标准号 |
中文名称 |
英文名称 |
| BS 3762-3.24-1988 |
配制洗涤剂分析.第3部分:定量试验方法.第24节:低分子量酒精含量的测定方法 |
(Analysis of formulated detergents - Quantitative test methods - Method for determination of low molecular mass alcohols content) |
| BS 3762-3.25-1989 |
配制洗涤剂分析.第3部分:定量试验方法.第23节:水分与挥发物质含量的测定方法 |
(Analysis of formulated detergents - Quantitative test methods - Methods for determination of water and volatile matter content) |
| BS 3762-3.5-1986 |
配制洗涤剂分析.第3部分:定量试验方法.第5节:全有机物质含量的测定方法 |
(Analysis of formulated detergents - Quantitative test methods - Methods for determination of total organic matter content) |
| BS 3762-3.6-1986 |
配制洗涤剂分析.第3部分:定量试验方法.第6节:石油醚可溶物质的测定方法 |
(Analysis of formulated detergents - Quantitative test methods - Method for determination of matter soluble in light petroleum) |
| BS 3762-3.7-1986 |
配制洗涤剂分析.第3部分:定量试验方法.第7节:非离子物质总含量的测定方法 |
(Analysis of formulated detergents - Quantitative test methods - Method for determination of total non-ionic matter content) |
| BS 3762-3.8-1986 |
配制洗涤剂分析.第3部分:定量试验方法.第8节:链烷醇酰胺含量的测定方法 |
(Analysis of formulated detergents - Quantitative test methods - Method for determination of alkanolamides content) |
| BS 3762-3.9-1986 |
配制洗涤剂分析.第3部分:定量试验方法.第9节:皂含量测定方法 |
(Analysis of formulated detergents - Quantitative test methods - Method for determination of soap content) |
| BS 3762-4.1-1989 |
配制洗涤剂分析.第4部分:物理试验方法.第1节:液体洗涤剂透明点的测定方法 |
(Analysis of formulated detergents - Physical test methods - Method for determination of clear point of liquid detergents) |
| BS 3762-4.2-1986 |
配制洗涤剂分析.第4部分:物理试验方法.第2节:表观体密度的测定方法 |
(Analysis of formulated detergents - Physical test methods - Method for determination of apparent bulk density) |
| BS 3766-1978 |
机床用冷却液泵规范 |
(Specification for coolant pumps for machine tools) |
| BS 3769-1964 |
环烷酸铜及环烷酸铜浓缩物规范 |
(Specification for copper naphthenate and copper naphthenate concentrates) |
| BS 3770-1964 |
环烷酸锌及环烷酸锌浓缩物规范 |
(Specification for zinc naphthenate and zinc naphthenate concentrates) |
| BS 3775-1964 |
放射性检定用计数盘规范 |
(Specification for counting trays (planchets) for radioactive assay) |
| BS 3783-1964 |
人员防护X射线用夹铅橡胶围裙规范 |
(Specification for X-ray lead-rubber protective aprons for personal use) |
| BS 3788-1984 |
烹调用具锡覆层精整规范 |
(Specification for tin coated finish on culinary utensils) |
| BS 3789-1975 |
一次性使用的纤维板番茄盘规范 |
(Specification for non-returnable fibreboard tomato trays) |
| BS 3790-1995 |
环形楔状皮带传动及环形三角皮带传动规范 |
(Specification for endless wedge belt drives and endless V-belt drives) |
| BS 3799-1974 |
石油工业用钢管配件、螺旋管接头和套管焊接规范 |
(Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry) |
| BS 3800-3-1990 |
机床的一般试验.第3部分:机床在热变形负载条件下运行性能的试验方法 |
(General tests for machine tools - Method of testing performance of machines operating under loaded conditions in respect of thermal distortion) |
| BS 3810-1-1964 |
材料装卸用术语词汇.第1部分:与托盘货车、托盘搬运车、手推运货车和机动运货车有关的术语 |
(Glossary of terms used in materials handling - Terms used in connection with pallets, stillages, hand and powered trucks) |
| BS 3810-2-1965 |
材料装卸用术语词汇.第2部分:与输送机及提升机(气动和液压装卸除外)有关的术语 |
(Glossary of terms used in materials handling - Terms used in connection with conveyors and elevators (excluding pneumatic and hydraulic handling)) |
