标准号 |
中文名称 |
英文名称 |
BS EN 26891-1991 |
木结构.机械紧固件接头.强度和变形特性测定的一般原则 |
(Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics) |
BS EN 269-1995 |
呼吸保护装置.包括护罩的动力推动新鲜空气软管呼吸装置规范 |
(Respiratory protective devices - Specification for powered fresh air hose breathing apparatus incorporating a hood) |
BS EN 26922-1989 |
粘合剂.对接头抗拉强度的测定 |
(Adhesives - Determination of tensile strength of butt joints) |
BS EN 26927-1991 |
房屋建造.勾缝用品.密封剂.词汇 |
(Building construction - Jointing products - Sealants - Vocabulary) |
BS EN 2693-1994 |
铝合金.AL-P5086-H111.0.3-6mm的薄板和带材 |
(Aluminium alloy - AL-P5086-H111 - Sheet and strip 0,3 mm) |
BS EN 2693-2005 |
航空航天系列.AL-P5086-H111铝合金.0.3mm≤a≤6mm 薄板和带材 |
|
BS EN 2694-1994 |
铝合金.AL-P6061-T6或T62.宽0.4-6mm的薄板和带材 |
(Aluminium alloy - AL-P6061-T6 or T62 - Sheet and strip 0,4 mm) |
BS EN 2694-2005 |
航空航天系列.AL-P6061-T6或T62铝合金.0.4mm≤a≤6mm 薄板和带材 |
|
BS EN 26948-1991 |
自动汽水分离器生产和性能试验规范 |
(Specification for production and performance characteristic tests for automatic steam traps) |
BS EN 2695-1994 |
铝合金.AL-P6081-T6.0.3mm≤a≤6mm的板材和带材 |
(Aluminium alloy - AL-P6081-T6 - Sheet and strip 0,3 mm) |
BS EN 2695-2005 |
航空航天系列.AL-P6081-T6铝合金.0.3mm≤a≤6mm薄板和带材 |
|
BS EN 2696-1994 |
铝合金.AL-P7075-T6或T62.0.4mm≤a≤6mm的板材和带材 |
(Aluminium alloy - AL-P7075-T6 or T62 - Sheet and strip 0,4 mm) |
BS EN 2696-2005 |
航空航天系列.AL-P7075-T6或T62铝合金.0.4mm≤a≤6mm 薄板和带材 |
|
BS EN 270-1995 |
呼吸保护装置.包括防护罩的压缩空气导管呼吸装置.要求、试验和标志 |
(Respiratory protective devices - Compressed air line breathing apparatus incorporating a hood - Requirements, testing, marking) |
BS EN 27023-1993 |
包装袋.检验用空袋取样方法 |
(Packaging - Sacks - Method of sampling empty sacks for testing) |
BS EN 271-1995 |
呼吸保护设备.喷砂操作用包括防护罩的压缩空气导管呼吸装置或动力推动新鲜空气软管呼吸装置.要求、检验和标 |
(Respiratory protective devices - Compressed air line or powered fresh air hose breathing apparatus incorporating a hood for use in abrasive blasting operations - Requirements, testing, marking) |
BS EN 27201-1-1990 |
防火.灭火介质.卤代烃.聚四氟乙烯1211和1301的规范 |
(Fire protection - Fire extinguishing media - Halogenated hydrocarbons - Specifications for halon 1211 and halon 1301) |
BS EN 27201-2-1994 |
防火.灭火用介质.卤化烃.安全装卸和运输过程的实施规范 |
(Fire protection - Fire extinguishing media - Halogenated hydrocarbons - Code of practice for safe handling and transfer procedures) |
BS EN 27213-1982 |
试验用纸浆取样的方法 |
(Method for sampling pulps for testing) |
BS EN 27243-1994 |
热环境.根据湿球玻璃温度计指示数对操作人员热影响的估算 |
(Hot environments - Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)) |
BS EN 27286-1992 |
电阻焊设备用图形符号 |
(Graphical symbols for resistance welding equipment) |
BS EN 273-1992 |
木材防腐剂.对竹粉蠹虫预防作用的测定(实验室法) |
(Wood preservatives - Determination of the curative action against Lyctus brunneus (Stephens) (laboratory method)) |
BS EN 27326-1991 |
橡胶和塑料软管.静态条件下耐臭氧性的评定 |
(Rubber and plastics hoses - Assessment of ozone resistance under static conditions) |
BS EN 27372-1992 |
商贸数据交换.商贸数据指南 |
(Trade data interchange - Trade data elements directory) |
BS EN 27390-1991 |
房层建筑.连接件.耐变形性的测定 |
(Building construction - Jointing products - Determination of resistance to flow) |
BS EN 274-1-2002 |
卫生器具用下水道管件要求 |
(Waste fitting for sanitary appliances - Requirements) |
