.)
 NF C28-940-2001  在中等频率的薄磁钢带  (Thin magnetic steel strip for use at medium frequencies.)
 NF C28-941-1997  磁性材料.薄板材和带材的机械特性和磁导率的规范  (Magnetic materials. Specification for steel sheet and strip with specified mechanical properties and magnetic permeability.)
 NF C30-010-1930  导体导线退火的铜型材.规范  (CONDUCTORS. STANDARD ANNEALED COPPER : SPECIFICATION.)
 NF C30-101-2003  电缆及其附件的冲击电压试验  (Impulse tests on cables and their accessories.)
 NF C30-201-2001  电缆芯的识别登记标记  (Marking by inscription for the identification of cores of electric cables.)
 NF C30-202-2000  电缆命名系统  (System for cable designation.)
 NF C30-2021-1990  C 30-202-87的补充1  ()
 NF C30-2026-1993  导线和绝缘电缆.导线和电缆的命名系统.补充件6  ()
 NF C30-203-1994  导线和绝缘电缆.导线和绝线电缆的尺寸特性测定.计算方法  (Insulated cables and flexible cords. Determination of dimensions of insulated cables and flexible cords calculation methods.)
 NF C30-204-1988  导线和绝缘电缆.电缆标记  (INSULATED CABLES AND FLEXIBLE CORDS. MARKING OF CABLES.)
 NF C30-204/A1-1991  NF C 30-204-1988的补充件1  ()
 NF C30-2041-1991  C30-204-88的补充1  ()
 NF C30-205-1994  额定电压450/750V(含)以下的圆铜导体电缆平均外径尺寸上限和下限的计算  (Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V.)
 NF C30-400-2003  地下管道和电缆用电磁波探测器.性能和安全  (Electromagnetic locators for buried pipes and cables - Performance and safety.)
 NF C31-001-2000  特种绕组线规范.第0部分:一般要求.第1节:漆包圆铜线  (Specifications for particular types of winding wires - Part 0 : general requirements - Section 1 : enamelled round copper wire.)
 NF C31-001/A1-2001  特种绕组线规范.第0-1部分:一般要求.漆包圆铜线  (Specifications for particular types of winding wires - Part 0-1 : general requirements - Enamelled round copper wire.)
 NF C31-0012-1995  NF C31-001 95年5月的补充件2  ()
 NF C31-002-2000  特种绕组线规范.第0部分:一般要求.第2节:漆包扁铜线  (Specifications for particular types of winding wires - Part 0 : general requirements - Section 2 : enamelled rectangular copper wire.)
 NF C31-002/A1-2001  特种绕组线规范.第0-2部分:一般要求.漆包扁铜线  (Specifications for particular types of winding wires - Part 0-2 : general requirements - Enamelled rectangular copper wire.)
 NF C31-0022-1995  NF C31-002 95年5月的补充件2  ()
 NF C31-003-2000  特种绕组线规范.第0部分:一般要求.第3节:漆包圆铝线  (Specification for particular types of winding wires - Part 0 : general requirements - Section 3 : enamelled round aluminium wire.)
 NF C31-003/A1-2001  特种绕组线规范.第0-3部分:一般要求.漆包圆铝线  (Specifications for particular types of winding wires - Part 0-3 : general requirements - Enamelled round aluminium wire.)
 NF C31-0031-1995  NF C31-003 95年5月的补充件1  ()
 NF C31-0032-1995  NF C31-003 95年5月的补充件2  ()
 NF C31-004-2000  特种绕组线规范.第0部分:一般要求.第4节:玻璃纤维绕组树脂或清漆浸渍的裸铜线或漆包扁铜线  (Specifications for particular types of winding wires - Part 0 : general requirements - Section 4 : glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire.)
 NF C31-004/A1-2001  特种绕组线规范.第0-4部分:一般要求.玻璃纤维绕组树脂或清漆浸渍裸铜线或漆包扁铜线  (Specifications for particular types of winding wires - Part 0-4 : general requirements Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire.)
 NF C31-0042-1995  NF C31-004 95年5月的补充件2  ()
 NF C31-005-2000  特种绕组线规范.第0部分:一般要求.第5节:带玻璃纤维保护层的树脂或清漆浸渍的裸的或漆包扁铜线  (Specifications for particular types of winding wires - Part 0 : general requirements - Section 5 : glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire.)
