标准号 |
中文名称 |
英文名称 |
| BS ISO 1268-11-2005 |
纤维增强塑料.试验板的生产方法.BMC和其他长纤维化合物的注射模塑法.小型试验板 |
|
| BS ISO 1268-2-2001 |
纤维增强塑料.试验板的生产方法.接触模压法和喷射成形法 |
Fibre-reinforced plastics - Methods of producing test plates - Contact and spray-up moulding |
| BS ISO 1268-3-2001 |
纤维增强塑料.试验板的生产方法.湿压缩模塑法 |
Fibre-reinforced plastics - Methods of producing test plates - Wet compression moulding |
| BS ISO 1268-5-2001 |
纤维增强塑料.试验板的生产方法.长纤维缠绕 |
Fibre-reinforced plastics - Methods of producing test plates - Filament winding |
| BS ISO 1268-7-2001 |
纤维增强塑料.试验板的生产方法.树脂转换模塑法 |
Fibre-reinforced plastics - Methods of producing test plates - Resin transfer moulding |
| BS ISO 1268-8-2004 |
纤维增强塑料.试验板的生产方法.SMC和BMC压模 |
|
| BS ISO 1268-9-2003 |
纤维增强塑料.试验板的生产方法.GMT/STC的模制 |
(Fibre-reinforced plastics - Methods of producing test plates - Moulding of GMT/STC) |
| BS ISO 12686-2000 |
金属和其他无机覆层.镍、自催化镍或铬镀敷或精整加工前用金属物质的自动控制喷丸处理 |
Metallic and other inorganic coatings - Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish |
| BS ISO 1271-2001 |
香精油.羰基值的测定.自由羟氨法 |
Essential oils - Determination of carbonyl value - Free hydroxylamine method |
| BS ISO 1272-2001 |
香精油.酚类含量的测定 |
Essential oils - Determination of content of phenols |
| BS ISO 1275-1995 |
传动和输送机用双节距的精密辊链和链轮 |
Double-pitch precision roller chains and sprockets for transmission and conveyors |
| BS ISO 12771-1997 |
塑料实验室器皿.可处置血清移液管 |
Plastics laboratory ware - Disposable serological pipettes |
| BS ISO 12772-1997 |
实验室玻璃器皿.可处置微血球容积计毛细管 |
Laboratory glassware - Disposable microhaematocrit capillary tubes |
| BS ISO 12775-1998 |
额定散装玻璃产品的复合材料及其试验方法导则 |
Guidelines on types of glass of normal bulk-production composition and their test methods |
| BS ISO 12789-2001 |
标准中子射线.模拟工作地点中子场产生的特性和方法 |
Reference neutron radiations - Characteristics and methods of production of simulated workplace neutron fields |
| BS ISO 1279-2001 |
香精油.羰基值的测定.氯化羟铵电势计法 |
Essential oils - Determination of carbonyl value - Potentiometric methods using hydroxylammonium chloride |
| BS ISO 12794-2000 |
核能.辐射防护.四肢和眼用单独热致发光剂量计 |
Nuclear energy - Radiation protection - Individual thermoluminescence dosemeters for extremities and eyes |
| BS ISO 128-20-2000 |
技术图纸.表示的一般原则.直线的基本规定 |
Technical drawings - General principles of presentation - Basic conventions for lines |
| BS ISO 128-21-2000 |
技术图纸.表示的一般原则.用计算机辅助设计(CAD)系统对直线的准备 |
Technical drawings - General principles of presentation - Preparation of lines by CAD systems |
| BS ISO 128-22-2000 |
技术图纸.表示的一般原则.画标题线和参考线的一般习惯和应用 |
Technical drawings - General principles of presentation - Basic conventions and applications for leader lines and reference lines |
| BS ISO 128-23-1999 |
技术制图.绘制的一般原理.结构绘图线 |
Technical drawings - General principles of presentation - Lines on construction drawings |
| BS ISO 128-24-2000 |
技术图纸.表示的一般原则.机械工程制图线 |
Technical drawings - General principles of presentation - Lines on mechanical engineering drawings |
| BS ISO 128-25-2000 |
技术图纸.表示的一般原则.造船绘图线 |
Technical drawings - General principles of presentation - Lines on shipbuilding drawings |
| BS ISO 128-30-2001 |
技术制图.表示的一般原则.基本惯例 |
Technical drawings - General principles of presentation - Basic conventions for views |
