标准号 |
中文名称 |
英文名称 |
BS 7324-1990 |
设备用图形符号指南 |
(Guide to graphical symbols for use on equipment) |
BS 7325-1990 |
用窄幅试验法测定纸和纸板的抗压强度 |
(Method for determination of the compressive strength of paper and board by the short span test) |
BS 7327-1-1990 |
小型固定灭火器.小型固定聚四氟乙烯灭火器规范 |
(Small fixed fire extinguishers - Specification for small fixed halon fire extinguishers) |
BS 7328-1990 |
模型蒸汽发动机和内燃机的规范 |
(Specification for model steam engines and internal combustion engines for models) |
BS 733-2-1987 |
比重瓶.第2部分:比重瓶的校准和使用方法 |
(Pyknometers - Methods for calibration and use of pyknometers) |
BS 7330-1-1990 |
电子设备用老虎钳和镊子.第1部分:术语 |
(Pliers and nippers for electronics - Nomenclature) |
BS 7330-2-1990 |
电子设备用老虎钳和镊子.第2部分:一般要求规范 |
(Pliers and nippers for electronics - Specification for general requirements) |
BS 7330-3-1990 |
电子设备用老虎钳和镊子.第3部分:试验方法 |
(Pliers and nippers for electronics - Methods of test) |
BS 7330-4-1990 |
电子设备用老虎钳和镊子.第4部分:夹紧控制专用老虎钳 |
(Pliers and nippers for electronics - Specification for dimensions of single-purpose pliers for gripping and manipulating) |
BS 7330-5-1990 |
电子设备用老虎钳和镊子.第5部分:专用剪钳尺寸规范 |
(Pliers and nippers for electronics - Specification for dimensions of single-purpose cutting nippers) |
BS 7331-1990 |
直接饰面用热固性树脂基碎木板材规范 |
(Specification for direct surfaced wood chipboard based on thermosetting resins) |
BS 7332-1990 |
热固性树脂基装饰性连续叠层板材规范 |
(Specification for decorative continuous laminates (DCL) based on thermosetting resins) |
BS 7333-1990 |
回转式动臂起重机规范 |
(Specification for slewing jib cranes) |
BS 7334-1-1990 |
建筑施工用测量器具.第1部分:使用中精度的测定方法:原理 |
(Measuring instruments for building construction - Methods for determining accuracy in use: theory) |
BS 7334-2-1990 |
建筑施工用测量器具.第2部分:使用中精度的测定方法:卷尺 |
(Measuring instruments for building construction - Methods for determining accuracy in use: measuring tapes) |
BS 7334-3-1990 |
建筑施工用测量器具.第3部分:使用中精度的测定方法:光学水准仪 |
(Measuring instruments for building construction - Methods for determining accuracy in use: optical levelling instruments) |
BS 7334-4-1992 |
建筑施工用测量器具.第4部分:经纬仪使用精度的测定方法 |
(Measuring instruments for building construction - Methods for determining accuracy in use of theodolites) |
BS 7334-5-1992 |
建筑施工用测量器具.第5部分:光学铅垂测量仪器使用精度的测定方法 |
(Measuring instruments for building construction - Methods for determining accuracy in use of optical plumbing instruments) |
BS 7334-6-1992 |
建筑施工用测量器具.第6部分:激光仪器使用精度的测定方法 |
(Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments) |
BS 7334-7-1992 |
建筑施工用测量器具.第7部分:仪器用于定线时精度的测定方法 |
(Measuring instruments for building construction - Methods for determining accuracy in use of instruments when used for setting out) |
BS 7334-8-1992 |
建筑施工用测量器具.第8部分:最远可达150m的电子式测距仪器使用中精度的测定方法 |
(Measuring instruments for building construction - Methods for determining accuracy in use of electronic distance-measuring instruments up to 150 m) |
BS 7335-1-1991 |
整体耐火材料装置.第1部分:浇注成型式安装实施准则 |
(Installation of monolithic refractories - Code of practice for installation by casting) |
BS 7335-2-1991 |
整体耐火材料的安装.喷涂式安装实用规程 |
(Installation of monolithic refractories - Code of practice for installation by gunning) |
BS 7337-1990 |
枕套及褥罩织物规范 |
(Specification for tickings) |
BS 7338-1-1990 |
缩微平片封套.第1部分:16mm缩微平片用5片道封套规范 |
(Microfilm jackets - Specification for five-channel jacket for 16 mm microfilm) |
BS 7339-1990 |
增压设备用金属结构材料的测试补充实用规程 |