 NF C31-006-2002  特种绕组线规范.第0-6部分:一般要求.玻璃丝绕包树脂或漆浸渍裸或漆包圆铜线  (Specifications for particular types of winding wires - Part 0-6 : general requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire.)
 NF C31-023-1-1997  绕线.试验方法.第1部分:总则  (Winding wires. Test methods. Part 1 : general.)
 NF C31-023-2-1998  绕阻线.试验方法.第2部分:尺寸的测定  (Winding wires. Test methods. Part 2 : determination of dimensions.)
 NF C31-023-2/A1-1998  NF EN 60851-2-1998的修改1  ()
 NF C31-023-21-1998  NF C31-023-2 98年2月的补充件1  ()
 NF C31-023-3-1998  绕阻线.试验方法.第3部分:机械性能  (Winding wires. Test methods. Part 3 : mechanical properties.)
 NF C31-023-3/A1-1998  NF EN 60851-3-1998的修改1  ()
 NF C31-023-31-1998  NF C31-023-3 98年2月的补充件1  ()
 NF C31-023-4-1998  绕组线.试验方法.第4部分:化学特性  (Winding wires. Test methods. Part 4 : chemical properties.)
 NF C31-023-4/A1-1998  NF EN 60851-4-1998的修改1  ()
 NF C31-023-41-1998  NF C31-023-4-98的补充件1  ()
 NF C31-023-5-1998  绕阻线.第5部分:电性能  (Winding wires. Test methods. Part 5 : electrical properties.)
 NF C31-023-5/A1-1998  NF EN 60851-5-1998的修改1  ()
 NF C31-023-51-1998  NF C31-023-5 98年2月的补充件1  ()
 NF C31-023-6-1998  绕阻线.试验方法.第6部分:热特性  (Winding wires. Test methods. Part 6 : thermal properties.)
 NF C31-023-6/A1-1998  NF EN 60851-6-1998的修改1  ()
 NF C31-023-61-1998  NF C 31-023-6的补充件1  ()
 NF C31-091-1995  绕组线的封装.第1部分:圆绕组线线筒  (Packaging of winding wires. Part 1 : containers for round winding wires.)
 NF C31-092-1-1995  绕组线的封装.第2部分:圆桶形输出线轴.第1节:基本尺寸  (Packaging of winding wires. Part 2 : cylindrical barrelled delivery spools. Section 1 : basic dimensions.)
 NF C31-092-2-1995  绕组线的封装.第2部分:圆桶形输出线轴.第2节:由热塑性材料制成的可回收使用的绕线轴规范  (Packaging of winding wires. Part 2 : cylindrical barreled delivery spools. Section 2 : specification for returnable spools made from thermoplastic material.)
 NF C31-092-3-1995  绕组线的封装.第2部分:圆桶形输出线轴.第3节:由热塑性材料制成的不能回收使用的绕线轴规范  (Packaging of windings wires. Part 2 : cylindrical barrelled delivery spools. Section 3 : specification for non-returnable sppols made from thermplastic material.)
 NF C31-093-1-2002  绕组线的封装.第3-1部分:锥形输出线轴.基本尺寸  (Packaging of winding wires - Part 3-1 : taper barelled delivery spools - Basic dimensions.)
 NF C31-093-2-2001  绕组线的封装.第3-2部分:锥形输出线轴.由热塑性材料制的可回收使用的绕线轴规范  (Packaging of winding wires - Part 3-2 : taper barrelled delivery spools - Specification for returnable spools from thermoplastic materials.)
 NF C31-093-3-1996  绕组线的包装.第3部分:圆锥型筒装交货线盘.第3节:热塑性材料不可回收线盘规范  (Packaging of winding wires. Part 3 : taper barrelled delivery spools. Section 3 : specification for non-returnable spools made from thermoplastic material.)
 NF C31-093-4-2001  绕组线的封装.第3-4部分:锥形输出线轴.锥形输出线轴封装物的基本尺寸  (Packaging of winding wires - Part 3-4 : taper barelled delivery spools - Dimensions of containers for taper barelled delivery spools.)
 NF C31-093-5-2001  绕组线的封装.第3部分:锥形输出线轴.由热塑性材料制成的绕线轴封装物规范  (Packaging of winding wires - Part 3 : taper barelled delivery spools - Specification for spool containers made form thermoplastic material.)
