标准号 |
中文名称 |
英文名称 |
| NF T34-555-6-1998 |
涂料和清漆.防护漆系统对钢结构的腐蚀防护.第6部分:实验室性能试验方法 |
Protection paints and varnishes. Corrosion of steel structures by protective paint systems. Part 6 : laboratory performance test methods. |
| NF T34-555-7-1998 |
涂料和清漆.防护漆系统对钢结构的腐蚀防护.第7部分:涂漆工艺的实施和监督 |
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 7 : execution and supervision of paint work. |
| NF T34-555-8-1998 |
涂料和清漆.防护漆系统对钢结构的腐蚀防护.第8部分:新工艺和维修规范的制定 |
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 8 : development of specifications for new work and maintenance. |
| NF T34-600-1997 |
涂料和清漆.防护喷涂系统的钢结构的腐蚀防护.C 5M级规范 |
PAINTS AND VARNISHES. CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS. SPECIFICATIONS OF C 5M CLASS. |
| NF T34-721-1-1996 |
涂料和清漆.外部砖石建筑和混凝土用涂覆材料和系统.第1部分:分类 |
PAINTS AND VARNISHES. COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE. PART 1 : CLASSIFICATION. (EUROPEAN STANDARD EN 1062-1). |
| NF T34-721-11-2002 |
涂料和清漆.外部砖石和混凝土用涂层材料和涂层系统.第11部分:检验前调和方法 |
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 11 : methods of conditioning before testing. |
| NF T34-721-2-1999 |
涂料和清漆.外部砖石工程和混凝土用涂覆材料和涂覆系统.第2部分:水蒸气渗透率的测定和分类 |
PAINTS AND VARNISHES. COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE. PART 2: DETERMINATION AND CLASSIFICATION OF WATER-VAPOUR TRANSMISSION RATE (PERMEABILITY). (EUROPEAN STANDARD EN ISO 7783-2). |
| NF T34-721-3-1999 |
涂料和清漆.外部砖石和混凝土用涂层材料和系统.第3部分:液体-水透过率的测定和分类(渗透性) |
PAINTS AND VARNISHES. COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONTRETE. PART 3 : DETERMINATION AND CLASSIFICATION OF LIQUID-WATER TRANSMISSION RATE (PERMEABILITY). (EUROPEAN STANDARD EN 1062-3). |
| NF T34-721-6-2002 |
涂料和清漆.外部砖石和混凝土用涂层材料和涂层系统.第6部分:二氧化碳渗透性的测定 |
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6 : determination of carbon dioxide permeability. |
| NF T34-750-1-2003 |
涂料和清漆.建筑用铝及铝合金涂层.第1部分:粉末涂覆材料制涂层 |
(Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1 : coatings prepared from powder coating materials.) |
| NF T35-004-1990 |
涂料和清漆的涂刷和干燥用具.喷漆.在空气中喷射的测量方法 |
Installations for application and drying of paints and varnishes. Application and combined booths. Application by spraying. Methods of measurement of rejects to atmosphere. |
| NF T35-008-1986 |
涂料和清漆的涂刷和干燥用具.涂刷室和调和室.各类顶目查询表 |
INSTALLATION FOR THE APPLICATION AND DRYING OF PAINTS AND VARNISHES TYPE ITEMS FOR ENQUIRY. |
| NF T35-009-1989 |
涂料和清漆的涂刷及干燥设施.喷漆间.概念.设计特性和测量方法 |
Installations for application and drying of paints and varnishes. Spray paint booths. Design, working characteristics and measurement methods. |
