标准号 |
中文名称 |
英文名称 |
BS 185-9-1970 |
.航空和航天术语词汇.第9节:推进器 |
(Glossary of aeronautical and astronautical terms - Propellers) |
BS 1853-2-1995 |
普通照明用管形荧光灯.第2部分:除BS EN 60081, BS EN 60901, BS EN 61195 and BS EN 61199荧光灯外的英国国 |
(Tubular fluorescent lamps for general lighting service - Specification for lamps used in the United Kingdom not included in BS EN 60081, BS EN 60901, BS EN 61195 and BS EN 61199) |
BS 1858-2002 |
电缆.附件.沥青基填充混合物 |
(Electric cables - Accessories - Bitumen-based filling compounds) |
BS 1868-1975 |
石油、石油化学及有关工业用钢单向阀(有法兰及对焊端)规范 |
(Specification for steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries) |
BS 187-1978 |
硅酸钙砖(灰砂砖和燧石砖)规范 |
(Specification for calcium silicate (sandlime and flintlime) bricks) |
BS 1872-1984 |
锡电镀层规范 |
(Specification for electroplated coatings of tin) |
BS 1873-1975 |
石油、石油化学及有关工业用钢球形阀、球形截止阀与单向阀(有法兰及对接焊端)规范 |
(Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries) |
BS 1876-1990 |
小便池自动冲洗水箱规范 |
(Specification for automatic flushing cisterns for urinals) |
BS 1877-10-1997 |
家用床上用品.第10部分:童床、摇篮童车及类似家用垫子规范 |
(Domestic bedding - Specification for mattresses and bumpers for Children’s cots, perambulators and similar domestic articles) |
BS 1877-8-1974 |
家庭床上用品规范.第8部分:家用枕头和长枕头(微孔橡胶枕头和长枕头除外) |
(Domestic bedding - Pillows and bolsters for domestic use (excluding cellular rubber pillows and bolsters)) |
BS 188-1976 |
液体粘度测定方法 |
(Methods for determination of the viscosity of liquids) |
BS 1881-112-1983 |
混凝土试验.第112部分:立方体试块的加速养护方法 |
(Testing concrete - Methods of accelerated curing of test cubes) |
BS 1881-113-1983 |
混凝土试验.第113部分:无细料混凝土立方体试块的制作和养护方法 |
(Testing concrete - Method for making and curing no-fines test cubes) |
BS 1881-119-1983 |
混凝土试验.第119部分:用部分弯曲断裂梁测定抗压强度的方法(与立方体方法等效) |
(Testing concrete - Method for determination of compressive strength using portions of beams broken in flexure (equivalent cube method)) |
BS 1881-121-1983 |
混凝土试验.第121部分:静态压缩弹性模量的测定方法 |
(Testing concrete - Method for determination of static modulus of elasticity in compression) |
BS 1881-122-1983 |
混凝土试验.第122部分:吸水性的测定方法 |
(Testing concrete - Method for determination of water absorption) |
BS 1881-124-1988 |
混凝土试验.第124部分:硬结混凝土的分析方法 |
(Testing concrete - Methods for analysis of hardened concrete) |
BS 1881-125-1986 |
混凝土试验.第125部分:实验室新拌混凝土的拌合和取样方法 |
(Testing concrete - Methods for mixing and sampling fresh concrete in the laboratory) |
BS 1881-127-1990 |
混凝土试验.第127部分:采用比较立方体试验法的混凝土立方体压缩机的性能检验方法 |
(Testing concrete - Method of verifying the performance of a concrete cube compression machine using the comparative cube test) |
BS 1881-128-1997 |
混凝土试验.第128部分:新搅拌混凝土的分析方法 |
(Testing concrete - Methods for analysis of fresh concrete) |
BS 1881-129-1992 |
混凝土试验.第129部分:部分压实半干新拌混凝土稠密度的测定方法 |
(Testing concrete - Method for determination of density of partially compacted semi-dry fresh concrete) |
BS 1881-130-1996 |
混凝土试验.第130部分:混凝土试样固化温度对比方法 |
