标准号 |
中文名称 |
英文名称 |
| NF L17-781-1992 |
航空航天系列.纤维束.G起重性的测定 |
(AEROSPACE SERIES. ROVINGS. DETERMINATION OF THE FUZZ.) |
| NF L17-900-1998 |
航空航天系列.降落伞织物.机械规范起草指南 |
(AEROSPACE SERIES. PARACHUTE FABRIC. GUIDELINES FOR THE DRAFTING OF TECHNICAL SPECIFICATIONS.) |
| NF L17-900-2003 |
航空航天系列.降落伞织物.技术规范起草指南 |
(Aerospace series - Parachute fabric - Guidelines for the drafting of technical specifications.) |
| NF L17-910-1994 |
航空航天系列.降落伞织物.飞机翼布透气性的测定 |
(Aerospace series. Textiles for parachutes. Determination of the air permeability of wing fabrics.) |
| NF L17-911-1994 |
航空航天系列.降落伞.纺织物.布带和胶带的试验.耐磨试验方法 |
(AEROSPACE SERIES. PARACHUTES. TEXTILES. TESTING OF STRAPS AND TAPES. TEST METHOD FOR ABRASIVE WEAR.) |
| NF L17-913-1994 |
航空和航天系列.降落伞用织物.扭编部分的试验.直径或宽度和厚度和单位长度质量的测定 |
(AEROSPACE SERIES. TEXTILES FOR PARACHUTES. TESTS ON BRAIDED PARTS. DETERMINATION OF THE DIAMETER OR WIDTH AND THICKNESS AND THE LINEAR MASS.) |
| NF L17-914-1995 |
航空航天系列.降落伞织物.布带和胶带的试验.曲度的测定 |
(AEROSPACE SERIES. PARACHUTE FABRIC. TESTING OF STRAPS AND TAPES. DETERMINATION OF CURVATURE.) |
| NF L17-915-1995 |
航空航天系列.降落伞织物.布带和胶带的试验.扭接的测定 |
(AEROSPACE SERIES. PARACHUTE FABRIC. TESTING OF TAPES AND STRAPS. DETERMINATION OF KINKING.) |
| NF L17-916-1995 |
航空航天系列.降落伞纤维.扭编绳的试验.锥形细纱球的数目的测定 |
(AEROSPACE SERIES. PARACHUTE FABRIC. TESTING OF BRAIDED ROPE. DETERMINATION OF THE NUMBER OF YARN COPS.) |
| NF L17-917-1995 |
航空航天系列.降落伞纤维.扭编绳的试验.网织品的检测 |
(AREOSPACE SERIES. PARACHUTE FABRIC. TESTING OF BRAIDED ROPE. DETERMINATION OF MESHWORK.) |
| NF L17-918-1997 |
航空航天系列.降落伞纤维.扭编绳/编带和窄幅织物的试验.浸入冷水后尺寸变化的测定 |
(AEROSPACE SERIES. PARACHUTE FABRIC. TESTS ON BRAIDED ROPES/BRAIDS AND NARROW FABRICS. DETERMINATION OF DIMENSIONAL VARIATIONS AFTER IMMERSION IN COLD WATER.) |
| NF L17-919-1998 |
航空航天系列.编织材料试验.2/3拉力下断裂负载的测定 |
(AEROSPACE SERIES. TESTS ON BRAIDED ARTICLES. DETERMINATION OF THE BREAKING LOAD UNDER TRACTION AT 2/3 EXTENSION.) |
| NF L17-920-1999 |
航空航天系列.降落伞织物.布带和胶带的试验.连接长度和刚性的测定 |
(AEROSPACE SERIES. PARACHUTE FABRIC. TESTING OF STRAPS AND TAPES. DETERMINATION OF THE BENDING LENGTH AND RIGIDITY.) |
| NF L17-950-1995 |
航空工业.飞机结构纤维用合成纤维.试板的制备 |
(AIRCRAFT INDUSTRY. SYNTHETIC CLOTHS FOR THE FABRIC OF AIRPLANE STRUCTURES. REALIZATION OF TEST PANELS.) |
| NF L17-951-1995 |
航空工业.飞机结构纤维用合成纤维.风化后机械特性的测定 |
(Aircraft industry. Synthetic cloths for the fabric of airplane structures. Determination of the mechanical characteristics after weathering.) |
| NF L17-952-1995 |
航空工业.飞机结构纤维用合成纤维.浆纱并绞纤维粘结的剥离强度 |
(Aircraft industry. Synthetic cloths for the fabric of airplane structures. Peeling strength of the bonding of taping fabric.) |
