标准号 |
中文名称 |
英文名称 |
NF P18-437-1999 |
新鲜混凝土测试.第1部分:取样 |
(Testing fresh concrete - Part 1 : sampling.) |
NF P18-438-2001 |
硬化混凝土试验.第2部分:强度试验用样品的制备和养护 |
(Testing hardened concrete - Part 2 : making and curing specimens for strength tests.) |
NF P18-441-2000 |
硬化混凝土试验.第4部分:抗压强度.试验机规范 |
(Testing hardened concrete - Part 4 : compressive strength - Specification for testing machines.) |
NF P18-443-2001 |
试验新鲜混凝土.第7部分:空气含量.压力方法 |
(Testing fresh concrete - Part 7 : air content - Pressure methods.) |
NF P18-444-2000 |
结构中的试验混凝土.第1部分:芯样本.压缩时的取样,检验和试验 |
(Testing concrete in structures - Part 1 : cored specimens - Taking, examining and testing in compression.) |
NF P18-445-2003 |
结构中的混凝土试验.第2部分:无损检验.回弹数的测定 |
(Testing concrete in structures - Part 2 : non-destructive testing - Determination of rebound number.) |
NF P18-451-1981 |
混凝土.塌陷试验 |
(Concrete. Slump test.) |
NF P18-452-1988 |
混凝土.和易性测量计测定混凝土流动时间 |
(CONCRETES. MEASURING THE FLOW TIME OF CONCRETES AND MORTARS USING A WORKABILITYMETER.) |
NF P18-455-2003 |
硬化混凝土试验.第3部分:试样的压缩强度 |
(Testing hardened concrete - Part 3 : compressive strength of test specimens.) |
NF P18-500-1995 |
混凝土.沙型混凝土 |
(Concrete. Sand concrete.) |
NF P18-501-1992 |
水硬性混凝土添加剂.填缝料 |
(ADDITIONS FOR CONCRETE. FILLERS.) |
NF P18-502-1992 |
混凝土添加剂.硅雾 |
(ADDITIONS FOR CONCRETE. SILICA FUMES.) |
NF P18-506-1992 |
水硬性混凝土添加剂.细磨碎的玻璃状渣.炉 |
(ADDITIONS FOR CONCRETE. GROUND GLASSY BLASTFURNACE SIAG.) |
NF P18-507-1992 |
混凝土掺和料.水分保持.用“CONEDE DE MARSH“喷涌测量流动性的方法 |
(ADDITIONS FOR CONCRETE. WATER RETENTION. METHOD FOR MEASUREMENT OF FLUIDITY BY FLOWING WITH THE “CONE DE MARSH“.) |
NF P18-508-1995 |
水硬性混凝土添加剂.石灰石填加剂.规范 |
(ADDITIONS FOR CONCRETE. LIMESTONE ADDITIONS. SPECIFICATIONS AND CONFORMITY CRITERIA.) |
NF P18-509-1998 |
混凝土粘接剂.硅质添加剂.规范和一致性标准 |
(ADDITIONS FOR CONCRETE. SILICEOUS ADDITIONS. SPECIFICATIONS AND CONFORMITY CRITERIA.) |
NF P18-601-2003 |
混凝土用集料 |
(Aggregates for concrete.) |
NF P18-602-2003 |
沥青混合物以及道路、飞机场和其他交通区域表面处理用集料 |
(Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas.) |
NF P18-603-1-2002 |
轻集料.第1部分:混凝土、砂浆和灰浆用轻集料 |
(Lightweight aggregates - Part 1 : lightweight aggregates for concrete, mortar, and grout.) |
NF P18-621-1-1996 |
集料总特征的试验.第1部分:抽样方法 |
(TESTS FOR GENERAL PROPERTIES OF AGGREGATES. PART 1 : METHODS FOR SAMPLING. (EUROPEAN STANDARD EN 932-1).) |
NF P18-621-2-1999 |
集料一般特性的试验.第2部分:实验室样品还原法 |
(Tests for general properties of aggregates. Part 2 : methods for reducing laboratory samples.) |
NF P18-621-3-1996 |
集料总特征的试验.第3部分:简化的岩相描述过程和术语 |
(TESTS FOR GENERAL PROPERTIES OF AGGREGATES. PART 3 : PROCEDURE AND TERMINOLOGY FOR SIMPLIFIED PETROGRAPHIC DESCRIPTION. (EUROPEAN STANDARD EN 932-3).) |
NF P18-621-5-2000 |
集料的一般特性试验.第5部分:通用设备和校准 |
(Tests for general properties of aggregates - Part 5 : common equipment and calibration.) |
NF P18-621-6-1999 |
集料一般特性的试验.第6部分:复验性和再生性定义 |
(Tests for general properties of aggregates. Part 6 : definitions of repeatability and reproducibility.) |
NF P18-622-1-1997 |
集料几何特性的试验.第1部分:粒径分布 |
(TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 1 : DETERMINATION OF PARTICLE SIZE DISTRIBUTION. SIEVING METHOD. (EUROPEAN STANDARD EN 933-1).) |
NF P18-622-10-2002 |
