标准号 |
中文名称 |
英文名称 |
| NF A85-201-1990 |
限定工作用的手工电弧焊的电流源 |
(POWER SOURCES FOR MANUAL ARC WELDING WITH LIMITED DUTY. (EUROPEAN STANDARD EN 50 060).) |
| NF A85-2011-1995 |
NF A85-201-90补充件1 |
() |
| NF A85-600-1978 |
使用药皮焊条手工焊接用焊钳.安全规则.规范.类型试验 |
(ELECTRODE HOLDER FOR MANUAL ARC WELDING WITH COATED ELECTRODES SAF-ETY RULES,SPECIFICATIONS AND TESTS.) |
| NF A85-610-1984 |
电弧焊接电缆的连接装置.安全规则.规范.类型试验 |
(CONNECTORS FOR ARC WELDING CABLES. SAFETY RULES. REQUIREMENTS. TYPE TESTS. MARKING.) |
| NF A85-620-1986 |
电弧焊接.干燥箱和药皮焊条的储藏.规范和试验 |
(ELECTRIC ARC WELDING. OVENS FOR THE DRYING AND STORAGE COVERED ELECTRODES. SPECIFICATIONS AND TESTS.) |
| NF A86-310-1979 |
乙炔焊枪.定义.流量 |
(ACETYLENE NOZZLES. ATTACHMENT. FLOW RATES.) |
| NF A87-000-2003 |
热切割.热切割分类.产品几何量技术规范和质量公差 |
(Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances.) |
| NF A87-010-1973 |
铝和铝合金.焊接.边的准备 |
(ALUMINIUM AND ALUMINIUM ALLOYS. WELDING. WELD PREPARATIONS.) |
| NF A87-011-1994 |
带有电焊条的金属电弧熔焊、气体保护金属弧焊及气焊.钢接头的制备 |
(Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding. Joint preparations for steel.) |
| NF A87-012-2-2000 |
焊接.钢的基本焊接接合详图.第2部分:非内部压力器件 |
(Welding - Basic weld joint details in steel - Part 2 : non internal pressurized components.) |
| NF A87-013-2-1999 |
焊接和相关工艺.接头的预处理.第2部分:钢的埋弧焊 |
(WELDING AND ALLIED PROCESSES. JOINT PREPARATION. PART 2 : SUBMERGED ARC WELDING OF STEELS. (EUROPEAN STANDARD EN ISO 9692-2).) |
| NF A87-013-3-2001 |
焊接和相关工艺.接头预处理的推荐方法.第3部分:铝和铝合金的金属焊条惰性气体保护焊和钨极惰性气体保护焊 |
(Welding and allied processes - Recommendations for joint preparation - Part 3 : metal inert gas welding and tungsten inert gas welding of aluminium and its alloys.) |
| NF A87-021-1998 |
焊接.弧双端螺栓焊接的双端螺栓和陶瓷箍.(欧洲标准EN ISO 13918) |
(Welding. Studs and ceramic ferrules for arc stud welding.) |
| NF A87-082-1992 |
电阻凸焊 |
(Projections for resistance welding.) |
| NF A88-110-1-1992 |
焊工合格鉴定.熔焊.第1部分:钢件 |
(Approval testing of welders. Fusion welding. Part 1 : steels.) |
| NF A88-110-1/A1-1997 |
NF EN 287-1-1992的修改件1 |
() |
| NF A88-110-11-1997 |
NF A88-110-1-1992的补充件1 |
() |
| NF A88-110-2-1992 |
焊工合格鉴定.熔焊.第2部分:铝及铝合金件 |
(Approval testing of welders. Fusion welding. Part 2 : aluminium and aluminium alloys.) |
| NF A88-110-2/A1-1997 |
NF EN 287-2-1992的修改件1 |
() |
| NF A88-110-21-1997 |
NF A88-110-2-92补充件1 |
() |
| NF A88-110-3-1999 |
焊工合格鉴定.熔焊.第3部分:铜及铜合金件 |
(Approval testing of welders. Fusion welding. Part 3 : copper and copper alloys.) |
| NF A88-110-4-1999 |
焊工合格鉴定.熔焊.第4部分:镍和镍合金 |
(Approval testing of welders. Fusion welding. Part 4 : nickel and nickel alloys.) |
| NF A88-110-5-2000 |
焊工的验收试验.熔焊.第5部分:钛和钛合金.锆和锆合金 |
(Approval testing of welders - Fusion welding - Part 5 : titanium and titanium alloys, zirconium and zirconium alloys.) |
| NF A88-112-1998 |
焊接操作人员.焊接操作人员用金属材料全机械化和自动焊接用熔焊和阻焊装置验收试验 |