| NF L17-953-1995 |
航空工业.飞机结构纤维用合成织物.发货时测定老化前后粘着保护的拉伸纤维的抗剪切强度 |
(Aircraft industry. Synthetic cloths for the fabric of airplane structures. Determination of shear sstrength by stretching cloths, in the delivery condition, stuck then protected before and after aging.) |
| NF L17-955-1995 |
飞机工业.飞机结构纤维用合成纤维.在发货条件下纤维的透气性和透湿性测量 |
(Aircraft industry. Synthetic cloths for the fabric of airplane structures. Determination of the permeability-wettability of cloths in deliverry condition.) |
| NF L17-956-1995 |
航空工业.飞机结构纤维用合成纤维.在交货条件下通过纤维的拉伸试验测定在折断状态下的负荷和拉伸率及无涂层 |
(Aircraft industry. Synthetic cloths for the fabric of airplane structures. Determination of the load and elongation at rupture by tensile testing of cloths in delivery condition and of free coated cloths.) |
| NF L17-990-1995 |
航空工业.木结构飞机用粘合剂.技术规范和试验方法 |
(AIRCRAFT INDUSTRY. ADHESIVES FOR WOODEN AIRPLANE STRUCTURES. TECHNICAL SPECIFICATION AND TEST METHODS.) |
| NF L17-996-1995 |
航空工业.转换的原木.技术规范,试验方法和使用条件 |
(Aircraft industry. Converted raw timber. Technical specification, test methods and conditions of use.) |
| NF L18-130-1995 |
航空航天系列.胶合板.供料规范和试验方法 |
(Aerospace series. Wood based panels. Procurement specification and test methods.) |
| NF L18-200-1968 |
喷管用石墨产品验收条件 |
(ACCEPTANCE CONDITIONS FOR GRAPHITE PRODUCTS FOR EXHAUST NOZZLES.) |
| NF L18-510-1969 |
透明塑料板 |
(SHEETS MADE OF TRANSPARENT PLASTICS MATERIAL.) |
| NF L18-510M1-1975 |
透明塑板 |
(TRANSPARENT PLASTIC MATERIAL, SHEETS.) |
| NF L19-003-1992 |
航空航天系列.件和非金属材料中的管腔蜂窝状材料 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS IN COMPONENT AND NON-METALLIC MATEIRALS. GENERALITIES.) |
| NF L19-031-1993 |
航空航天系列.管状单,六角形,玻璃纤维,酚醛树脂浸渍的蜂窝状材料.产品标准 |
(AEROSPACE SERIES. HONEYCOMB MATERIAL WITH TUBULAR CELLS, HEXAGONAL, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-032-1993 |
航空航天系列.管状单,矩形,玻璃纤维,酚醛树脂浸渍的蜂窝状材料.产品标准 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, RECTANGULAR, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-033-1993 |
航空航天系列.管状单,挠性,玻璃纤维,酚醛树脂浸渍的蜂窝状材料.产品标准 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, FLEXIBLE, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-034-1992 |
航空航天系列.蜂窝状材料.六方管腔.聚酰胺芳族纸,酚醛树脂浸渍的.标准产品 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL, POLYAMIDE AROMATIC PAPER, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-035-1993 |
航空航天系列.管状单、矩形、聚酰胺芳族纸和酚醛树脂浸渍的蜂窝型材料.产品标准 |
(AREOSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, RECTANGULAR, POLYAMIDE AROMATIC PAPER, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-036-1993 |