| BS 3810-3-1967 |
材料装卸用术语词汇.第3部分:与气动及液压装卸有关的术语 |
(Glossary of terms used in materials handling - Terms used in connection with pneumatic and hydraulic handling) |
| BS 3810-4-1968 |
材料装卸用术语词汇.第4部分:与起重机有关的术语 |
(Glossary of terms used in materials handling - Terms used in connection with cranes) |
| BS 3810-5-1971 |
材料装卸用术语词汇.第5部分:与提升拾取器有关的术语 |
(Glossary of terms used in materials handling - Terms used in connection with lifting tackle) |
| BS 3810-6-1973 |
材料装卸用术语词汇.第6部分:与滑轮组有关的术语 |
(Glossary of terms used in materials handling - Terms used in connection with pulley blocks) |
| BS 3810-7-1973 |
材料装卸用术语词汇.第7部分:与架空索道及索道有关的术语 |
(Glossary of terms used in materials handling - Terms used in connection with aerial ropeways and cableways) |
| BS 3810-8-1975 |
材料装卸用术语词汇.第8部分:与升降机、升降台以及倾斜拖运有关的术语 |
(Glossary of terms used in materials handling - Terms used in connection with lifts, lifting platforms and inclined haulages) |
| BS 3810-9-1975 |
材料装卸用术语词汇.第9部分:与铁路运输有关的术语 |
(Glossary of terms used in materials handling - Terms used in connection with rail transport) |
| BS 3811-1993 |
泰罗制用术语词汇 |
(Glossary of terms used in terotechnology) |
| BS 3813-1-1964 |
商业和住宅房屋废弃物用焚烧炉规范.第一部分:焚烧力为501b/h-10001b/h的焚烧炉 |
(Specification for incinerators for waste from trade and residential premises - Capacities between 50 lb/h and 1000 lb/h) |
| BS 3816-1989 |
电绝缘用工频环氧树脂铸造系统规范 |
(Specification for epoxy resin casting systems used for electrical insulating applications at power frequencies) |
| BS 3818-1964 |
柴油机车及有轨内燃机车的自封加油接头规范 |
(Specification for self-sealing fuelling couplings for diesel locomotives and diesel railcars) |
| BS 381C-1996 |
识别,编码和专用颜色规范 |
(Specification for colours for identification, coding and special purposes) |
| BS 3821-1-1974 |
硬质合金模具和配套硬质合金工具规范.第1部分:烧结模坯和精加工模的名称与标志 |
(Specification for hardmetal dies and associated hardmetal tools - Designation and marking of as-sintered pellets and finished dies) |
| BS 3821-2-1974 |
硬质合金模具和配套硬质合金工具规范.第2部分:拉制圆金属丝用烧结模坯和精加工模 |
(Specification for hardmetal dies and associated hardmetal tools - As-sintered pellets and finished dies for drawing round wire) |
| BS 3821-3-1974 |
硬质合金模具和配套硬质合金工具规范.第3部分:拉制圆棒材用烧结模坯和精加工模 |
(Specification for hardmetal dies and associated hardmetal tools - As-sintered pellets and finished dies for drawing round bar) |
| BS 3821-4-1982 |
硬质合金模具和配套硬质合金工具规范.第4部分:顶锻模用硬质合金烧结模坯的尺寸和公差 |
(Specification for hardmetal dies and associated hardmetal tools - Dimensions and tolerances of as-sintered hardmetal pellets used in heading dies) |
| BS 3823-1990 |
手工工具用槐木和山核桃木柄的分级 |
(Grading of ash and hickory wood handles for hand tools) |
| BS 3828-1973 |
石英玻璃规范 |
(Specification for crystal glass) |
| BS 3830-1973 |
搪瓷钢建筑构件规范 |
(Specification for vitreous enamelled steel building components) |
| BS 3831-1964 |
家用器具和餐具搪瓷精加工规范 |
(Specification for vitreous enamel finishes for domestic and catering appliances) |
| BS 3837-1-1986 |
泡沫聚苯乙烯板.第1部分:可膨胀珠状材料板规范 |
(Expanded polystyrene boards - Specification for boards manufactured from expandable beads) |
| BS 3837-1-2004 |
泡沫聚苯乙烯板.可膨胀珠状材料制板材和块材.要求和试验方法 |