BS EN 274-2-2002 |
卫生器具用下水道管件的试验方法 |
(Waste fitting for sanitary appliances - Test methods) |
BS EN 274-3-2002 |
卫生器具用下水道管件的质量控制 |
(Waste fitting for sanitary appliances - Quality control) |
BS EN 2743-2002 |
航空航天系列.纤维增强塑料.未老化材料测试前整理的标准程序 |
(Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials) |
BS EN 27434-1992 |
一字槽锥端紧定螺钉 |
(Slotted set screws with cone point) |
BS EN 27435-1992 |
一字槽长圆柱端紧定螺钉 |
(Slotted set screws with long dog point) |
BS EN 27436-1992 |
一字槽凹端紧定螺钉 |
(Slotted set screws with cup point) |
BS EN 2744-1992 |
非金属材料.优选的试验温度 |
(Non-metallic materials - Preferred test temperatures) |
BS EN 2746-1998 |
玻璃纤维增强塑料.弯曲试验.三点弯曲法 |
(Glass fibre reinforced plastics - Flexural test - Three point bend method) |
BS EN 2747-1998 |
玻璃纤维增强塑料.抗拉试验 |
(Glass fibre reinforced plastics - Tensile test) |
BS EN 275-1992 |
木材防腐剂.抗水蛀木虫防护能力的测定 |
(Wood preservatives - Determination of the protective effectiveness against marine borers) |
BS EN 2752-1990 |
带镗孔缩径系列自锁固定双耳系紧螺母的规范.等类:1100MPa/235℃ |
(Specification for nuts, anchor, self locking fixed, two lug, reduced series, with counterbore - Classification: 1100 MPa/235 鳦) |
BS EN 2753-1996 |
MoS2润滑的镀镉合金钢制单耳有镗孔自锁固定系紧螺母.等级:1100MPa(室温)/235℃ |
(Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoSDOWN2 lubricated - Classification - 1100 MPa (at ambient temperature) / 235 鳦) |
BS EN 27627-1-1993 |
硬质金属.火焰原子吸收光谱法化学分析.第1部分:一般要求 |
(Hardmetals - Chemical analysis by flame atomic absorption spectrometry - General requirements) |
BS EN 27627-2-1993 |
硬质金属.用火焰原子吸收光谱法进行化学分析.第2部分:0.001-0.02%(m/m)含量钙、钾、镁和钠测定 |
(Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m)) |
BS EN 27627-3-1993 |
硬质金属.用火焰原子吸收光谱法进行化学分析.第3部分:0.01-0.5%(m/m)钴、铁、锰和镍的测定 |
(Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m)) |
BS EN 27627-4-1993 |
硬质金属.用火焰原子吸收光谱法进行化学分析.第4部分:0.01-0.5%(m/m)含量钼、钛和钒的测定 |
(Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m)) |
BS EN 27627-5-1993 |
硬质金属.用火焰原子吸收光谱法进行化学分析.第5部分:0.5-2%(m/m)含量钴、铁、钼、镍、钛和钒的测定 |
(Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m)) |
BS EN 27627-6-1993 |
硬质金属.用火焰原子吸收光谱法进行化学分析.第6部分:0.01-2.0%(m/m)铬含量的测定 |
(Hardmetals - Chemical analysis by flame atomic absorption spectrometry - Determination of chromium in contents 0,01 to 2 % (m/m)) |
BS EN 277-1996 |
食品运输袋.聚炳烯织物袋 |
(Sacks for the transport of food aid - Sacks made of woven polypropylene fabric) |
BS EN 27721-1992 |
沉头螺钉的头形和测量 |
(Countersunk head screws - Head configuration and gauging) |
BS EN 27740-1992 |
带可拆卸刀片的外科手术刀尺寸规范 |
(Specification for dimensions of surgical scalpels with detatchable blades) |
BS EN 27787-3-1992 |
牙科用旋转器械.切割工具.第3部分:铣床用硬质合金刀具 |
(Specification for dental rotary instruments - Cutters - Carbide laboratory cutters for milling machines) |
BS EN 278-1991 |
采用压力达200毫巴可燃气体的家用器具膜片用橡胶材料规范 |
(Specification for rubber materials for diaphragms in domestic appliances using combustible gases up to 200 mbar) |
BS EN 2781-1998 |
非金属材料.结构胶粘剂.试验方法.初始厚度的测定 |
(Non-metallic materials - Structural adhesives - Test methods - Determination of the primer thickness) |
BS EN 27828-1985 |
水质.生物取样法.水生海底大型无脊椎动物手网取样指南 |