| NF T35-010-2000 |
释放易燃物质的烘箱.安全要求 |
Dryers and ovens, in which flammable substances are released - Safety requirements. |
| NF T35-011-1990 |
色漆和清漆涂刷和干燥器具.内部无操作员的喷漆室.设计.工作性能和测量方法 |
INSTALLATIONS FOR APPLICATION AND DRYING OF PAINTS AND VARNISHES. POWDER BOOTHS WITHOUT OPERATOR INSIDE THE BOOTH. DESIGN,WORKING CHARACTERISTICS AND MEASUREMENT METHODS. |
| NF T35-013-1992 |
涂料和清漆涂刷和干燥器具.涂料制备和使用工具用清洁设备的打开装置和关闭机械.设计、工作性能和测量方法 |
INSTALLATIONS FOR APPLICATION AND DRYING OF PAINTS AND VARNISHES. OPEN EQUIPMENTS AND CLOSED MACHINES FOR CLEANING EQUIPMENTS FOR PREPARATION AND APPLICATION OF PAINTS. DESIGN,WORKING,CHARACTERISTICS AND MEASUREMENT METHODS. |
| NF T35-014-1992 |
色漆和清漆喷涂和干燥用器具.色漆调制箱.设计、工作特性 |
INSTALLATIONS FOR APPLICATION AND DRYING OF PAINTS AND VARNISHES. BOX FOR PREPARATION OF PAINTS. DESIGN,WORKING CHARACTERISTICS. |
| NF T35-020-2003 |
液体涂层材料用喷雾和喷射设备转换效率的测定.第1部分:平板 |
(Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Part 1 : flat panels.) |
| NF T35-202-1998 |
涂覆材料的雾化和喷射设备.安全要求(欧洲标准EN 1953) |
ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS. SAFETY REQUIREMENTS. (EUROPEAN STANDARD EN 1953). |
| NF T35-501-1-2001 |
涂料和有关产品使用前钢衬底的制备.表面清洁度的视觉评价.第1部分:未涂覆钢衬底和已有覆层全部除去后钢衬底的锈蚀等级和制备等级.补充信息:用不同磨料喷砂清理时钢表面变化的典型照相实例 |
|
| NF T35-501-2-2001 |
涂料和有关产品使用前钢衬底的制备.表面清洁度的视觉评价.第2部分:已有覆层局部除去后已涂覆钢衬底的制备等级 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2 : preparation grades of previously coated steel substrates after localized removal of previous coatings. |
| NF T35-502-2-1999 |
涂料和有关产品使用前钢衬底的制备.表面清洁度的评定试验.第2部分:已清洁表面氯化物的实验室测定 |
Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Part 2 : laboratory determination of chloride on cleaned surfaces. |
| NF T35-502-3-1999 |
涂料和有关产品使用前钢衬底的制备.表面清洁度的评定试验.第3部分:涂漆钢表面灰尘评定(压敏带法) |
|
| NF T35-502-4-1999 |
涂料和有关产品使用前钢衬底的制备.表面清洁度的评定试验.第4部分:涂料涂覆前凝结可能性的评定导则 |
Preparation of steel substrates before application of paint and related products. Tests for the assessment of surface cleanliness. Part 4 : guidance on the estimation of the probability of condensation prior to paint application. |
| NF T35-502-6-1999 |
涂料和有关产品使用前钢衬底的制备.表面清洁度的试验.第6部分:Bresle法分析用可溶性杂质的析取 |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS. PART 6 : EXTRACTION OF SOLUBLE CONTAMINANTS FOR ANALYSIS. THE BRESLE METHOD. (EUROPEAN STANDARD EN ISO 8502-6). |
| NF T35-502-9-2001 |
涂料和有关产品使用前钢衬底的制备.表面清洁度的评定试验.第9部分:水溶盐电导仪测定的现场方法 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9 : field method for the conductometric determination of water-soluble salts. |