航空航天系列.管状单、挠性、聚酰胺芳族纸和酚醛树脂浸渍的蜂窝型材料.产品标准 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, FLEXIBLE, POLYAMIDE AROMATIC PAPER, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-037-1993 |
航空航天系列.管状单,六角形,碳纤维,酚醛树脂浸渍的蜂窝状材料.产品标准 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL CARBON FABRIC, PHENOLIC RESIN IMPREGNATED ORIENTED AT PLUS OVER MINUS. PRODUCT STANDARD.) |
| NF L19-040-1993 |
航空航天系列.管状单,六角形,玻璃纤维,酚醛树脂浸渍的蜂窝状材料,正负45度取向.产品标准 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS TUBULAR CELLS, HEXAGONAL, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED, ORIENTED AT PLUS OVER MINUS 45 DEGREES. PRODUCT STANDARD.) |
| NF L19-041-1993 |
航空航天系列.管状单,矩形,玻璃纤维,酚醛树脂浸渍的蜂窝状材料,正负45度取向.产品标准 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, RECTANGULAR, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED, ORIENTED AT PLUS OVER MINUS 45 DEGREES. PRODUCT STANDARD.) |
| NF L19-043-1993 |
航空航天系列.管状单,六角形,牛皮纸,酚醛树脂浸渍的蜂窝状材料.产品标准 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL, KRAFT PAPER, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.) |
| NF L19-046-1993 |
航空航天系列.管状单,六角形,玻璃纤维,聚酰亚胺树脂浸渍的蜂窝状材料,正负45度取向.产品标准 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL, FIBRE GLASS, POLYMIMIDE RESIN IMPREGNATED, ORIENTED AT PLUS OVER MINUS 45 DEGREES. PRODUCT STANDARD.) |
| NF L19-101-1-1992 |
航空和航天.用铝合金制的管形隔间器材.技术规范.一般要求 |
(AEROSPACE SERIES. HONEYCOMB MATEIRALS WITH TUBULAR CELLS IN ALUMINIUM ALLOYS. TECHNICAL SPECIFICATION. GENERAL REQUIREMENTS.) |
| NF L19-101-2-1992 |
航空和航天.用铝合金制的管形隔间器材.技术规范.六边形管形件的特殊要求 |
(AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS IN ALUMINIUM ALLOYS. TECHNICAL SPECIFICATION. SPECIAL REQUIREMENTS FOR HEXAGONAL TUBULAR CELLS.) |
| NF L19-103-1992 |
航空航天系列.复合的非金属热固性塑料浸渍材料.带管状心的蜂窝材料.技术规格.一般要求 |
(AREROSPACE SERIES. COMPOSITE AND NON-METALLIC THERMOPLASTIC IMPREGNATED MATERIALS. HONEYCOM MATERIALS WITH TUBULAR CELLS. TECHNICAL SPECIFICATION. GENERAL REQUIREMENTS.) |
| NF L19-106-1995 |
航空航天系列.研磨用的管状多孔材料.技术规范 |
(AEROSPACE SERIES. HONEYCOMB MATERIAL WITH TUBULAR CELLS FOR ABRADABLE APPLICATIONS. TECHNICAL SPECIFICATION.) |
| NF L20-010-1989 |
航空和航天.设备.NFE系列紧固件的选择 |
(AEROSPACE SERIES. EQUIPMENT. CHOICE OF FASTENERS,NF E SERIES.) |
| NF L20-020-1989 |
航空和航天系列.铆钉孔的尺寸 |
(AEROSPACE SERIES. HOLE SIZES FOR SOLID RIVETS. (EUROPEAN STANDARD EN 2309).) |
| NF L20-021-1995 |
航空航天系列.T型头螺栓孔和夹子的设计标准 |
(AEROSPACE SERIES. HOLES AND TRAPS FOR T-HEAD BOLTS DESIGN STANDARD. (EUROPEAN STANDARD EN 3202).) |
| NF L20-026-1995 |
航空航天系列.插销.尺寸和接头选择.设计标准 |
(Aerospace series. Spigots. Dimensions and fit selection. Design standard.) |
| NF L20-030-1996 |
航空航天系列.带柄螺母.60度型铁法兰安装孔.设计标准(欧洲标准EN 3149) |
