标准号 |
中文名称 |
英文名称 |
BS 6955-13-1994 |
振动和冲击传感器的校正.基本应变灵敏度的试验方法 |
(Calibration of vibration and shock pick-ups - Method of test for base strain sensitivity) |
BS 6955-14-1994 |
振动和冲击传感器的校正.钢滑轮上的无衰减加速度计的共振频率的试验方法 |
(Calibration of vibration and shock pick-ups - Method of test for resonance frequency of undamped accelerometers on a steel block) |
BS 6955-15-1994 |
振动和冲击传感器的校正.声学灵敏度的试验方法 |
(Calibration of vibration and shock pick-ups - Method of test for acoustic sensitivity) |
BS 6955-16-1994 |
振动和冲击传感器的校正.安装扭矩灵敏度的试验方法 |
(Calibration of vibration and shock pick-ups - Method of test for mounting torque sensitivity) |
BS 6955-17-1994 |
振动和冲击传感器的校正.固定温度灵敏度的试验方法 |
(Calibration of vibration and shock pick-ups - Method of test for fixed temperature sensitivity) |
BS 6955-18-1994 |
振动和冲击传感器的校正.瞬变温度灵敏度的检测方法 |
(Calibration of vibration and shock pick-ups - Method of test for transient temperature sensitivity) |
BS 6955-19-1994 |
振动和冲击传感器的校正.磁场灵敏度的试验方法 |
(Calibration of vibration and shock pick-ups - Method of test for magnetic field sensitivity) |
BS 6955-1994 |
振动和冲击传感器的校正.磁场灵敏度的试验方法 |
(Calibration of vibration and shock pick-ups. Method of test for magnetic field sensitivity) |
BS 6955-2-1994 |
振动和冲击传感器的校正.主冲击的轻切校正法 |
(Calibration of vibration and shock pick-ups - Methods for primary shock calibration by light cutting) |
BS 6955-22-1997 |
振动和冲击拾音器的校正.加速度计共振试验.一般方法 |
(Calibration of vibration and shock pick-ups - Accelerometer resonance testing - General methods) |
BS 6955-4-1994 |
振动和冲击传感器的校正.二级冲击的校正法 |
(Calibration of vibration and shock pick-ups - Method for secondary shock calibration) |
BS 6955-5-1994 |
振动和冲击传感器的校正.地球引力引起的振动和冲击的校正法 |
(Calibration of vibration and shock pick-ups - Method for calibration by earth’s gravitation) |
BS 6955-6-1994 |
振动和冲击传感器的校正.一级振动的低频校正法 |
(Calibration of vibration and shock pick-ups - Method for primary vibration calibration at low frequencies) |
BS 6955-7-1994 |
振动和冲击传感器的校正.离心力引起的振动和冲击的初级校正方法 |
(Calibration of vibration and shock pick-ups - Methods for primary calibration by centrifuge) |
BS 6955-8-1994 |
振动和冲击传感器的校正.双离心力引起的振动和冲击的初级校正方法 |
(Calibration of vibration and shock pick-ups - Method for primary calibration by dual centrifuge) |
BS 6955-9-1994 |
振动和冲击传感器的校正.相角引起的二级振动的校正方法 |
(Calibration of vibration and shock pick-ups - Method for secondary vibration calibration by comparison of phase angles) |
BS 6956-1-1988 |
接合材料和化合物.波形金属接合环规范 |
(Jointing materials and compounds - Specification for corrugated metal joint rings) |
BS 6956-5-1992 |
接合材料和化合物.用于水、低压饱和蒸汽的接合材料和化合物规范.一类燃气(不包括煤气)和二类燃气 |
(Jointing materials and compounds - Specification for jointing compounds for use with water, low pressure saturated steam, 1st family gases (excluding coal gas) and 2nd family gases) |
BS 6958-1-1988 |
用改进的频率调制在每面80磁道上以7958磁通变换/弧度(ftprad)、5.3tpmm(135tpi)记录的数据交换用90mm(3.5in |