(Welding personnel. Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials.) |
| NF A88-121-1994 |
焊接条件.任务和责任 |
(WELDING COORDINATION. TASKS AND RESPONSIBILITIES. (EUROPEAN STANDARD EN 719).) |
| NF A88-200-1-2002 |
焊接和相关过程中的健康和安全.电弧焊接产生的烟尘和气体取样的实验室方法.第1部分:排放率测定和颗粒烟尘的 |
(Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 1 : determination of emission rate and sampling for analysis of partic) |
| NF A88-200-2-2003 |
焊接和相关工艺中的卫生和安全.对电弧焊产生的烟尘和气体取样的实验室方法.第2部分:除臭氧外气体的排放率测 |
(Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 2 : determination of emission rates of gases, except ozone.) |
| NF A88-200-3-2003 |
焊接和相关工艺中的卫生和安全.对电弧焊产生的烟尘和气体取样的实验室方法.第3部分:用固定点测量法测定臭氧 |
(Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 3 : determination of ozone concentration using fixed point measurement) |
| NF A88-202-1-2001 |
焊接和有关工艺中的健康和安全.工作人员呼吸区空气粒子和气体的取样.第1部分:气体粒子的取样 |
(Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator’s breathing zone - Part 1 : sampling of airborne particles.) |
| NF A88-202-2-2000 |
焊接和有关工艺中的健康和安全.工作人员工作区空气粒子和气体的取样.第2部分:气体取样 |
(Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator’s breathing zone - Part 2 : sampling of gases.) |
| NF A88-221-1982 |
电弧焊工的保护.头部保护.词汇 |
(PROTECTION OF THE METAL ARC WELDER. PROTECTION OF THE HEAD. VOCABULARY.) |
| NF A88-230-1997 |
焊接和联接工艺过程中的健康和安全.弧焊工艺用透明焊接隔层,板条和屏蔽 |
(Health and safety in welding and allied processes. Transparent welding curtains, strips and screens for arc welding processes.) |
| NF A88-230/A1-2002 |
焊接及相关工艺的卫生和安全.弧焊用透明焊接防护罩、安全带和屏蔽物 |
(Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes.) |
| NF A88-440-2001 |
铜焊.人员资格鉴定 |
(Brazing - Brazer approval.) |
| NF A88-800-2003 |
塑料焊接人员.焊工资格检验.热塑焊接组件 |
(Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies.) |
| NF A88-950-1-2002 |
水下焊接焊工资格检验。第１部分：高压湿焊的潜水焊工 |
(Qualification testing of welders for under-water welding - Part 1 : diver-welders for hyperbaric wet welding.) |
| NF A88-950-2-2002 |
水下焊接焊工资格检验。第2部分：高压干焊的潜水焊工和焊接操作者 |
(Qualification testing of welders for under-waster welding - Part 2 : diver-welders and welding operators for hyperbaric dry welding.) |
| NF A89-010-1-1992 |
金属材料焊接工艺与验收规范.第1部分:熔焊一般规则(欧洲标准EN 288-1) |
(Specification and approval of welding procedures for metallic materials. Part 1 : general rules for fusion welding.) |
| NF A89-010-1/A1-1997 |
NF EN 288-1-1992的修改件1 |
() |
| NF A89-010-10-1996 |
金属材料焊接工艺的验收和规范.第10部分:电子束焊接工艺规范 |
(SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 10 : WELDING PROCEDURE SPECIFICATION FOR ELECTRON BEAM WELDING. (EUROPEAN STANDARD EN ISO 9956-10).) |
| NF A89-010-11-1996 |
金属材料焊接工艺的验收和规范.第11部分:激光束焊接工艺规范 |
(SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 11 : WELDING PROCEDURE SPECIFICATION FOR LASER BEAM WELDING. (EUROPEAN STANDARD EN ISO 9956-11).) |