(AEROSPACE SERIES. SHANK NUTS. INSTALLATION HOLES, 60 DEGREES SWAGE, FLANGES. DESIGN STANDARD. (EUROPEAN STANDARD EN 3149).) |
| NF L21-106-1975 |
铆钉用铝合金、钢、耐热不锈钢合金线材.尺寸 |
(Wires for rivets in aluminium alloys, steel, stainless and heat resisting alloys. Dimensions.) |
| NF L21-107-1975 |
铆钉用T40非合金钛线材.尺寸 |
(WIRES FOR RIVETS IN T40 PURE TITANIUM. DIMENSIONS.) |
| NF L21-110-1975 |
铆钉用 T４０非合金钛线材.技术规范 |
(WIRES FOR RIVETS IN T40 PURE TITANIUM. TECHNICAL SPECIFICATION.) |
| NF L21-201-1972 |
铝合金铆钉.产品标准 |
(ALUMINIUM ALLOY RIVETS. PRODUCT STANDARD.) |
| NF L21-202-1976 |
T４０非合金钛铆钉.技术规范 |
(T40 PURE TITANIUM RIVETS. TECHNICAL SPECIFICATION.) |
| NF L21-203-1974 |
钢铆钉.不锈钢和耐热合金铆钉.技术规范 |
(STEEL RIVETS. STAINLESS AND HEAT-RESISTING ALLOY RIVETS. TECHNICAL SPECIFICATION.) |
| NF L21-206-1967 |
航空工业用铆钉.标准铆钉标志 |
(RIVETS FOR THE AEROSPACE INDUSTRY. MARKING OF STANDARDIZED RIVETS.) |
| NF L21-208-1973 |
飞机表层埋头铆钉表面不平的公差 |
(FLUSH TOLERANCES OF COUNTERSUNK HEAD RIVETS WITH AIRCRAFT SURFACE COATING.) |
| NF L21-211-1980 |
铝合金制半埋头铆钉(英寸) |
(MUSHROOM HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).) |
| NF L21-212-1980 |
铝合金制平头铆钉(英寸) |
(PAN HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).) |
| NF L21-213-1980 |
铝合金制１２０°埋头铆钉(英寸) |
(120 DEGREES COUNTERSUNK HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).) |
| NF L21-214-1980 |
铝合金制１２０°半埋头铆钉(英寸) |
(RAISED 120 DEGREES COUNTERSUNK HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).) |
| NF L21-215-2000 |
紧固件.实心万向头铆钉 |
(Fasteners - Rivets, solid, universal head.) |
| NF L21-216-1980 |
铝合金制９０°埋头铆钉(英寸) |
(90 DEGREES COUNTERSUNK HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).) |
| NF L21-217-1979 |
１００°埋头铆钉 |
(100 DEGREES COUNTERSUNK HEAD RIVETS.) |
| NF L21-218-1982 |
百分之百埋头平圆头铆钉 |
(100 per cent countersunk flat button head rivets.) |
| NF L21-250-2000 |
紧固件.管形铆钉 |
(Fasteners - Rivets, tubular.) |
| NF L21-260-1978 |
“SL“型带30 NCD 16钢制杆的组合铆钉.技术规范 |
(“SL“ TYPE COMPOUND RIVET WITH 30 NCD 16 STEEL SHANK. TECHNICAL SPECIFICATION.) |
| NF L21-261-1982 |
“SL“型带30 NCD16钢制杆的标准型圆头组合铆钉 |
(“Sl“ type compound rivet with 30 ncd 16 steel shank. Cylindrical pan head. Standard type.) |
| NF L21-262-1982 |
“SL“型带30 NCD 16钢制杆的100°标准型埋头组合铆钉 |
(“Sl“ type compound rivet with 30 ncd 16 steel shank. 100 degrees countersunk head. Standard type.) |
| NF L21-263-1982 |
“SL“型带30 NCD 16钢制杆的T20型圆头组合铆钉 |
(“Sl“ type compound rivet with 30 ncd 16 steel shank. Cylindrical pan head. T 20 type.) |
| NF L21-264-1982 |
“SL“型带30 NCD 16钢制杆的 T20型100°埋头组合铆钉 |
(“Sl“ type compound rivet with 30 ncd 16 steel shank. 100 degrees countersunk head. T 20 type.) |