集料的几何性能试验.第10部分:细粒评定.填料的分级(喷气筛) |
(Tests for geometrical properties of aggregates - Part 10 : assessment of fines - Grading of fillers (air jet sieving).) |
NF P18-622-2-1996 |
岩石粒度几何性能的检验方法.第2部分:粒度分布测定.筛分振动分析.筛孔公称尺寸 |
(Tests for geometrical properties of aggregates. Part 2 : determination of particle size distribution. Test sieves, nominal size of apertures.) |
NF P18-622-3-1997 |
集料几何特性的试验.第3部分:颗粒形状的测定.侧面指数 |
(TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 3 : DETERMINATION OF PARCICLE SHAPE. FLAKINESS INDEX. (EUROPEAN STANDARD EN 933-3).) |
NF P18-622-4-2000 |
集料的几何特性试验.第4部分:粒子形状测定.形状系数 |
(Tests for geometrical properties of aggregates - Part 4 : determination of particle shape - Shape index.) |
NF P18-622-5-1998 |
集料几何特性的试验.第5部分:粗集料颗粒表面碎裂百分比的测定 |
(TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 5 : DETERMINATION OF PERCENTAGE OF CRUSHED AND BROKEN SURFACES IN COARSE AGGREGATE PARTICLES. (EUROPEAN STANDARD EN 933-5).) |
NF P18-622-6-2002 |
集料几何特性的试验.第6部分:颗粒形状的测定.片层分裂指数 |
(Test for geometrical properties of aggregates - Part 6 : assessment of surface characteristics - Flow coefficient of aggegates.) |
NF P18-622-7-1998 |
集合体的几何特性的试验.第7部分:壳含量和测定.粗集合体中壳的百分比 |
(TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 7 : DETERMINATION OF SHELL CONTENT. PERCENTAGE OF SHELLS IN COARSE AGGREGATES. (EUROPEAN STANDARD EN 933-7).) |
NF P18-622-8-1999 |
集料地理特性试验.第8部分:完整性评估,沙等效试验.(EN 933-8) |
(TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 8 : ASSESSMENT OF FINES. SAND EQUIVALENT TEST. (EUROPEAN STANDARD EN 933-8).) |
NF P18-622-9-1999 |
集料几何特性的试验.第9部分:细集料的评估.次甲基蓝试验 |
(Tests for geometrical properties of aggregates. Part 9 : assessment of fines. Methylene blue test.) |
NF P18-650-1-1996 |
集料的机械和物理性能试验.第1部分:耐磨性测定 |
(TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES. PART 1 : DETERMINATION OF THE RESISTANCE TO WEAR (MICRO-DEVAL). (EUROPEAN STANDARD EN 1097-1).) |
NF P18-650-2-1998 |
集料的机械和物理性能试验.第2部分:抗破裂性能的测定方法 |
(TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES. PART 2 : METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION. (EUROPEAN STANDARD EN 1097-2).) |
NF P18-650-3-1998 |
集合体机械和物理特性试验.第3部分:松散块密度和砂眼的测定 |
(TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES. PART 3 : DETERMINATION OF LOOSE BULK DENSITY AND VOIDS. (EUROPEAN STANDARD EN 1097-3).) |
NF P18-650-4-2000 |
集料的机械和物理性能试验.第4部分:测定压缩烘干后填充料空隙 |
(Tests for mechanical and physical properties of aggregates - Part 4 : determination of the voids of dry compacted filler.) |
NF P18-650-6-2001 |
原岩颗粒的机械和物理性能的试验.第6部分:颗粒密度和吸水率的测定 |
(Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption.) |
NF P18-650-7-1999 |
集料的物理和机械特性试验.第7部分:填充物的颗粒密度的测定.比重瓶方法 |
(Tests for mechanical and physical properties of aggregates - Part 7 : determination of the particle density of filler - Pyknometer method.) |
NF P18-650-8-2000 |
集料的机械和物理性能试验.第8部分:测定抛光石尺寸 |
(Tests for mechanical and physical properties of aggregates - Part 8 : determination of the polished stone value.) |
NF P18-650-9-1998 |
集料的机械和物理性能试验.第9部分:通过防滑钉胎磨擦测定耐磨性.NORDIC试验 |
(Tests for mechanical and physical properties of aggregates. Part 9 : determination of the resistance to wear by abrasion from studded tyres. Nordic test.) |