| NF T35-503-1-1995 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第一部分:喷砂处理表面的ISO评定比较样板的规范和定义(EN ISO 8503-1) |
|
| NF T35-503-2-1995 |
涂料和有关产品使用前的钢衬底的制备. 喷丸处理钢基体的表面粗糙度.第二部分:喷砂处理表面的定级方法.比较程序(EN ISO 8503-2) |
|
| NF T35-503-3-1995 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第三部分:ISO表面轮廓比较仪的校准方法和表面轮廓的测定方法.显微镜的调焦方法 |
|
| NF T35-503-4-1995 |
涂料和有关产品使用前的钢衬底的制备.喷丸处理钢基体的表面粗糙度.第四部分:ISO表面轮廓比较仪的校准方法和表面轮廓的测定方法.触针仪器的方法 |
|
| NF T35-504-1-2001 |
涂料和有关产品使用前钢衬底的制备.表面制备方法.第1部分:通用原理 |
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1 : general principles. |
| NF T35-504-2-2001 |
涂料和有关产品使用前钢衬底的制备.表面制备方法.第2部分:喷砂清理 |
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2 : abrasive blast-cleaning. |
| NF T35-504-3-2001 |
涂料和有关产品使用前钢衬底的制备.表面制备方法.第3部分:手工工具和电动工具清洗 |
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3 : hand- and power-tool cleaning. |
| NF T35-505-1-1997 |
在涂漆和涂类似产品前钢衬底的加工.金属清洗磨料规范.第1部分:一般介绍和分类(欧洲标准EN ISO 11124-1) |
Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Part 1 : general introduction and classification. |
| NF T35-505-3-1997 |
用涂层材料涂覆前钢表面的准备工作.金属喷射清洁材料的要求.第3部分:高碳铸钢喷丸及砂粒(EN ISO 11124-3) |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. SPECIFICATIONS FOR METALLIC BLAST-CLEANING ABRASIVES. PART 3 : HIGH-CARBON CAST-STEEL SHOT AND GRIT. (EUROPEAN STANDARD EN ISO 11124-3). |
| NF T35-505-4-1997 |
涂料和相关产品应用前钢铁衬底的准备.金属喷砂清理磨损的规范.第4部分:低碳铸钢的喷射(EN ISO 11124-4) |
Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Part 4 : low-carbon cast-steel shot. |
| NF T35-505-7-1999 |
涂料和相关制品使用前钢衬底的制备.非金属喷砂清理磨料的规范.第7部分:熔融氧化铝 |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 7 : FUSED ALUMINIUM OXIDE. (EUROPEAN STANDARD EN ISO 11126-7). |
| NF T35-506-1994 |
色漆和清漆.锌粉工厂底漆.衬底的次级制备的定义 |
PAINTS AND VARNISHES. ZINC DUST SHOP PRIMERS. DEFINITION OF SECONDARY PREPARATION GRADES OF SUBSTRATES. |
| NF T35-507-6-1997 |
涂料和相关产品应用前钢衬垫的制备.金属喷砂清洗粘结剂的试验方法.第6部分:外来物质的测定(EN ISO 11125-6) |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR METALLIC BLAST-CLEANING ABRASIVES. PART 6 : DETERMINATION OF FOREIGN MATTER. (EUROPEAN STANDARD EN ISO 11125-6). |
| NF T35-507-7-1997 |
涂料和相关产品应用前钢衬垫的制备.金属喷砂清洗粘结剂的试验方法.第7部分:湿度的测定(EN ISO 11125-7) |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR METALLIC BLAST-CLEANING ABRASIVES. PART 7 : DETERMINATION OF MOISTURE. (EUROPEAN STANDARD EN ISO 11125-7). |
| NF T35-508-4-1998 |
涂料和相关产品使用前钢衬底的制备.非金属喷砂清理磨料的规范 第4部分:煤炉炉渣(EN ISO 11126-4) |