| NF L21-265-1982 |
“SL“型带30 NCD 16钢制杆的 T30型圆头组合铆钉 |
(“SL“ TYPE COMPOUND RIVET WITH 30 NCD 16 STEEL SHANK. CYLINDRICAL PAN HEAD. T 30 TYPE.) |
| NF L21-266-1982 |
“SL“型带30 NCD 16钢制杆的T30型100°埋头组合铆钉 |
(“SL“ TYPE COMPOUND RIVET WITH 30 NCD 16 STEEL SHANK. 100 DEGREES COUNTERSUNK HEAD. T 30 TYPE.) |
| NF L21-270-1981 |
“SL“型带T-A6V钛合金制杆组合铆钉.技术规范 |
(“Sl“ type compound rivet with T-A6V titanium alloys. Technical specification.) |
| NF L21-271-2000 |
紧固件.紧公差T-A6V钛合金杆并有2024铝合金环的凸头锁紧螺栓 |
(Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.) |
| NF L21-272-2000 |
紧固件.紧公差T-A6V钛合金杆并有2024铝合金环的100°埋头锁紧螺栓 |
(Fasteners - Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.) |
| NF L21-273-2000 |
紧固件.紧公差T-A６V铝合金杆并有XC１０钢环凸头锁紧螺栓 |
(Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.) |
| NF L21-274-2000 |
紧固件.紧公差T-A６V钛合金杆并有XC１０钢环１００°埋头锁紧螺栓 |
(Fasteners - Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.) |
| NF L21-311-1993 |
航空航天系列.铆钉,固体.通用头,铝1050A,英寸系列(EN 2143) |
(AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM 1050A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2143).) |
| NF L21-312-1994 |
航空系列.根据EN 2115标准中铝合金制一般头形实心铆钉 |
(AEROSPACES SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2117. INCH BASED SERIES. (EUROPEAN STANDARD EN 2144).) |
| NF L21-313-1994 |
航空系列.根据EN 2115标准中阳极氧化处理铝合金制一般头形实心铆钉 |
(AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2117, ANODIZED OR CHROMATED. INCH BASED SERIES. (EUROPEAN STANDARD EN 2145).) |
| NF L21-314-1993 |
航空航天系列.铆钉,固体.通用头,铝合金2017A,英寸系列(EN 2146) |
(AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2017A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2146).) |
| NF L21-316-1993 |
航空航天系列.铆钉,固体.通用头,铝合金5056A,英寸系列(EN 2148) |
(AEROSPACES SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 5056A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2148).) |
| NF L21-317-1996 |
航空系列.根据EN 2117标准中阳极氧化处理的铝合金制一般头形实心铆钉 |
(Aerospace series. Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series.) |
| NF L21-321-1993 |
航空航天系列.铆钉,固体,100级常规扩钻头,铝1050A,英寸系列(EN 2550) |
(AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD, IN ALUMINIUM 1050A,INCH BASED SERIES. (EUROPEAN STANDARD EN 2550).) |
| NF L21-322-1993 |
航空航天系列.铆钉,固体,100级常规有园顶的扩钻头,铝合金2117A,英寸系列(EN 2551) |
(AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2117, INCH BASED SERIES. (EUROPEAN STANDARD EN 2551).) |
| NF L21-323-1993 |
航空系列.带圆顶的,铝合金2177,阳极或铬酸盐处理的100级额定嵌入埋头孔的头,固体,铆钉 |
(AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2117, ANODIZED OR CHROMATED, INCH BASED SERIES. (EUROPEAN STANDARD EN 2552).) |
| NF L21-324-1993 |