| BS ISO 128-34-2001 |
技术制图.表示的一般原则.机械工程图的视图 |
Technical drawings - General principles of presentation - Views on mechanical engineering drawings |
| BS ISO 128-40-2001 |
技术制图.表示的一般原则.切面和截面的一般换算 |
Technical drawings - General principles of presentation - Basic conventions for cuts and sections |
| BS ISO 128-44-2001 |
技术制图.表示的一般原则.机械工程制图部分 |
Technical drawings - General principles of presentation - Sections on mechanical engineering drawings |
| BS ISO 128-50-2001 |
技术制图.表示的一般原则.切图和截面图的表示区域的一般原理 |
Technical drawings - General principles of presentation - Basic conventions for representing areas on cuts and sections |
| BS ISO 129-1-2004 |
技术制图.尺寸和公差的表示.一般准则 |
|
| BS ISO 129-1-2004 |
技术制图.尺寸和公差的表示.一般准则 |
|
| BS ISO 129-2000 |
技术图纸.尺寸.一般原则、定义、标注方法和特殊画法 |
Technical drawings - Dimensioning - General principles, definitions, methods of execution and special indications |
| BS ISO 12917-1-2002 |
石油和液化石油产品.水平圆桶罐检测.手动法 |
Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Manual methods |
| BS ISO 12917-2-2002 |
石油和液化石油产品.水平圆桶罐检测.内光电距离测量法 |
Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Internal electro-optical distance-ranging method |
| BS ISO 12922-1999 |
润滑油,工业油和相干产品(L级).H族(液压系统).HFAE,HFAS,HFB,HFC,HFDR和HFDU类别规范 |
Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
| BS ISO 12925-1-1998 |
润滑剂,工业用油及有关(L类)产品.(齿轮)C种.第1部分:密封齿轮系统用润滑剂规范 |
Lubricants, industrial oils and related products (class L) - Family C (Gears) - Specifications for lubricants for enclosed gear systems |
| BS ISO 12965-2000 |
丁二烯橡胶.用红外线光谱法测定微观结构 |
Butadiene rubber - Determination of microstructure by infra-red spectrometry |
| BS ISO 12986-2-2005 |
铝生产用碳素材料.预焙阳极和阴极碳块.用四点法测定抗弯强度 |
|
| BS ISO 12986-2-2005 |
铝生产用碳素材料.预焙阳极和阴极碳块.用四点法测定抗弯强度 |
|
| BS ISO 12988-2-2004 |
铝生产用含碳材料.焙烧阳极.对二氧化碳反应性的测定.热解重量分析法 |
|
| BS ISO 12989-2-2005 |
铝生产用碳素材料.焙烧阳极和侧壁块.空气反应性的测定.热重分析法 |
|
| BS ISO 12992-1996 |
塑料制品.塑料薄膜和薄板垂直燃烧蔓延程序的测定 |
Plastics - Vertical flame spread determination for film and sheet |
| BS ISO 13003-2004 |
纤维增强塑料.循环载荷条件下疲劳性能的测定 |
|
| BS ISO 13012-1998 |
套筒型循环滚珠直线运动滚珠轴承.组件 |
Rolling bearings, linear motion, recirculating ball, sleeve type - Accessories |
| BS ISO 13041-1-2004 |
数控立式车床和旋转中心的试验条件.带水平工件夹紧主轴的机床的几何试验 |
|
| BS ISO 13041-4-2004 |
数控立式车床和旋转中心的试验条件.平直和旋转轴定位的精确性和反复性 |
|
| BS ISO 13041-6-2005 |
数控立式车床和转向中心的试验条件.试样成品的精确度 |
|
| BS ISO 13041-7-2004 |
数控立式车床和转向中心的试验条件.坐标平面上等高线特性评价 |
|
| BS ISO 13041-8-2004 |
数控立式车床和旋转中心的试验条件.热畸变的评价 |
|
| BS ISO 13050-2000 |
曲线齿状同步皮带驱动系统 |
Curvilinear toothed synchronous belt drive systems |
| BS ISO 132-1999 |
硫化或热塑性橡胶.弯曲断裂和断裂增长的测定(德.马蒂亚(DE MATTIA)法) |
Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia) |
| BS ISO 13202-2003 |
起重机.速度和时间参数的测量 |
(Cranes - Measurement of velocity and time parameters) |
| BS ISO 13215-2-1999 |
道路车辆.儿童限制器系统错用危险的减少.正确装配的要求和试验过程(面板法) |
Road vehicles - Reduction of misuse risk of child restraint systems - Requirements and test procedures for correct installation (panel method) |
| BS ISO 13215-3-1999 |
道路车辆.儿童固定系统错使用危险性的降低.用错使用模式和效果分析(MMEA)对错使用的预测和评估 |
