标准号 |
中文名称 |
英文名称 |
| BS ISO 5433-1999 |
皮革.湿铬鞣革牛皮.规范 |
(Leather - Bovine wet blue - Specification) |
| BS ISO 5456-4-2001 |
技术制图.投影法.中心投影 |
(Technical drawings - Projection methods - Central projection) |
| BS ISO 5459-2000 |
技术图纸.几何公差.几何图形公差的基准和基准系统 |
(Technical drawings - Geometrical tolerancing - Datums and datum-systems for geometrical tolerances) |
| BS ISO 5466-1997 |
摄影.已处理的安全摄影胶片.存放技术 |
(Photography - Processed safety photographic films - Storage practices) |
| BS ISO 5473-1997 |
橡胶或塑料涂覆织物.耐挤压性测定 |
(Rubber or plastics-coated fabrics - Determination of crush resistance) |
| BS ISO 5483-2004 |
船舶和海上技术.油箱和水箱的排水设施 |
|
| BS ISO 5507-2002 |
油料种子、植物油和脂肪.命名 |
(Oilseeds, vegetable oils and fats - Nomenclature) |
| BS ISO 5530-4-2002 |
小麦面粉.生面团物理特性.使用气泡仪测定流变性能 |
(Wheat flour (Triticum aestivum L.) - Physical characteristics of doughs - Determination of rheological properties using an alveograph) |
| BS ISO 5536-2003 |
乳脂品.水含量的测定.卡尔.费休法 |
Milk fat products - Determination of water content - Karl Fischer method |
| BS ISO 5538-2004 |
乳和乳制品.取样.计数检验 |
|
| BS ISO 5548-2004 |
酪蛋白和酪蛋白酸盐.乳糖含量的测定.光度法 |
|
| BS ISO 5593-1998 |
滚动轴承.词汇 |
(Rolling bearings - Vocabulary) |
| BS ISO 5596-2000 |
液压传动.隔离式储气蓄能器.压力、容积的范围和特性量 |
(Hydraulic fluid power - Gas-loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities) |
| BS ISO 5599-1-2001 |
气压液动.五通方向控制阀.不带电连接器的安装接口表面 |
(Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces without electrical connector) |
| BS ISO 5599-2-2001 |
气压液动.五通方向控制阀.任选电气连接器的安装接口面 |
Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces with optional electrical connector |
| BS ISO 5626-1994 |
纸.耐折弯性测定 |
Paper - Determination of folding endurance |
| BS ISO 5631-2001 |
纸和板.颜色的测定(C/2°).漫反射法 |
Paper and board - Determination of colour (C/2 ? - Diffuse reflectance method |
| BS ISO 5636-4-2005 |
纸和纸板.透气性的测定(中等范围).谢菲尔德方法 |
|
| BS ISO 5652-1990 |
信息技术.信息交换用9磁道、12.7mm(0.5in)宽磁带.使用246字符/mm(6250字符/in)编码字符集的格式和录制 |
Information processing - 9-track, 12,7 mm (0.5 in) wide magnetic tape for information interchange - Format and recording, using group coding at 246 cpmm (6250 cpi) |
| BS ISO 5655-2001 |
摄影技术.工业X射线照相胶片和金属增感屏.尺寸 |
Photography - Industrial radiographic films (roll and sheet) and metal intensifying screens - Dimensions |
| BS ISO 5658-2-1997 |
燃烧试验.火焰传播.第2部分:直立布局中建筑产品侧面的火焰蔓延程度 |
Reaction to fire tests - Spread of flame - Lateral spread on building products in vertical configuration |
| BS ISO 5658-4-2001 |
燃烧试验反应.火焰传播.垂直定向样品火焰垂直传播的中型试验 |
(Reaction to fire tests - Spread of flame - Intermediate-scale test of vertical spread of flame with vertically oriented specimen) |
| BS ISO 5667-17-2000 |
水质.取样.悬浮沉淀物的取样指南 |
Water quality - Sampling - Guidance on sampling of suspended sediments |
| BS ISO 5667-18-2001 |