(Testing concrete - Method for temperature-matched curing of concrete specimens) |
BS 1881-131-1998 |
混凝土试验.混凝土试样中水泥含量的测试方法 |
(Testing concrete - Methods for testing cement in a reference concrete) |
BS 1881-201-1986 |
混凝土试验.第201部分:硬结混凝土的无损试验方法指南 |
(Testing concrete - Guide to the use of non-destructive methods of test for hardened concrete) |
BS 1881-203-1986 |
混凝土试验.第203部分:混凝土的超声波脉冲速度测量的推荐方法 |
(Testing concrete - Recommendations for measurement of velocity of ultrasonic pulses in concrete) |
BS 1881-204-1988 |
混凝土试验.第204部分:电磁式保护层厚度计使用的推荐方法 |
(Testing concrete - Recommendations on the use of electromagnetic covermeters) |
BS 1881-205-1986 |
混凝土试验.第205部分:混凝土的射线照相术推荐标准 |
(Testing concrete - Recommendations for radiography of concrete) |
BS 1881-206-1986 |
混凝土试验.第206部分:混凝土应力测定的推荐方法 |
(Testing concrete - Recommendations for determination of strain in concrete) |
BS 1881-207-1992 |
混凝土试验.第207部分:用接近面层试验法对混凝土强度评定的推荐方法 |
(Testing concrete - Recommendations for the assessment of concrete strength by near-to-surface tests) |
BS 1881-208-1996 |
混凝土试验.第208部分:混凝土的初期表面吸水性测定的推荐方法 |
(Testing concrete - Recommendations for the determination of the initial surface absorption of concrete) |
BS 1881-209-1990 |
混凝土试验.第209部分:动态弹性模量测定的推荐方法 |
(Testing concrete - Recommendations for the measurement of dynamic modulus of elasticity) |
BS 1892-2.11-1989 |
体育馆器械.特殊要求.训练和比赛用网和支承滑轨规范 |
(Gymnasium equipment - Particular requirements - Specification for practice and games netting and supporting trackways) |
BS 1892-2.6-1986 |
体育馆器械.第2部分:特殊要求.第6节:拳击台规范 |
(Gymnasium equipment - Particular requirements - Specification for boxing rings) |
BS 1892-2.9-1986 |
体育馆器械.第2部分:特殊要求.第9节:举重训练设备规范 |
(Gymnasium equipment - Particular requirements - Specification for weight training equipment) |
BS 1892-3-2003 |
体育馆器械.运动垫.体操用垫子、气垫和落地处的防火安全要求规范 |
(Gymnasium equipment - Sports mats - Specification for fire safety requirements for mats, mattresses and landing areas) |
BS 1892-4-2003 |
体育馆器械.运动垫.格斗用垫子规范 |
(Gymnasium equipment - Sports mats - Specification for combat mats) |
BS 1895-1973 |
医院用有轮的金属架屏风规范 |
(Specification for metal-framed wheeled screens for use in hospitals) |
BS 1896-1972 |
印相纸的尺寸规范 |
(Specification for sizes of reprographic papers) |
BS 1900-1976 |
副基准温度计规范 |
(Specification for secondary reference thermometers) |
BS 1902-10.1-1993 |
耐火材料试验方法.熔模铸造外壳铸模系统.高温下抗变形能力的测定 |
(Methods of testing refractory materials - Investment casting shell mould systems - Determination of resistance to deformation at elevated temperatures) |
BS 1902-10.2-1994 |
耐火材料试验方法.熔模铸造外壳铸模系统.高温下透气性和标准空气流量的测定 |
(Methods of testing refractory materials - Investment casting shell mould systems - Determination of permeability and standard air flow capacity at elevated temperatures) |
BS 1902-11-1991 |
耐火材料试验方法.第11部分:耐火灰浆和腻子 |
(Methods of testing refractory materials - Refractory mortars and putties) |
BS 1902-2.2-1974 |
耐火材料的试验方法.第2部分:化学分析(湿法).第2节:含铬材料的化学分析 |