(Water quality - Methods for biological testing - Methods of biological sampling: guidance on handnet sampling of aquatic benthic macro-invertebrates) |
BS EN 27841-1991 |
自动汽水分离器蒸汽损失的测定方法 |
(Methods for determination of steam loss of automatic steam traps) |
BS EN 27842-1991 |
自动汽水分离器排放量的测定方法 |
(Methods for determination of discharge capacity of automatic steam traps) |
BS EN 27888-1993 |
水质.电导率测定方法 |
(Water quality - Method for the determination of electrical conductivity) |
BS EN 279-1991 |
采用压力达200毫巴可燃气体的家用器具静态密封用均质橡胶材料规范 |
(Specification for homogenous rubber materials for dynamic seals in domestic appliances using combustible gases up to 200 mbar) |
BS EN 2790-1991 |
带自润滑套和啮合量为1.5双螺纹PH1的螺纹轴的自动调节滑动轴承连杆可调端头.尺寸和负载 |
(Rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank with engagement: 1.5 thread - Dimensions and loads) |
BS EN 2791-1991 |
啮合量为1.5(双)螺纹直径的单叉螺纹轴可调连杆端头.尺寸和负载 |
(Rod ends, adjustable, single fork and threaded shank with engagement: 1.5 thread diameter - Dimensions and loads) |
BS EN 2792-1991 |
啮合量为1.5 |
(Rod ends, adjustable, double fork and threaded shank with engagement: 1.5 thread diameter - Dimensions and loads) |
BS EN 27931-1992 |
电阻焊设备的绝缘帽和套规范 |
(Specification for insulation caps and bushes for resistance welding equipment) |
BS EN 2794-003-1999 |
温度补偿的额定电流为20A至50A的单极电路断路器.米制螺纹终端.产品标准 |
(Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. Metric thread terminals - Product standard) |
BS EN 2794-004-1999 |
温度补偿的额定电流为20A至50A的单极电路断路器.UNC螺纹终端.产品标准 |
(Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. UNC thread terminals - Product standard) |
BS EN 27941-1994 |
石油及其产品的试验方法.商用丙烷和丁烷.气相色谱分析 |
(Methods of test for petroleum and its products - Commercial propane and butane - Analysis by gas chromatography) |
BS EN 27963-1992 |
超声波焊缝探伤用2号校验块规范 |
(Specification for calibration block No. 2 for ultrasonic examination of welds) |
BS EN 27965-1-1993 |
包装袋.第1部分:坠落试验.纸袋 |
(Packaging - Sacks - Drop test - Paper sacks) |
BS EN 280-2001 |
移动提升工作台.设计计算.稳定性标准.建造.安全.检验和试验 |
(Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests) |
BS EN 28029-1987 |
塑料软管.织物增强的通用可拆卸水管规范 |
(Plastics hose - General purpose collapsible water hose, textile reinforced - Specification) |
BS EN 28033-1992 |
橡胶和塑料软管.零件间粘着力的测定 |
(Rubber and plastics hose - Determination of adhesion between components) |
BS EN 28049-1992 |
镍铁弹丸.抽样分析 |
(Ferronickel shot - Sampling for analysis) |
BS EN 28050-1992 |
镍铁块或片.抽样分析 |
(Ferronickel ingots or pieces - Sampling for analysis) |
BS EN 28064-1989 |
信息处理.宽12.7mm(0.5in)的磁带卷盘.规格16、18和22 |
(Information processing - Reels for 12,7 mm (0,5 in) wide magnetic tapes - Sizes 16, 18 and 22) |
BS EN 2808-1997 |
钛和钛合金阳极氧化 |
(Anodizing of titanium and titanium alloys) |
BS EN 2809-2001 |
航空航天系列.螺母.六角形.槽头/齿形紧固件,高度降低,常规交叉形,耐热钢,镀银的紧固件,分级.900MPa |
(Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated - Classification - 900 MPa (at ambient temperature)/650 鳦) |
BS EN 28094-1994 |
输送机用钢丝帘布输送带.涂覆到夹芯层的粘附强度试验 |
(Steel cord conveyor belts - Adhesion strength test of the cover to the core layer) |
BS EN 2810-2001 |
航空航天系列.钝化、耐热钢制、标准对边、高度降低的槽头/齿形头六角螺母.等级:900MPa(室温)/650℃ |
(Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature)/650 鳦) |
BS EN 28167-1992 |