 NF C31-094-1-1996  绕组线的封装.第4部分:试验方法.第1节:热塑性材料制成的输出线轴  (Packaging of windings wires. Part 4 : methods of test. Section 1 : delivery sppols made from thermplastic material.)
 NF C31-094-2-1995  绕组线的封装.第4部分:试验方法.第2节:热固性塑料制成的锥形筒式供带盘容器  (Packaging of winding wires. Part 4 : methods of test. Section 2 : containers made from thermoplastic material for taper barrelled delivery spools.)
 NF C31-095-1-1998  绕组线的包装.第5部分第1节:装入桶内的圆柱形带锥形法兰供带盘(欧洲标准EN 60 264-5-1)  (Packaging of winding wires. Part 5-1 : cylindrical barrelled delivery spools with conical flanges. Basic dimensions.)
 NF C31-095-2-2002  绕组线的包装.第5-2部分:圆锥形筒装交货线盘.热塑材料可回收片盘规范  (Packaging of winding wires - Part 5-2 : cylindrical barrelled delivery spools wire conical flanges - Specification for returnable spools made from thermoplastic material.)
 NF C31-122-1980  电气构件中的导体.圆截面四分之三冷锻硬裸铝线.特性  (WIRES FOR ELECTRICAL MACHINERY AND APPARATUS. ROUND BARE 3/4 HARD ALUMINIUM WIRE. CHARACTERISTICS.)
 NF C31-320M1-1967  电气构件中的导体和导线.带有包皮、编织物或绝缘带的绝缘铜线  ()
 NF C31-410-1995  测定漆包绕组线温度指数的试验程序  (Test procedure for the determination of the temperature index of enamelled winding wires.)
 NF C31-410/A1-2000  测定漆包绕组线温度指数的试验规程  (Test procedure for the determination of the temperature index of enamelled winding wires.)
 NF C31-420-1977  电气构件中的导体和导线.变压器和类似装置用高介电性能的圆截面漆包铜线  (WIRES FOR ELECTRICAL MACHINERY AND APPARATUS. ENAMELLED ROUND COPPER WIRES WITH HIGH DIELECTRIC PROPERTIES FOR TRANSFORMERS AND SIMILAR APPLICATIONS.)
 NF C31-510-1976  开关板及电气接线用扁平铜条  (FLAT COPPER BARS FOR SWITCHBOARDS AND ELECTRICAL WIRINGS (WITH SHARP OR ROUNDED EDGES).)
 NF C31-520-1979  电路或仪表盘用铝和铝合金扁条线  (Flat aluminium and aluminium alloys bars for switchboards and electrical wirings (with rounded edges).)
 NF C31-651-1995  特种绕组线规范.第1部分:聚乙烯醇乙醛漆包圆铜绕组线.105级  (Specifications for particular types of winding wires. Part 1 : polyvinyl acetal enamelled round copper wire, class 105.)
 NF C31-651/A1-1998  NF EN 60317-1-1995的修改1  ()
 NF C31-651/A2-2001  特种绕组线规范.第1部分:聚乙烯醇乙醛漆包圆铜绕组线.105级  (Specifications for particular types of winding wires - Part 1 : polyvinyl acetal enamelled found copper wire, class 105.)
 NF C31-6511-1998  NF C31-651-95的补充件1  ()
 NF C31-652-2001  特种绕组线规范.第2部分:带粘合层的可焊接的聚氨基甲酸乙酯漆包圆铜绕组线,130级  (Specifications for particular types of winding wires - Part 2 : solderable polyurethane enamelled round copper wire, class 130, with a bonding layer.)
 NF C31-653-1995  特种绕组线规范.第3部分:聚酯漆包圆铜绕组线,155级  (Specifications for particular types of winding wires. Part 3 : polyester enamelled round copper wire, classe 155.)
 NF C31-653/A1-2001  特种绕组线规范.第3部分:聚酯漆包圆铜绕组线.155级  (Specifications for particular types of winding wires - Part 3 : polyester enamelled round copper wire, class 155.)
 NF C31-654-2001  特种绕组线规范.第4部分:可焊接的聚氨基甲酸乙酯漆包圆铜绕组线130级  (Specifications for particular types of winding wires - Part 4 : solderable polyurethane enamelled round copper wire, class 130.)
 NF C31-657-1995  特种绕组线规范.第7部分:聚酰亚胺漆包圆铜绕组线,220级  (Specifications for particular types of winding wires. Part 7 : polyimide enamelled round copper wire, class 220.)