航空航天系列.铆钉,固体,100级常规有园顶的扩钻头,铝合金2017A,英寸系列(EN 2553) |
(AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2017A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2553).) |
| NF L21-326-1993 |
航空航天系列.铆钉,固体,100级常规有园顶的扩钻头,铝合金5056A, 英寸系列(EN 2555) |
(AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 5056A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2555).) |
| NF L21-327-1993 |
航空航天系列.铆钉,固体,100级常规有园顶的扩钻头,铝合金5056A, 阳极氧化处理和铬酸处理,英寸系列(EN 2556) |
(AEROSPACE SEREIS. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 5056A, ANODIZED OR CHROMATED, INCH BASED SERIES. (EUROPEAN STANDARD EN 2556).) |
| NF L21-411-1996 |
航空系列.耐蚀钢FE-PA11制钝化带通用头的全铆钉.英制系列 |
(AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN CORROSION RESISTING STEEL FE-PA11, PASSIVATED, INCH BASED SERIES. (EUROPEAN STANDARD EN 3135).) |
| NF L21-412-1996 |
航空系列.耐蚀钢FE-PA92HT制钝化带通用头的全铆钉.英制系列 |
(AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN CORROSION RESISTING STEEL FE-PA92HT, PASSIVATED, INCH BASED SERIES. (EUROPEAN STANDARD EN 3136).) |
| NF L21-414-1996 |
航空系列.耐高温镍基合金钢NI-P11制镀镉带通用头的全铆钉.英制系列 |
(AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P11, CADMIUM PLATED, INCH BASED SERIES. (EUROPEAN STANDARD EN 3141).) |
| NF L21-415-1996 |
航空系列.耐高温镍基合金钢NI-P11制带通用头的全铆钉.英制系列 |
(AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P11, INCH BASED SERIES. (EUROPEAN STANDARD EN 3142).) |
| NF L21-416-2001 |
航空航天系列.耐腐蚀钢FE-PA2601制钝化英制100度沉头标称凸头的实心铆钉 |
(Aerospace series - Rivets, solid, 100 o countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series.) |
| NF L21-417-2001 |
航空航天系列.耐腐蚀钢FE-PA11制钝化英制100度标称沉头的实心铆钉 |
(Aerospace series - Rivets, solid, 100 o countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series.) |
| NF L21-418-2001 |
航空航天系列.耐腐蚀钢FE-PA2601制钝化英制100度标称沉头的实心铆钉 |
(Aerospace series - Rivets, solid, 100 o countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series.) |
| NF L21-421-1997 |
航空系列.T1-P02钛制阳极处理英寸系列圆顶100度通用沉头实心铆钉 |
(AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES COUNTERSUNK NORMAL HEAD WITH DOME, IN TITANIUM TI-P02, ANODIZED, INCH BASED SERIES. (EUROPEAN STANDARD EN 3642).) |
| NF L21-422-1997 |
航空系列.T1-P02钛制阳极处理英寸系列100度通用沉头实心铆钉 |
(AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES COUNTERSUNK NORMAL HEAD, IN TITANIUM TI-P02, ANODIZED, INCH BASED SERIES. (EUROPEAN STANDARD EN 3643).) |
| NF L21-423-1997 |
航空系列.T1-P02钛制阳极处理英寸系列100度通用沉头实心铆钉 |
(AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN TITANIUM TI-P02, ANODIZED, INCH BASED SERIES. (EUROPEAN STANDARD EN 3644).) |
| NF L22-023-1967 |
飞行器紧固件标准一览表.符合B.N.A.E.公差的ISO螺纹 |