NF P18-653-1-2000 |
集料的热性能和气候老化性能试验.第1部分:耐冻性和耐解冻性测定 |
(Test for thermal and weathering properties of aggregates - Part 1 : determination of resistance to freezing and thawing.) |
NF P18-653-2-1998 |
集料的热性能和老化性能试验.第2部分:硫酸镁试验 |
(Tests for thermal and weathering properties of aggregates. Part 2 : magnesium sulfate test.) |
NF P18-653-3-2002 |
集料的风化特性和热特性试验.第3部分:玄武岩的煮沸试验 |
(Tests for thermal and weathering properties of aggregates - Part 3 : boiling test for “Sonnenbrand basalt“.) |
NF P18-653-4-1998 |
集料的热性能和老化性能试验.第4部分:干缩率测定 |
(TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES. PART 4 : DETERMINATION OF DRYING SHRINKAGE. (EUROPEAN STANDARD EN 1367-4).) |
NF P18-653-5-2003 |
集料的热性能和老化性能试验.第4部分:耐热冲击性测定 |
(Tests for thermal and weathering properties of aggregates - Part 5 : determination of resistance to thermal shock.) |
NF P18-660-1-1998 |
集料的化学特性的试验.第1部分:化学分析 |
(Tests for chemical properties of aggregates. Part 1 : chemical analysis.) |
NF P18-660-3-2002 |
集料化学性能的试验.第3部分:用集料滤取法制备提取物 |
(Tests for chemical properties of aggregates - Part 3 : preparation of eluates by leaching of aggregates.) |
NF P18-661-1-2003 |
钢筋石.第1部分:规范 |
(Armourstone - Part 1 : specification.) |
NF P18-661-2-2003 |
钢筋石.第2部分:试验方法 |
(Armourstone - Part 2 : test methods.) |
NF P18-670-2003 |
铁道路基用集料 |
(Aggregates for railway ballast.) |
NF P18-806-1989 |
水硬性混凝土建筑用的特殊产品.粘结料产品或合成树脂基产品.灰末粒度尺寸的分析 |
(SPECIAL PRODUCTS FOR HYDRAULIC CONCRETE CONSTRUCTIONS. BINDER- OR SINTHETIC RESIN BASED PRODUCTS. PARTICLE SIZE ANALYSIS OF POWDERS.) |
NF P18-807-1989 |
水硬性混凝土建筑用的特殊产品.合成树脂或水凝基制品.+450℃时烧失和+950℃灰份含量 |
(SPECIAL PRODUCTS FOR HYDRAULIC CONCRETE CONSTRUCTIONS. SYNTHETIC RESIN OR HYDRAULIC BINDER BASED PRODUCTS. FIRE LOSS AT + 450 DEGREES CELSIUS AND ASH CONTENT AT + 950 DEGREES CELSIUS.) |
NF P18-810-1989 |
水硬性混凝土建筑用的特殊产品.合成树脂基产品.使用期限的确定 |
(SPECIAL PRODUCTS FOR HYDRAULIC CONCRETE CONSTRUCTIONS. SYNTHETIC RESIN BASED PRODUCTS. DETERMINATION OF USUAL PRACTICE TIME.) |
NF P18-874-1989 |
水硬性混凝土建筑用的特殊产品.粘结两块混凝土的产品.最大粘合时间的试验 |
(SPECIAL PRODUCTS FOR HYDRAULIC CONCRETE CONSTRUCTIONS. PRODUCTS FOR MAKING STRUCTURAL JOINTS BETWEEN TWO CONCRETE ELEMENTS. TEST FOR DETERMINING THE MAXIMUM ASSEMBLY TIME.) |
NF P18-901-1-1998 |
混凝土结构的修复和保护用产品和系统.定义、要求、质量控制和合格评定.第1部分:定义 |
(Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Part 1 : definitions.) |
NF P18-921-1-2002 |
混凝土结构的防护和维修用产品和系统.粒度分析.第1部分:预混合泥浆干组分的试验方法 |
(Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1 : Test method for dry components of premixed mortar.) |
NF P18-921-2-1999 |
混凝土结构的保护和修复产品和系统.粒度分析.第2部分:聚合物粘结剂填充试验方法 |
(Products and systems for the protection and repair of concrete structures. Granulometry analysis. Part 2 : test method for fillers for polymer bonding agents.) |
NF P18-923-1999 |
混凝土结构的修复和保护用产品和系统.试验方法.脱落法测量粘结强度 |
(Products and systems for the repair and protection of concrete structures. Test methods. Measurement of bond strength by pull-off.) |
NF P18-924-1998 |
混凝土结构的修复和保护用产品和系统.试验方法.聚合物拉伸强度的测定 |
(Products and systems for the protection and repair of concrete structures. Test methods. Determination of tensile strength development for polymers.) |
NF P18-926-1999 |