(Methods of testing refractory materials - Chemical analysis (wet methods) - Chemical analysis of chrome-bearing materials) |
BS 1902-2.3 Addendum No. 1-197 |
耐火材料的试验方法.第2部分:化学分析(湿法).第3节:镁和白云石的化学分析.第1次修改 |
(Methods of testing refractory materials - Chemical analysis (wet methods) - Determination of boron in magnesites) |
BS 1902-3.0-1988 |
耐火材料的试验方法.第3部分:一般特性和结构特性.第0节:说明 |
(Methods of testing refractory materials - General and textural properties - Introduction) |
BS 1902-3.1-1981 |
耐火材料的试验方法.一般特性和结构特性.取样导则 |
(Methods of testing refractory materials - General and textural properties - Guidance on sampling) |
BS 1902-3.10-1981 |
耐火材料的试验方法.一般特性和结构特性.一氧化碳性的测定(1902-310法) |
(Methods of testing refractory materials - General and textural properties - Determination of resistance to carbon monoxide (method 1902-310)) |
BS 1902-3.11-1983 |
耐火材料的试验方法.第3部分:一般特性和结构特性.第11节:耐火砖块的尺寸与形状的测量(1902-311法) |
(Methods of testing refractory materials - General and textural properties - Measurement of dimensions and shape of refractory bricks and blocks (methods 1902-311)) |
BS 1902-3.13-1996 |
耐火材料的试验方法.第3部分:一般特性和结构特性.耐火砖块的外型缺陷和尺寸的测量.第13节:耐火砖块的边角缺 |
(Methods of testing refractory materials - General and textural properties - Measurement of dimensions and external defects of refractory bricks - Corner and edge defects and other surface imperfection) |
BS 1902-3.14-1996 |
耐火材料的试验方法.一般特性和结构特性.水合趋势的测定 |
(Methods of testing refractory materials - General and textural properties - Determination of hydration tendency) |
BS 1902-3.16-1990 |
耐火材料试验方法.第3部分:一般特性和结构特性.第16节:气孔尺寸分布情况的测定(1902-316法) |
(Methods of testing refractory materials - General and textural properties - Determination of pore size distribution (method 1902-316)) |
BS 1902-3.17-1990 |
耐火材料的试验方法.第3部分:一般特性和结构特性.第17节:密实成型制品体积密度和堆集密度的测定(1902-317法 |
(Methods of testing refractory materials - General and textural properties - Determination of volume and bulk density of dense shaped products (methods 1902-317)) |
BS 1902-3.19-1996 |
耐火材料的试验方法.一般特性和结构特性.耐火砖块的外型缺陷和尺寸测量.尺寸及与图形的一致性 |
(Methods of testing refractory materials - General and textural properties - Measurement of dimensions and external defects of refractory bricks - Dimensions and conformity to drawings) |
BS 1902-3.2-1981 |
耐火材料的试验方法.一般特性和结构特性.试样尺寸的测量 |
(Methods of testing refractory materials - General and textural properties - Measurement of dimensions of specimens for testing (methods 1902-302)) |
BS 1902-3.3-1981 |
耐火材料的试验方法.第3部分:一般特性和结构特性.第3节:筛析(1902-303法) |
(Methods of testing refractory materials - General and textural properties - Sieve analysis (methods 1902-303)) |
BS 1902-3.5-1981 |
耐火材料的试验方法.一般特性和结构特性.粉末密度的测定 |
(Methods of testing refractory materials - General and textural properties - Determination of powder density (method 1902-305)) |
BS 1902-4.0-1985 |
耐火材料的试验方法.外加应力作用下测量的特性.说明 |
(Methods of testing refractory materials - Properties measured under an applied stress - Introduction) |