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Part 4 : coal furnace slag. |
| NF T35-508-5-1998 |
涂料和相关产品使用前钢衬底的制备.非金属喷涂清砂磨料的规范.第5部分:炼镍矿渣(EN ISO 11126-5) |
Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Part 5 : nickel refinery slag. |
| NF T35-508-6-1997 |
涂料和相关产品使用前钢衬底的制备.非金属喷涂清砂磨料的规范.第5部分:炼镍矿渣(EN ISO 11126-6) |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 6 : IRON FURNACE SLAG. (EUROPEAN STANDARD EN ISO 11126-6). |
| NF T35-508-8-1997 |
涂料及相关产品应用前钢衬垫的制备.非金属喷砂清理磨料规范.第8部分:橄榄砂(EN ISO 11126-8) |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 8 : OLIVINE SAND. (EUROPEAN STANDARD EN ISO 11126-8). |
| NF T35-509-1-1997 |
涂料及相关产品应用前钢衬垫的制备.非金属喷砂清理磨料试验方法.第1部分:抽样(EN ISO 11127-1) |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 1 : SAMPLING. (EUROPEAN STANDARD EN ISO 11127-1). |
| NF T35-509-4-1997 |
涂料及相关产品应用前钢衬垫的制备.非金属喷砂清理磨料试验方法.第4部分:玻璃载片试验评估硬度(EN ISO 11127-4) |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 4 : ASSESSMENT OF HARDNESS BY A GLASS SLIDE TEST. (EUROPEAN STANDARD EN ISO 11127-4). |
| NF T35-509-5-1997 |
涂料及相关产品应用前钢衬垫的制备.非金属喷砂清理磨料试验方法.第5部分:湿度测定(EN ISO 11127-5) |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 5 : DETERMINATION OF MOISTURE. (EUROPEAN STANDARD EN ISO 11127-5). |
| NF T35-509-6-1997 |
涂料及相关产品应用前钢衬垫的制备.非金属喷砂清理磨料试验方法.第6部分:导电率测定水溶性污染物(EN ISO 111127-6) |
PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 6 : DETERMINATION OF WATER-SOLUBLE CONTAMINANTS BY CONDUCTIVITY MEASUREMENT. (EUROPEAN STANDARD EN ISO 11127-6) |
| NF T35-520-1997 |
涂料和清漆.已涂覆钢衬垫的制备.高压水喷洗 |
PAINTS AND VARNISHES. PREPARATION OF STEEL SUBSTRATES ALREADY COATED. HIGH-PRESSURE WATER JETTING CLEANING. |
| NF T36-001-1-1996 |
色漆和清漆.涂层材料的术语和定义.第1部分:一般术语 |
PAINTS AND VARNISCHES. TERMS AND DEFINITIONS FOR COATING MATERIALS. PART 1 : GENERAL TERMS. (EUROPEAN STANDARD EN 971-1). |
| NF T36-001-3-1999 |
涂料和清漆.涂覆材料的术语和定义.第3部分:表面特性和应用方法 |
Paints and varnishes. Terms and definitions for coating materials. Part 3 : surface preparation and methods of application. |
| NF T36-004-1-1988 |
涂料和清漆.颜色测定.第1部分:原理 |
Paints and varnishes. Colorimetry. Part 1 : principles. |
| NF T36-004-2-1988 |
涂料和清漆.颜色测定.第2部分:颜色的测量 |
Paints and varnishes. Colorimetry. Part 2 : colour measurement. |
| NF T36-004-3-1988 |
涂料和清漆.颜色测定.第3部分:颜色差异计算方法 |
Paints and varnishes. Colorimetry. Part 3 : calculation of colour differences. |
| NF T36-010-2002 |
涂料和清漆.等效术语表 |
Paints and varnishes - List of equivalent terms. |
| NF T37-001-0-2001 |
镀金属线圈.试验方法.第0部分:总说明和试验方法清单 |