混凝土结构的防护和修理用产品和系统,试验方法.红外分析(EN 1767) |
(PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES. TEST METHODS. INFRARED ANALYSIS. (EUROPEAN STANDARD EN 1767).) |
NF P18-927-1-2000 |
混凝土结构的保护和修复用产品和系统.试验方法.与环氧树脂有关的重活化功能.第1部分:环氧树脂等同物的测定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 1 : determination of epoxy equivalent.) |
NF P18-927-2-2000 |
混凝土结构的保护和修复用产品和系统.试验方法.与环氧树脂有关的重活化功能.第2部分:用总基数对胺功能的测 |
(Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2 : determination of amine functions using the total basici) |
NF P18-934-1999 |
混凝土结构的防护和修理用产品和系统,试验方法. 开放时间测定(EN 12189) |
(PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES. TEST METHODS. DETERMINATION OF OPEN TIME. (EUROPEAN STANDARD EN 12189).) |
NF P18-937-1998 |
混凝土结构制造和修复的产品和系统.修理砖石结构的压力强度的测定(欧洲标准EN 12190) |
(Products and systems for the protection and repair of concrete structures. Test methods. Determination of compressive strength of repair mortar.) |
NF P18-938-2002 |
混凝土结构的防护和维修用产品和系统.试验方法.压缩弹性模量的测定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression.) |
NF P18-939-1998 |
混凝土结构的修复和保护产品和系统.试验方法.热膨胀系数的测定 |
(Products and systems for the protection and repair of concrete structures. Test methods. Determination of the coefficient of thermal expansion.) |
NF P18-942-2002 |
混凝土结构的防护和维修用产品和系统.试验方法.凝固时间的测定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time.) |
NF P18-945-2002 |
混凝土结构的防护和维修用产品和系统.试验方法.抗毛细管吸收性的测定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption.) |
NF P18-949-1-2002 |
混凝土结构修复和保护的产品和系统.试验方法.测定热容性.第1部分:解冻.浸入防冻盐融雪 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 1 : freeze-thaw cycling with de-icing salt immersion.) |
NF P18-949-2-2002 |
混凝土结构修复和保护的产品和系统.试验方法.测定热容性.第2部分:振动循环(热振动) |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 2 : thunder-shower cycling (thermal shock).) |
NF P18-949-3-2002 |
混凝土结构修复和保护的产品和系统.试验方法.测定热容性.第3部分:无溶解盐冲击的热循环 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3 : thermal cycling without de-icing salt impact.) |
NF P18-949-4-2002 |
混凝土结构修复和保护的产品和系统.试验方法.测定热容性.第4部分:干热循环 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 4 : dry thermal cycling.) |
NF P18-949-5-2002 |
混凝土结构修复和保护的产品和系统.试验方法.测定热容性.第5部分:温度冲击耐力 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 5 : resistance to temperature shock.) |
NF P18-950-2004 |
混凝土结构的保护和修理用产品和系统.试验方法.耐强化学侵蚀的测定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to severe chemical attack.) |
NF P18-953-1-2002 |
混凝土结构修复和保护的产品和系统.试验方法.测定可行性.第1部分:触变泥浆的流动性试验 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1 : test for flow of thixotropic mortars.) |
NF P18-953-2-2002 |
混凝土结构修复和保护的产品和系统.试验方法.测定可行性.第2部分:泥浆或灰浆的流动性试验 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2 : test for flow of grout or mortar.) |
NF P18-953-3-2002 |
混凝土结构修复和保护的产品和系统.试验方法.测定可行性.第3部分:泥浆或灰浆的流动性试验 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 3 : test for flow of repair concrete.) |
NF P18-953-4-2002 |
混凝土结构的防护和维修用产品和系统.试验方法.可加工性的测定.第4部分:备用泥浆高空的应用 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4 : application of repair mortar overhead.) |
NF P18-954-1999 |
混凝土结构的修复和保护产品及系统.试验方法.结构粘结剂特征表示用钢与钢之间粘性的测定 |
(PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES. TEST METHODS. DETERMINATION OF ADHESION STEEL-TO-STEEL FOR CHARACTERISATION OF STRUCTURAL BONDING AGENTS. (EUROPEAN STANDARD EN 12188).) |
NF P18-955-1999 |
混凝土结构的修复和保护产品及系统.试验方法.混凝土间粘性的测定 |
(Products and systems for the protection and repair of concrete structures. Test methods. Determination of adhesion concrete to concrete.) |
NF P18-956-1999 |
混凝土结构的修复和保护产品及系统.试验方法.倾斜剪切强度的测定 |
(Products and systems for the protection and repair of concrete structures. Test methods. Determination of slant shear strength.) |
NF P18-957-2002 |
混凝土结构修复和保护的产品和系统.试验方法.测定结构粘合剂的耐久性 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of the durability of structural bonding agents.) |
NF P18-959-2-2003 |
混凝土构件的防护和维修的产品和系统.试验方法.动态荷载下疲劳的测定.第2部分:淬火后疲劳的测定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 2 : after hardening.) |
NF P18-966-1999 |
混凝土结构的修复和保护产品和系统.试验方法.混凝土表面设施用结构粘结剂适用性的测量方法 |
(Products and systems for the protection and repair of concrete structures. Test methods. Tests to measure the suitability of structural bonding agents for application to concrete surface.) |
NF P18-975-2002 |
混凝土结构的防护和维修用产品和系统.试验方法.疏水性浸渍的干燥试验 |
(Products and systems for the protection and repair of concrete structures - Test methods - Drying test for hydrophobic impregnation.) |
NF P18-976-2002 |
混凝土结构的防护和维修用产品和系统.试验方法.疏水性浸渍的吸水率和耐碱性试验 |
(Products and systems for the protection and repair of concrete structures - Test methods - Water absorption and resistance to alkali for hydrophobic impregnations.) |
NF P18-977-1-2003 |
混凝土结构的防护和维修用产品和系统.试验方法.第1部分:聚合物及表面防护系统(SPS)线性收缩的测定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Part 1 : determination of linear shrinkage for polymers and surface protection systems (SPS).) |
NF P18-977-3-2003 |
混凝土结构的防护和维修用产品和系统.试验方法.第3部分:结构粘合剂的老化线性收缩率测定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Part 3 : determination of early age linear shrinkage for structural bonding agents.) |
NF P18-977-4-2002 |
混凝土结构的防护和维修用产品和系统.试验方法.第4部分:收缩率和膨胀率的测定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Part 4 : determination of shrinkage and expansion.) |
NF P18-978-2003 |
混凝土结构的保护和维修用产品和系统.试验方法.增强保护用产品的触变性测定 |
(Products and systems for the protection and repair of concrete structures - Test method - Determination of thixotropy of products for protection of reinforcement.) |
NF P18-979-2002 |
混凝土结构的防护和维修用产品和系统.试验方法.盐力解冻后疏水性浸渍混凝土质量损失的测定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress.) |
NF P19-102-2003 |
装配式结构的轻骨料混凝土预制增强构件 |
(Prefabricated reinforced components of lightweight aggregate concrete with open structure.) |
NF P19-103-1994 |
热压充气混凝土干密度的测定 |
(DETERMINATION OF THE DRY DENSITY OF AUTOCLAVED AERATED CONCRETE. (EUROPEAN STANDARD EN 678).) |
NF P19-104-1994 |
热压充气混凝土压强的测定 |
(DETERMINATION OF THE COMPRESSIVE STRENGTH OF AUTOCLAVED AERATED CONCRETE. (EUROPEAN STANDARD EN 679).) |
NF P19-105-1997 |
热压充气混凝土弯曲强度的测定 |
(Determination of flexural strength of autoclaved aerated concrete.) |
NF P19-106-1997 |
多孔结构热压充气混凝土或轻骨料混凝土加压条件下弹性的静模数测定 |
(Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure.) |
NF P19-107-1994 |
热压充气混凝土干燥收缩率的测定 |
(DETERMINATION OF THE DRYING SHRINKAGE OF AUTOCLAVED AERATED CONCRETE. (EUROPEAN STANDARD EN 680).) |