(Guide to construction and use of 90 mm (3.5 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 7958 ftprad, 5.3 tpmm (135 tpi) on 80 tracks on each sid) |
BS 6958-2-1988 |
用改进的频率调制在每面80磁道上以7958磁通变换/弧度(ftprad)、5.3tpmm(135tpi)记录的数据交换用90mm(3.5in |
(Guide to construction and use of 90 mm (3.5 in) flexible disk cartridges for data interchange, using modified frequency modulation recording at 7958 ftprad, 5.3 tpmm (135 tpi) on 80 tracks on each sid) |
BS 696-1-1989 |
牛奶和牛奶制品中脂肪含量的测定(盖尔伯法).第1部分:仪器规范 |
(Determination of fat content of milk and milk products (Gerber method) - Specification for apparatus) |
BS 696-2-1989 |
牛奶和牛奶制品中脂肪含量的测定(盖尔伯法).第2部分:方法 |
(Determination of fat content of milk and milk products (Gerber method) - Methods) |
BS 6965-1-1988 |
箱用纸板的折皱性能.90°折叠的折痕恢复的测定方法 |
(Creasing properties of carton board - Method for determination of crease recovery (spring back) of 90 ?fold) |
BS 697-1986 |
电工用橡胶手套规范 |
(Specification for rubber gloves for electrical purposes) |
BS 6972-1988 |
家用、轻工业及商用的照明器支承耦合器的一般要求规范 |
(Specification for general requirements for luminaire supporting couplers for domestic, light industrial and commercial use) |
BS 6978-1-1988 |
播种机.第1部分:单粒播种机的试验方法 |
(Seed drills - Methods of test for single seed drills) |
BS 6978-2-1990 |
播种机.第2部分:行列式条播机试验方法 |
(Seed drills - Methods of test for seed drills for rows) |
BS 6979-1989 |
机动压力机的静载挠度的测量方法 |
(Method for measurement of static deflection of power presses) |
BS 6981-1988 |
羊毛含酸量的测定方法 |
(Method for determination of acid content of wool) |
BS 6986-1-1988 |
速溶茶的分析.第1部分:取样方法 |
(Analysis of instant tea - Methods of sampling) |
BS 6986-2-1988 |
速溶茶的分析.第2部分:散装和压实体积密度的测定方法 |
(Analysis of instant tea - Methods for determination of free-flow and compacted bulk densities) |
BS 6986-3-1990 |
速溶茶的分析.水分含量的测定方法(130℃时的质量损失) |
(Analysis of instant tea - Method for determination of moisture content (loss in mass at 103 鳦)) |
BS 6986-4-1990 |
速溶茶的分析.第4部分:总灰分的测定方法 |
(Analysis of instant tea - Method for determination of total ash) |
BS 6988-1989 |
热压带对底板包装材料粘合力的测定方法 |
(Method for determination of the adhesion of autoclave tape to tray wrap material) |
BS 6989-1989 |
松散物料储存设备的安全指南 |
(Guide to safety of storage equipment for loose bulk materials) |
BS 6990-1989 |
含有处理液体或其残留液的钢管焊接的实施规程 |
(Code of practice for welding on steel pipes containing process fluids or their residuals) |
BS 6991-1990 |
家用、商业和轻工业用6/10A双极耐天气影响电连接器规范 |
(Specification for 6/10 A, two-pole weather-resistant couplers for household, commercial and light industrial equipment) |
BS 6993-2-1990 |
门窗玻璃的热和辐射特性.第2部分:U值直接测量方法(热透射率法) |
(Thermal and radiometric properties of glazing - Method for direct measurement of U-value (thermal transmittance)) |
BS 6995-1997 |
丁苯橡胶(聚合乳液和聚合溶液型)的硫化特性的估算方法 |