水质.取样.污染地区地下水取样指南 |
Water quality - Sampling - Guidance on sampling of groundwater at contaminated sites |
| BS ISO 5681-2002 |
农作物保护设备.词汇 |
Equipment for crop protection - Vocabulary |
| BS ISO 5687-2003 |
收割设备.联合收割机.谷物箱容量和卸料装置性能的测定和标注 |
Equipment for harvesting - Combine harvesters - Determination and designation of grain tank capacity and unloading device performance |
| BS ISO 5692-1-2004 |
农用车辆.拖挂车辆的机械连接装置.挂接环的尺寸 |
|
| BS ISO 5707-1997 |
挤奶装置.结构和性能 |
Milking machine installations - Construction and performance |
| BS ISO 5718-2002 |
收割机.农用旋转式割草机刀片.要求 |
Harvesting equipment - Blades for agricultural rotary mowers - Requirements |
| BS ISO 5725-1-1995 |
测量方法和结果的精确性(精度和精确度).一般原则和定义 |
Accuracy (trueness and precision) of measurement methods and results - General principles and definitions |
| BS ISO 5725-2-1995 |
测量方法和结果的精确性(精度和精密度).标准测量方法的重复性和再现性测定的基本方法 |
Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of repeatability and reproducibility of a standard measurement method |
| BS ISO 5725-3-1995 |
测量方法和测量结果的精确性(精度和精密度).第3部分;标准测量方法的精密度的间歇性测量 |
Accuracy (trueness and precision) of measurement methods and results - Intermediate measures of the precision of a standard measurement method |
| BS ISO 5725-4-1995 |
测量方法和测量结果的精确性(精度和精密度).第4部分;标准测量方法的真实测定的基本方法 |
Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of the trueness of a standard measurement method |
| BS ISO 5725-5-1998 |
测量方法和结果的准确度.标准测量方法精度测定的迭代法 |
Accuracy (trueness and precision) of measurement methods and results - Alternative methods for the determination of the precision of a standard measurement method |
| BS ISO 5725-6-1995 |
测量方法和测量结果的精确性(精度和精密度).第6部分;准确值的实际应用 |
Accuracy (trueness and precision) of measurement methods and results - Use in practice of accuracy values |
| BS ISO 5738-2004 |
乳和乳制品.铜含量的测定.光度参照法 |
|
| BS ISO 5739-2003 |
酪蛋白和酪蛋白酸盐.焦粒和外部物质含量的测定 |
Caseins and caseinates - Determination of contents of scorched particles and of extraneous matter |
| BS ISO 5742-2004 |
夹扭钳和剪切钳.术语 |
|
| BS ISO 5743-2004 |
夹扭钳和剪切钳.通用技术条件 |
|
| BS ISO 5744-2004 |
夹扭钳和剪切钳.试验方法 |
|
| BS ISO 5745-2004 |
夹扭钳和剪切钳.夹扭钳.尺寸和试验值 |
|
| BS ISO 5746-2004 |
夹扭钳和剪切钳.钳工钳和电工钳.尺寸和试验值 |
|
| BS ISO 5748-2004 |
夹扭钳和剪切钳.顶切钳.尺寸和试验值 |
|
| BS ISO 5749-2004 |
夹扭钳和剪切钳.斜嘴钳.尺寸和试验值 |
|
| BS ISO 5751-1-2004 |
摩托车轮胎和轮辋(米制系列).设计指南 |
|
| BS ISO 5751-1-2004 |
摩托车轮胎和轮辋(米制系列).设计指南 |
|
| BS ISO 5751-3-2004 |
摩托车轮胎和轮辋(米制系列).配套轮辋轮廓范围 |
|
| BS ISO 5751-3-2004 |
摩托车轮胎和轮辋(米制系列).配套轮辋轮廓范围 |
|
| BS ISO 5758-2003 |
电影.供交换用影片及磁性(声迹)素材.容器标签的最低限内容 |
(Cinematography - Labelling of containers for motion-picture film and magnetic material - Minimum information for exchange of materials) |
| BS ISO 5765-1-2002 |
奶粉、干冰混合物和加工的奶酪.测定乳糖含量.利用乳糖中葡萄糖含量的酶催化方法 |