(Code of practice for supplementary checking of metallic materials of construction in pressurized systems) |
BS 734-1-1973 |
用流体比重计测定牛奶的密度.第1部分:牛奶用流体比重计规范 |
(Measurement of the density of milk using a hydrometer - Specification for hydrometers for use in milk) |
BS 734-2-1959 |
用流体比重计测定牛奶的密度.第2部分:方法 |
(Measurement of the density of milk using a hydrometer - Methods) |
BS 7340-1991 |
密度638Kg/m**2-1074Kg/m**2范围内的石油烃压缩系数一览表 |
(Schedule for compressibility factors for petroleum hydrocarbons in the density range 638 kg/mUP3 to 1074 kg/mUP3) |
BS 7342-1990 |
机织物疵点术语词汇 |
(Glossary of terms for defects in woven fabrics) |
BS 7343-1990 |
针织物疵点术语词汇 |
(Glossary of terms for defects in knitted fabrics) |
BS 7344-1990 |
一般用途成卷低密度聚乙烯薄膜规范 |
(Specification for reeled low density polyethylene film for general purpose application) |
BS 7345-1990 |
螺栓、螺纹和螺柱的公称长度和通用螺纹长度规范 |
(Specification for nominal lengths of bolts, screws and studs and thread lengths for general purpose bolts) |
BS 7346-2-1990 |
烟和热控制系统部件.强制排烟和排热通风机规范 |
(Components for smoke and heat control systems - Specification for powered smoke and heat exhaust ventilators) |
BS 7346-3-1990 |
烟和热控制系统部件.烟幕规范 |
(Components for smoke and heat control systems - Specification for smoke curtains) |
BS 7346-4-2003 |
烟和热控制系统部件.利用稳态设计点火法的排烟和排热通风系统用功能推荐方法和计算方法.实施规程 |
(Components for smoke and heat control systems - Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing steady-state design fires - Code of practic) |
BS 7346-5-2005 |
烟和热控制系统部件.利用时间相关设计点火法的排烟和排热通风系统的功能推荐方法和计算方法.实施规程 |
|
BS 7346-6-2005 |
烟和热控制系统部件.电缆系统规范 |
|
BS 7347-1990 |
机械冲击试验机性能和特性导则 |
(Guide for characteristics and performance of mechanical shock testing machines) |
BS 7349-1-1993 |
断芯式音铆钉.第1部分:闭端青铆钉规范 |
(Blind rivets with break mandrel - Specification for closed end blind rivets) |
BS 7349-2-1993 |
断芯式盲铆钉.第2部分:开端和盲铆钉规范 |
(Blind rivets with break mandrel - Specification for open end blind rivets) |
BS 734C-1962 |
牛奶中与2-6%脂肪含量范围内的给定脂肪含量和观测密度(液态脂肪)对应的总固体和非脂肪固体的百分比 |
(Measurement of the density of milk using a hydrometer - Percentage of total solids and non-fatty solids in milk corresponding to given fat content and observed density fat content range 2-6 per cent () |
BS 7350-1990 |
加热和冷却水系统用双调节球形阀和流量测量装置规范 |
(Specification for double regulating globe valves and flow measurement devices for heating and chilled water systems) |
BS 7351-1990 |
工业用金属护套加热件 |
(Specification for metal-sheathed heating elements for industrial use) |
BS 7354-1990 |
高压敞开式出线站设计实用规程 |
(Code of practice for design of high-voltage open-terminal stations) |
BS 7357-1990 |
7.5L抽水马桶用冲洗水箱规范 |
(Specification for 7.5 L WC flushing cisterns) |
BS 7361-1-1991 |
阴极保护.第1部分:陆地和海上应用实施准则 |
(Cathodic protection - Code of practice for land and marine applications) |
BS 7362-1990 |
连接公共电信操作机电报网络的电报终端装置规范 |
(Specification for telex terminal apparatus for connection to public telecommunications operators’ telex networks) |
BS 7363-1990 |
焊件用受控热强度试验和焊道覆板试验方法 |
(Methods for controlled thermal severity (CTS) test and bead-on-plate (BOP) test for welds) |
BS 7364-1990 |
采用螺钉固定石膏墙板的立筋隔段和隔板以及衬里用镀锌钢螺柱和钢槽规范 |
(Specification for galvanized steel studs and channels for stud and sheet partitions and linings using screw fixed gypsum wallboards) |
BS 7367-1991 |
充气软饮料包括碳酸水用玻璃瓶制造规范 |
Specification for manufacture of glass bottles for carbonated soft drinks including carbonated water |
BS 7368-1990 |