| NF A89-010-11-1997 |
NF A89-010-1-92补充件1 |
() |
| NF A89-010-2-1992 |
金属材料焊接工艺与验收规范.第2部分:电弧焊焊接程序规范(欧洲标准EN 288-2) |
(Specification and approval of welding procedures for metallic materials. Part 2 : welding procedure specification for arc welding.) |
| NF A89-010-2/A1-1997 |
NF EN 288-2-1992的修改件1 |
() |
| NF A89-010-21-1997 |
NF A89-010-2-92补充件1 |
() |
| NF A89-010-3-1992 |
金属材料焊接工艺的验收和规范.第3部分:钢件电弧焊焊接工艺试验(欧洲标准EN 288-3) |
(Specification and approval of welding procedures for metallic materials. Part 3 : welding procedure tests for the arc welding of steels.) |
| NF A89-010-3/A1-1997 |
NF EN 288-3-1992的修改件1 |
() |
| NF A89-010-31-1997 |
NF A 89-010-3-92的补充件1(欧洲标准EN 288-3的修改件1) |
() |
| NF A89-010-4/A1-1997 |
NF EN 288-4-1993的修改件1 |
() |
| NF A89-010-41-1997 |
NF A89-010-4-93补充件1 |
() |
| NF A89-010-5-1994 |
金属材料焊接程序的规范和认可.第5部分:使用批准的电弧焊焊条进行认可 |
(Specification and approval of welding procedures for metallic materials. Part 5 : approval by using approved welding consumables for arc welding.) |
| NF A89-010-6-1994 |
金属材料焊接程序的规范和认可.第6部分:有关以前试验的认可 |
(SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 6 : APPROVAL RELATED TO PREVIOUS EXPERIENCE. (EUROPEAN STANDARD EN 288-6).) |
| NF A89-010-7-1995 |
金属材料焊接程序的规范和认可.第七部分:使用电弧焊标准接程序进行认可 |
(SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 7 : APPROVAL BY A STANDARD WELDING PROCEDURE FOR ARC WELDING. (EUROPEAN STANDARD EN 288-7).) |
| NF A89-010-8-1995 |
金属材料焊接程序的规范和认可.第八部分:利用预生产焊接试验进行认可 |
(SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATEIRALS. PART 8 : APPROVAL BY A PRE-PRODUCTION WELDING TEST. (EUROPEAN STANDARD EN 288-8).) |
| NF A89-011-1986 |
煤气或蒸气用钢压力器.焊接操作方式的鉴定.固定在横木顶杆或拉杆.竖杆壁上的连接情况 |
(STEEL VESSELS SUBJECT TO GAS OR STEAM PRESSURE. QUALIFICATION OF A WELDING PROCEDURE. APPLICATION TO THE WELDING OF TIE BARS,BRACES AND BOLTS ON TO A WALL.) |
| NF A89-052-2-2001 |
金属材料焊接程序的规范和合格评定.焊接程序规范.第2部分:气焊 |
(Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2 : gas welding.) |
| NF A89-057-11-2002 |
金属材料焊接程序规范和鉴定.焊接程序试验.第11部分:电子和激光射线焊接 |
(Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11 : electron and laser beam welding.) |
| NF A89-057-8-2002 |
金属材料焊接程序规范和鉴定.焊接程序试验.第8部分:管对管-板接头的焊接 |
(Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8 : welding of tubes to tube-plate joints.) |
| NF A89-101-1-1998 |
焊接.金属材料焊接推荐.第1部分:电弧焊接的一般指南 |
(WELDING. RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS. PART 1 : GENERAL GUIDANCE FOR ARC WELDING. (EUROPEAN STANDARD EN 1011-1).) |
| NF A89-101-1/A1-2002 |
焊接.金属材料焊接的推荐规范.第1部分:电弧焊接通用指南 |
(Welding - Recommendations for welding of metallic materials - Part 1 : general guidance for arc welding.) |
| NF A89-101-2-2002 |
焊接.金属材料焊接的推荐规范.第2部分:铁素体钢的电弧焊 |
(Welding - Recommendations for welding of metallic materials - Part 2 : arc welding of ferritic steel.) |