Coil coated metals - Test methods - Part 0 : general introduction and list of test methods. |
| NF T37-001-1-2001 |
镀金属线圈.试验方法.第1部分:镀层厚度 |
Coil coated metals - Test methods - Part 1 : coating thickness. |
| NF T37-001-10-2001 |
镀金属线圈.试验方法.第10部分:抗紫外线荧光和水冷凝 |
Coil coated metals - Test methods - Part 10 : resistance to fluorescent UV light and water condensation. |
| NF T37-001-13-2001 |
卷材覆层金属.试验方法.第13部分:耐热加速老化性能 |
Coil coated metals - Test methods - Part 13 : resistance to accelerated ageing by the use of heat. |
| NF T37-001-14-2001 |
卷材覆层金属.试验方法.第14部分:粉化(Helmen法) |
Coil coated metals - Test methods - Part 14 : chalking (Helmen method). |
| NF T37-001-15-2002 |
卷材覆层金属.试验方法.第15部分:位变异构 |
Coil coated metals - Test methods - Part 15 : metamerism. |
| NF T37-001-18-2002 |
卷材覆层金属.试验方法.第18部分:耐染色性 |
(Coil coated metals - Test methods - Part 18 : resistance to staining.) |
| NF T37-001-2-2001 |
镀金属线圈.试验方法.第2部分:抛光光泽 |
(Coil coated metals - Test methods - Part 2 : specular gloss.) |
| NF T37-001-21-2003 |
卷材覆层金属.试验方法.第22部分:户外暴露板材的评定 |
(Coil coated metals - Test methods - Part 21 : evaluation of outdoor exposed panels.) |
| NF T37-001-22-2003 |
卷材覆层金属.试验方法.第22部分:色差.外观比对 |
(Coil coated metals - Test methods - Part 22 : colour difference - Visual comparison.) |
| NF T37-001-23-2002 |
卷材覆层金属.试验方法.第23部分:在含二氧化硫的湿气中的颜色稳定性 |
(Coil coated metals - Test methods - Part 23 : colour stability in humid atmospheres containing sulfur dioxide.) |
| NF T37-001-3-2001 |
镀金属线圈.试验方法.第3部分:色差.仪器比对 |
(Coil coated metals - Test methods - Part 3 : colour difference - Instrumental comparison.) |
| NF T37-001-4-2001 |
镀金属线圈.试验方法.第4部分:铅笔硬度 |
(Coil coated metals - Test methods - Part 4 : pencil hardness.) |
| NF T37-001-5-2001 |
镀金属线圈.试验方法.第5部分:耐高速压缩(冲击试验) |
(Coil coated metals - Test methods - Part 5 : resistance to rapid deformation (impact test).) |
| NF T37-001-6-2002 |
卷材覆层金属.试验方法.第6部分:压痕后的粘着力(杯突试验) |
(Coil coat metals - Test methods - Part 6 : adhesion after indentation (cupping test).) |
| NF T37-001-7-2001 |
镀金属线圈.试验方法.第7部分:抗弯曲断裂性(T弯曲试验) |
(Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test).) |
| NF T37-001-8-2002 |
卷材覆层金属.试验方法.第8部分:耐盐雾试验 |
Coil coated metals - Test methods - Part 8 : resistance to salt spray (fog). |
| NF T37-001-9-2001 |
卷材覆层金属.试验方法.第9部分:耐水浸性能 |
Coil coated metals - Test methods - Part 9 : resistance to water immersion. |
| NF T40-001-1977 |
橡胶.词汇 |
RUBBER.VOCABULARY. |
| NF T40-002-1988 |
橡胶及其胶乳.术语 |
Rubber and latices. Nomenclature. |
| NF T40-101-1979 |