NF P19-108-1998 |
开式结构高压蒸氧加气混凝土或轻集料混凝土预制件用钢筋网或组架焊接接缝剪切强度的测定 |
(Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure.) |
NF P19-109-1995 |
钢筋和热压充气混凝土胶合性能的“推拉“试验法测定 |
(DETERMINATION OF THE BOND BEHAVIOUR BETWEEN REINFORCING BARS AND AUTOCLAVED AERATED CONCRETE BY THE “PUSH-OUT“ TEST. (EUROPEAN STANDARD EN 989).) |
NF P19-110-1998 |
高压蒸氧加气混凝土制无负荷件中钢应力的测定 |
(DETERMINATION OF STEEL STRESSES IN UNLOADED REINFORCED COMPONENTS MADE OF AUTOCLAVED AERATED CONCRETE. (EUROPEAN STANDARD EN 1738).) |
NF P19-112-2003 |
高压蒸氧加气混凝土和多孔结构轻质集料混凝土中钢筋防蚀检验的试验方法 |
(Test methods for verification of corrosion protection of reinforcement in autoclaved aereted concrete and lightweight aggregate concrete with open structure.) |
NF P19-113-1997 |
热压充气混凝土中水分含量的测定(欧洲标准EN 1353) |
(Determination of moisture content of autoclaved aerated concrete.) |
NF P19-115-1995 |
用热压充气混凝土或多孔结构轻质集料混凝土制成的预制钢筋构件的尺寸测定 |
(DETERMINATION OF THE DIMENSIONS OF PREFABRICATED REINFORCED COMPONENTS MADE OF AUTOCLAVED AERATED CONCRETE OR LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE. (EUROPEAN STANDARD EN 991).) |
NF P19-116-1998 |
开式结构高压蒸氧加气混凝土或轻集料混凝土预制件间接缝的共面力用剪切强度的测定 |
(Determination of shear strength for in-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure.) |
NF P19-117-1995 |
多孔结构轻质集料混凝土干密度的测定 |
(DETERMINATION OF THE DRY DENSITY OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE. (EUROPEAN STANDARD EN 992).) |
NF P19-118-1997 |
多孔结构轻骨料混凝土压缩强度的测定(欧洲标准EN 1354) |
(Determination of compressive strength of lightweight aggregate concrete with open structure.) |
NF P19-120-1997 |
多孔结构热压充气或轻骨料混凝土加压条件下蠕动形变的测定(欧洲标准EN 1355) |
(Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure.) |
NF P19-121-1997 |
横向荷载下多孔结构热压充气或轻骨料混凝土制预制增强部件的性能试验(欧洲标准EN 1356) |
(Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under transverse load.) |
NF P19-122-1996 |
多孔结构轻质集料混凝土挠曲强度的测定(欧洲标准EN 1521) |
(Determination of flexural strength of lightweight aggregate concrete with open structure.) |
NF P19-123-1998 |
主要在纵向负载下的开式结构高压蒸氧加气混凝土或轻集料混凝土预制增强件的性能试验(立式件) |
(Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components).) |
NF P19-124-1998 |
开式结构高压蒸氧加气混凝土或轻集料混凝土预制件间接缝的面外力用剪切强度的测定 |
(Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lighweight aggregate concrete with open structure.) |
NF P19-125-1998 |
开式结构高压蒸氧加气混凝土或轻集料混凝土制多层件不同层间剪切强度的测定 |
(Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure.) |
NF P19-126-2000 |
用束试验法对增强钢和粘结行为的测定.第1部分:短款试验 |
(Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the “beam test“ - Part 1 : short term test.) |
NF P19-800-2001 |
预制混凝土产品的共同规则 |
(Common rules for precast concrete products.) |
NF P19-806-2001 |
预制混凝土产品.栏栅用构件 |
(Precast concrete products - Elements for fences.) |
NF P19-826-2003 |
预浇铸混凝土制品.道路附属设施和公园用品 |
(Precast concrete products - Street furniture and garden products.) |
NF P19-828-1999 |
预制混凝土制品.玻璃纤维增强水泥的工厂生产控制的一般规则 |
(Precast concrete products - General rules for factory production control of glass-fibre reinforced cement.) |
NF P19-829-1-1998 |
预制混凝土产品.玻璃增强混凝土的试验方法.第1部分:基质坚硬度的测量.滑落试验方法 |
(Precast concrete products. Test method for glass-fibre reinforced cement. Part 1 : measuring the consistency of the matrix, “Slump test“ method.) |