婴儿用奶瓶橡皮奶头规范 |
(Specification for babies’ elastomeric feeding bottle teats) |
BS 7369-1991 |
社会警报系统用多频声音信号协议规范 |
(Specification for multi-frequency tone signalling protocol for social alarm systems) |
BS 7370-1-1991 |
广场保养.广场维护组织的建立和管理以及与维护有关的设计条件的推荐规范 |
Grounds maintenance - Recommendations for establishing and managing grounds maintenance organizations and for design considerations related to maintenance |
BS 7370-2-1994 |
广场保养.硬区域养护的推荐方法(包括运动场表面) |
Grounds maintenance - Recommendations for the maintenance of hard areas (excluding sports surfaces) |
BS 7370-3-1991 |
广场保养.提供舒适条件的多用途草地(运动草地除外)保养推荐指南 |
Grounds maintenance - Recommendations for maintenance of amenity and functional turf (other than sports turf) |
BS 7370-4-1993 |
广场保养.软风景敷覆物养护推荐方法(舒适的草地除外) |
Grounds maintenance - Recommendations for maintenance of soft landscape (other than amenity turf) |
BS 7370-5-1998 |
土地维护.水域维护的推荐 |
Grounds maintenance - Recommendations for the maintenance of water areas |
BS 7371-1-1992 |
金属紧固件上的涂层.一般要求和选择指南规范 |
Coatings on metal fasteners - Specification for general requirements and selection guidelines |
BS 7371-10-1994 |
金属紧固件上的覆层.第10部分:金属紧固件的有机覆层规范 |
Coatings on metal fasteners - Specification for organic coatings |
BS 7371-2-1993 |
金属紧固件上的涂层.扭矩/夹紧力关系式规范 |
(Coatings on metal fasteners - Specification for torque/clamping force relationship) |
BS 7371-4-1994 |
金属紧固件涂层.第4部分:电镀镍.镍铬和铜镍铬涂层规范. |
Coatings on metal fasteners - Specification for electroplated nickel, nickel/chromium and copper/nickel/chromium coatings |
BS 7371-6-1998 |
金属紧固件涂层.热浸镀锌涂层的规范 |
Coatings on metal fasteners - Specification for hot dipped galvanized coatings |
BS 7371-7-1994 |
金属紧固件上的覆层.机械用锌覆层的规范 |
(Coatings on metal fasteners - Specification for mechanically applied zinc coatings) |
BS 7371-8-1998 |
金属紧固件上的覆层.喷镀锌覆层的规范 |
(Coatings on metal fasteners - Specification for sherardized coatings) |
BS 7371-9-1996 |
金属紧固件的覆层.磷酸盐覆层或油覆层规范 |
(Coatings on metal fasteners - Specification for phosphate or phosphate and oil coatings) |
BS 7372-1-1991 |
工业用金属丝网和金属丝筛布的孔径尺寸和线径的组合选择指南.第1部分:总则 |
(Guide to the choice of aperture size and wire diameter combinations for industrial wire screens and woven wire cloth - General) |
BS 7372-2-1991 |
工业用金属丝网和金属丝筛布的孔径尺寸和线径的组合选择指南.第2部分:金属丝筛布的优选组合 |
(Guide to the choice of aperture size and wire diameter combinations for industrial wire screens and woven wire cloth - Preferred combinations for woven wire cloth) |
BS 7372-3-1993 |
工业金属丝网和金属丝编织布孔径和丝径组合选择指南.第3部分:预压接或压力焊接金属丝网的优选组合 |
(Guide to the choice of aperture size and wire diameter combinations for industrial wire screens and woven wire cloth - Preferred combinations for pre-crimped or pressure-welded wire screens) |
BS 7373-1998 |
规范制订导则 |
(Guide to the preparation of specifications) |
BS 7373-2-2001 |
产品规范.产品规范和产品合格声明的识别标准指南 |
Product specifications - Guide to identifying criteria for a product specification and to declaring product conformity |
BS 7375-1996 |
建筑与施工现场配电的实用规程 |
Code of practice for distribution of electricity on construction and building sites |
BS 7376-1990 |
工作台或手推车结构使用的玻璃规范 |
Specification for inclusion of glass in the construction of tables or trolleys |
BS 7376-2004 |
工作台或手推车结构中使用的玻璃.规范 |
|
BS 7376-2004 |
工作台或手推车结构中使用的玻璃.规范 |
|
BS 7378-1-1997 |
使用2号数字存取信号传输系统(DASS 2)经2048千位/秒CCITT推荐G.703接口连接公共电信系统的装置.一般要求 |