橡胶.试样调理和试验的标准温度、湿度和延续时间 |
RUBBER. TEST SPECIMEN. CONTROLLED ATMOSPHERES. TEST ATMOSPHERES. |
| NF T40-102-1972 |
橡胶.一般性能 |
RUBBER.GENERAL PROPERTIES. |
| NF T40-103-1988 |
橡胶和合成橡胶.硫化和试验的间歇 |
VULCANIZED RUBBER. INTERVAL OF TIME BETWEEN VULCANIZATION AND TESTS. |
| NF T40-104-1976 |
橡胶.高于或低于常温的试验温度的一般规定 |
RUBBER. GENERAL DIRECTIONS FOR ACHIEVING ELEVATED OR SUBNORMAL TEMPERATURES FOR TESTS. |
| NF T40-107-1987 |
橡胶配方配合剂.缩略语 |
Rubber compounding ingredients. Abbreviations. |
| NF T40-201-1976 |
轮胎.定义.词汇 |
TYRES. DEFINITIONS. VOCABULARY |
| NF T40-202-1976 |
橡胶和合成橡胶.内胎.两种语言（英、法）品名表 |
TYRE TUBES. BILINGUAL NOMENCLATURE (ENGLISH/FRENCH). |
| NF T42-001-1991 |
橡胶胶乳.取样 |
Rubber latex. Sampling. |
| NF T42-002-1966 |
橡胶和同类合成橡胶.胶乳干胶膜的制备 |
RUBBER AND SIMILAR ELASTOMERS. PREPARATION OF DRY FILMS OF LATEX. |
| NF T42-003-1987 |
橡胶乳.固体物质总含量测定 |
Rubber latices. Determination of total solids content. |
| NF T42-004-1987 |
天然橡胶胶乳.干胶含量的测定 |
Rubber latex, natural. Determination of dry rubber content. |
| NF T42-005-1987 |
橡胶乳.碳碱性测定 |
Rubber latex, natural. Determination of alkalinity. |
| NF T42-007-1973 |
橡胶和同类合成橡胶.天然橡胶胶乳中水提取物的测定 |
RUBBER AND SIMILAR ELASTOMERS. DETERMINATION OF AQUEOUS EXTRACT OF NATURAL RUBBER LATEX. |
| NF T42-010-1997 |
橡胶胶乳.凝结物(筛余物)含量的测定 |
Rubber latex. Determination of coagulum content (sieve residue). |
| NF T42-011-1987 |
橡胶乳.粘度测定 |
Rubber latex. Determination of viscosity. |
| NF T42-013-1987 |
天然橡胶乳.氢氧化钾值测定 |
Rubber latex, natural. Determination of koh number. |
| NF T42-015-1997 |
橡胶胶乳.5℃-40℃间密度的测定 |
Rubber latex. Determination of density between 5 degrees Celsius and 40 degrees Celsius. |
| NF T42-016-1987 |
天然橡胶胶乳浓缩物.挥发性脂肪酸值的测定 |
Natural rubber latex concentrate. Determination of volatile fatty acid number. |
| NF T42-017-1987 |
天然橡胶胶乳浓缩物.硼酸含量的测定 |
Natural rubber latex concentrate. Determination of boric acid content. |
| NF T42-018-1987 |
合成橡胶乳.高速机械稳定性测定 |
Rubber latex, synthetic. Determination of high-speed mechanical stability. |
| NF T42-019-1987 |
天然橡胶胶乳浓缩物.残渣含量的测定 |
Natural rubber latex concentrate. Determination of sludge content. |
| NF T42-020-1977 |
胶乳稠化临界温度的测定 |
DETERMINATION OF THE CRITICAL THICKENING TEMPERATURE OF LATICES. |
| NF T42-021-1978 |
胶乳表面张力的测定 |
DETERMINATION OF THE SURFACE TENSION OF LATEX RUBBER. |
| NF T42-050-1987 |
合成橡胶胶乳.调制 |
Rubber latex, synthetic. Codification. |
| NF T42-051-1977 |
橡胶.腈浆.丙烯腈残渣含量的测定 |
RUBBER.NITRILE LATEX.DETERMINATION OF RESIDUAL ACRYLONITRILE CONTENT. |
| NF T42-101-1975 |
蒸发、保存天然橡胶胶乳.规范 |