|
| BS 3838-1980 |
运动短外衣织物规范 |
(Specification for blazer fabrics) |
| BS 3839-1978 |
电子管及半导体器件用高导电率无氧铜规范 |
(Specification for oxygen-free high-conductivity copper for electronic tubes and semiconductor devices) |
| BS 3841-1-1994 |
家用人造固体燃料烟排放的测定.烟排放率的一般测定方法 |
(Determination of smoke emission from manufactured solid fuels for domestic use - General method for determination of smoke emission rate) |
| BS 3841-2-1994 |
家用人造固体燃料烟排放的测定.烟排放率的测量方法 |
(Determination of smoke emission from manufactured solid fuels for domestic use - Methods for measuring the smoke emission rate) |
| BS 3843-1-1992 |
资产经济管理的泰罗制导则.泰罗制简介 |
(Guide to terotechnology (the economic management of assets) - Introduction to terotechnology) |
| BS 3843-2-1992 |
资产经济管理的泰罗制导则.技术和应用介绍 |
(Guide to terotechnology (the economic management of assets) - Introduction to the techniques and applications) |
| BS 3843-3-1992 |
资产的经济管理的泰罗制导则.适用技术指南 |
(Guide to terotechnology (the economic management of assets) - Guide to the available techniques) |
| BS 3858-1992 |
电缆和接线用捆扎和识别套管规范 |
(Specification for binding and identification sleeves for use on electric cables and wires) |
| BS 3863-1992 |
燃气轮机的采购指南 |
(Guide for gas turbines procurement) |
| BS 3866-1979 |
钮扣孔和穿线部分规范 |
(Specification for holes and shanks for buttons) |
| BS 3868-1995 |
预制排水用镀锌钢管件规范 |
(Specification for prefabricated drainage stack units in galvanized steel) |
| BS 387-1979 |
金属冷切削用整体和镶齿圆锯驱动部分的互换尺寸规范:圆锯直径范围224mm-2240mm |
(Specification for interchangeability dimensions of the drive of solid and segmental circular saws for cold cutting of metals: saw diameter range 224 mm to 2240 mm) |
| BS 3870-1-1991 |
针脚和缝.第1部分:针脚类型分类和术语 |
(Stitches and seams - Classification and terminology of stitch types) |
| BS 3870-2-1991 |
针脚和缝.第2部分:缝的类型的分类和术语 |
(Stitches and seams - Classification and terminology of seam types) |
| BS 3876-1-1990 |
煤井轨道运输用缆绳滚筒、滑轮、框架和组件.第1部分:平行鼓形筒、框架和组件规范 |
(Rope rollers, pulleys, mountings and assemblies for colliery track haulage - Specification for parallel barrel rollers, mountings and assemblies) |
| BS 3876-2-1990 |
煤井轨道运输用缆绳滚筒、滑轮、框架和组件.第2部分:垂直主轴轮,框和组件规范 |
(Rope rollers, pulleys, mountings and assemblies for colliery track haulage - Specification for vertical spindle pulleys, mountings and assemblies) |
| BS 3876-5-1990 |
煤井轨道运输用缆绳滚筒、滑轮、框架和组件.第5部分:悬挂式滑轮组件和夹件规范 |
(Rope rollers, pulleys, mountings and assemblies for colliery track haulage - Specification for suspended pulley assemblies and clamps) |
| BS 3877-1991 |
金属切削用带锯条规范 |
(Specification for metal cutting bandsaw blades) |
| BS 3878-1982 |
医院用软聚氯乙烯薄膜规范 |
(Specification for flexible PVC sheeting for hospital use) |
| BS 388-1972 |
铝颜料规范 |
(Specification for aluminium pigments) |
| BS 3880-1-1971 |
数据处理用纸带规范.第1部分:未穿孔纸带 |
(Specification for paper tape for data processing - Unpunched paper tape) |
| BS 3880-2-1971 |
数据处理用纸带规范.第2部分:纸带中穿孔的尺寸与位置 |
(Specification for paper tape for data processing - Dimensions and location of punched holes in paper tape) |
| BS 3880-3-1971 |
数据处理用纸带规范.第3部分:纸带上代码的表示方法 |
(Specification for paper tape for data processing - Representation of codes on paper tape) |