Road vehicles - Reduction of misuse risk of child restraint systems - Prediction and assessment of misuse by misuse mode and effect analysis (MMEA) |
| BS ISO 13216-1-2000 |
道路车辆.儿童限制器系统用车辆锚具和锚具附件.座位弯曲锚具及附件 |
Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Seat bight anchorages and attachments |
| BS ISO 13216-2-2005 |
道路车辆.儿童约束系统在车内的固定点及主固定点的安装.顶部系留的固定点及其连接 |
|
| BS ISO 13218-1998 |
道路车辆.儿童保护系统.有儿童乘客的事故报告格式 |
Road vehicles - Child restraint systems - Report form for accidents involving child passengers |
| BS ISO 13226-2000 |
橡胶.液体对硫化橡胶影响的表征用标准参考弹性体(SREs) |
Rubber - Standard reference elastomers (SRE`s) for characterizing the effect of liquids on vulcanized rubbers |
| BS ISO 13284-2003 |
叉车.叉形臂扩展部分和能自由伸缩的叉形臂.技术特性和强度要求 |
(Fork-lift trucks - Fork-arm extensions and telescopic fork arms - Technical characteristics and strength requirements) |
| BS ISO 13296-1998 |
柴油发动机.高压燃料注射管道组件.常规要求和尺寸 |
Diesel engines - High pressure fuel injection pipe assemblies - General requirements and dimensions |
| BS ISO 13299-2003 |
感官分析.方法论.确立感觉检测形象的通用指南 |
(Sensory analysis - Methodology - General guidance for establishing a sensory profile) |
| BS ISO 13302-2003 |
感官分析.评定食品包装引起的味道改变的方法 |
(Sensory analysis - Methods for assessing modifications to the flavour of foodstuffs due to packaging) |
| BS ISO 13310-1997 |
铁矿.锌含量测定.火焰原子吸收光谱测定法 |
Iron ores - Determination of zinc content - Flame atomic absorption spectrometric method |
| BS ISO 13311-1997 |
铁矿.铅含量测定.火焰原子吸收光谱测定法 |
Iron ores - Determination of lead content - Flame atomic absorption spectrometric method |
| BS ISO 13312-1997 |
铁矿石.钾含量的测定.火焰原子吸收分光光度法 |
Iron ores - Determination of potassium content - Flame atomic absorption spectrometric method |
| BS ISO 13313-1997 |
铁矿石.钠含量的测定.火焰原子吸收分光光度法 |
Iron ores - Determination of sodium content - Flame atomic absorption spectrometric method |
| BS ISO 13317-1-2001 |
用重力液体沉淀法测定粒度分布.通用原则和导则 |
Determination of particle size distribution by gravitational liquid sedimentation methods - General principles and guidelines |
| BS ISO 13317-2-2001 |
用重力液体沉淀法测定粒度分布.固定移液管法 |
Determination of particle size distribution by gravitational liquid sedimentation methods - Fixed pipette method |
| BS ISO 13317-3-2001 |
用重力液体沉淀法测定粒度分布.X射线重力技术 |
Determination of particle size distribution by gravitational liquid sedimentation methods - X-ray gravitational technique |
| BS ISO 13318-1-2002 |
用离心液体沉淀法测定粒度分布.一般原则和导则 |
Determination of particle size distribution by centrifugal liquid sedimentation methods - General principles and guidelines |
| BS ISO 13318-2-2002 |
用离心力液体沉淀方法测定粒子分布尺寸.一般原则和导则.摄影离心法 |
Determination of particle size distribution by centrifugal liquid sedimentation methods - Photocentrifuge method |
| BS ISO 13318-3-2004 |
用离心液体沉淀法测定粒度分布.离心X射线法 |
|
| BS ISO 13319-2000 |
粒度分布的测定.电子感应区法 |
Determination of particle size distributions - Electrical sensing zone method |
| BS ISO 13320-1-2000 |
粒度分析.激光衍射方法.一般规则 |
Particle size analysis - Laser diffraction methods - General principles |
| BS ISO 13323-1-2002 |
粒径分布的测定.单粒子光干扰法.光干扰问题 |
Determination of particle size distribution - Single-particle light interaction methods - Light interaction considerations |
| BS ISO 13332-2001 |