(Method for evaluation of vulcanization characteristics of styrene-butadiene rubber (SBR, YSBR) (emulsion and solution-polymerized types)) |
BS 6996-2003 |
耐矿物油的丙烯腈-丁二烯橡胶化合物规范 |
(Mineral oil resistant acrylonitrile-butadiene rubber compounds - Specification) |
BS 6997-1990 |
使用BS 6996丁腈橡胶制成的橡胶环形密封圈(’O’形圈)规范 |
(Specification for elastomeric toroidal sealing rings (’O’-rings) manufactured from acrylonitrile-butadiene rubbers complying with BS 6996) |
BS 6999-1989 |
用于采用固体燃料最大输出功率为45kW的燃烧设备的搪瓷低碳钢烟道管、其他部件和附件的规范 |
(Specification for vitreous-enamelled low-carbon-steel flue pipes, other components and accessories for solid-fuel-burning appliances with a rated output of 45 kW) |
BS 6F 100-1998 |
空间飞行用织物的检验和试验程序 |
(Procedure for inspection and testing of textiles for aerospace purposes) |
BS 6F 37-1990 |
航空航天用570g/m*m和640g/m*m棉粗帆布纤维规范 |
(Specification for 570 g/mUP2 and 640 g/mUP2 cotton canvas fabrics for aerospace purposes) |
BS 6F 55-1991 |
航空航天用345g/m*m和415g/m*m棉粗帆布规范 |
(Specification for 345 g/mUP2 and 415 g/mUP2 cotton canvas fabrics suitable for aerospace purposes) |
BS 6G 205-1-1995 |
飞行器用蓄电池.铅酸电池规范 |
(Secondary batteries for aircraft - Specification for lead-acid batteries) |
BS 6L 16-1985 |
99%铝薄板材和带材规范(回火号为H14或H24) |
(Specification for sheet and strip of 99% aluminium (temper designation H14 or H24)) |
BS 6L 17-1985 |
99%铝薄板材和带材规范(回火号为0) |
(Specification for sheet and strip of 99% aluminium (temper designation-O)) |
BS 6SP 4-2000 |
强度级别为880/1080MPa的带头的.平杆的,钻头的,钢合金和耐腐蚀钢制的销钉 |
(Pins headed, plain shank, drilled, steel alloy and corrosion resisting steel with a strength class 880 / 1 080 MPa) |
BS 6V 3-1943 |
航空材料规范.航空用高强度胶合板 |
(Specification for aircraft material - High strength plywood for aircraft) |
BS 6W 8-1938 |
航空用系杆(型锻的)(包括4B.A.1/2英寸B.S.F) |
(Tie rods (swaged) (No. 4 B.A. to) |
BS 700-1-1982 |
刻度移液管.第1部分:一般要求规范 |
Graduated pipettes - Specification for general requirements |
BS 700-2-1982 |
刻度移液管.第2部分:不规定等待时间移液管 |
Graduated pipettes - Specification for pipettes for which no waiting time is specified |
BS 700-3-1982 |
刻度移液管.第3部分:吹出式移液管规范 |
Graduated pipettes - Specification for blow-out pipettes |
BS 7000-1-1999 |
设计管理系统.革新管理指南 |
(Design management systems - Guide to managing innovation) |
BS 7000-10-1995 |
设计管理系统.第10部分:设计管理用术语汇编 |
(Design management systems - Glossary of terms used in design management) |
BS 7000-2-1997 |
设计管理系统.产品生产管理设计的管理指南 |
(Design management systems - Guide to managing the design of manufactured products) |
BS 7000-3-1994 |
设计管理系统.第3部分:管理设备设计指南 |
(Design management systems - Guide to managing service design) |
BS 7000-4-1996 |
设计管理系统.建筑设计的管理指南 |
(Design management systems - Guide to managing design in construction) |
BS 7000-5-2001 |
设计管理系统.过时设计管理指南 |
Design management systems - Design management systems - Guide to managing obsolescence |
BS 7000-6-2005 |
设计管理系统.包含设计的管理.指南 |
|
BS 7001-1988 |