| BS 3880-4-1972 |
数据处理用纸带规范.第4部分:穿孔纸带数据交换的一般要求 |
(Specification for paper tape for data processing - General requirements for data interchange on punched paper tape) |
| BS 3882-1994 |
表土规范 |
(Specification for topsoil) |
| BS 3884-1-1974 |
机床的可互换标准件.基准件规范 |
(Modular units for machine tools - Specification for basic units) |
| BS 3884-2-1990 |
机床的可互换标准件.第2部分:公称尺寸为800mm及其以下的工件托盘规范 |
(Modular units for machine tools - Specification for workholding pallets up to 800 mm nominal size) |
| BS 3884-3-1990 |
机床的可互换标准件.第3部分:公称尺寸为800mm以上的工件托盘规范 |
(Modular units for machine tools - Specification for workholding pallets over 800 mm nominal size) |
| BS 3886-1965 |
牙印模化合物规范 |
(Specification for dental impression compound) |
| BS 3887-1991 |
压敏粘合剂粘合密封带规范 |
(Specification for pressure sensitive adhesive closing and sealing tapes) |
| BS 3890-1965 |
辐射监测胶片的试验、校准与处理的一般推荐标准 |
(General recommendations for the testing, calibration and processing of radiation monitoring films) |
| BS 3892-1-1997 |
粉状燃灰.拌和硅酸盐水泥使用的粉状燃料灰规范 |
(Pulverized-fuel ash - Specification for pulverized-fuel ash for use with Portland cement) |
| BS 3892-2-1996 |
粉状燃灰.第2部分:作为I类添加剂使用的粉状燃灰的规格 |
(Pulverized-fuel ash - Specification for pulverized-fuel ash to be used as a Type I addition) |
| BS 3892-3-1997 |
粉状燃灰.第3部分:粘结薄泥浆使用的粉状燃灰的规范 |
(Pulverized-fuel ash - Specification for pulverized-fuel ash for use in cementitious grouts) |
| BS 3895-1976 |
放射性物质安全运输包装的设计、检验及使用指南 |
(Guide to the design, testing and use of packaging for the safe transport of radioactive materials) |
| BS 3900-A10-1998 |
涂料的试验方法.液体涂料的试验(不包括化学试验).通过干燥涂层的密度测量测定非挥发物质的容积百分比 |
(Methods of test for paints - Tests on liquid paints (excluding chemical tests) - Determination of percentage volume of non-volatile matter by measurement of the density of a dried coating) |
| BS 3900-A11-1974 |
涂料的试验方法.第A集:液体涂料试验(化学试验除外).第11部分:可燃性的小规模试验 |
(Methods of test for paints - Tests on liquid paints (excluding chemical tests) - Small scale test for combustibility) |
| BS 3900-A13-1986 |
涂料的试验方法.第A集:液体涂料试验(化学试验除外).第13部分:闪火/非闪火试验(快速平衡法) |
(Methods of test for paints - Test for flash/no flash (rapid equilibrium method)) |
| BS 3900-A16-1986 |
涂料的试验方法.第A集:液体涂料试验(化学试验除外).第16部分:刷子涂刷的自然扩展速率的测定 |
(Methods of test for paints - Tests on liquid paints (excluding chemical tests) - Determination of natural spreading rate by brush application) |
| BS 3900-A17-1986 |
涂料的试验方法.第A集:液体涂料试验(化学试验除外).第17部分:试验板条以规定扩展速率进行的涂漆 |
(Methods of test for paints - Tests on liquid paints (excluding chemical tests) - Coating of test panels at a specified spreading rate) |
| BS 3900-A19-1998 |
涂料的试验方法.比重瓶法对密度的测定 |
(Methods of test for paints. Determination of density by the pyknometer method) |
| BS 3900-A20-1998 |
涂料的试验方法.浸体(铅锤)法对密度的测定 |
(Methods of test for paints. Determination of density by the immersed body (plummet) method) |
| BS 3900-A21-1998 |
涂料的试验方法.摆动法对密度的测定 |
(Methods of test for paints. Determination of density by the oscillation method) |
| BS 3900-A22-1998 |
涂料的试验方法.压力杯法对密度的测定 |
(Methods of test for paints. Determination of density by the pressure cup method) |
| BS 3900-A26-2000 |