电阻焊的凸出部位规范 |
(Specification for projections for resistance welding) |
BS EN 28187-1992 |
家用冷藏冷冻设备.冷藏冷冻箱.性能和试验方法 |
(Household refrigerating appliances - Refrigerator-freezers - Characteristics and test methods) |
BS EN 282-1997 |
雪崩警告.发送/接收系统.安全要求和试验 |
(Avalanche beacons - Transmitter/receiver systems - Safety requirements and testing) |
BS EN 28206-1992 |
氧气切割机的验收试验.可复现准确度.操作特性 |
(Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics) |
BS EN 28233-1992 |
热塑性塑料阀门的扭矩试验方法 |
(Thermoplastics valves - Torque - Test method) |
BS EN 28265-1989 |
水质.为浅淡水中多石底层上的水底大无脊椎动物而设计和使用定量取样器 |
(Water quality - Biological methods - Methods of biological sampling: guidance on the design and use of quantitative samplers for benthic macro-invertebrates on stony substrata in shallow freshwater) |
BS EN 2828-1993 |
抛光金属涂层的粘结性试验 |
Adhesion test for metallic coatings by burnishing |
BS EN 2829-1995 |
用喷丸加工法做金属覆层的附着力试验 |
(Adhesion test for metallic coatings by shot peening) |
BS EN 283-1991 |
交换体.试验 |
(Swap bodies - Testing) |
BS EN 2830-1993 |
用剪切法对金属镀层的附着试验 |
(Adhesion test for metallic coatings by shearing action) |
BS EN 2831-1993 |
钢的氢脆性.慢速弯曲试验 |
(Hydrogen embrittlement of steels - Test by slow bending) |
BS EN 28317-1993 |
防儿童拆卸的包装.可重复使用包装件的要求和试验程序 |
(Child-resistant packaging - Requirements and testing procedures for reclosable packages) |
BS EN 2832-1993 |
钢的氢脆性.V切口试件试验 |
Hydrogen embrittlement of steels - Notched specimen test |
BS EN 28339-1991 |
房层建筑.连接件.密封剂.抗拉特性的测定 |
Building construction - Jointing products - Sealants - Determination of tensile properties |
BS EN 28340-1991 |
房层建筑.连接件.保持延伸条件下抗拉特性的测定 |
Building construction - Jointing products - Sealants - Determination of tensile properties at maintained extension |
BS EN 28362-1-1993 |
注射容器及附件.第1部分:玻璃管注射瓶 |
(Injection containers for injectables and accessories - Injection vials made of glass tubing) |
BS EN 28362-2-1993 |
注射容器及附件.第2部分:注射瓶的封口 |
(Injection containers for injectables and accessories - Closures for injection vials) |
BS EN 28362-4-1993 |
注射容器及附件.第4部分:模制玻璃制的注射瓶 |
(Injection containers for injectables and accessories - Injection vials made of moulded glass) |
BS EN 28394-1991 |
房层建筑.连接件.单组分密封剂可挤压性的测定 |
(Building construction - Jointing products - Determination of extrudability of one-component sealants) |
BS EN 284-1992 |
交换体.C级交换体.尺寸和一般要求 |
(Swap bodies - Swap bodies of class C. Dimensions and general requirements) |
BS EN 28430-1-1992 |
点焊.电极夹具.第1部分:锥形接头锥度1:10 |
(Specification for resistance spot welding - Electrode holders - Taper fixing 1:10) |
BS EN 28430-2-1992 |
点焊.电极夹具.第2部分:莫氏锥形接头 |
(Specification for resistance spot welding - Electrode holders - Morse taper fixing) |
BS EN 28430-3-1992 |
点焊.电极夹具.第3部分:端推力直柄接头 |
(Specification for resistance spot welding - Electrode holders - Parallel shank fixing for end thrust) |
BS EN 28474-1987 |
满包运输包装件.耐浸水的性能测定方法 |
(Complete, filled transport packages - Method for determination of resistance to immersion in water) |
BS EN 285-1997 |
清毒.蒸汽消毒器.大型消毒器 |
(Sterilization - Steam sterilizers - Large sterilizers) |
BS EN 2851-1992 |
除发动机外的零部件和组件的标志.图纸上表示 |
(Marking of parts and assemblies other than engines - Indications on drawings) |