标准化照明器支承耦合器的互换性及安全性规范 |
Specification for interchangeability and safety of a standardized luminaire supporting coupler |
BS 7005-1988 |
蒸汽压缩致冷系统用碳钢非用火压力容器的设计和制造规范 |
Specification for design and manufacture of carbon steel unfired pressure vessels for use in vapour compression refrigeration systems |
BS 7006-1989 |
农用拖曳式滚压器规范 |
Specification for trailed agricultural rollers |
BS 7007-1-1988 |
研磨制品.第1部分:截锥形研磨套筒的尺寸和标记规范 |
Abrasive products. Specification for dimensions and designation of truncated cone abrasive sleeves |
BS 7007-2-1994 |
研磨制品.第2部分:带轴砂轮的设计和尺寸规范 |
Abrasive products - Specification for designation and dimensions of coated abrasive flap wheels with shafts |
BS 7007-3-1988 |
磨料制品.第3部分:非标准涂层磨料制品尺寸公差规范 |
Abrasive products - Specification for dimensional tolerances on non-standard coated abrasive products |
BS 7007-5-1994 |
磨料产品.尺寸和公差规范及砂带牌号 |
Abrasive products - Specification for dimensions, tolerances and designation of abrasive belts |
BS 7007-6-1994 |
磨削产品.磨削板材的尺寸、公差、及名称与符号的规范 |
Abrasive products - Specification for dimensions, tolerances and designation of abrasive sheets |
BS 7009-1988 |
实时X射线照相术在焊接检验中的应用 |
(Guide to application of real-time radiography to weld inspection) |
BS 701-1953 |
啤酒酿造用麦芽浆瓶规范 |
Specification for brewers` mash flask |
BS 7010-1988 |
塑料模压件尺寸公差系统的实用规程 |
Code of practice for a system of tolerances for the dimensions of plastics mouldings |
BS 7011-0-1989 |
光学显微镜的消耗性附属品.第0部分:一般介绍 |
Consumable accessories for light microscopes - General introduction |
BS 7011-1.1-1998 |
光学显微镜用可消耗附属用品.浸油.一般用途浸油的规范 |
Consumable accessories for light microscopes - Immersion oils - Specification for immersion oils for general use |
BS 7011-2.1-1989 |
光学显微镜的消耗性附属品.第2部分:显微镜载物玻璃片.第1节:尺寸和光学特性的规范 |
Consumable accessories for light microscopes - Slides - Specification for dimensions and optical properties |
BS 7011-2.2-1998 |
光学显微镜的消耗性附属品.显微镜载玻片.精加工材料和质量规范 |
Consumable accessories for light microscopes - Slides - Specification for materials and quality of finish |
BS 7011-3.1-1989 |
光学显微镜的消耗性附属品.第3部分:盖玻璃.第1节:尺寸和光学特性规范 |
(Consumable accessories for light microscopes - Cover glasses - Specification for dimensions and optical properties) |
BS 7011-3.2-1998 |
光学显微镜的消耗性附属品.盖玻片.精加工材料和质量规范 |
Consumable accessories for light microscopes - Cover glasses - Specification for materials and quality of finish |
BS 7012-0-1989 |
光学显微镜.第0部分:一般介绍 |
Light microscopes - General introduction |
BS 7012-1-1998 |
光学显微镜.显微镜成像部件放大能力规范 |
(Light microscopes - Specification for the magnifying power of microscope imaging components) |
BS 7012-10.1-1998 |
光学显微镜.立体显微镜的最低要求.一般用途立体显微镜 |
(Light microscopes - Minimum requirements for stereo microscopes - Stereo microscopes for general use) |
BS 7012-10.2-1997 |
光学显微镜.立体显微镜的最低要求.高性能显微镜 |
(Light microscopes - Minimum requirements for stereo microscopes - High performance microscopes) |