(LIST OF STANDARDS FOR AIRCRAFT FASTENERS. ISO THREADS TO B.N.A.E. TOLERANCES.) |
| NF L22-024-1967 |
飞行器紧固件标准一览表.符合ISO公差的ISO螺纹 |
(LIST OF STANDARDS FOR AIRCRAFT FASTENERS. ISO THREADS TO ISO TOLERANCES.) |
| NF L22-030-1966 |
飞行器紧固件.钢号和机械特性.(RECH.) |
(AIRCRAFT FASTENERS. STEEL GRADES AND MECHANICAL PROPERTIES. (RECH.).) |
| NF L22-031-2003 |
紧固件.金属材料的选择 |
(Fasteners - Selection of metallic materials.) |
| NF L22-035-1966 |
飞行器紧固件.标志.(RECH.) |
(AIRCRAFT FASTENERS. MARKING. (RECH.).) |
| NF L22-040-1956 |
航空螺栓螺母.使用公差.国际单位制螺纹 |
(AIRCRAFT FASTENERS. MANUFACTURING TOLERANCES. (RECH.).) |
| NF L22-062-1966 |
用扳手操作的紧固件的ISO对边 |
(ISO ACROSS FLATS FOR FASTENERS WITH SPANNER DRIVE.) |
| NF L22-063-1970 |
用板手操作的螺母、螺钉和轴的间隙 |
(CLEARANCE FOR WRENCHING NUTS,SCREWS AND PINS.) |
| NF L22-070-1976 |
螺钉的BNAE型十字槽 |
(CROSS RECESS (B.N.A.E.).) |
| NF L22-071-1976 |
NFL ２２-０７０ 型螺钉十字槽用螺丝刀头 |
(SCREW-DRIVER END FOR CROSS RECESS ACCORDING TO NF L 22-070.) |
| NF L22-072-1991 |
航天建筑.螺丝.920型十字槽 |
(Aerospace construction. Bolts and screws. 92 degrees cruciform recess.) |
| NF L22-090-1966 |
修配用大直径标准螺钉、销和垫圈 |
(STANDARDIZED SCREWS,PINS AND WASHERS WITH INCREASED DIAMETER INTENDED FOR REPAIR WORK.) |
| NF L22-111-1975 |
无销孔六角头螺钉.国际单位制螺纹 |
(Hexagon head bolts without split pin hole. Sim thread (rech.).) |
| NF L22-112-1975 |
带销孔六角头螺钉.国际单位制螺纹 |
(Hexagon head bolts with split pin hole. Sim thread (rech.).) |
| NF L22-121-1975 |
带轻杆无锁孔六角头螺钉.国际单位制螺纹 |
(Hexagon head bolts with waisted shank without split pin hole. Sim thread (rech.).) |
| NF L22-122-1975 |
带轻杆有销孔六角头螺钉.国际单位米制螺纹 |
(Hexagon head bolts with waisted shank with split pin hole. Sim thread.) |
| NF L22-125-1985 |
六角头承拉螺钉ISO 螺纹４h 类 |
(Bolt, hexagonal head, for tensile application, . ISO thread 4H class.) |
| NF L22-126-1985 |
带锁紧孔六角头承拉螺钉.ISO螺纹４h 类 |
(Bolt, hexagonal head, with locking hole, for tensile application. ISO thread 4H class.) |
| NF L22-127-1985 |
带颈杆六角头承拉螺钉.ISO螺 纹４h 类 |
(Bolt, hexagonal head, necked shank, for tensile application. ISO thread 4H class.) |
| NF L22-128-1985 |
带颈杆有锁紧孔六角头承拉螺钉.ISO 螺纹４h 类 |
(Bolt, hexagonal head, necked shank, with locking hole, for tensile application. ISO thread 4H class.) |
| NF L22-129-1985 |
带销孔六角头承拉螺钉.ISO 螺纹４h 类 |
(Bolt, hexagonal head, with split pin hole, for tensile application. ISO thread 4H class.) |
| NF L22-134-1975 |
无销孔六角头槽制螺钉.国际单位制螺纹 |
(Precision hexagon head bolts without split pin hole. Sim thread (rech.).) |
| NF L22-135-1975 |
带销孔六角头槽制螺钉.国际单位制螺纹 |
(Precision hexagon head bolts with split pin hole. Sim thread (rech.).) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com