标准号 |
中文名称 |
英文名称 |
| NF L36-210-1989 |
航空和航天系列.嵌入操纵缆索的钢制抗腐蚀球面接头.尺寸和负载 |
(AEROSPACE SERIES. BALL-ENDS,IN CORROSION RESISTING STEEL SWAGED ON TYPE,CONTROL CABLE. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2362).) |
| NF L36-211-1989 |
航空系列.操纵缆索的拉紧螺杆接头.尺寸 |
(AEROSPACE SERIES. LOCKING CLIPS FOR TURNBUCKLES OF CONTROL CABLES. DIMENSIONS. (EUROPEAN STANDARD EN 2363).) |
| NF L36-212-1989 |
航空和航天系列.铜锌合金制拉紧螺杆套筒.尺寸和负载 |
(Aerospace series. Turnbarrels, control cable in copper-zinc alloys. Dimensions and loads.) |
| NF L36-213-1992 |
航空航天系列.带螺纹杆的、可调、自动对心球轴承的杆端尺寸、扭矩、间隙和载荷 |
(AEROSPACE SERIES. ROD ENDS, ADJUSTABLE, SELF-ALIGNING BALL BEARING WITH THREADED SHANK. DIMENSIONS, TORQUES, CLEARANCES AND LOADS. (EUROPEAN STANDARD EN 3541).) |
| NF L36-215-1996 |
航空和航天.带自动调心球轴承的吊环端头.交货技术条件 |
(AEROSPACE SERIES. ROD ENDS WITH SELF-ALIGNING BALL BEARINGS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2067).) |
| NF L36-220-1989 |
航空和航天系列.传动设备用缆绳.组装件和尺寸 |
(AEROSPACE SERIES. CONTROLE CABLE ASSEMBLIES. COMBINATIONS AND DIMENSIONS. (EUROPEAN STANDARD EN 2641).) |
| NF L36-221-1991 |
航空和航天系列.底座和软轴的拉紧螺杆.技术规范(欧洲标准 EN 2569) |
(Aerospace series. Control cable fittings and turnbarrels. Technical specification.) |
| NF L36-222-1991 |
航空和航天系列.带自润滑油封和螺纹安装杆的球形可调接头:螺纹直径1.5.尺寸和负荷.(欧洲标准EN 2790) |
(AEROSPACE SERIES. ROD ENDS,ADJUSTABLE,SELF-ALIGNING PLAIN BEARING WITH SELF-LUBRICATING LINER AND THREADED SHANK WITH ENGAGEMENT : 1,5 THREAD DIAMETER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2790).) |
| NF L36-223-1991 |
航空和航天系列.带自润滑油封和螺纹安装杆的单包边可调接头:螺纹直径1.5.尺寸和负荷.(欧洲标准EN 2791) |
(AEROSPACE SERIES. ROD ENDS,ADJUSTABLE,SINGLE FORK AND THREADED SHANK WITH ENGAGEMENT : 1,5 X THREAD DIAMETER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2791).) |
| NF L36-224-1991 |
航空和航天系列.带自润滑油封和螺纹安装杆的双包边可调接头.螺纹直径1.5.尺寸和负荷.(欧洲标准EN 2792) |
(AEROSPACE SERIES. ROD ENDS,ADJUSTABLE,DOUBLE FORK AND THREADED SHANK WITH ENGAGEMENT :1,5 X THREAD DIAMETER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2792).) |
| NF L36-225-1996 |
航空和航天.带关节轴承和自润滑涂层的吊环端头.交货技术条件 |
(AEROSPACE SERIES. ROD ENDS WITH SELF-LUBRICATING SELF-ALIGNING BEARINGS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2068).) |
| NF L36-310-1954 |
带软护套的操纵拉索 |
(FLEXIBLE SHEATHED TENSION CONTROL WIRES. (RECH.).) |
| NF L36-520-1966 |
带滚珠轴承的缆绳滑轮.(RECH.) |
(CABLE PULLEYS WITH BALL BEARINGS. (RECH.).) |
| NF L36-522-1975 |
操纵缆绳用带滚珠.轴承的非金属滑轮.尺寸和负荷 |
(Non-metallic pulleys with ball bearings for control cables. Dimensions and loads.) |
| NF L36-525-1978 |
操纵缆绳用带滚珠.轴承的非金属滑轮.技术规范 |
(NON-METALLIC PULLEYS WITH BALL BEARINGS FOR CONTROL CABLES. TECHNICAL SPECIFICATION.) |
| NF L36-711-1974 |
航天用滚子传动链和相应轮的啮合 |
(ROLLER CHAINS AND FITTED COG WHEELS GEARING - SELECTION FOR AEROSPACE USE.) |
| NF L40-050-1987 |
飞行器.聚四氯乙烯制的高温盘旋形软管 |
