标准号 |
中文名称 |
英文名称 |
| BS ISO 15373-2001 |
塑料.聚合物水分散体.游离甲醛含量的测定 |
(Plastics - Polymer dispersions - Determination of free formaldehyde) |
| BS ISO 15374-1998 |
外科植入物.锻件制品要求 |
(Implants for surgery - Requirements for production of forgings) |
| BS ISO 15379-1-2004 |
铝生产用含碳材料.阴极块材料.压力作用下由于钠渗透引起的膨胀的测定 |
|
| BS ISO 15379-2-2004 |
铝生产用碳质材料.阴极块材料.无压力作用下由于钠渗透引起的膨胀的测定 |
|
| BS ISO 15380-2002 |
润滑剂、工业用油和相关产品(L类).系列H(液压系统).HETG, HEPG, HEES 和 HEPR类的规范 |
Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPR |
| BS ISO 15389-2004 |
航天系统.飞行着陆脱落插头 |
|
| BS ISO 15390-2004 |
航天环境(自然和人工).星系宇宙射线模型 |
|
| BS ISO 15390-2004 |
航天环境(自然和人工).星系宇宙射线模型 |
|
| BS ISO 15394-2000 |
包装.航运、运输和可接受标签的两维符号和条码 |
Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labels |
| BS ISO 15401-2000 |
船和造船技术.散货船.船体结构的建造质量 |
Ships and marine technology - Bulk carriers - Construction quality of hull structure |
| BS ISO 15402-2000 |
船和造船技术.散货船.船体结构的修理质量 |
Ships and marine technology - Bulk carriers - Repair quality of hull structure |
| BS ISO 15403-2000 |
天然气.用作车辆压缩燃料的天然气质量的名称与符号 |
Natural gas - Designation of the quality of natural gas for use as a compressed fuel for vehicles |
| BS ISO 15407-1-2000 |
18mm和26mm五气口气动方向控制阀.无电插头的安装界面 |
Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces without electrical connector |
| BS ISO 15407-2-2003 |
气压传动.五气口方向控制阀,规格18mm和26mm.有任选电接头的安装接口 |
(Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces with optional electrical connector) |
| BS ISO 15459-1-2000 |
信息技术.传输块体的特殊识别.总则 |
Information technology - Unique identification of transport units - General |
| BS ISO 15469-1998 |
日光的空间分布.CIE标准阴天和晴天 |
Spatial distribution of daylight - CIE standard overcast sky and clear sky |
| BS ISO 15469-2004 |
日光的空间分布.CIE标准普通天 |
|
| BS ISO 15470-2005 |
表面化学分析.X射线光电光谱法.选定的仪器性能参数的描述 |
|
| BS ISO 15471-2005 |
表面化学分析.俄歇电子光谱法.选定的仪器性能参数的描述 |
|
| BS ISO 15472-2001 |
表面化学分析.X-射线光电谱.能量刻度的校正 |
Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales |
| BS ISO 15489-1-2001 |
信息和文献工作.记录品管理.总则 |
Information and documentation - Records management - General |
| BS ISO 15490-2001 |
细陶瓷(高级陶瓷、高级工业陶瓷).室温下单片陶瓷抗拉强度的试验方法 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for tensile strength of monolithic ceramics at room temperature |
| BS ISO 155-1999 |
皮带传动.皮带轮.中心调整极限值 |
Belt drives - Pulleys - Limiting values for adjustment of centres |
| BS ISO 15509-2001 |
胶粘剂.工程塑料接头粘结强度的测定 |
Adhesives - Determination of the bond strength of engineering-plastic joints |
| BS ISO 15511-2004 |
信息和文献工作.图书馆和相关组织的国际标准标识符 |
|
| BS ISO 15511-2004 |
信息和文献工作.图书馆和相关组织的国际标准标识符 |
|
| BS ISO 15512-1999 |
塑料.水含量的测定 |
Plastics - Determination of water content |
| BS ISO 15513-2000 |
起重机.起重机司机(操纵者)、吊装工、信号员和助手的资格要求 |
Cranes - Competency requirements for crane drivers (operators), slingers, signallers and assessors |
| BS ISO 15517-2004 |
烟草.硝酸盐含量的测定.连续流分析法 |
|
| BS ISO 15517-2004 |
烟草.硝酸盐含量的测定.连续流分析法 |
|
| BS ISO 15529-1999 |
光学和光学仪器.透光功能.样品成像系统调整透光功能(MTF)的测量原理 |
Optics and optical instruments - Optical transfer function - Principles of measurement of modular transfer function (MTF) of sampled imaging systems |
| BS ISO 15544-2001 |
石油和天然气工业.海上生产装置.紧急响应要求和导则 |
Petroleum and natural gas industries - Offshore production installations - Requirements and guidelines for emergency response |