往复式内燃机.在发动机底部测量的发自高速和中速往复式内燃机的结构噪声的试验规范 |
Reciprocating internal combustion engines - Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet |
| BS ISO 13344-1998 |
燃烧流出物致死毒性的测定 |
Determination of the lethal toxic potency of fire effluents |
| BS ISO 13347-1-2004 |
工业风扇.标准实验室条件下风扇声功率级的测定.总论 |
|
| BS ISO 13347-2-2004 |
工业风扇.标准实验室条件下风扇声功率级的测定.混响室法 |
|
| BS ISO 13347-3-2004 |
工业风扇.标准实验室条件下风扇声功率级的测定.包络面法 |
|
| BS ISO 13347-4-2004 |
工业用风扇.标准化实验室条件下风扇声功率级的测定.声强法 |
|
| BS ISO 13355-2002 |
包装.完全和满运输包装和成组装载.垂直随机振动试验 |
Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test |
| BS ISO 13357-1-2002 |
石油产品.润滑油可过滤性测定.水中过滤油的程序 |
Petroleum products - Determination of the filterability of lubricating oils - Procedure for oils in the presence of water |
| BS ISO 13359-1998 |
密封管道中传导性液体流量的测量.法兰电磁流量计.全长 |
Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length |
| BS ISO 13362-2001 |
挠性多孔聚合材料.潮湿条件下压缩永久变形的测定 |
Flexible cellular polymeric materials - Determination of compression set under humid conditions |
| BS ISO 13363-2004 |
船用发动机排湿系统用橡胶和塑料软管.规范 |
|
| BS ISO 13372-2004 |
机器的工况监测和诊断.词汇 |
|
| BS ISO 13373-1-2002 |
条件监测和机械诊断.振动条件监测.一般程序 |
Condition monitoring and diagnostics of machines - Vibration condition monitoring - General procedures |
| BS ISO 13374-1-2003 |
机械状态的监测和诊断.数据处理、通信和表示.一般指南 |
(Condition monitoring and diagnostics of machines - Data processing, communication and presentation - General guidelines) |
| BS ISO 13405-1-1997 |
修复和矫形外科学.修复部件的分类和描述.修复部件的分类 |
Prosthetics and orthotics - Classification and description of prosthetic components - Classification of prosthetic components |
| BS ISO 13405-2-1997 |
修复和矫形外科学.修复部件的分类和描述.下肢修复部件的描述 |
Prosthetics and orthotics - Classification and description of prosthetic components - Description of lower-limb prosthetic components |
| BS ISO 13405-3-1997 |
修复和矫形外科学.修复部件的分类和描述.上肢修复部件的描述 |
Prosthetics and orthotics - Classification and description of prosthetic components - Description of upper-limb prosthetic components |
| BS ISO 13419-2003 |
空间数据和信息传输系统.分包遥测 |
(Space data and information transfer systems - Packet telemetry) |
| BS ISO 13443-1997 |
天然气.标准参考条件 |
Natural gas - Standard reference conditions |
| BS ISO 13450-1996 |
摄影.110型暗盒、胶片和外皮纸尺寸 |
Photography - 110-size cartridge, film and backing paper - Dimensions |
| BS ISO 13463-1999 |
轻水反应堆MOX燃料生产用原子核级二氧化钚粉末.帮助定义产品规范的指南 |
Nuclear-grade plutonium dioxide powder for fabrication of light water reactor MOX fuel - Guidelines to help in the definition of a product specification |
| BS ISO 13468-2-1999 |
塑料.透明材料光透射率总量的测定.双束发射仪器 |
Plastics - Determination of the total luminous transmittance of transparent materials - Double-beam instrument |
| BS ISO 13472-1-2002 |
声学.在线测量道路表面的声吸收特性.延伸表面法 |
Acoustics - Measurement of sound absorption properties of road surfaces in situ - Extended surface method |
| BS ISO 13473-2-2002 |
表面轮廓用铺路材料构造的特性描述.有关铺路材料构造外观的基本要求术语 |
Characterization of pavement texture by use of surface profiles - Terminology and basic requirements related to pavement texture profile analysis |
| BS ISO 13473-3-2002 |
表面轮廓用铺路材料构造的特性描述.轮廓测定仪的规范和分类 |
