标准号 |
中文名称 |
英文名称 |
| BS 9210 N001-1-1975 |
(BNC型)射频连接器的详细规范.50Ω的密封、焊接、静态接触.全面评定级 |
(Detail specification for radio frequency connectors (type BNC) - Sealed, soldered, captive contact, 50 ohms - Full assessment level) |
| BS 9210 N007-1-1976 |
(SMB型)射频连接器的详细规范.不密封、焊接、静态接触、50Ω、插入式连接.全面评定级 |
(Detail specification for radio frequency connectors (type SMB) - Unsealed, soldered, captive contact, 50 ohms, snap-on couplings - Full assessment level) |
| BS 9210 N007-2-1976 |
(SMB型)射频连接器的详细规范.不密封、焊接、静态接触、50Ω、插入式连接.控制图.配合面详图和测量数据 |
(Detail specification for radio frequency connectors (type SMB) - Unsealed, soldered, captive contact, 50 ohms, snap-on couplings - Control drawings - Mating face details and gauge information) |
| BS 9210-1984 |
经质量评定的射频连接器规范:通用数据和试验方法 |
(Specification for radio frequency connectors of assessed quality: generic data and methods of test) |
| BS 9220 N001-1971 |
普通矩形(2:1)刚性波导管详细规范.标准壁厚度.一般应用范围 |
(Detail specification for ordinary rectangular (2:1) rigid waveguide tubing - Standard wall thickness - General application category) |
| BS 9220 N002-1971 |
中扁矩形(4:1)波导管详细规范.标准壁厚度.一般应用范围 |
(Detail specification for medium flat rectangular (4:1) rigid waveguide tubing - Standard wall thickness - General application category) |
| BS 9220 N003-1971 |
扁矩形(8.33:1)波导管详细规范.标准壁厚度.一般应用范围 |
(Detail specification for flat rectangular (8.33:1) rigid waveguide tubing - Standard wall thickness - General application category) |
| BS 9220 N004-1971 |
圆形波导管详细规范.标准壁厚度.一般应用范围 |
(Detail specification for circular rigid waveguide tubing - Standard wall thickness - General application category) |
| BS 9220-1971 |
经质量评定的刚性波导管规范.和通用数据和试验方法 |
(Specification for rigid waveguide tubing of assessed quality: generic data and methods of test) |
| BS 923-1-1990 |
高压试验技术导则.第1部分:总则 |
(Guide on high-voltage testing techniques - General) |
| BS 93-1951 |
尺寸为OB.A.至16B.A.的英国协会(B.A.)螺纹与公差规范 |
(Specification for British Association (B.A.) screw threads with tolerances for sizes 0 B.A. to 16 B.A.) |
| BS 9300 C199-276-1971 |
硅稳压二极管详细规范 |
(Detail specification for silicon voltage-regulator diodes) |
| BS 9300 C377-378-1971 |
硅同轴混合二极管详细规范 |
(Detail specifications for silicon coaxial mixer diodes) |
| BS 9300 C379-388-1971 |
硅螺杆式大功率整流二极管详细规范 |
(Detail specifications for silicon stud mounted, power rectifier diodes) |
| BS 9300 C405-429-1971 |
硅稳压管详细规范 |
(Detail specifications for silicon voltage-regulator diodes) |
| BS 9300 C476-1973 |
硅雪崩整流二极管详细规范 |
(Detail specification for silicon avalanche rectifier diode) |
| BS 9300 C534-1971 |
硅同轴电阻开关二极管详细规范 |
(Detail specification for silicon coaxial resistive switching diode) |
| BS 9300 C582-584-1971 |
反向闭锁可控硅三极管详细规范 |
(Detail specifications for reverse blocking triode thyristors) |
| BS 9300 C599-1971 |
棒状硅微波开关二极管详细规范 |
(Detail specification for silicon microwave switching diode, rod mounted) |
| BS 9300 C667-668-1971 |
硅雪崩整流二极管详细规范 |
(Detail specification for silicon avalanche rectifier diodes) |
| BS 9300 C678-721-1971 |
硅稳压二极管详细规范 |
(Detail specification for silicon voltage regulator diodes) |
| BS 9300 C762-1971 |
X频带用混频二极管详细规范 |
(Detail specification for mixer diodes for use at X-band frequencies) |
| BS 9300 C771-772-1971 |
同轴混频二极管详细规范 |