| BS ISO 15550-2002 |
内燃机.测量发动机功率的测定方法.总要求 |
Internal combustion engines - Determination and method for the measurement of engine power - General requirements |
| BS ISO 15552-2004 |
气压传动.具有可拆卸安装件的、1000kPa(10 bar)系列、孔径为32mm至320mm的气缸.基础尺寸、安装尺寸和附件尺寸 |
|
| BS ISO 15554-1999 |
食品加工中γ辐射线辐射设备剂量测定的实施规程 |
Practice for dosimetry in gamma irradiation facilities for food processing |
| BS ISO 15557-1999 |
辐射铬膜剂量测定系统的实施规程 |
Practice for use of a radiochromic film dosimetry system |
| BS ISO 15558-1999 |
聚甲基丙烯酸甲酯剂量测定系统的实施规程 |
Practice for use of a polymethylmethacrylate dosimetry system |
| BS ISO 15559-1999 |
辐射化学光学波导剂量测定系统的实施规程 |
Practice for use of a radiochromic optical waveguide dosimetry system |
| BS ISO 15560-1999 |
用高剂量辐射剂量实验室校验的性能和特性的实施规程 |
Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory |
| BS ISO 15562-1999 |
食品加工用电离辐射和韧性辐射设备剂量测定的实施规程 |
Practice for dosimetry in electron and bremsstrahlung irradiation facilities for food processing |
| BS ISO 15563-1999 |
乙醇-氯苯剂量测定系统的实施规程 |
Practice for use of the ethanol-chlorobenzene dosimetry system |
| BS ISO 15564-1999 |
辐射敏感指示计的使用指南 |
Guide for use of radiation-sensitive indicators |
| BS ISO 15565-1999 |
液态铬辐射剂量测定系统的使用规程 |
Practice for use of a radiochromic liquid dosimetry system |
| BS ISO 15567-1999 |
X-射线(韧性辐射)剂量测定的实施规程 |
Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing |
| BS ISO 15570-1999 |
纤维素乙酸酯剂量测定系统的使用规程 |
Practice for use of cellulose acetate dosimetry system |
| BS ISO 15583-2005 |
船舶和海上技术.海运标准清单 |
|
| BS ISO 15592-1-2001 |
切细烟草及其烟制品.抽样、调节和分析方法.抽样 |
Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Sampling |
| BS ISO 15592-2-2001 |
切细烟草及其烟制品.抽样、调节和分析方法.调节和检验用大气环境 |
Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Atmosphere for conditioning and testing |
| BS ISO 15592-3-2003 |
细切烟草及其烟制品.抽样、调节和分析方法.用常规分析吸烟机测定烟制品中颗粒物质总量、水和烟碱测定的准备和无烟碱干燥颗粒物质的计算 |
Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and |
| BS ISO 15593-2001 |
环境烟草烟雾.呼吸悬浮颗粒评价.通过荧光和紫外线吸收对颗粒物质的测定 |
Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Determination of particulate matter by ultraviolet absorbance and by fluorescence |
| BS ISO 15597-2004 |
石油和石油产品试验方法.BS 2000-503:氯和溴含量的测定.波长色散X射线荧光光谱测定法 |
|
| BS ISO 15600-2000 |
模具.注塑模用隔热板 |
Tools for moulding - Thermal insulating sheets for injection moulds |
| BS ISO 15621-1999 |
吸尿辅助器.评定的一般指南 |
Urine-absorbing aids - General guidance on evaluation |
| BS ISO 15629-2002 |
物料搬运托盘.新托盘组件和用过的木制平托盘检修用紧固件质量 |
Pallets for materials handling - Quality of fasteners for assembly of new and repair of used, flat, wooden pallets |
| BS ISO 15632-2002 |
微光束分析.带半导体探测器的能量散射X射线光谱仪的仪器规范 |
Microbeam analysis - Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors |
| BS ISO 15634-2005 |
铁矿石.铬含量的测定.火焰原子吸收光谱测定法 |
|
| BS ISO 15635-2003 |
砂布.页轮圆盘 |
(Coated abrasives - Flap discs) |
| BS ISO 15636-2003 |
刚纸圆盘用辅助垫片 |
(Back-up pads for vulcanized fibre discs) |
| BS ISO 15637-1-2002 |
圆柱形研磨套筒支承夹具.手动砂轮机用带柄的支承夹具 |
Holding fixtures of cylindrical abrasive sleeves - Holding fixtures with shank for hand-held grinding machines |
| BS ISO 15637-2-2002 |
圆柱形研磨套筒支承夹具.固定机械用支承夹具 |
Holding fixtures of cylindrical abrasive sleeves - Holding fixtures for stationary machines |
| BS ISO 15643-2002 |
道路建设和维修设备.沥青粘合剂摊铺机/铁铣.术语和商业规范 |