| NF A89-101-3-2000 |
焊接.金属材料焊接的推荐方法.第3部分:不锈钢的电弧焊 |
(Welding - Recommendations for welding of metallic materials - Part 3 : arc welding of stainless steels.) |
| NF A89-101-4-2000 |
焊接.金属材料焊接的推荐方法.第4部分:铝和铝合金的电弧焊 |
(Welding - Recommendations for welding of metallic materials - Part 4 : arc welding of aluminium and aluminium alloys.) |
| NF A89-101-5-2003 |
焊接.金属材料焊接的推荐方法.第5部分:包层钢焊接 |
(Welding - Recommendations for welding of metallic materials - Part 5 : welding of clad steel.) |
| NF A89-204-2-1996 |
金属材料焊接的破坏试验.硬度试验.第2部分:焊接接缝的微硬度试验(欧洲标准EN 1043-2) |
(DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. HARDNESS TEST. PART 2 : MICRO HARDNESS TESTING ON WELDED JOINTS. (EUROPEAN STANDARD EN 1043-2).) |
| NF A89-206-1987 |
电阻焊.点焊与凸焊.焊接点用扭转剪切试件 |
(Welding and allied techniques. Resistance spot, projection and seam welded lap joints. Tension shear tests.) |
| NF A89-207-2000 |
焊接.在奥氏体和双重铁素体奥氏体铬镍不锈钢焊接金属中铁素体数目的测定 |
(Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals.) |
| NF A89-208-1987 |
焊接和有关技术.点焊,凸焊或缝焊搭接接头 |
(WELDING AND ALLIED TECHNIQUES. SPOT,PROJECTION OR SEAM WELDED LAP JOINTS.) |
| NF A89-210-1996 |
金属材料焊接的破坏试验.断裂试验.(欧洲标准EN 1320) |
(DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. FRACTURE TEST. (EUROPEAN STANDARD EN 1320).) |
| NF A89-211-1996 |
金属材料焊接的破坏试验.焊接的低倍及显微检验(欧洲标准EN 1321) |
(DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. MACROSCOPIC AND MICROSCOPIC EXAMINATION OF WELDS. (EUROPEAN STANDARD EN 1321).) |
| NF A89-220-1973 |
铝和铝合金.焊接.分类和焊接点的检验 |
(ALUMINIUM AND ALLOY THEREOF. WELDING. CLASSIFICATION AND TESTING OF WELDED JOINTS.) |
| NF A89-231-1992 |
钢的弧焊接头.质量缺陷等级导则 |
(ARC-WELDED JOINTS IN STEEL. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. (EUROPEAN STANDARD EN 25817).) |
| NF A89-232-1994 |
铝和可焊合金的弧焊接头.质量缺陷等级导则 |
(ARC-WELDED JOINTS IN ALUMINIUM AND ITS WELDABLE ALLOYS. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. (EUROPEAN STANDARD EN 30042).) |
| NF A89-233-1996 |
焊接.电子束和激光束焊接接头.缺陷的质量级别导则.第1部分:钢 |
(WELDING. ELECTRONS AND LASER BEAM WELDED JOINTS. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. PART 1 : STEEL. (EUROPEAN STANDARD EN ISO 13919-1).) |
| NF A89-234-2001 |
焊接.电子和激光束焊接接头.缺陷的质量级别导则.第1部分:铝及其可焊合金 |
(Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2 : aluminium and its weldable alloys.) |
| NF A89-240-1987 |
焊接和有关技术.电阻点焊、凸焊或缝焊搭接接头.带解释的缺陷分类 |
(WELDING AND ALLIED PROCESSES. RESISTANCE SPOT,PROJECTION AND SEAM WELDED LAP JOINTS. CLASSIFICATION OF DEFECTS WITH EXPLANATORY COMMENTS.) |
| NF A89-250-1-1994 |
焊接的质量要求.金属材料的熔焊.第1部分:选择和使用导则 |
(Quality requirements for welding. Fusion welding of metallic materials. Part 1 : guidelines for selection and use.) |
| NF A89-250-2-1994 |
焊接的质量要求.金属材料的熔焊.第2部分:全面质量系统 |