(Detail specification for coaxial mixer diodes) |
| BS 9300 C776-777-1971 |
锗同轴混频二极管详细规范 |
(Detail specification for germanium coaxial mixer diodes) |
| BS 9300 C778-1971 |
锗同轴混频二极管配对用详细规范 |
(Detail specification for a matched pair of germanium coaxial mixer diodes) |
| BS 9300 C780-831-1971 |
硅稳压二极管详细规范 |
(Detail specification for silicon voltage regulator diodes) |
| BS 9300 C841-849-1971 |
硅稳压二极管详细规范 |
(Detail specification for silicon voltage regulator diodes) |
| BS 9301 N002-1971 |
通用硅信号二极管详细规范.150mA、150V、密封、玻璃封装.一般应用范围Q |
(Detail specification for general purpose silicon signal diodes - 150 mA, 150 V, hermetically sealed, glass encapsulation - General application category Q) |
| BS 9305 N001-1972 |
硅稳压二极管详细规范.1.5W、3.3-33V(5%)、密封.一般应用范围Q |
(Detail specification for silicon voltage regulator diodes - 1.5 W, 3.3 to 33 V (5%), hermetically sealed - General application category Q) |
| BS 9305 N041-1972 |
硅稳压二极管详细规范.400mW、2.7-33V(5％)、密封、玻璃封装.一般应用范围 |
(Detail specification for silicon voltage regulator diodes - 400 mW, 2.7 to 33 V (5%), hermetically sealed, glass encapsulation - General application category Q) |
| BS 9305 N042-1972 |
硅稳压二极管详细规范.1.5,6.8-200V(5%)、密封.一般应用范围Q |
(Detail specification for silicon voltage regulator diodes - 1.5 W, 6.8 to 200 V (5%), hermetically sealed - General application category C) |
| BS 9305 N044-1974 |
硅稳压二极管详细规范.1.0W，3.3-33V(5％)、密封.全面评定级 |
(Detail specification for silicon voltage regulator diodes - 1.0 W, 3.3 to 33 V (5%), hermetically sealed - Full assessment level) |
| BS 9364 N007 and N009-1978 |
小功率硅N-P-N型开关晶体管详细规范.20V、平面外延、无壳、密封封装.全面附加评定级 |
(Detail specification for low power silicon n-p-n switching transistors - 20 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level) |
| BS 9364 N008 and N010-1978 |
小功率硅N-P-N型开关晶体管详细规范.20V、平面外延、额定环境条件、密封封装(长引线型).全面附加评定级 |
(Detail specification for low power silicon n-p-n switching transistors - 20 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version) - Full plus additional assessment level) |
| BS 9364 N011-1978 |
小功率硅P-N-P型开关晶体管详细规范.65V、平面外延、无壳、密封封装、全面附加评定级 |
(Detail specification for low power silicon p-n-p switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level) |
| BS 9364 N012-1978 |
小功率硅P-N-P型开关晶体管详细规范.65V、平面外延、规定环境条件、密封封装(长引线型).全面和附加评定级 |
(Detail specification for low power silicon p-n-p switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version) - Full plus additional assessment level) |
| BS 9364 N013-1979 |
小功率硅P-N-P型开关晶体管详细规范.25V、平面外延、无壳、密封封装、全面附加评定级 |
(Detail specification for low power silicon p-n-p switching transistors - 25 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level) |
| BS 9364 N016-1979 |
小功率硅P-N-P型开关晶体管详细规范.65V、平面外延、无壳、密封封装.全面附加评定级 |
(Detail specification for low power silicon n-p-n switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level) |
| BS 9364 N017-1979 |
小功率硅n-p-n型开关晶体管详细规范.65V、平面外延、额定环境条件、密封封装(长引线型).全面附加评定级 |
(Detail specification for low power silicon n-p-n switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version) - Full plus additional assessment level) |
| BS 939-1977 |
工程角尺(包括圆柱直角规和矩形角尺)规范 |
(Specification for engineers’ squares (including cylindrical and block squares)) |
| BS 9430-1978 |
经质量评定的集成电路详细规范的制订规则.调压器.全面评定级 |