涂料的试验方法.液体涂料试验(包括化学试验).离心法测定色料含量 |
(Methods of test for paints - Tests on liquid paints (excluding chemical tests) - Determination of pigment content by centrifuge) |
| BS 3900-A27-2000 |
涂料的试验方法.液体涂料试验(包括化学试验).灰化法测定色料含量 |
(Methods of test for paints - Tests on liquid paints (excluding chemical tests) - Determination of pigment content by ashing) |
| BS 3900-A28-2000 |
涂料的试验方法.液体涂料试验(包括化学试验).过滤法测定色料含量 |
(Methods of test for paints - Tests on liquid paints (excluding chemical tests) - Determination of pigment content by filtration) |
| BS 3900-A5-1991 |
涂料的试验方法.第A集:液体涂料试验(化学试验除外).第5部分:涂料和清漆的大面积涂刷试验 |
(Methods of test for paints - Large-scale brushing tests for paints and varnishes) |
| BS 3900-A7-2-2003 |
色漆试验方法.液体色漆的试验(化学试验除外).测定高速率剪切下色漆的粘度.以规定速率工作的盘式或球式粘度 |
() |
| BS 3900-A7.1-2000 |
涂料的试验方法.液体涂料试验(化学试验除外).高剪切率涂料粘度的测定.锥形和板式粘度计 |
(Methods of test for paints - Tests on liquid paints (excluding chemical tests) - Determination of the viscosity of paint at a high rate of shear - Cone and plate viscometer) |
| BS 3900-A8-1986 |
涂料的试验方法.第A集:液体涂料试验(化学试验除外).第8部分:闪火/非闪火试验(闭杯平衡法) |
(Methods of test for paints - Tests on liquid paints (excluding chemical tests) - Test for flash/no flash (closed cup equilibrium method)) |
| BS 3900-A9-1986 |
涂料的试验方法.第A集:液体涂料试验(化学试验除外).第9部分:闪点的测定 |
(闭环平衡法(Methods of test for paints - Determination of flashpoint (closed cup equilibrium method)) |
| BS 3900-B10-1986 |
涂料的试验方法.第B集:液体涂料与干涂料膜的试验(包括化学检验).第10部分:固体物质的六价铬含量的测定 |
Methods of test for paints - Tests involving chemical examination of liquid paints and dried paint films - Determination of hexavalent chromium content of solid matter |
| BS 3900-B11-1986 |
涂料的试验方法.第B集:液体涂料与干涂料膜的试验(包括化学检验).第11部分:液体物质的全铬含量的测定 |
(Methods of test for paints - Tests involving chemical examination of liquid paints and dried paint films - Determination of total chromium content of liquid matter) |
| BS 3900-B12-1986 |
涂料的试验方法.第B集:液体涂料与干涂料膜的试验(包括化学检验).第12部分:可溶性汞含量的测定 |
(Methods of test for paints - Tests involving chemical examination of liquid paints and dried paint films - Determination of ’soluble’ mercury content) |
| BS 3900-B15-1987 |
涂料的试验方法.第B集:液体涂料与干涂料膜的试验(包括化学检验).第15部分:液体涂料中铅的快速估算方法 |
(Methods of test for paints - Rapid method for estimation of lead in liquid paints) |
| BS 3900-B16-1990 |
涂料的试验方法.包括化学检验的液体涂料与干涂料膜的试验.全汞含量的测定 |
(Methods of test for paints - Tests involving chemical examination of liquid paints and dried paint films - Determination of total mercury) |
| BS 3900-B3-1983 |
涂料的试验方法.第B集:液体涂料与干涂料膜的试验(不包括化学检验).第3部分:液体涂料的固体物质中可溶性铅的 |
(S,I,1980NO.1248)一起使用的方法() |
| BS 3900-B4-1986 |
涂料的试验方法.第B集:液体涂料与干涂料膜的试验(不包括化学检验).第4部分:涂料及类似材料中全铅含量的测定 |
(Methods of test for paints - Tests involving chemical examination of liquid paints and dried paint films - Determination of total lead in paints and similar materials) |
| BS 3900-B5-1986 |
涂料的试验方法.第B集:液体涂料与干涂料膜的试验(不包括化学检验).第5部分:液体涂料或覆层粉萃取物的制备 |
(Methods of test for paints - Tests involving chemical examination of liquid paints and dried paint films - Preparation of acid extracts from liquid paints or coating powders) |
| BS 3900-B6-1986 |
涂料的试验方法.第B集:液体涂料与干涂料膜的试验(不包括化学检验).第6部分:可溶性铅含量的测定 |