Characterization of pavement texture by use of surface profiles - Specification and classification of profilometers |
| BS ISO 13475-1-2000 |
声学.室外用的固定音响警报装置.确定声音发射量的现场测量 |
Acoustics - Stationary audible warning devices used outdoors - Field measurements for determination of sound emission quantities |
| BS ISO 13476-1998 |
道路车辆.点火线圈.电气特性和试验方法 |
Road vehicles - Ignition coils - Electrical characteristics and test methods |
| BS ISO 13486-1-1999 |
道路车辆.液压制动系统.双喇叭管,螺纹孔,外螺纹配件和管座 |
Road vehicles - Hydraulic braking systems - Double-flare pipes, tapped holes, male fittings and tube seats |
| BS ISO 13491-1-1999 |
银行业务.安全密码装置(零售).第1部分:概念、要求和评估方法 |
Banking - Secure cryptographic devices (retail) - Concepts, requirements and evaluation methods |
| BS ISO 13491-2-2001 |
银行业务.安全密码装置(零售).磁条卡片系统用装置的安全合格清单 |
Banking - Secure cryptographic devices (retail) - Security compliance checklists for devices used in magnetic stripe cards systems |
| BS ISO 13492-1999 |
银行业务.相关数据素的键控管理(零售) |
Banking - Key management related data element (retail) |
| BS ISO 13503-1-2003 |
石油和天然气工业.完井液和材料.完井液粘性的测量 |
(Petroleum and natural gas industries - Completion fluids and materials - Measurement of viscous properties of completion fluids) |
| BS ISO 13542-1995 |
纸和纸板.卷筒芯的内径规范 |
Paper and board - Specification for internal diameters of cores for reels |
| BS ISO 13555-1-2003 |
柴油发动机.柴油喷注设备动态计时的检验规程.预调节 |
(Diesel engines - Procedure for checking the dynamic timing of diesel fuel injection equipment - Preconditioning) |
| BS ISO 13555-2-2003 |
柴油机.柴油机喷油系统动态定时的检验程序.试验方法 |
(Diesel engines - Procedure for checking the dynamic timing of diesel fuel injection equipment - Test method) |
| BS ISO 13555-3-2004 |
柴油发动机.柴油喷注设备动态计时的检验规程.定时测量设备的验证 |
|
| BS ISO 13556-1999 |
道路车辆.排气系统泄漏测定和设备规格 |
Road vehicles - Localization of exhaust system leaks and equipment specifications |
| BS ISO 13562-1-2001 |
工业用变距前伸式叉车.稳定性试验 |
Industrial variable-reach trucks - Stability tests |
| BS ISO 13562-2-2001 |
工业变速卡车.长度为6米和以上的卡车装载货物的运输稳定性试验 |
Industrial variable-reach trucks - Additional stability tests for trucks handling freight containers of length 6m and above |
| BS ISO 13563-1-2001 |
单侧负载叉车卡车.稳定试验 |
Single side loading fork-lift trucks - Stablity tests |
| BS ISO 13583-1-2001 |
离心铸造钢和合金制品.一般试验和公差 |
Centrifugally cast steel and alloy products - General testing and tolerances |
| BS ISO 13583-2-2003 |
离心铸造钢及合金产品.耐热材料 |
(Centrifugally cast steel and alloy products - Heat resistant materials) |
| BS ISO 13584-20-1998 |
工业自动化系统和集成电路.零部件数据库.逻辑源.表示式的逻辑模式 |
Industrial automation systems and integration - Parts library - Logical resource - Logical model of expressions |
| BS ISO 13584-42-1998 |
工业自动化系统和集成.零部件数据库.描述方法:组构零件系列的方法 |
Industrial automation systems and integration - Parts library - Description methodology: Methodology for structuring part families |
| BS ISO 13586-2000 |
塑料.断裂韧性的测定(G和K).线性弹性断裂力学(LEFM)法 |
Plastics - Determination of fracture toughness (GDOWNiDOWNc and KDOWNiDOWNc) - Linear elastic fracture mechanics (LEFM) approach |
| BS ISO 13591-1998 |
小型飞行器.舷外发动机用轻便型燃料系统 |
Small craft - Portable fuel systems for outboard motors |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com