(Rules for the preparation of detail specifications for integrated circuits of assessed quality: voltage regulators - Full assessment level) |
| BS 9450-1998 |
经质量评定的(能力鉴定程序)集成电路与微型组件规范.通用数据和试验方法 |
(Specification for integrated electronic circuits and micro-assemblies of assessed quality (capability approval procedures) - Generic data and methods of test) |
| BS 946-1970 |
纱线命名方法 |
(Method for the designation of yarns) |
| BS 947-1970 |
表示纺织品线密度的通用方式(特数制)规范 |
(Specification for a universal system for designating linear density of textiles (Tex system)) |
| BS 949-1-1992 |
丝锥.第1部分:一般尺寸规范 |
(Screwing taps - Specification of general dimensions) |
| BS 949-2-1992 |
丝锥.统一标准细螺纹丝锥规范:制造公差 |
(Screwing taps - Specification for Unified ground thread taps: manufacturing tolerances) |
| BS 949-3-1993 |
丝锥.管螺纹丝锥规范 |
(Screwing taps - Specification for pipe thread taps) |
| BS 949-4-1990 |
丝锥.第4部分:米制磨牙丝锥规范:制造公差 |
(Screwing taps - Specification for metric ground thread taps: manufacturing tolerances) |
| BS 949-5-1990 |
丝锥.第5部分:命名和术语 |
(Screwing taps - Nomenclature and terminology) |
| BS 9490-1975 |
经质量评定的数字集成电路详细规范的制定规则.全面评定级 |
(Rules for the preparation of detail specifications for digital integrated circuits of assessed quality - Full assessment level) |
| BS 9493-1981 |
经质量评定的有混频数字和/或模拟功能的集成电路详细规范的制订规则 |
(Rules for the preparation of detail specifications for integrated circuits of assessed quality which perform mixed digital and/or analogue functions) |
| BS 950-1-1967 |
颜色评定用人造日光规范.第1部分:颜色匹配与颜色鉴定用照明器 |
(Specification for artificial daylight for the assessment of colour - Illuminant for colour matching and colour appraisal) |
| BS 950-2-1967 |
颜色评定用人造日光规范.第2部分:书画业的观察条件 |
(Specification for artificial daylight for the assessment of colour - Viewing conditions for the graphic arts industry) |
| BS 951-1999 |
接地.接地和搭接用夹具规范 |
(Electrical earthing - Clamps for earthing and bonding - Specification) |
| BS 952-1-1995 |
装配用玻璃.分类 |
(Glass for glazing - Classification) |
| BS 952-2-1980 |
装配用玻璃.第2部分:玻璃作业用用名词术语 |
(Glass for glazing - Terminology for work on glass) |
| BS 9520-1983 |
经质量评定的直流和低频用电连接器:一般数据、试验方法和性能鉴定程序 |
(Specification for electrical connectors of assessed quality for d.c. and low frequency application: generic data, methods of test and capability approval procedures) |
| BS 9521-1983 |
经质量评定的如同BS9520所规定的电连接器可移动接触器规范.一般数据、试验方法和详细规范的制定规则 |
(Specification for removable contacts of assessed quality for electrical connectors as defined by BS 9520: generic data, methods of test and rules for the preparation of detail specifications) |
| BS 9522 N0001-1982 |
直流和低压用多触头圆形电连接器详细规范、带有前面可脱扣后面可拆卸的交合触点的卡口接头.全面评定级 |
(Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications - Bayonet coupling with front release, rear removable crimp contacts - Full assessment lev) |
| BS 9522 N0003-1990 |
直流和低频用多触头圆形电连接器详细规范. 带后面可插入、后面松脱、后面可卸压接触点的无档板密封、耐环境 |
() |
| BS 9522-1990 |
经质量评定的直流和低频用圆形连接器详细规范的制定规则.全面和基本评定级 |
(Rules for the preparation of detail specifications for circular electrical connectors of assessed quality for d.c. and low frequency applications - Full, basic and full plus airframe assessment levels) |
| BS 9523-1984 |
直流和低频用经质量评定的整体金属壳矩形电连接器详细规范的制定规则.全面和基本评定级 |
(Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with integral metal housings for d.c. and low frequency applications - Full and basic asses) |
| BS 9524-1984 |
直流和低频用经质量评定的模压体矩形电连接器详细规范的制定规则.全面和基本评定级 |
(Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with moulded bodies for d.c. and low frequency applications - Full and basic assessment lev) |
| BS 9525 N0001-1982 |
多触点两件式印制电路板连接器的详细规范 |
(Detail specification for multi-contact two-part printed board electrical connectors) |
| BS 9525-1984 |
直流和低频用经质量评定的两件式印制电路板插接器和转接装置详细规范的制订规则.全面和基本评定级 |
(Rules for the preparation of detail specifications for two-part printed board electrical connectors and board-mounted transition devices of assessed quality for d.c. and l.f. applications: full and ba) |
| BS 9526 N0001-1978 |
闭端单边或双边多触针边缘插座插接器(触针可替换、整个电路板敷有焊料或引线绕曲终端)详细规范.全面评定级 |
(Detail specification for multi-contact edge socket electrical connectors - Single or double sided, closed ended, replaceable contacts, through-board solder or wire wrap terminations - Full assessment) |
| BS 9526 N0002-1979 |
多触点边缘插座插接器详细规范.单边或多边、开口、金属固定法兰、 导键定位、换位触点、穿板焊接或引线绕曲 |
(Detail specification for multi-contact edge socket electrical connectors - Single or double sided, open ended, metal fixing flanges, guide key location, replaceable contacts, through-board solder or w) |
| BS 9526 N0003-1979 |
多触点边缘插座插接器详细规范.单边或多边、开口、导键定位、换位触点、穿板焊接或引线绕曲接线柱.全面评定 |
(Detail specification for multi-contact edge socket electrical connectors - Single or double sided, open ended, guide key location, replaceable contacts, through-board solder or wire wrap terminations) |
| BS 9561-1979 |
经质量评定的操纵开关.一般数据和试验方法.详细规范制定的一般规则 |
(Specification for lever operated switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications) |
| BS 9563-1979 |
经质量评定的旋转(手动)开关:一般数据和试验方法:详细规范制定的一般规则 |
(Specification for rotary (manual) switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications) |
| BS 9564-1980 |
经质量评定的按钮开关规范.一般数据和试验方法.详细规范制定的一般规则 |
(Specification for push-button switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications) |
| BS 9566-1984 |
印制电路板程序开关详细规范的制定规则 |
(Rules for the preparation of detail specifications for printed board programming switches) |
| BS 957-1-1941 |
测隙规规范.第1部分:英制单位 |
(Specification for feeler gauges - Inch units) |
| BS 957-2-1969 |
测隙规规范.第2部分:米制单位 |
(Specification for feeler gauges - Metric units) |
| BS 958-1968 |
精密工程用酒精水准仪规范 |
(Specification for spirit levels for use in precision engineering) |
| BS 959-1951 |
内径千分尺(包括杠杆式千分尺)规范 |
(Specification for internal micrometers (including stick micrometers)) |
| BS 9612 N004-1977 |
经质量评定的振荡器用冷焊封石英晶体振子详细规范.DN,47 U/2,DQ和DP外壳,0.8至20MHz和3.0到30MHz频率范围. |
() |
| BS 9612 N005-1977 |
经质量评定的振荡器用冷焊封石英晶体振子详细规范.DN、DQ和DP外壳、0.8至20MHz和3.0到30MHz频率范围.基波厚 |
() |
| BS 9612 N006-1977 |
经质量评定的振荡器用冷焊封石英晶体振子详细规范.DN、47U/2、DQ和DP外壳,17至75MHz频率范围.三次谐波厚度 |
() |
| BS 9612 N007-1977 |
经质量评定的振荡器用冷焊封石英晶体振子详细规范.DN、DQ和DP外壳,17至75MHz频率范围.三次谐波厚度切变振荡 |
() |
| BS 9612 N008-1977 |
经质量评定的振荡器用冷焊封石英晶体振子详细规范.DN、DQ和DP外壳,50至125MHz频率规范.五次谐波厚度切变振 |
() |
| BS 9612 N009-1977 |
经质量评定的振荡器用冷焊封石英晶体振子详细规范.DN、DQ和DP外壳,50至125MHz频率规范.五次谐波厚度切变振 |
() |
| BS 9612 N010-1979 |
经质量评定的振荡器用冷焊封石英晶体振子详细规范.DN、DQ和DP外壳,50至125MHz频率范围.基波厚度切变振荡、 |
() |
| BS 9612 N016-1979 |