(Methods of test for paints - Tests involving chemical examination of liquid paints and dried paint films - Determination of ’soluble’ lead content) |
| BS 3900-B7-1986 |
涂料的试验方法.第B集:液体涂料与干涂料膜的试验(不包括化学检验).第7部分:可溶性锑含量的测定 |
(Methods of test for paints - Tests involving chemical examination of liquid paints and dried paint films - Determination of ’soluble’ antimony content) |
| BS 3900-B8-1986 |
涂料的试验方法.第B集:液体涂料与干涂料膜的试验(包括化学检验).第8部分:可溶性钡含量的测定 |
(Methods of test for paints - Tests involving chemical examination of liquid paints and dried paint films - Determination of ’soluble’ barium content) |
| BS 3900-B9-1986 |
涂料的试验方法.第B集:液体涂料与干涂料膜的试验(包括化学检验).第9部分:可溶性镉含量的测定 |
(Methods of test for paints - Tests involving chemical examination of liquid paints and dried paint films - Determination of ’soluble’ cadmium content) |
| BS 3900-C1-1965 |
涂料的试验方法.涂料膜形成的有关试验.湿侧面时间 |
(Methods of test for paints - Tests associated with paint film formation - Wet edge time) |
| BS 3900-C5-1997 |
涂料的试验方法.膜厚度的测定 |
(Methods of test for paints. Determination of film thickness) |
| BS 3900-C6-2000 |
涂料的试验方法.涂料膜形成的有关试验.研磨细度的测定 |
(Methods of test for paints - Tests associated with paint film formation - Determination of fineness of grind) |
| BS 3900-C9-1982 |
涂料的试验方法.涂膜形成的有关试验.产品与被涂覆表面相容性的评定方法 |
(Methods of test for paints - Tests associated with paint film formation - Methods for evaluation of the compatibility of a product with a surface to be painted) |
| BS 3900-D1-1998 |
涂料的试验方法.涂料颜色的视觉比较 |
(Methods of test for paints. Visual comparison of the colour of paints) |
| BS 3900-D10-1986 |
涂料的试验方法.第D集:涂料膜的光学试验.第10部分:颜色和色差的测定:计算 |
(Methods of test for paints - Determination of colour and colour difference: calculation) |
| BS 3900-D11-1998 |
涂料的试验方法.涂料膜的光学试验.浅色漆在固定喷涂速度下对比度(光学)的测定 |
(Methods of test for paints - Optical tests on paint films - Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate) |
| BS 3900-D13-2000 |
涂料的试验方法.20度时漆膜光泽度反射的测定 |
(Methods of test for paints - Optical tests on paint films - Determination of reflection haze on paint films at 20 degrees) |
| BS 3900-D4-1974 |
涂料的试验方法.第D4部分:同一类型和颜色涂料对比率(遮盖力)的比较 |
(Methods of test for paints - Optical tests on paint films - Comparison of contrast ratio (hiding power) of paints of the same type and colour) |
| BS 3900-D5-1997 |
涂料的试验方法.涂料膜的光学试验.非金属涂料膜在20度、60度和85度镜面光泽的测定 |
(Methods of test for paints. Optical tests on paint films. Measurement of specular gloss of non-metallic paint films at 20) |
| BS 3900-D6-1982 |
涂料的试验方法.涂料膜的光学试验.浅色涂料在固定扩展速率下的对比率(不透明性)测定(用聚脂薄膜) |
(Methods of test for paints - Optical tests on paint films - Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate, using polyester film) |
| BS 3900-D7-1983 |
涂料的试验方法.第D集:涂料膜的光学试验.第7部分:白色和浅色涂料遮盖力的库比尔凯-芒克测定法 |
(Methods of test for paints - Optical tests on paint films - Determination of hiding power of white and light-coloured paints by the Kubelka-Munk method) |
| BS 3900-D8-1986 |
涂料的试验方法.第D集:涂料膜的光学试验.第8部分:颜色和色差的测定:原理 |
(Methods of test for paints - Optical tests on paint films - Determination of colour and colour difference: principles) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com