Dried milk, dried ice-mixes and processed cheese - Determination of lactose content - Enzymatic method utilizing the glucose moiety of the lactose |
| BS ISO 5765-2-2002 |
奶粉、干冰混合物和加工的奶酪.测定乳糖含量.利用乳糖中半乳糖含量的酶催化方法 |
Dried milk, dried ice-mixes and processed cheese - Determination of lactose content - Enzymatic method utilizing the galactose moiety of the lactose |
| BS ISO 5768-1999 |
电影技术.16mm电影胶片在W 型电影摄影机片窗上形成的影象.位置和尺寸 |
Cinematography - Image produced by camera aperture type W on 16 mm motion-picture film - Position and dimensions |
| BS ISO 5781-2000 |
液压传动.减压阀、顺序阀、卸荷阀、节流阀和止回阀.安装面 |
Hydraulic fluid power - Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces |
| BS ISO 5782-1-1998 |
气压传动.空气压缩过滤器.供货商文件应包括的主要特性和产品标志要求 |
Pnuematic fluid power - Compressed air filters - Main characteristics to be included in supplier`s literature and product-marking requirements |
| BS ISO 5782-2-1998 |
气压传动.空气压缩过滤器.测定包括在供货商文件中的主要特性的试验方法 |
Pnuematic fluid power - Compressed air filters - Test methods to determine the main characteristics to be included in supplier`s literature |
| BS ISO 5796-2000 |
橡胶配方配合剂.天然碳酸钙.试验方法 |
Rubber compounding ingredients - Natural calcium carbonate - Test methods |
| BS ISO 5797-2004 |
造船和海上技术.耐火结构的窗和侧舷窗 |
|
| BS ISO 5797-2004 |
造船和海上技术.耐火结构的窗和侧舷窗 |
|
| BS ISO 5799-1995 |
摄影技术.医用和牙科用直接爆光射线摄影胶片/处理系统.ISO感光速度和ISO平均梯度的测定 |
Photography - Direct-exposing medical and dental radiographic film/process systems - Determination of ISO speed and ISO average gradient |
| BS ISO 5800-1995 |
摄影技术.静物照相用彩色负片.ISO感光度的测定 |
Photography - Colour negative films for still photography - Determination of ISO speed |
| BS ISO 5805-1998 |
机械振动和冲击.人体暴露.词汇 |
Mechanical vibration and shock - Human exposure - Vocabulary |
| BS ISO 582-1995 |
滚动轴承.倒角尺寸.最大值 |
Rolling bearings - Chamfer dimensions - Maximum values |
| BS ISO 5832-2-1999 |
外科植入物.金属材料.非合金钛 |
Implants for surgery - Metallic materials - Unalloyed titanium |
| BS ISO 5833-2002 |
外科植入物.丙烯酸树脂粘接剂 |
Implants for surgery - Acrylic resin cements |
| BS ISO 5834-1-1998 |
外科植入物.超高分子量聚乙烯.粉剂型 |
Implants for surgery - Ultra-high molecular weight polyethylene - Powder form |
| BS ISO 5834-2-1998 |
外科植入物.超高分子量聚乙烯.模塑成型 |
Implants for surgery - Ultra-high molecular weight polyethylene - Moulded forms |
| BS ISO 5834-4-2005 |
外科植入物.超高分子量聚乙烯.氧化指数测量法 |
|
| BS ISO 5841-2-2001 |
外科植入物.心脏起搏器.对使用脉搏发生器的人群的临床实践报告 |
Implants for surgery - Cardiac pacemakers - Reporting of clinical performance of populations of pulse generators or leads |
| BS ISO 5893-2002 |
橡胶和塑料的试验设备.拉伸、弯曲和压缩型.规范 |
Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification |
| BS ISO 5894-2000 |
船和造船技术.有螺栓紧固盖的人孔 |
Ships and marine technology - Manholes with bolted covers |
| BS ISO 5912-2004 |
野营帐篷 |
|
| BS ISO 592-2001 |
香精油.旋光度的测定 |
Essential oils - Determination of optical rotation |