经质量评定的振荡器用冷焊封石英晶体振子详细规范.DN、D2、DQ和DP外壳,0.8至20MHz和3.0到30MHz频率范围.基 |
() |
| BS 9612 N017-1979 |
经质量评定的振荡器用冷焊封石英晶体振子详细规范.DN、D2、DQ和DP外壳,0.8至20MHz和3.0到30MHz频率范围.基 |
() |
| BS 9612 N018-1979 |
振荡器用电阻焊密封石英晶体振子详细规范.DN、D2、DQ和DP外壳、17至75MHz频率范围.三次谐波厚度切变振荡模 |
() |
| BS 9612 N019-1979 |
经质量评定的振荡器用冷焊封石英晶体振子详细规范.DN、D2、DQ和DP外壳,17至75MHz频率范围.三次谐波厚度切变 |
() |
| BS 9612 N020-1979 |
经质量评定的振荡器用冷焊封石英晶体振子详细规范.DN、D2、DQ和DP外壳,17至75MHz频率范围.五次谐波厚度切变 |
() |
| BS 9612 N021-1979 |
经质量评定的振荡器用冷焊封石英晶体振子详细规范.DN、D2、DQ和DP外壳,50至125MHz频率范围.五次谐波厚度切 |
() |
| BS 9617-1982 |
经质量评定的石英晶体振子空白详细规范的制定规则.全面评定级 |
(Rules for the preparation of detail specifications for quartz crystal units of assessed quality - Full assessment level) |
| BS 9625-1983 |
经质量评定的石英晶体振子空白详细规范.全面评定级 |
(Blank detail specification for quartz crystal oscillators of assessed quality: full assessment level) |
| BS 969-1982 |
普通极限量规的极限和公差规范 |
(Specification for limits and tolerances on plain limit gauges) |
| BS 9720-1989 |
经质量评定的定制变压器和电感器:通用数据和试验方法 |
(Specification for custom-built transformers and inductors of assessed quality: generic data and methods of test) |
| BS 9721-1985 |
经质量评定的电子设备用信号变压器分规范 |
(Sectional specification for signal transformers of assessed quality for use in electronic equipment for capability approval) |
| BS 9727-1985 |
经质量评定的电子设备用电源变压器分规范:基本评定级 |
(Sectional specification for power transformers of assessed quality for use in electronic equipment for capability approval) |
| BS 9733-1985 |
经质量评定的电子设备用脉冲变压器分规范 |
(Sectional specification for pulse transformers of assessed quality for use in electronic equipment for capability approval) |
| BS 9741-1986 |
经质量评定的电子设备用电感器分规范 |
(Sectional specification for inductors of assessed quality for use in electronic equipment for capability approval) |
| BS 975-1987 |
硝酸水溶液的密度.成分表 |
(Schedule for density-composition tables for aqueous solutions of nitric acid) |
| BS 9751 N0001-1980 |
固定绝缘(无屏蔽)射频电感器详细规范.线绕、铁粉或酚醛圆柱形.全面评定级 |
(Detail specification for fixed insulated (unshielded) radio frequency inductors - Wire wound on ferrite, iron dust or phenolic cylindrical former - Full assessment level) |
| BS 9751-1979 |
固定绝缘(无屏蔽)射频电感器空白详细规范.全面评定级 |
(Blank detail specification for fixed insulated (unshielded) r.f. inductors at the full assessment level) |
| BS 9753-1986 |
经质量评定的电子设备用可变射频型电感器分规范 |
(Sectional specification for variable r.f. type inductors of assessed quality for use in electronic equipment for capability approval) |
| BS 976-1987 |
盐酸水溶液的密度.成分表 |
(Schedule for density-composition tables for aqueous solutions of hydrochloric acid) |
| BS 9760-1978 |
评估质量的印制电路规范.一般数据和试验方法.性能认可程序与规则 |
(Specification for printed circuits of assessed quality: generic data and methods of test: capability approval procedure and rules) |
| BS 9761-1988 |
经质量评定的带穿透镀膜孔的多层刚性印制电路板制造商性能鉴定用分规范 |
(Sectional specification for capability approval of manufacturers of multilayer rigid printed wiring boards of assessed quality with plated through holes) |
| BS 9762-1988 |
级质量评定的带穿透镀膜孔的双面硬性印刷电路板制造商性能鉴定用分规范 |
(Sectional specification for capability approval of manufacture of double-sided rigid printed wiring boards of assessed quality with plated through holes) |
| BS 9763-1988 |
经质量评定的无穿透镀膜孔的单面和双面印制电路板制造商性能鉴定用的分规范 |