BS 7012-10.4-1998 |
光学显微镜.立体显微镜的最低要求.提供给使用者的信息 |
(Light microscopes - Minimum requirements for stereo microscopes - Information provided to the user) |
BS 7012-11-1998 |
光学显微镜.提供给使用者的信息 |
(Light microscopes - Information provided to the user) |
BS 7012-12-1997 |
光学显微镜.第12部分:偏光显微镜的基准系统 |
(Light microscopes - Reference system of polarized light microscopy) |
BS 7012-13-1997 |
光学显微镜.35mm SLR照相机用接口连接器(T型螺纹适用) |
Light microscopes - Interfacing connection for 35 mm SLR photo cameras (T-thread adaptation) |
BS 7012-14-1997 |
光学显微镜.立体显微镜作标记 |
(Light microscopes - Marking of stereomicroscopes) |
BS 7012-15-1997 |
光学显微镜.物镜和目镜上作标记 |
(Light microscopes - Marking of objectives and eyepieces) |
BS 7012-16-2001 |
光学显微镜.可更换目镜的直径 |
(Light microscopes - Diameter of interchangeable eyepieces) |
BS 7012-3-1997 |
光学显微镜.长度160mm的镜筒成像距离的有关机械参考平面 |
(Light microscopes - Imaging distances related to mechanical reference planes for tube length 160 mm) |
BS 7012-4.1-1998 |
光学显微镜.显微镜物镜和物镜旋座的规范.螺纹类型RMS(4/5in和1/36in) |
(Light microscopes - Specification for microscope objective and nosepiece screw threads - Screw thread type RMS (4/5 in x 1/36 in)) |
BS 7012-6-1998 |
光学显微镜.光谱滤波器规范 |
(Light microscopes - Specification for spectral filters) |
BS 7012-8-1997 |
光学显微镜.目镜用分度镜 |
(Light microscopes - Graticules for eyepieces) |
BS 7012-9-1997 |
光学显微镜.第9部分:C型分界面联接器规范 |
(Light microscopes - Specification for interfacing connection type C) |
BS 7014-1989 |
中文的拉丁化指南 |
Guide to the romanization of Chinese |
BS 7016-1-1988 |
往复式内燃机的零件部件和系统.第1部分:结构与外壳的术语词汇 |
Components and systems of reciprocating internal combustion engines - Glossary of terms for structure and external covers |
BS 7016-2-1988 |
往复式内燃机的零件部件和系统.第2部分:主动齿轮的术语词汇 |
(Components and systems of reciprocating internal combustion engines - Glossary of terms for main running gear) |
BS 7016-3-1988 |
往复式内燃机的零件部件和系统.第3部分:阀门、凸输轴传动和驱动机构的术语词汇 |
Components and systems of reciprocating internal combustion engines - Glossary of terms for valves, camshaft drive and actuating mechanisms |
BS 7016-4-1988 |
往复式内燃机的零件部件和系统.第4部分:增压与进气和排气管道系统的术语词汇 |
(Components and systems of reciprocating internal combustion engines - Glossary of terms for pressure charging and air/exhaust gas ducting systems) |
BS 7016-6-1992 |
往复式内燃机的零部件和系统.第6部分:润滑系统用术语词汇 |
(Components and systems of reciprocating internal combustion engines - Glossary of terms for lubricating systems) |
BS 7016-7-1999 |
往复式内燃机的件和系统.控制系统 |
(Components and systems of reciprocating internal combustion engines - Governing systems) |
BS 7016-8-1996 |
往复式内燃机的零件部件和系统.第8部分:起动系统的术语词汇 |
(Components and systems of reciprocating internal combustion engines - Glossary of terms for starting systems) |
BS 7016-9-1997 |
往复式内燃机的件和系统.控制和监测系统 |
(Components and systems of reciprocating internal combustion engines - Control and monitoring systems) |