Road construction and maintenance equipment - Bituminous binder spreaders/sprayers - Terminology and commercial specifications |
| BS ISO 15644-2002 |
道路建设和维修设备. 碎片摊铺机.术语和商业规范 |
Road construction and maintenance equipment - Chippings spreaders - Terminology and commercial specifications |
| BS ISO 15645-2002 |
道路建设和维修设备.道路压碾机.术语和商业规范 |
Road construction and maintenance equipment - Road milling machinery - Terminology and commercial specifications |
| BS ISO 15648-2004 |
黄油.盐含量的测定.电势滴定法 |
|
| BS ISO 15649-2001 |
石油和天然气工业.管道 |
Petroleum and natural gas industries - Piping |
| BS ISO 15663-1-2001 |
石油和天然气工业.寿命周期成本.方法学 |
Petroleum and natural gas industries - Life cycle costing - Methodology |
| BS ISO 15663-2-2001 |
石油和天然气工业.寿命周期成本.方法论的应用和计算方法指南 |
Petroleum and natural gas industries - Life cycle costing - Guidance on application of methodology and calculation methods |
| BS ISO 15663-3-2001 |
石油和天然气工业.生命周期成本.实施导则 |
(Petroleum and natural gas industries - Life cycle costing - Implementation guidelines) |
| BS ISO 15664-2001 |
声学.露天设备噪声控制设计程序 |
Acoustics - Noise control design procedures for open plant |
| BS ISO 15665-2003 |
声学.管、阀和法兰隔声 |
(Acoustics - Acoustic insulation for pipes, valves and flanges) |
| BS ISO 15668-2000 |
银行业务.安全文件传输(零售) |
Banking - Secure file transfer (retail) |
| BS ISO 15671-2000 |
橡胶和橡胶添加剂.使用自动分析仪测定总硫含量 |
Rubber and rubber additives - Determination of total sulfur content using an automatic analyser |
| BS ISO 15672-2000 |
橡胶和橡胶添加剂.使用自动分析仪测定总氮含量 |
Rubber and rubber additives - Determination of total nitrogen content using an automatic analyser |
| BS ISO 15674-2001 |
心脏脉管植入物和人工器官.硬壳式心脏/静脉存储系统(有/无过滤器)和软静脉储血袋 |
Cardiovascular implants and artificial organs - Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags |
| BS ISO 15675-2001 |
心脏脉管和人工器官.心脉旁通系统.动脉血过滤器 |
Cardiovascular implants and artificial organs - Cardiopulmonary bypass systems - Arterial line blood filters |
| BS ISO 15681-1-2004 |
水质.用流量分析法(FIA and CFA)测定正磷酸盐和磷总含量.流量注入分析法(FIA) |
|
| BS ISO 15681-2-2004 |
水质.用流量分析法(FIA and CFA)测定正磷酸盐和磷总含量.连续流量分析法(CFA) |
|
| BS ISO 15682-2000 |
水质.流量分析(CFA和FIA)和光度测量或电位检测法测定氯化物 |
Water quality. Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection |
| BS ISO 15686-1-2000 |
建筑物和施工资产.使用寿命计划.一般原理 |
Buildings and constructed assets - Service life planning - General principles |
| BS ISO 15686-2-2001 |
建筑物和施工资产.使用寿命计划.使用寿命预测程序 |
Buildings and constructed assets - Service life planning - Service life prediction procedures |
| BS ISO 15686-3-2002 |
建筑物和施工资产.使用寿命计划.性能审核和评论 |
Buildings and constructed assets - Service life planning - Performance audits and reviews |
| BS ISO 15686-6-2004 |
建筑物和施工资产.使用寿命计划.考虑环境效应的规程 |
|
| BS ISO 15705-2002 |
水质.化学需氧量的测定(ST-COD).小型密封管法 |
Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed-tube method |
| BS ISO 15706-2002 |
信息和文献工作.国际标准视听数码(ISAN) |
Information and documentation - International Standard Audiovisual Number (ISAN) |
| BS ISO 15707-2001 |
信息和文献工作.国际标准音乐管理代码(ISWC) |
Information and documentation - International standard musical work code (ISWC) |
| BS ISO 15710-2002 |
涂料和清漆.浸渍在缓冲氯化钠溶液中和在该溶液中去除的腐蚀试验试 |
Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution |
| BS ISO 15715-2003 |
色漆和清漆用粘合剂.混浊度的测定 |
(Binders for paints and varnishes - Determination of turbidity) |