(Apparatus for connection to public telecommunications systems using the Digital Access Signalling System No. 2 (DASS 2) via a 2048 kbit/s CCITT Recommendation G.703 interface - General requirements) |
BS 7378-2-1991 |
使用2号数字存取信号传输系统(DASS 2)经2048千位/秒CCITT推荐G·03接口连接公共电信系统的装置.第2部分:自 |
(Apparatus for connection to public telecommunications systems using the Digital Access Signalling System No. 2 (DASS 2) via a 2048 kbit/s CCITT Recommendation G.703 interface - Specification for autom) |
BS 7378-3-1998 |
使用2号数字存取信号传输系统(DASS 2)经CCITT推荐G.703的2048kbit/s接口的公共电信系统连接装置.与信号传输 |
() |
BS 7379-1991 |
塑料/金属叠层可涨缩软管规范 |
Specification for plastics/metal laminate collapsible tubes |
BS 7383-1990 |
煤矿用电压不超过11KV的作为外壳内连接电缆填充剂的冷浇树脂基化合物规范 |
Specification for cold-pour resin-based compound for use as a filling medium in terminating cables in enclosures for voltages not exceeding 11 kV for use in coal mines |
BS 7385-1-1990 |
建筑物中振动的评定和测量.振动测量指南以及振动对建筑物影响的评定 |
Evaluation and measurement for vibration in buildings - Guide for measurement of vibrations and evaluation of their effects on buildings |
BS 7385-2-1993 |
建筑物振动测量和评定.地面振动损失等级指南 |
Evaluation and measurement for vibration in buildings - Guide to damage levels from groundborne vibration |
BS 7386-1997 |
住宅中现有门窗通风控制用通风带材规范(包括试验方法) |
Specification for draughtstrips for the draught control of existing doors and windows in housing (including test methods) |
BS 7388-1991 |
液压动力系统防漏泄导则 |
(Guide for prevention of leaks from hydraulic fluid power systems) |
BS 7390-1990 |
速溶茶规范 |
Specification for instant tea |
BS 7393-1990 |
用半微量彩色指示器滴定法测定石油产品中的总酸值 |
Method for determination of total acid number in petroleum products by semi-micro colour indicator titration |
BS 7394-2-1994 |
成品眼镜.配装眼镜的规范 |
Complete spectacles - Specification for prescription spectacles |
BS 7398-1991 |
手动弓形锯结构规范 |
Specification for hand hacksaw frames |
BS 7402-1991 |
电子打印价目机要求指南 |
Guide to specifying electronic typographic markup (SETM) |
BS 7403-1-1998 |
内燃机液流润滑油滤清器.不同压力/流量的试验方法 |
(Full-flow lubricating oil filters for internal combustion engines - Methods of test for differential pressure/flow characteristics) |
BS 7403-11-1998 |
内燃机用全流式润滑油滤清器.自清洁过滤器的试验方法 |
Full-flow lubricating oil filters for internal combustion engines - Methods of test for self-cleaning filters |
BS 7403-12-2000 |
内燃机液流润滑油滤清器.使用颗粒计数,污染物滞留容量的过滤效率 |
(Full-flow lubricating oil filters for internal combustion engines - Filtration efficiency using particle counting, and contaminant retention capacity) |
BS 7403-13-1991 |
内燃机用全流式润滑油过滤器.第13部分:旋入式过滤器尺寸规范 |
(Full-flow lubricating oil filters for internal combustion engines - Specification for dimensions of spin-on filters) |
BS 7403-2-1998 |
内燃机液流润滑油滤清器.件分支阀特性的试验方法 |
(Full-flow lubricating oil filters for internal combustion engines - Method of test for element by-pass valve characteristics) |
BS 7403-3-1998 |
内燃机满流式润滑油滤清器.第3部分:耐高压差和耐高温性能试验方法 |
(Full-flow lubricating oil filters for internal combustion engines - Methods of test for resistance to high differential pressure and to elevated temperature) |
BS 7403-4-1998 |
内燃机液流润滑油滤清器.初始微粒滞留效率,寿命和累积效率的试验方法(重量计法) |
(Full-flow lubricating oil filters for internal combustion engines - Methods of test for initial particle retention efficiency, life and cumulative efficiency (gravimetric method)) |
BS 7403-5-1991 |
内燃机用全流式润滑油滤清器.第5部分:冷起动摸拟和液压脉冲耐久性的试验方法 |
(Full-flow lubricating oil filters for internal combustion engines - Method of test for cold start simulation and hydraulic pulse durability) |