NATURAL RUBBER LATEX EVAPORATED,PRESERVED - SPECIFICATION |
| NF T43-002-1954 |
橡胶.一定伸张度时单位负载能力的测定 |
RUBBER. DETERMINATION OF STRESS BY UNIT AREA CORRESPONDING TO A FIXED ELONGATION. |
| NF T43-003-1994 |
自然合成生橡胶.取样及进一步准备程序 |
RUBBER, RAW, NATURAL SYNTHETIC. SAMPLING AND FUTHER PREPARATIVE PROCEDURES. |
| NF T43-005-1991 |
非硫化橡胶.带圆切刀的稠度汁的使用方法 |
Non vulcanized rubber. Methods using a shearing disk viscometer. |
| NF T43-006-1997 |
橡胶试验混合料.制备、混合和硫化.设备和程序 |
Rubber test mixes. Preparation, mixing and vulcanization. Equipment and procedures. |
| NF T43-007-1994 |
生合成橡胶.单件橡胶捆的标志 |
Raw synthetic rubber. In bales form. Individual marking. |
| NF T43-009-1988 |
橡胶和合成橡胶.异丁烯一异戊二烯橡胶.试验方法 |
RUBBER,ISOBUTENE-ISOPRENE (IIR). EVALUATION PROCEDURES. |
| NF T43-010-1983 |
丁二烯一苯乙烯橡胶和加油丁二烯一苯乙烯.乳状聚合物型.试验配方和硫化特性的评定 |
STYRENE-BUTADIENE RUBBERS (SBR) AND OIL EXTENDED STYRENE BUTADIENE. EMULSION POLYMERISED TYPES. TEST RECIPE AND EVALUATION OF VULCANISATION CHARACTERISTICS. |
| NF T43-011-1992 |
聚丁橡胶.溶液聚合型.评定方法 |
RUBBER, BUTADIENE (BR). SOLUTION-POLYMERIZED TYPES. EVALUATION PROCEDURE. |
| NF T43-012-1992 |
异戊二烯橡胶(IR).非油扩散的溶液聚合型.评定程序 |
ISOPRENE RUBBER (IR). NON-OIL-EXTENDED, SOLUTION-POLYMERIZED TYPES. EVAUATION PROCEDURE. |
| NF T43-013-1994 |
非硫化橡胶.塑性测定.快速塑度计测定法 |
Unvulcanized rubber. Determination of plasticity. Rapid-plastimeter method. |
| NF T43-015-1996 |
橡胶.振荡式硫化计测定橡胶混料硫化特性 |
Rubber. Measurement of vulcanization characteristics with the oscillating curemeter. |
| NF T43-016-1976 |
橡胶.橡胶混料挤压成形性能的评定 |
EVALUATION OF THE EXTRUDABILITY OF RUBBER-BASED MIXTURES. |
| NF T43-017-1992 |
氯丁橡胶.通用型.评定方法 |
RUBBER, CHLOROPRENE RUBBER (CR). GENERAL PURPOSE TYPES. EVALUATION PROCEDURE. |
| NF T43-018-1992 |
乙丙二烯橡胶(EPDR).通用型.评定程序 |
RUBBER, ETHYLENE-PROPYLENE-DIENE (EPDM). GENERAL PURPOSE TYPES. EVALUATION PROCEDURE. |
| NF T43-019-1979 |
橡胶.生橡胶.平行板塑性计的可塑性和弹性恢复的测定 |
RAW RUBBER. MEASUREMENT OF PLASTICITY AND ELASTIC RECOVERY USING A PLASTOMETER WITH PARALLEL PLATES. |
| NF T43-020-1992 |
丁腈橡胶.评定方法 |
RUBBER, ACRYLONITRILE-BUTADIENE (NBR). EVALUATION PROCEDURE. |
| NF T43-021-1996 |
卤化异丁烯一异戊二烯橡胶(BIIR和CIIR).鉴定程序 |
RUBBER, HALOGENATED ISOBUTENE-ISOPRENE (BIIR AND CIIR). EVALUATION PROCEDURE. |
| NF T43-022-1992 |
丁苯橡胶(炭黑或炭黑和油母炼胶).评定方法 |
RUBBER, STYRENE-BUTADIENE (CARBON BLACK OR CARBON BLACK AND OIL MASTERBATCHES). EVALUATION PROCEDURE. |
| NF T43-101-1992 |
生橡胶丙酮萃取物的测定 |
Determination of the acetone extract from raw rubber. |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com