(Sectional specification for capability approval of manufacturers of single- or double-sided printed wiring boards of assessed quality without plated through holes) |
| BS 9764-1988 |
经质量评定的无穿透镀膜孔连接的有或无硬化成份材料的单面或双面挠性印制电路板制造商性能鉴定用的分规范 |
(Sectional specification for capability approval of manufacturers of single- or double-sided flexible printed wiring boards of assessed quality without through hole connections and with or without rigi) |
| BS 9765-1988 |
经质量评定的带穿透镀膜孔连接的有或无硬化成分材料的双面挠性印制电路板制造商性能鉴定用的分规范 |
(Sectional specification for capability approval of manufacturers of double-sided flexible printed wiring boards of assessed quality with through hole connections and with or without rigidizing compone) |
| BS 978-1-1968 |
小齿距齿轮.第1部分:渐开线直齿和斜齿齿轮 |
(Specification for fine pitch gears - Involute spur and helical gears) |
| BS 978-2 Addendum No. 1-1959 |
仪器和类似时钟机构装置用齿轮.摆线齿轮.双环弧型齿轮 |
(Gears for instruments and clockwork mechanisms - Cycloidal type gears - Double circular arc type gears) |
| BS 978-2-1952 |
小齿距齿轮.第2部分:摆线齿轮 |
(Specification for fine pitch gears - Cycloidal type gears) |
| BS 978-3-1952 |
小齿距齿轮.第3部分:伞齿轮 |
(Specification for fine pitch gears - Bevel gears) |
| BS 984-1990 |
编织与地毯用纱零售包装净重的测定方法 |
(Method for determination of net mass of retail packages of knitting and rug yarns) |
| BS 9925 Pt.02.01 and Pt.02.02- |
电子器件质量评定的综合协调体系.通信用电感器和变压器铁心.第2部分:空白详细规范:宽带变压器的磁性氧化 |
(Harmonized system of quality assessment for electronic components - Inductor and transformer cores for telecommunications - Blank detail specification: magnetic oxide cores for broad-band transformers) |
| BS 9925-0-1984 |
电子器件用经质量评定的综合协调体系.通信用变压器和电感器导体.第0部分:总规范 |
(Harmonized system of quality assessment for electronic components - Inductor and transformer cores for telecommunications - Generic specification) |
| BS 9925-01.0-1984 |
电子器件用经质量评定的综合协调体系.通信用变压器和电感器铁心.第1部分:分规范:电感器用铁氧体磁心 |
(Harmonized system of quality assessment for electronic components - Inductor and transformer cores for telecommunications - Sectional specification: magnetic oxide cores for inductor applications) |
| BS 9925-01.01-1984 |
电子器质量评定的综合协调体系.通信用变压器和电感器铁心.第1部分:空白详细规范:电感器用铁氧体磁心.第1 |
(Harmonized system of quality assessment for electronic components - Inductor and transformer cores for telecommunications - Blank detail specification: magnetic oxide cores for inductor applications -) |
| BS 9925-02.0-1987 |
电子器件用经质量评定的综合协调体系.通信用变压器和电感器铁心.第2部分:分规范:宽带变压器用铁氧体磁心 |
(Harmonized system of quality assessment for electronic components - Inductor and transformer cores for telecommunications - Sectional specification: magnetic oxide cores for broad-band transformers) |
| BS 9925-03.0-1988 |
电子器件用经质量评定的综合协调体系.通信用变压器和电感器铁心.第3部分:分规范:电力用变压器和扼流圈的 |
(Harmonized system of quality assessment for electronic components - Inductor and transformer cores for telecommunications - Sectional specification: Magnetic oxide cores for transformers and chokes fo) |
| BS 9925-03.01-1988 |
电子器件质量评定的综合协调体系.通信用变压器和电感器磁心.第3部分:空白详细规范:电力变压器和扼流圈用 |
(Harmonized system of quality assessment for electronic components - Inductor and transformer cores for telecommunications - Blank detail specification: magnetic oxide cores for transformers and chokes) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com