 NF C31-657/A1-1998  NF EN 60317-7-1995的修改1  ()
 NF C31-657/A2-2002  特种绕组线规范.第7部分:聚酰亚胺漆包圆铜线  (Specifications for particular types of winding wires - Part 7 : polyimide enamelled round copper wire, class 220.)
 NF C31-6571-1998  NF C31-657-95的补充件1  ()
 NF C31-658-1995  特种绕组线规范.第8部分:聚酰胺酯漆包圆铜绕组线,180级  (Specifications for particular types of winding wires. Part 8 : polyesterimide enamelled round copper wire, class 180.)
 NF C31-658/A1-1998  NF EN 60317-8-1995的修改1  ()
 NF C31-658/A2-2001  特种绕组线规范.第8部分:聚酰胺酯漆包圆铜线,180级  (Specifications for particular types of winding wires - Part 8 : polyesterimide enamelled round copper wire, class 180.)
 NF C31-6581-1998  NF C31-658-95的补充件1  ()
 NF C31-661-2001  特种绕组线规范.第11部分:130级丝包束状可焊聚氨酯漆包圆铜线  (Specifications for particular types of winding wires - Part 11 : bunched solderable polyurethane enamelled round copper wires, class 130, with silk covering.)
 NF C31-6611-1995  NF C31-661-95补充件1  ()
 NF C31-662-1995  特种绕组线规范.第12部分:聚乙烯醇乙醛漆包圆铜绕组线,120级  (Specifications for particular types of winding wires. Part 12 : polyvinyl acetal enamelled round copper wire, class 120.)
 NF C31-662/A1-2001  特种绕组线规范.第12部分:聚乙烯醇乙醛漆包圆铜线,120级  (Specifications for particular types of winding wires - Part 12 : polyvinyl acetal enamelled round copper wire, class 120.)
 NF C31-663-1995  特种绕组线规范.第13部分:用聚酰胺-酰亚胺涂覆聚酯或聚酰胺酯漆包的圆铜绕组线,200级  (Specifications for particular types of winding wires. Part 13 : polyester or polyesterimide overcoated with polyamide-imide.)
 NF C31-663/A1-1998  NF EN 60317-13-1995的修改1  ()
 NF C31-663/A2-2001  特种绕组线规范.第13部分:用聚酰胺-酰亚胺涂覆聚酯或聚酰胺酯漆包的圆铜线,200级  (Specifications for particular types of winding wires - Part 13 : polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200.)
 NF C31-6631-1998  NF C31-663-95的补充件1  ()
 NF C31-664-1995  特种绕组线规范.第14部分:105级聚乙烯醇乙醛漆包圆铝绕组线  (Specifications for particular types of winding wires. Part 14 : polyvinyl acetal enamelled round aluminium wire, class 105.)
 NF C31-664/A1-2001  特种绕组线规范.第14部分:聚乙烯醇漆绝缘的圆铝线,等级105  (Specifications for particular types of winding wires - Part 14 : polyvinyl acetal enamelled round aluminium wire, class 105.)
 NF C31-665-1995  特种绕组线规范.第15部分:180级聚酰胺酯漆包圆铝绕组线  (Specifications for particular types of winding wires. Part 15 : polyesterimide enamelled round aluminium wire, class 180.)
 NF C31-665/A1-2001  特种绕组线规范.第15部分:聚酰脂亚胺漆绝缘圆铝线,等级180  (Specifications for particular types of winding wires - Part 15 : polyesterimide enamelled round aluminium wire, class 180.)
 NF C31-666-1995  特种绕组线规范.第16部分:155级聚酯漆包扁铜绕组线  (Specifications for particular types of winding wires. Part 16 : polyester enamelled rectangular copper wire, class 155.)
 NF C31-666/A1-2001  特种绕组线规范.第16部分:聚酯漆包扁铜线,155级  (Specifications for particular types of winding wires - Part 16 : polyester enamelled rectangular copper wire, class 155.)
 NF C31-667-1995  特种绕组线规范.第17部分:105级聚乙烯醇乙醛漆包扁铜绕组线  (Specifications for particular types of winding wires. Part 17 : polyvinyl acetal enamelled rectangular copper wire, class 105.)
 NF C31-667/A1-2001  特种绕组线规范.第17部分:105级聚乙烯醇乙醛漆包扁铜线  (Specifications for particular types of winding wires - Part 17 : polyvinyl acetal enamelled rectangular copper wire, class 105.)