(AIRCRAFT. HIGH TEMPERATURE CONVOLUTED HOSE ASSEMBLIES IN POLYTETRAFLUOROETHYLENE (PTFE).) |
| NF L40-100-1966 |
飞行器的液体装置.管道接头基本尺寸 |
(INSTALLATION OF FLUIDS ABOARD AIRCRAFT. BASIC DIMENSIONS OF HOSE CONNECTIONS.) |
| NF L40-101-1974 |
轴向密封接头.ＩＳＯ米制阴螺纹剖面的凹端和BNAE公差 |
(CONNECTORS,AXIAL SEALING. INTERNAL THREAD BOSSES,ISO METRIC THREAD PROFILE AND B.N.A.E. TOLERANCES.) |
| NF L40-102-1966 |
飞机的液体装置.国际单位米制螺纹凸端的轴向密封接头 |
(AIRCRAFT FLUID INSTALLATIONS. CONNECTORS,AXIAL SEALING,MALE THREAD FITTINGS. SIM THREAD. (RECH.).) |
| NF L40-103-1974 |
轴向密封接头.ISO米制螺纹剖面的凸端和BNAE公差 |
(CONNECTORS,AXIAL SEALING. MALE THREAD FITTINGS,ISO METRIC THREAD PROFILE AND B.N.A.E. TOLERANCES.) |
| NF L40-104-1973 |
轴向密封接头.ISO米制螺纹剖面的凸端和ISO米制螺纹公差 |
(CONNECTORS,AXIAL SEALING. MALE THREAD FITTINGS,ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF L40-105-1973 |
轴向密封接头.ISO 米制阴螺纹剖面凸端和ISO米制螺纹公差 |
(CONNECTORS,AXIAL SEALING. INTERNAL THREAD BOSSES,ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF L40-112-1987 |
航空和航天.经向密封接头.阳螺纹剖面和ISO 米制螺纹公差.尺寸 |
(Aerospace fitting joint assembly, radial sealing. Male thread fittings. ISO metric thread profile and tolerances. Dimensions.) |
| NF L40-113-1987 |
航空和航天.经向密封接头.阴螺纹剖面和ISO 米制螺纹公差.尺寸 |
(Aerospace fitting joint assembly, radial sealing. Internal thread bosses. ISO metric thread profile and tolerances. Dimensions.) |
| NF L40-114-1987 |
航空和航天.径向密封接头.环形接头.尺寸 |
(Aerospace fitting joint assembly, radial sealing. O-rings. Dimensions.) |
| NF L40-120-1983 |
液压系统.米制接头的接触面 |
(FLUID SYSTEMS. INTERFACE OF METRIC COUPLINGS.) |
| NF L40-200-1967 |
飞机上液压管路的标记 |
(MARKING OF FLUID CIRCUITS IN AIRCRAFT.) |
| NF L40-201-1988 |
管道鉴定方法 |
(AEROSPACE. PIPELINES. IDENTIFICATION.) |
| NF L40-211-1989 |
飞行器.液压件.表说明经批准的件流量的标记 |
(AIRCRAFT. HYDRAULIC COMPONENETS. MARKING TO INDICATE FLUID FOR WHICH COMPONENTS IS APPROVED.) |
| NF L41-101-1982 |
固体微粒造成的液压管路的污染.概述 |
(CONTAMINATION OF HYDRAULIC SYSTEMS BY SOLID PARTICULATE MATTER. GENERAL.) |
| NF L41-102-1982 |
固体微粒造成的液压管路的污染.检验方法 |
(CONTAMINATION OF HYDRAULIC SYSTEMS BY SOLID PARTICULATE MATTER. INSPECTION METHODS.) |
| NF L41-136-1995 |
飞行器燃料系统的杂质.过滤器和过滤件.燃料系统中的特殊杂质的保水能力的比率 |
(Contamination of aircraft fuel systems. Filters and filter elements. Rating of retention capacity with specific contaminant in fuel systems.) |
| NF L41-210-1983 |
液体系统.软管、管道和接头的脉冲试验 |
(Fluid systems. Impulse testing of hose, tubing and fittings.) |
| NF L41-212-1983 |
液压系统.管子和接头的热冲击试验 |
(FLUID SYSTEMS. THERMAL SHOCK TESTING OF PIPING AND FITTINGS.) |
| NF L41-230-1985 |
飞行器.液压管路组装和接头.旋转弯曲试验 |
(AIRCRAFT. HYDRAULIC TUBING JOINTS AND FITTINGS. ROTARY FLEXURE TEST.) |
| NF L41-250-1987 |
航空航天设备用聚四氯乙烯管.密度和相对密度的测定方法 |
(Polytetrafluoroethylene (ptfe) tubing for aerospace applications. Methods for the determination of the density and relative density.) |
| NF L43-110-1966 |