| BS ISO 5943-2004 |
干酪及融化干酪制品.氯化物含量的测定.电位滴定法 |
|
| BS ISO 5943-2004 |
干酪及融化干酪制品.氯化物含量的测定.电位滴定法 |
|
| BS ISO 5952-2005 |
增强耐大气腐蚀结构级连续热轧薄钢板 |
|
| BS ISO 5952-2005 |
增强耐大气腐蚀结构级连续热轧薄钢板 |
|
| BS ISO 5984-2003 |
动物饲料.粗灰分的测定 |
Animal feeding stuffs - Determination of crude ash |
| BS ISO 5985-2003 |
动物饲料.盐酸不溶性灰分的测定 |
Animal feeding stuffs - Determination of ash insoluble in hydrochloric acid |
| BS ISO 5989-1996 |
摄影技术.照相卤化银剂冲洗用预包装化学药品词汇 |
Photography - Pre-packaged chemicals for the processing of silver halide based photographic materials - Vocabulary |
| BS ISO 5990-2002 |
照相.处理药液.亚硫酸钾650g/l水溶液规范 |
Photography - Processing chemicals - Specifications for potassium sulfite, 650 g/l solution |
| BS ISO 5991-2001 |
香精油.用减压蒸馏法测定残渣 |
Essential oils - Determination of residue content from distillation under reduced pressure |
| BS ISO 6-1995 |
摄影技术.黑白照相机负片/冲洗系统.ISO感光速度测定 |
Photography - Black-and-white pictorial still camera negative film/process systems - Determination of ISO speed |
| BS ISO 6020-1-1998 |
液压传动.16MPa(160bar)系列单杆液压缸装配尺寸.中型系列 |
Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Medium series |
| BS ISO 6020-2-1995 |
液压传动.单杆液压缸装配尺寸,16MPa系列.小型系列 |
Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Compact series |
| BS ISO 6020-3-1995 |
液压传动.16MPa(160bar)系列单杆液压缸用安装尺寸.内径从250mm到500mm的压制系列 |
(Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Compact series with bores from 250 mm to 500 mm) |
| BS ISO 6022-1997 |
液压传动.单杆液压缸.装配尺寸.250巴(25000kPa)系列 |
Hydraulic fluid power - Single rod cylinders - Mounting dimensions - 250 bar (25 000 kPa) series |
| BS ISO 6025-2001 |
电影摄影.35mm和16mm模拟摄影声音试验胶片.规范 |
Cinematography - Analogue photographic sound test films, 35 mm and 16mm - Specifications |
| BS ISO 603-1-1999 |
粘合磨料产品.尺寸.顶尖之间外圆磨削用砂轮 |
Bonded abrasive products - Dimensions - Grinding wheels for external cylindrical grinding between centres |
| BS ISO 603-10-1999 |
粘合磨料产品.尺寸.搪磨和超精整用磨石 |
Bonded abrasive products - Dimensions - Stones for honing and superfinishing |
| BS ISO 603-11-1999 |
粘合磨料产品.尺寸.手工精整油石 |
Bonded abrasive products - Dimensions - Hand finishing sticks |
| BS ISO 603-12-1999 |
粘合磨料产品.尺寸.在水平磨床上清理和整修毛刺用砂轮 |
Bonded abrasive products - Dimensions - Grinding wheels for deburring and fettling on a straight grinder |
| BS ISO 603-13-1999 |
粘合磨料产品.尺寸.在垂直磨床上清理和整修毛刺用砂轮 |
Bonded abrasive products - Dimensions - Grinding wheels for deburring and fettling on a vertical grinder |
| BS ISO 603-14-1999 |
粘合磨料产品.尺寸.在角形磨床上清理和整修毛刺用砂轮 |
Bonded abrasive products - Dimensions - Grinding wheels for deburring and fettling/snagging on an angle grinder |
| BS ISO 603-15-1999 |
粘合磨料产品.尺寸.固定或移动式切削机上的切削用砂轮 |
Bonded abrasive products - Dimensions - Grinding wheels for cutting-off on stationary or mobile cutting-off machines |