| BS ISO 15724-2001 |
金属和其它无机覆层.钢中可扩散氢的电化学测量.Barnacle电极法 |
Metallic and other inorganic coatings - Electrochemical measurement of diffusible hydrogen in steels - Barnacle electrode method |
| BS ISO 15730-2001 |
金属和其他无机涂层.用电抛光精加工和钝化不锈钢 |
Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel |
| BS ISO 15734-2003 |
船舶和海上技术.静水压力释放装置 |
(Ships and marine technology - Hydrostatic release units) |
| BS ISO 15738-2002 |
船舶与海上技术.充气救生装置用充气系统 |
Ships and marine technology - Gas inflation systems for inflatable life-saving appliances |
| BS ISO 15739-2003 |
摄影.电子静物摄影成像.噪音测量 |
(Photography - Electronic still-picture imaging - Noise measurements) |
| BS ISO 15741-2002 |
涂料和清漆.水上和水下无腐蚀气体管道内侧的减小摩擦涂层 |
Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases |
| BS ISO 15750-1-2002 |
包装.钢筒.最小总容量为 208 升、 210 升和216.5 升的敞口柱筒(盖可拆下) |
(Packaging - Steel drums - Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l) |
| BS ISO 15750-2-2002 |
包装.钢筒.最小总容量为 212升、216,5 升和 230 升的密封盖圆筒 |
(Packaging - Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 121 l, 216,5 l and 230 l) |
| BS ISO 15752-2001 |
眼科仪器.眼内照明装置.光辐射安全的基本要求和试验方法 |
Ophthalmic instruments - Endoilluminators - Fundamental requirements and test methods for optical radiation safety |
| BS ISO 15767-2003 |
工作场所大气.对采集的气溶胶称重时产生的控制和特征误差 |
(Workplace atmospheres - Controlling and characterizing errors in weighing collected aerosols) |
| BS ISO 15790-2005 |
图形技术和摄影.反射和传输计量学用认证的标准物质.包括组合标准不确定度测定在内的使用文档和规程 |
|
| BS ISO 15791-1-2003 |
塑料.塑料产品用中等规模燃烧试验的设计和应用.通用指南 |
(Plastics - Development and use of intermediate-scale fire tests for plastics products - General guidance) |
| BS ISO 15794-2001 |
双向和多向叉车卡车.稳定性试验 |
Bi-directional and multi-directional fork-lift trucks - Stability tests |
| BS ISO 15796-2005 |
气体分析.分析偏差的调查和处理 |
|
| BS ISO 15797-2002 |
纺织品.工作服检测用工业洗涤和整理规程 |
Textiles - Industrial washing and finishing procedures for testing of workwear |
| BS ISO 15799-2003 |
土壤质量.土壤和土壤物质的生态毒性表征指南 |
(Soil quality - Guidance on the ecotoxicological characterization of soils and soil materials) |
| BS ISO 15825-2004 |
橡胶配合材料.炭黑.用盘式离心沉淀摄影法测定集料粒度分布 |
|
| BS ISO 15828-2004 |
道路车辆.车前斜撞试验规程 |
|
| BS ISO 15836-2003 |
信息和文献工作.都柏林核心数据素集 |
(Information and documentation - The Dublin Core metadata element set) |
| BS ISO 15838-2004 |
船舶与海上技术.管道设施中使用的带密封衬垫的机械耦合配件.性能规范 |
|
| BS ISO 15838-2004 |
船舶与海上技术.管道设施中使用的有垫圈机械连接配件.性能规范 |
|
| BS ISO 15839-2004 |
水质.水用联机传感器/分析设备.规范和性能试验 |
|
| BS ISO 15839-2004 |
水质.水用联机传感器/分析设备.规范和性能试验 |
|
| BS ISO 15849-2001 |
船舶和航海技术.船队管理系统网络的实施导则 |
Ships and marine technology - Guidelines for implementation of a fleet management system network |
| BS ISO 15850-2002 |
塑料.测定拉伸-拉伸疲劳断裂延伸度.线性弹力断裂机械(LEFM)试验方法 |
Plastics - Determination of tension-tension fatigue crack propagation - Linear elastic fracture mechanics (LEFM) approach |
| BS ISO 15859-1-2004 |
航天系统.液体性能.抽样和试验方法.氧 |
|
| BS ISO 15859-10-2004 |
航天系统.液体性能.抽样和试验方法.水 |
|
| BS ISO 15859-11-2004 |
航天系统.液体性能.抽样和试验方法.氨 |
|
| BS ISO 15859-12-2004 |
航天系统.液体性能.抽样和试验方法.二氧化碳 |
|
| BS ISO 15859-13-2004 |
航天系统.液体性能.抽样和试验方法.呼吸气体 |
|
| BS ISO 15859-2-2004 |
航天系统.液体性能.抽样和试验方法.氢 |
|
| BS ISO 15859-3-2004 |
航天系统.液体性能.抽样和试验方法.氮 |
|
| BS ISO 15859-4-2004 |
航天系统.液体性能.抽样和试验方法.氦 |
|
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com