飞行器的液体装置.软管用插入接头 |
(AIRCRAFT FLUID INSTALLATIONS. PLUG-IN UNIONS FOR FLEXIBLE HOSES.) |
| NF L43-210-1973 |
环形接头（RT）、一般互换条件、ISO 米制螺纹剖面和BNAE公差 |
(CYLINDRICAL UNION. GENERAL CONDITIONS OF INTERCHANGEABILITY,ISO METRIC THREAD PROFILE AND B.N.A.E. TOLERANCES.) |
| NF L43-211-1973 |
环形接头用阳螺纹部件 |
(MALE PARTS FOR CYLINDRICAL UNION.) |
| NF L43-212-1973 |
环形接头用连接螺母 |
(UNION NUTS FOR CYLINDRICAL UNION.) |
| NF L43-213-1973 |
环形接头的双外螺丝接头 |
(DOUBLE UNIONS FOR CYLINDRICAL UNION.) |
| NF L43-215-1973 |
环形接头（RT）.一般互换条件.ISO 米制螺纹剖面和公差 |
(CYLINDRICAL UNION. GENERAL CONDITIONS OF INTERCHANGEABILITY,ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF L43-310-1973 |
可旋转管接头（RO）.一般互换条件.ISO 米制螺纹剖面和BNAE公差 |
(SWIVEL CONNECTORS. GENERAL CONDITIONS OF INTERCHANGEABILITY,ISO METRIC THREAD PROFILE AND B.N.A.E. TOLERANCES.) |
| NF L43-311-1973 |
低压旋转接头的环形部分 |
(SWIVEL CONNECTORS FOR LOW PRESSURE APPLICATIONS,ANNULAR PART.) |
| NF L43-312-1973 |
低压旋转接头的空心螺栓 |
(SWIVEL CONNECTORS FOR LOW PRESSURE APPLICATIONS,BANJO BOLT.) |
| NF L43-315-1973 |
旋转接头（RO）.一般互换条件.ISO 米制螺纹剖面和公差 |
(SWIVEL CONNECTORS. GENERAL CONDITIONS OF INTERCHANGEABILITY,ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF L43-350-2002 |
航空航天系列.8°30’～ 28 000 kPa管联接件.动态梁密封端.米制系列.技术规范 |
(Aerospace series - Pipe coupling 8 o30’ up to 28 000 kPa - Dynamic beam seal - Metric series - Technical specification.) |
| NF L43-351-2002 |
航空航天系列.管联接器8°30’.螺纹端部.几何构型 |
(Aerospace series - Pipe coupling 8 o30’ - Thread end - Geometric configuration.) |
| NF L43-352-2002 |
航空航天系列.管联接器8°30’.弯管、T形管和十字管用动态梁密封端.几何构型 |
(Aerospace series - Pipe couplings 8 o30’ - Dynamic beam seal end for elbows, tees and crosses - Geometric configuration.) |
| NF L43-353-2002 |
航空航天系列.管联接器8°30’.金属包头焊接用动态梁密封端.几何构型 |
(Aerospace series - Pipe coupling 8 o30’ - Dynamic beam seal end for ferrule, welded - Geometric configuration.) |
| NF L43-354-2002 |
航空航天系列.管联接器8°30’.焊接的联接器端部.几何构型 |
(Aerospace series - Pipe coupling - Coupling ends, welded - Geometric configuration.) |
| NF L43-360-2002 |
航空航天系列.钛合金管联接器8°30’.带螺纹的管端弯接头 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Unions, welded, end, threaded.) |
| NF L43-361-2002 |
航空航天系列. 8°30’钛合金管连接件.带动态梁密封端的焊接卡套 |
(Aerospace series - Pipe couplings 8 o30’ in titanium alloy - Ferrules, welded, with dynamic beam seal end.) |
| NF L43-362-2002 |
航空航天系列. 8°30’钛合金管连接件.直接头 |
(Aerospace series - Pipe couplings 8 o30’ in titanium alloy - Unions, straight.) |
| NF L43-363-2002 |
航空航天系列. 8°30’钛合金管连接件.直减径接头 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Unions, straight, reducer.) |
| NF L43-364-2002 |
航空航天系列.8°30’钛合金管联接件.隔壁直角管接头 |
(Aerospace series - Pipe couplings 8 o30’ in titanium alloy - Unions, straight bulkhead.) |
| NF L43-365-2002 |
航空航天系列.8°30’钛合金管联接件.隔壁直角弯接头 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Unions, bulkhead, welded end.) |