BS 1902-4.4-1985 |
耐火材料的试验方法.第4部分:外加应力作用下测量的特性.第0节:引言 |
(Methods of testing refractory materials. Properties measured under an applied stress. Introduction) |
BS 1902-4.6-1985 |
耐火材料的试验方法.第4部分:外加应力作用下测量的特性.第6节:环境温度下耐磨性(环境温度下磨损度指数)的测 |
(Methods of testing refractory materials - Properties measured under an applied stress - Determination of resistance to abrasion at ambient temperature (abradability index at ambient temperature) (meth) |
BS 1902-5.0-1992 |
耐火材料的试验方法.耐火和热特性.说明 |
(Methods of testing refractory materials - Refractory and thermal properties - Introduction) |
BS 1902-5.11-1986 |
耐火材料的试验方法.第5部分:耐火和耐热性.第11节:通过棱柱试验测定耐热剥离性(1902-511法) |
(Methods of testing refractory materials - Refractory and thermal properties - Determination of thermal spalling resistance by the prism test (method 1902-511)) |
BS 1902-5.13-1984 |
耐火材料的试验方法.第5部分:耐火和耐热性.第13节:抗炉渣吸附性的测定(1902-513法) |
(Methods of testing refractory materials - Refractory and thermal properties - Determination of resistance to attack by slag (method 1902-513)) |
BS 1902-5.14-1992 |
耐火材料的试验方法.耐火与耐热性能.热膨胀性的测定(温度在1500℃以下)(方法1902-5.14) |
(Methods of testing refractory materials - Refractory and thermal properties - Determination of thermal expansion (temperatures up to 1500 ℃) (methods 1902-5.14)) |
BS 1902-5.3-1990 |
耐火材料试验方法.耐火和耐热性.热膨胀性的测定(1100℃水平法)(方法1902-503) |
(Methods of testing refractory materials - Refractory and thermal properties - Determination of thermal expansion (horizontal method to 1100 ℃) (method 1902-503)) |
BS 1902-5.4-1990 |
耐火材料试验方法.第5部分:耐火和耐热性.第4节:大块试件热膨胀的测定(1902-504法) |
(Methods of testing refractory materials - Refractory and thermal properties - Determination of thermal expansion (for large test pieces) (method 1902-504)) |
BS 1902-5.5-1992 |
耐火材料的试验方法.耐火和耐热性.引言 |
(Methods of testing refractory materials. Refractory and thermal properties. Introduction) |
BS 1902-5.8-1992 |
耐火材料的试验方法.第5部分:耐火和耐热性.第8部分:热导率测定(拼合柱法)(方法1902-508) |
(Methods of testing refractory materials - Refractory and thermal properties - Determination of thermal conductivity (split column method) (method 1902-508)) |
BS 1902-6-1986 |
耐火材料的试验方法.第6部分:陶瓷纤维制品 |
(Methods of testing refractory materials - Ceramic fibre products) |
BS 1902-7.0-1987 |
耐火材料的试验方法.用于整体结构的不定型耐火材料.说明和定义 |
(Methods of testing refractory materials - Unshaped refractories used in monolithic construction - Introduction and definitions) |
BS 1902-7.1-1987 |
耐火材料的试验方法.第7部分:用于整体结构的未成形耐火材料.第1节:取样导则 |
Methods of testing refractory materials - Unshaped refractories used in monolithic construction - Guidance on sampling (of unshaped refractories) |
BS 1902-7.2-1987 |
耐火材料的试验方法.第7部分:用于整体结构的未成型耐火材料.第2节:供货与接收货时的材料试验(1902-702法) |
(Methods of testing refractory materials - Unshaped refractories used in monolithic construction - Testing of material as supplied and received (method 1902-702)) |
BS 1902-7.3-1987 |
耐火材料的试验方法.第7部分:用于整体结构的未成型耐火材料.第3节:振动密实集浇注试件的制备(1902-703法) |