BS 7019-1989 |
用于电压为6.6KV及其以下系统(主要用于矿山)的、采用全屏蔽400A栓接方式防火电缆的连接装置和转接装置规范 |
(Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines) |
BS 7020-1-1989 |
铁矿石分析.第1部分:化学分析用预干燥试验样品的制备方法 |
Analysis of iron ores - Method for the preparation of pre-dried test samples for chemical analysis |
BS 7020-10.2-1989 |
铁矿石分析.铜含量的测定方法.火焰原子吸收光谱测定法 |
(Analysis of iron ores - Methods for the determination of copper content - Flame atomic absorption spectrometric method) |
BS 7020-11.1-1993 |
铁矿石分析.第11部分:钒含量测定方法.第1节:BPHA分光光度测定法 |
(Analysis of iron ores - Methods for the determination of vanadium content - BPHA spectrophotometric method) |
BS 7020-11.2-1993 |
铁矿石分析.第11部分:钒含量测定方法.第2节:火焰原子吸收光光度测定法 |
Analysis of iron ores - Methods for the determination of vanadium content - Flame atomic absorption spectrometric method |
BS 7020-12-1989 |
铁矿石分析.第12部分:钛含量的测定方法:分光光度分析法 |
Analysis of iron ores - Method for the determination of titanium content: spectrophotometric method |
BS 7020-13-1989 |
铁矿石分析.第13部分:砷含量的测定方法:分光光度分析法 |
Analysis of iron ores - Method for the determination of arsenic content: spectrophotometric method |
BS 7020-15-1993 |
铁矿石分析.第15部分:钙含量测定方法.火焰原子吸收光谱测定法 |
(Analysis of iron ores - Methods for the determination of calcium content: flame atomic absorption spectrometric method) |
BS 7020-16-1993 |
铁矿石分析.第16部分:镍和/或铬含量测定方法:火焰原子吸收光度测定法 |
(Analysis of iron ores - Methods for the determination of nickel and/or chromium contents: flame atomic absorption spectrometric method) |
BS 7020-17-1989 |
铁矿石分析.第17部分:铅和(或)锌含量的测定方法:火焰原子吸收光谱测定法 |
Analysis of iron ores - Method for the determination of lead and/or zinc contents: flame atomic absorption spectrometric method |
BS 7020-18-1993 |
铁矿石分析.第18部分:镁含量测定方法:火焰原子吸收光度测定法 |
(Analysis of iron ores - Methods for the determination of magnesium content: flame atomic absorption spectrometric method) |
BS 7020-19-1989 |
铁矿石分析.氟含量的测定方法:离子选择电极法 |
(Analysis of iron ores - Method for the determination of fluorine content: ion-selective electrode method) |
BS 7020-1989 |
铁矿石分析.第19部分:氟含量的测定方法:离子选择电极法 |
(Analysis of iron ores. Method for the determination of fluorine content: ion-selective electrode method) |
BS 7020-20-1990 |
铁矿石分析.第20部分:水可溶氯化物含量测定:离子选择电极法 |
(Analysis of iron ores - Method for the determination of water soluble chloride content: ion-selective electrode method) |
BS 7020-22-1990 |
铁矿石分析.第22部分:酸溶铁(II)含量测定方法:滴定法 |
(Analysis of iron ores - Method for the determination of acid-soluble iron (II) content: titrimetric method) |
BS 7020-3-1989 |
铁矿石分析.第3部分:化合水含量的测定方法 |
(Analysis of iron ores - Method for the determination of combined water content) |
BS 7020-4.2-1990 |
铁矿石分析.第4部分:总铁含量的测定方法.第2节:氯化钛(III)还原法 |
(Analysis of iron ores - Method for the determination of total iron content - Titanium (III) chloride reduction methods) |