| NF L43-366-2002 |
航空航天系列.钛合金管联接器8°30’.带密封环的异径管端接头 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Adaptors, reduced pipe end, with lockring.) |
| NF L43-370-2002 |
航空航天系列.8°30’钛合金管联接件.90°弯头 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Elbows 90 o.) |
| NF L43-371-2002 |
航空航天系列.8°30’钛合金管联接件.带推进线螺母的90°弯头 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Elbows 90 o with thrust wire nut.) |
| NF L43-372-2002 |
航空航天系列.8°30’钛合金管联接件.90°弯头焊接端 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Elbows 90 o welded end.) |
| NF L43-373-2002 |
航空航天系列.8°30’钛合金管联接件.带推进线螺母的90°弯头焊接端 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Elbows 90 o, welded end with thrust wire nut.) |
| NF L43-374-2002 |
航空航天系列.8°30’钛合金管联接件.隔离直通90°弯头 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Elbows 90 o, bulkhead.) |
| NF L43-375-2002 |
航空航天系列.8°30’钛合金管联接件.隔离直通90°弯头焊接端 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Elbows 90 o, bulkhead, welded end.) |
| NF L43-376-2002 |
航空航天系列. 8°30’钛合金管联接件.45°弯头 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Elbows 45 o.) |
| NF L43-377-2002 |
航空航天系列. 8°30’钛合金管联接件.带推进线螺母的45°焊接端 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Elbows 45 o welded end with thrust wire nut.) |
| NF L43-378-2002 |
航空航天系列. 8°30’钛合金管联接件.隔离直通45°弯头 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Elbows 45 o, bulkhead.) |
| NF L43-379-2002 |
航空航天系列.8°30’钛合金管联接件.三通管 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Tees.) |
| NF L43-380-2002 |
航空航天系列. 8°30’钛合金管联接件.带推进线螺母的三通 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Tees branch with thrust wire nut.) |
| NF L43-381-2002 |
航空航天系列.8°30’钛合金管联接件.端部带推进线螺母的三通 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Tees with thrust wire nut on run.) |
| NF L43-382-2002 |
航空航天系列.8°30’钛合金管联接件.隔直三通 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Tees bulkhead branch.) |
| NF L43-383-2002 |
航空航天系列.8°30’钛合金管联接件.端部隔直三通 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Tees bulkhead on run.) |
| NF L43-384-2002 |
航空航天系列.8°30’钛合金管联接件.推进线螺母 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Thrust wire nut.) |
| NF L43-385-2002 |
航空航天系列.8°30’钛合金管联接件.焊接卡套用螺母 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Nut for welded ferrule.) |
| NF L43-386-2002 |
航空航天系列.8°30’钛合金管联接件.隔壁直通螺母 |
(Aerospace series - Pipe coupling in titanium alloy - Bulkhead nuts.) |
| NF L43-387-2002 |
航空航天系列.8°30’钛合金管联接件.推进线 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Thrust wire.) |
| NF L43-388-2002 |
航空航天系列.8°30’钛合金管联接件.带动态粱密封端的端部焊接减径的卡套 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end.) |
| NF L43-389-2002 |
航空航天系列.8°30’钛合金管联接件.锁环配件 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Adaptors with lockring.) |
| NF L43-390-2002 |