 NF C31-668-1995  特种绕组线规范.第18部分:聚乙烯醇乙醛漆包扁铜绕组线,120级  (Specifications for particular types of winding wires. Part 18 : polyvinyl acetal enamelled rectangular copper wire, class 120.)
 NF C31-668/A1-2001  特种绕组线规范.第18部分:120级聚乙烯醇乙醛漆包扁铜线  (Specifications for particular types of winding wires - Part 18 : polyvinyl acetal enamelled rectangular copper wire, class 120.)
 NF C31-669-2001  特种绕组线规范.第19部分:涂覆聚酰胺的可焊接聚氨基甲酸乙酯漆包圆铜绕组线,130级  (Specifications for particular types of winding wires - Part 19 : solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130.)
 NF C31-670-2001  特种绕组线规范.第20部分:聚氨基甲酸乙酯镀锌漆包圆铜绕组线,155级  (Specifications for particular types of winding wires - Part 20 : solderable polyurethane enamelled round copper wire class 155.)
 NF C31-671-2001  特种绕组线规范.第21部分:涂覆聚酰胺的可焊接聚氨基甲酸乙酯漆包圆铜绕组线,155级  (Specifications for particular types of winding wires - Part 21 : solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155.)
 NF C31-672-1995  特种绕组线规范.第22部分:涂覆聚酰胺的聚酯或聚酰胺酯漆包圆铜绕组线,180级  (Specifications for particular types of winding wires. Part 22 : polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180.)
 NF C31-672/A1-2001  特种绕组线规范.第22部分:聚酰胺涂层的180级聚酯或聚酯亚胺漆包圆铜线  (Specifications for particular types of winding wires - Part 22 : polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180.)
 NF C31-673-1995  特种绕组线规范.第23部分:可焊接的聚酰胺酯漆包圆铜绕组线,180级  (Specifications for particular types of winding wires. Part 23 : solderable polyesterimide enamelled round copper wire, class 180.)
 NF C31-673/A1-2002  特种绕组线规范.第23部分:180类可焊接聚氨亚胺漆包圆铜线  (Specifications for particular types of winding wires - Part 23 : solderable polyesterimide enamelled round copper wire, class 180.)
 NF C31-674-1995  特种绕组线规范.第24部分:涂覆聚酰胺的聚酯或聚酰胺酯漆包圆铝绕组线,180级  (Specifications for particular types of winding wires. Part 24 : polyester or polyesterimide enamelled round aluminium wire overcoated with polyamide, class 180.)
 NF C31-674/A1-2001  特种绕组线规范.第24部分:聚酰胺涂层的180级聚酯或聚酯亚胺漆包圆铝线  (Specifications for particular types of winding wires - Part 24 : polyester or polyesterimide enamelled round aluminium wire overcoated with polyamide, class 180.)
 NF C31-675-1998  特种绕组线规范.第25部分:涂覆聚酰胺-酰亚胺酯的聚亚酰胺酯漆包圆铝绕组线,200级  (Specifications for particular types of winding wires. Part 25 : polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200.)
 NF C31-675/A1-1998  NF EN 60317-25-1998的修改1  ()
 NF C31-675/A2-2001  特种绕组线规范.第25部分:涂覆聚酰胺-酰亚胺酯的200级聚酯或聚酯亚胺漆包圆铝线  (Specifications for particular types of winding wires - Part 25 : polyester or polyesterimide overcoated with polyamid-imide enamelled round aluminium wire, class 200.)
 NF C31-6751-1998  NF C31-675-5 98年2月的补充件1  ()
 
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102] [103] [104] [105] [106] [107] [108] [109] [110] [111] [112] [113] [114] [115] [116] [117] [118] [119] [120] [121] [122] [123] [124] [125] [126] [127] [128] [129] [130] [131] [132] [133] [134] [135] [136] [137] [138] [139] [140] [141] [142] [143] [144] [145] [146] [147] [148] [149] [150] [151] [152] [153] [154] [155] [156] [157] [158] [159] [160] [161] [162] [163] [164] [165] [166] [167] [168] [169] [170] [171] [172] [173] [174] [175] [176] [177] [178] [179] [180] [181] [182] [183] [184] [185] [186] [187] [188] [189] [190] [191] [192] [193] [194] [195] [196] [197]
宽天下翻译公司 版权所有 2008