BS EN 28510-1-1991 |
胶粘剂.软料与硬料粘合试样组件剥离试验.90°剥离 |
(Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - 90 ?Peel) |
BS EN 28510-2-1991 |
胶粘剂.软料与硬料粘合试样组件剥离试验.180°剥离 |
(Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Adhesives - Peel test for a flexible-bonded to-rigid test specimen assembly - 180 ?Peel) |
BS EN 2858-1-1994 |
钛和钛合金锻坯和锻件技术规范.第1部分:一般要求 |
(Titanium and titanium alloys - Forging stock and forgings - Technical specifications - General requirements) |
BS EN 2858-2-1994 |
钛和钛合金锻坯和锻件技术规范.第2部分:锻坯 |
(Titanium and titanium alloys - Forging stock and forgings - Technical specification - Forging stock) |
BS EN 2858-3-1994 |
钛和钛合金锻坯和锻件技术规范.第3部分:预行生产锻件和生产锻件 |
(Titanium and titanium alloys - Forging stock and forgings - Technical specifications - Pre-production and production forgings) |
BS EN 2859-1995 |
镀镉合金钢制标准六角头紧公差标准柄短螺纹螺栓.等级:1100MPa(室温)/235℃ |
(Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 鳦) |
BS EN 286-1-1998 |
专用于空气或氮气的简单非受火压力容器.一般用途压力容器 |
Simple unfired pressure vessels designed to contain air or nitrogen - Pressure vessels for general purposes |
BS EN 286-2-1992 |
装空气或氮气用简单不用火加热的压力容器.汽车和拖车气动刹车和辅助系统用压力容器规范 |
(Simple unfired pressure vessels designed to contain air or nitrogen - Specification for pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers) |
BS EN 286-3-1995 |
装空气或氮气用的不近火的一般压力容器.第3部分:用于铁路运输车辆空气制动和辅助气动设备的钢制压力容器 |
(Simple unfired pressure vessels designed to contain air or nitrogen - Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock) |
BS EN 286-4-1995 |
装空气或氮气用的不近火的一般压力容器.第4部分:用于铁路运输车辆空气制动和辅助气动设备的铝合金压力容器 |
(Simple unfired pressure vessels designed to contain air or nitrogen - Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock) |
BS EN 28601-1989 |
信息交换中日期和时间表示规范 |
(Specification for representation of dates and times in information interchange) |
BS EN 28630-1-1988 |
使用13262次磁通变换/弧度在每侧80磁道上调频录制的数据交换用130mm(5.25in)盒式软磁盘的制作和使用指南.尺 |
(Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 13 262 ftprad, on 80 tracks each side - Dimensional, p) |
BS EN 28630-2-1988 |
使用13262次磁通变换/弧度在每侧80磁道上调频录制的数据交换130mm(5.25in)盒式软磁盘的制作和使用指南.77磁 |
(Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 13 262 ftprad, on 80 tracks each side - Track format A) |
BS EN 28630-3-1988 |
使用13262次磁通变换/弧度在每侧80磁道上调频录制的数据交换130mm(5.25in)盒式软磁盘的制作和使用指南.80磁 |
(Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 13 262 ftprad, on 80 tracks each side - Track format B) |
BS EN 28653-1993 |
珠宝.戒指尺寸.定义.测量和命名 |
(Jewellery - Ring-sizes - Definition, measurement and designation) |
BS EN 28654-1993 |
金合金的颜色.颜色和命名的定义和范围 |
(Colours of gold alloys - Definition, range of colours and designation) |
BS EN 28659-1992 |
热塑性塑料阀门.疲劳强度.试验方法 |
(Thermoplastics valves - Fatigue strength - Test method) |
BS EN 28662-1-1993 |
手持式便携电动工具.手柄振动测量.总则 |
(Hand-held portable power tools - Measurement of vibrations at the handle - General) |
BS EN 28662-2-1995 |
手持便携电动工具.手柄振动测量.凿锤和铆锤 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Chipping hammers and riveting hammers) |
BS EN 28662-3-1995 |
手持便携电动工具.手柄振动测量.岩石钻和旋转锤头 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Rock drills and rotary hammers) |