航空航天系列.8°30’钛合金管联接件. 长型隔壁直通接头 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Unions, bulkhead, long.) |
| NF L43-391-2002 |
航空航天系列.8°30’钛合金管联接件. 长型隔壁直通接头焊接端 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Unions, bulkhead, long, welded end.) |
| NF L43-392-2002 |
航空航天系列.8°30’钛合金管联接件.减径三通 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Tees, reduced.) |
| NF L43-393-2002 |
航空航天系列.钛合金管联接器8°30’.弯管90度焊接端 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Elbows 90 o welded ends.) |
| NF L43-394-2002 |
航空航天系列.钛合金管联接器8°30’.弯管45度焊接端 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Elbows 45 o welded ends.) |
| NF L43-395-2002 |
航空航天系列.钛合金管联接器8°30’.长期使用的闷头T形管 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Tees bulkhead on run long.) |
| NF L43-396-2002 |
航空航天系列.钛合金管联接器8°30’.十字T形管接头 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Unions, cross.) |
| NF L43-397-2002 |
航空航天系列.钛合金管联接器8°30’.90度闷头长弯管 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Elbows 90 o bulkhead, long.) |
| NF L43-398-2002 |
航空航天系列.8°30’钛合金管联接件.长焊接端的90°弯头隔壁直通 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Elbows 90 o bulkhead, welded end long.) |
| NF L43-399-2002 |
航空航天系列.8°30’钛合金管联接件.长分支隔壁直通三通 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Tees, bulkhead branch long.) |
| NF L43-400-2002 |
航空航天系列.8°30’钛合金管联接件.端部带推进线螺母的减径三通 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Tees, reduced with thrust wire nut on run.) |
| NF L43-401-2002 |
航空航天系列.8°30’钛合金管联接件.Tees, reduced, bulkhead branch, long |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Tees, reduced, bulkhead branch, long.) |
| NF L43-402-2002 |
航空航天系列.8°30’钛合金管联接件.隔壁直通分支减径三通 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Tees, reduced, bulkhead branch.) |
| NF L43-403-2002 |
航空航天系列.8°30’钛合金管联接件.长端头部隔壁直通分支减径三通 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Tees, reduced, bulkhead on run, long.) |
| NF L43-404-2002 |
航空航天系列.8°30’钛合金管联接件.隔壁直通减径三通 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Tees, reduced, bulkhead.) |
| NF L43-406-2002 |
航空航天系列.钛合金管联接器8°30’.检修用带动态梁密封端的焊接金属包头 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Ferrules, welded with dynamic beam seal end, for repair.) |
| NF L43-407-2002 |
航空航天系列.钛合金管联接器8°30’.检修用焊接端部的闷头管接头 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Unions, bulkhead welded end, for repair.) |
| NF L43-408-2002 |
航空航天系列.钛合金管联接器8°30’.检修用长的焊接端部的闷头管接头 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Unions, bulkhead long welded end, for repair.) |
| NF L43-409-2002 |
航空航天系列.钛合金管联接器8°30’.检修用焊接端加螺纹的管接头 |
(Aerospace series - Pipe coupling 8 o30’ in titanium alloy - Unions, welded end threaded for repair.) |
| NF L43-550-1988 |
航空航天轮机设备.快卸低压接头.一般互换条件 |
(AEROSPACE. CABIN EQUIPMENTS. LOW PRESSURE QUICK DISCONNECT COUPLING. GENERAL CHARACTERISTICS.) |