BS 7403-6-1991 |
内燃机用全流式润滑油滤清器.第6部分:静态破碎压力的试验方法 |
(Full-flow lubricating oil filters for internal combustion engines - Method of test for static burst pressure) |
BS 7403-7-1991 |
内燃机用全流式润滑油滤清器.第7部分:疲劳振动试验方法 |
(Full-flow lubricating oil filters for internal combustion engines - Method of test for vibration fatigue) |
BS 7403-9-1995 |
内燃机用全流式润滑油滤清器.进油口和出油口用防泄漏阀试验法 |
(Full-flow lubricating oil filters for internal combustion engines - Method of test for inlet and outlet anti-drain valves) |
BS 7404-1.1-1991 |
遥控设备和装置.第1部分:总设想.第1节:一般原理 |
(Telecontrol equipment and systems - General considerations - General principles) |
BS 7404-1.2-1991 |
远程控制设备和系统.第1部分:总条件.第2节:规范指南 |
(Telecontrol equipment and systems - General considerations - Guide for specifications) |
BS 7404-1.4-1995 |
遥控设备和系统.第1部分:一般原理.第4节:遥控数据的传输和英国标准(BS 7404 Pt.5 和7404 Pt.6)的组织编辑指 |
(Telecontrol equipment and systems - General considerations - Guide for basic aspects of telecontrol data transmission and organization of standards BS 7404:Part 5 and BS 7404:Part 6) |
BS 7404-3-1991 |
遥控设备和装置.第3部分:接口规范(电气特性) |
(Telecontrol equipment and systems - Specification for interfaces (electrical characteristics)) |
BS 7404-4-1991 |
遥控设备和装置.第4部分:性能规范 |
(Telecontrol equipment and systems - Specification for performance) |
BS 7405-1991 |
封闭管道中液体流量测量用流量表应用和选择指南 |
(Guide to selection and application of flowmeters for the measurement of fluid flow in closed conduits) |
BS 7406-1991 |
用动态吹气和静态气体法对纸和纸板的水蒸汽透湿率的测定方法 |
(Methods for determination of water vapour transmission rate of sheet materials (paper and board) by dynamic sweep and static gas methods) |
BS 7407-1991 |
直接由燃料驱动可乘儿童车辆的规范 |
(Specification for vehicles, directly propelled by energy derived from a fuel, capable of carrying children) |
BS 7410-1991 |
工业筛分用术语词汇 |
(Glossary of terms used in industrial screening) |
BS 7411-1991 |
手柄操纵背式喷雾器规范 |
(Specification for lever operated knapsack sprayers) |
BS 7412-2002 |
由未增塑聚氯乙烯(PVC-U)挤制空心型材制的塑料窗.规范 |
(Plastics windows made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles - Specification) |
BS 7413-2002 |
门窗用未增塑聚氯乙烯(PVC-U)型材.规范 |
(Unplasticized polyvinyl chloride (PVC-U) profiles for windows and doors - Specification) |
BS 7414-1991 |
塑料窗用具有热焊接角白色PVC-U挤压空心型材外型规范:B型材料 |
(Specification for white PVC-U extruded hollow profiles with heat welded corner joints for plastics windows: materials type B) |
BS 7416-1991 |
液压动力系统用精密无缝冷拔低碳钢管规范 |
(Specification for precision finished seamless cold-drawn low carbon steel tubes for use in hydraulic fluid power systems) |
BS 7417-1991 |
液压O形环密封的液压耦合器界面尺寸规范 |
(Specification for interface dimensions of flat face ’O’-ring seal hydraulic couplings) |
BS 7419-1991 |
压紧螺栓规范 |
(Specification for holding down bolts) |
BS 7420-1991 |
测定固体、液体和气体燃料热值的导则 |
(Guide for determination of calorific values of solid, liquid and gaseous fuels (including definitions)) |
BS 7423-1999 |
床身长度不小于900mm的儿童旅行帆布床安全要求规范 |
(Specification for safety requirements for Children’s travel cots of internal base length not less than 900 mm) |
BS 7424-1991 |
用静态法测定纸和纸板弯曲刚度一般原则指南 |
(Guide to general principles for determination of the bending stiffness of paper and board by static methods) |
BS 7425-1-1991 |
研磨料度粒度.第1部分:粗颗粒容积密度的测定方法 |
(Abrasive grains - Method for the determination of the bulk density of macrograins) |