(Quality requirements for welding. Fusion welding of metallic materials. Part 2 : comprehensive quality requirements.) |
| NF A89-250-3-1994 |
焊接的质量要求.金属材料的熔焊.第3部分:标准质量要求 |
(Quality requirements for welding. Fusion welding of metallic materials. Part 3 : standard quality requirements.) |
| NF A89-250-4-1994 |
焊接的质量要求.金属材料的熔焊.第4部分:基本质量要求 |
(Quality requirements for welding. Fusion welding of metallic materials. Part 4 : elementary quality requirements.) |
| NF A89-253-1996 |
焊接.预热温度、层间温度和预加热的维持温度测量导则 |
(Welding. Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature.) |
| NF A89-300-1996 |
焊接.焊接结构的通用公差.长度和角度尺寸.形状和位置 |
(WELDING. GENERAL TOLERANCES FOR WELDED CONSTRUCTIONS. DIMENSIONS FOR LENGTHS AND ANGLES. SHAPE AND POSITION. (EUROPEAN STANDARD EN ISO 13920).) |
| NF A89-310-1973 |
铝和铝合金.焊接.基本件的连接.选择原则 |
(ALUMINIUM AND ALUMINIUM ALLOYS. WELDING. ELEMENTARY TYPES OF ASSEHBLY. SELECTION CRITERIA.) |
| NF A89-350-2003 |
电阻焊.用恒定焊机设定值评价点焊电极寿命的规程 |
(Resistance welding - Procedure for the evaluation of the life of spot welding electrodes using constant machine settings.) |
| NF A89-410-1977 |
可钎焊性.带可变间隙试样的定义和方法 |
(SOLDERABILITY AND BRAZEABILITY. DEFINITION AND USE OF A SPECIMEN WITH VARIABLE GAP.) |
| NF A89-420-2000 |
钎焊.钎焊接点的无损试验 |
(Brazing - Destructive tests of brazed joints.) |
| NF A89-421-1979 |
钎焊用填充金属.钢、铸铁和其它金属连接的常用抗拉强度的测定 |
(Braze welding filler metals. Determination of the conventional tensile strengh of the bond to steel, cast iron and other metals.) |
| NF A89-430-2000 |
钎焊.钎焊接头的无损检验 |
(Brazing - Non-destructive examination of brazed joints.) |
| NF A89-440-2001 |
铜焊.程序认可 |
(Brazing - Procedure approval.) |
| NF A89-500-1997 |
焊缝的无损检验.金属材料用一般规则 |
(Non-destructive examination of welds. General rules for metallic materials.) |
| NF A89-500/A1-2003 |
焊接无损检验.金属材料的一般规则 |
(Non-destructive examination of welds - General rules for metallic materials.) |
| NF A89-510-1997 |
焊缝的无损检验.焊接接头的X射线照相检验 |
(Non-destructive examination of welds. Radiographic examination of welded joints.) |
| NF A89-510/A1-2003 |
焊接无损检验.焊接接头射线照相检验 |
(Non-destructive examination of welds - Radiographic examination of welded joints.) |
| NF A89-511-1998 |
焊缝的无损检验.焊接接头的X射线照相检验.验收等级 |
(Non-destructive examination of welds. Radiographic examination of welded joints. Acceptance levels.) |
| NF A89-511/A1-2003 |
焊缝的无损检验.焊接接头的X射线照相检验.验收水平 |
(Non-destructive examination of welds - Radiographic examination of welded joints - Acceptance levels.) |
| NF A89-520-1997 |
焊缝的无损检验.焊接接头的超声波检验 |
(Non destructive examination of welds. Ultrasonic examination of welded joints.) |
| NF A89-520/A1-2002 |
焊缝的无损检验.焊接接头的超声波检验 |
(Non-destructive testing of welds - Ultrasonic testing of welded joints.) |
| NF A89-521-1997 |
焊缝的无损检验.焊接接头的超声波检验.验收等级 |
(Non destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels.) |
| NF A89-521/A1-2002 |