| NF L43-581-1967 |
飞行器的液体装置.管端插入接头.(RECH.) |
(AIRCRAFT FLUID INSTALLATIONS. PLUG-IN UNIONS,TUBE END. (RECH.).) |
| NF L43-582-1966 |
飞行器液体装置.橡胶管接头.(RECH.) |
(AIRCRAFT FLUID INSTALLATIONS. CONNECTORS FOR RUBBER HOSE. (RECH.).) |
| NF L43-586-1972 |
螺钉固定光滑接头.ISO 螺纹剖面和公差 |
(PLUG-IN UNIONS,TUBE END. ISO THREAD PROFILE AND TOLERANCES.) |
| NF L43-587-1973 |
橡胶管接头.ISO 米制螺纹剖面和公差 |
(RUBBER HOSE CONNECTIONS. ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF L43-601-1974 |
带法兰的接头.连接法兰 |
(FLANGED CONNECTIONS - FLANGES FOR UNIONS.) |
| NF L43-602-1974 |
带法兰的接头.凹端 |
(FLANGED CONNECTIONS - INTERNAL BOSSES.) |
| NF L43-603-1974 |
带法兰的接头.环形接头 |
(FLANGED CONNECTIONS. O-RINGS.) |
| NF L43-611-1977 |
不锈钢制钎接带法兰的直接头 |
(FLANGED STRAIGHT UNIONS,SOLDER TYPE,STAINLESS STEEL.) |
| NF L43-613-2003 |
航空航天系列.耐热钢或耐热镍合金管连接件.焊接连接端.设计构型.英制 |
(Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel alloy - Coupling end, welded - Design configuration - Inch series.) |
| NF L43-614-2003 |
航空航天系列.管连接件37度.设计构型.英制.第1部分:凸形密封球端 |
(Aerospace series - Pipe coupling, 37 o - Design configuration - Inch series - Part 1 : male sealing ends, spherical.) |
| NF L43-615-2003 |
航空航天系列.管连接件37度.设计构型.英制.第2部分:管端 |
(Aerospace series - Pipe coupling, 37 o - Design configuration - Inch series - Part 2 : port ends.) |
| NF L43-616-2003 |
航空航天系列.管连接件37度.设计构型.英制.第3部分:管口连接件 |
(Aerospace series - Pipe coupling, 37 o - Design configuration - Inch series - Part 3 : port connections.) |
| NF L43-617-2003 |
航空航天系列.管连接件37度.设计构型.英制.第4部分:凹口密封端 |
(Aerospace series - Pipe coupling, 37 o - Design configuration - Inch series - Part 4 : female sealing ends.) |
| NF L43-618-2003 |
航空航天系列.耐热钢制37度管接头.转动螺套.英制 |
(Aerospace series - Pipe coupling 37 o, in heat resisting steel - Swivel nuts - Inch series.) |
| NF L43-619-2003 |
航空航天系列.耐热钢制37度管接头.焊接端直通接管头.英制 |
(Aerospace series - Pipe couplings, 37 o, spherical, in heat resisting steel - Straight nipples, welded end - Inch series.) |
| NF L43-620-2003 |
航空航天系列.60度钛合金管接头.油口接头 |
(Aerospace series - Pipe couplings, 60 o, in titanium alloy - Port connection.) |
| NF L43-621-2003 |
航空航天系列.60度钛合金TI-P64001球形管接头.直通转动螺套 |
(Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Swivel nuts, straight.) |
| NF L43-622-2003 |
航空航天系列.钛合金TI-P64001制球形、60度管联接器.焊接的螺纹直活管节 |
(Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded.) |
| NF L43-623-2003 |
航空航天系列.钛合金TI-P64001制球形、60度管联接器.螺纹直活管节 |
(Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Straight unions, threaded.) |
| NF L43-624-2003 |
航空航天系列.钛合金TI-P64001制球形、60度管联接器.焊接箍 |
(Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Ferrules, welded.) |
| NF L43-625-2003 |
航空航天系列.钛合金TI-P64001制球形、60度管联接器.管底座 |
(Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Caps.) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com