| BS ISO 603-16-1999 |
粘合磨料产品.尺寸.手持动力工具的切削用砂轮 |
Bonded abrasive products - Dimensions - Grinding wheels for cutting-off on hand-held power tools |
| BS ISO 603-2-1999 |
粘合的磨料制品.尺寸.无顶尖的外圆磨削用砂轮 |
Bonded abrasive products - Dimensions - Grinding wheels for centreless external cylindrical grinding |
| BS ISO 603-3-1999 |
粘合的磨料制品.尺寸.内圆磨削用砂轮 |
Bonded abrasive products - Dimensions - Grinding wheels for internal cylindrical grinding |
| BS ISO 603-4-1999 |
粘合磨料产品.尺寸.表面磨削/周边磨削用砂轮 |
Bonded abrasive products - Dimensions - Grinding wheels for surface grinding/peripheral grinding |
| BS ISO 603-5-1999 |
粘合磨料产品.尺寸.表面/平面磨削用砂轮 |
Bonded abrasive products - Dimensions - Grinding wheels for surface grinding/face grinding |
| BS ISO 603-6-1999 |
粘合磨料产品.尺寸.工具和工具室磨削用砂轮 |
Bonded abrasive products - Dimensions - Grinding wheels for tool and toolroom grinding |
| BS ISO 603-7-1999 |
粘合磨料产品.尺寸.手工磨削用砂轮 |
Bonded abrasive products - Dimensions - Grinding wheels for manually guided grinding |
| BS ISO 603-8-1999 |
粘合磨料产品.尺寸.清除毛刺和修整用砂轮 |
Bonded abrasive products - Dimensions - Grinding wheels for deburring and fettling/snagging |
| BS ISO 603-9-1999 |
粘合磨料产品.尺寸.高压磨削用砂轮 |
Bonded abrasive products - Dimensions - Grinding wheels for high pressure grinding |
| BS ISO 6036-1996 |
电影摄影.电视用彩色电影印刷品和幻灯片 |
Cinematography - Colour motion-picture prints and slides for television - Density specifications |
| BS ISO 6038-1995 |
电影技术.70mm,65mm,35mm和16mm电影胶片用的拼接接片.尺寸和位置 |
Cinematography - Splices for use on 70 mm, 65 mm, 35 mm and 16 mm motion-picture films - Dimensions and locations |
| BS ISO 6055-1997 |
高升程乘坐式运货车.顶防护板.规范和试验 |
High-lift rider trucks - Overhead guards - Specification and testing |
| BS ISO 6055-2004 |
工业用货车.护顶架.规范和试验 |
|
| BS ISO 6072-2002 |
液压传动.流体和标准合成橡胶材料间的兼容性 |
Hydraulic fluid power - Compatibility between fluids and standard elastomeric materials |
| BS ISO 6073-1998 |
石油产品.液压传动系统用石油液体体积模量的预测 |
Petroleum products - Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems |
| BS ISO 6099-2001 |
液动系统和件.液压缸.装配尺寸和装配类型的识别代码 |
Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types |
| BS ISO 6104-2005 |
高强度磨料制品.金刚石或立方氮化硼旋转磨削工具.一般评述、名称和多种语言术语 |
|
| BS ISO 6105-1-2004 |
超级研磨切断砂轮用坯件.建筑和土木工程用人工切割 |
|
| BS ISO 6105-2-2004 |
超级研磨切断砂轮用坯件.建筑和土木工程用手持式切割 |
|
| BS ISO 6107-1-2004 |
水质.词汇.第1部分 |
|
| BS ISO 6107-3-1993 |
水质量.词汇.第3部分 |
Water quality - Vocabulary - Part 3 |
| BS ISO 6107-5-2004 |
水质.词汇.第5部分 |
|
| BS ISO 6107-6-2004 |
水质.词汇.第6部分 |
|
| BS ISO 6107-8-1993 |
水质量.词汇.第8部分 |
Water quality - Vocabulary - Part 8 |
| BS ISO 611-2003 |
道路车辆.机动车辆及其拖车的制动.词汇 |
(Road vehicles - Braking of automotive vehicles and their trailers - Vocabulary) |
| BS ISO 6133-1998 |
橡胶和塑料.测定撕裂强度和粘合强度时获得的多峰值曲线的分析 |
Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com