焊缝的无损检验.焊接接头的超声波检验.验收等级 |
(Non-destructive testing of welds - Ultrasonic testing of welded joints - Acceptance levels.) |
| NF A89-522-1998 |
焊缝的无损检验.超声波检验.焊缝中的迹象表征 |
(Non-destructive examination of welds. Ultrasonic examination. Characterization of indications in welds.) |
| NF A89-522/A1-2002 |
焊缝的无损检验.超声检验.焊缝征兆表征 |
(Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds.) |
| NF A89-540-1997 |
熔焊缝的无损检验.外观检查 |
(Non-destructive examination of fusion welds. Visual examination.) |
| NF A89-541-1998 |
焊缝的无损检验.焊缝的穿透测试.验收等级 |
(Non-destructive examination of welds - Penetrant testing of welds - Acceptance levels.) |
| NF A89-541/A1-2002 |
焊缝的无损检验.焊缝的穿透检验.验收等级 |
(Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels.) |
| NF A89-550-1998 |
焊缝的无损检验.焊缝的磁粉检验 |
(Non-destructive examination of welds - Magnetic particle examination of welds.) |
| NF A89-550/A1-2002 |
焊缝的无损检验.焊缝的磁粉检验 |
(Non-destructive testing of welds - Magnetic particle testing of welds.) |
| NF A89-551-1998 |
焊缝的无损检验.焊缝的磁粉检验.验收等级 |
(Non-destructive examination of welds - Magnetic particle testing of welds - Acceptance levels.) |
| NF A89-551/A1-2002 |
焊缝的无损检验.焊缝的磁粉检验.验收等级 |
(Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels.) |
| NF A89-565-1987 |
焊接和相关工艺.电阻点焊和缝焊接缝的放射线检查.推荐实施规范 |
(Welding and allied processes. Radiographic testing of resistance spot and seam welded joints. Recommended practice.) |
| NF A89-567-2001 |
电阻点焊、滚焊和浮凸焊接机械剥离试验的程序和样品尺寸 |
(Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds.) |
| NF A89-568-2001 |
电阻点焊、凸焊和滚焊的维氏硬度试验(低荷载和超微硬度) |
(Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness).) |
| NF A89-569-2001 |
电阻点焊和浮凸焊接十字形拉力试验的程序和样品尺寸 |
(Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds.) |
| NF A89-570-2002 |
电阻点焊、缝焊和凸焊的剪切试验用样品尺寸和程序 |
(Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds.) |
| NF A89-573-2003 |
金属材料焊缝的有损检验.电阻点焊的扭转试验 |
(Destructive tests on welds in metallic materials - Torsion test of resistance spot welds.) |
| NF A89-574-2003 |
金属材料焊接的无损检验.电阻焊接.电阻缝焊的压力试验 |
(Destructive test on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds.) |
| NF A89-575-2003 |
金属材料焊接的无损检验.测量δ铁素体用的取样方法 |
(Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement.) |
| NF A89-600-1998 |
焊接.金属材料的弧双端螺栓焊接(欧洲标准EN ISO 14555) |
(WELDING. ARC STUD WELDING OF METALLIC MATERIALS. (EUROPEAN STANDARD EN ISO 14555).) |
| NF A89-601-2001 |
焊接.金属材料的摩擦焊接 |
(Welding - Friction welding of metallic materials.) |
| NF A89-611-1992 |
钢焊缝.焊缝超声波检验用第2号校准块 |
(Welds in steel. Calibration block number 2 for ultrasonic examination of welds.) |
| NF A89-700-1-2000 |
焊接.电子束焊接机的认可检验.第1部分:原则和认可条件 |
(Welding - Acceptance inspection of electron beam welding machines - Part 1 : principles and acceptance conditions.) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com