Methods of testing refractory materials - Unshaped refractories used in monolithic construction - Preparation of test pieces from dense castables by vibration (method 1902-703) |
BS 1902-7.4-1987 |
耐火材料的试验方法.第7部分:用于整体结构的未成型耐火材料.第4节:隔离浇注试件的制备(1902-704法) |
(Methods of testing refractory materials - Unshaped refractories used in monolithic construction - Preparation of test pieces from insulating castables (method 1902-704)) |
BS 1902-7.5-1987 |
耐火材料的试验方法.第7部分:用于整体结构的未成型耐火材料.第5节:可塑和夯筑混合试件的制备(1902-705法) |
(Methods of testing refractory materials - Unshaped refractories used in monolithic construction - Preparation of test pieces from mouldables and ramming mixes (method 1902-705)) |
BS 1902-7.6-1987 |
耐火材料的试验方法.第7部分:用于整体结构的未成型耐火材料.第6节:作为预制试件的材料试验 |
(Methods of testing refractory materials - Unshaped refractories used in monolithic construction - Testing of materials as preformed test pieces) |
BS 1902-7.7-1987 |
耐火材料的试验方法.第7部分:用于整体结构的未成型耐火材料.第0节:引言与定义 |
(Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Introduction and definitions) |
BS 1902-9.1-1987 |
耐火材料的试验方法.第9部分:用仪器方法进行化学分析.第1节:硅酸铝耐火材料的X射线荧光分析法 |
(Methods of testing refractory materials - Chemical analysis by instrumental methods - Analysis of alumino-silicate refractories by X-ray fluorescence) |
BS 1902-9.2-1987 |
耐火材料试验方法.第9部分:仪器化学分析法.第2节:用X射线荧光光谱法分析硅质耐火材料 |
(Methods of testing refractory materials - Chemical analysis by instrumental methods - Analysis of silica refractories by X-ray fluorescence) |
BS 1902-9.3-1998 |
耐火材料的试验方法.用仪器分析法进行化学分析.铬的测定 |
(Methods of testing refractory materials - Chemical analysis by instrumental methods - Determination of chromium (VI)) |
BS 1903-1981 |
服装工业用术语词汇 |
(Glossary of terms used by the clothing industry) |
BS 1906-1952 |
(空气和水的)1/8in-1/4in公称尺寸的软管接头规范 |
(Specification for hose couplings (air and water) () |
BS 1911-1990 |
硬肥皂规范 |
(Specification for hard soap) |
BS 1912-1990 |
肥皂片规范 |
(Specification for soap flakes) |
BS 1913-1990 |
软肥皂规范 |
(Specification for soft soap) |
BS 1914-1990 |
香皂规范 |
(Specification for toilet soap) |
BS 1915-1968 |
幻灯机规范 |
(Specification for still projectors) |
BS 1917-1968 |
幻灯片和摄影软片规范 |
(Specification for slides and film strips) |
BS 1918-1-1978 |
玻璃容器的精加工.第1部分:连续螺纹精加工规范 |
(Glass container finishes - Specification for continuous thread finish) |
BS 1918-2-1981 |
玻璃容器的精加工.第2部分:冠形盖瓶口精加工规范 |
(Glass container finishes - Specification for crown finish) |
BS 1919-1-1993 |
弓锯条.第1部分:手持式和机动式弓锯条规范 |
(Hacksaw blades - Specification for hand and machine hacksaw blades) |
BS 1919-2-1995 |
锯床钢锯条.第2部分:切割性能规范 |
(Hacksaw blades - Specification for cutting performance) |
BS 192-1-1996 |
开口扳手.第1部分:米制单位和统一单位 |
(Open-ended wrenches - Metric and unified) |
BS 192-2-1998 |
开口扳手.BS和惠氏螺纹 |
(Open-ended wrenches - BS and Whitworth) |
BS 1922-1987 |
药用玻璃剂量量器规范 |
(Specification for glass dispensing measures for pharmaceutical purposes) |
BS 1924-1-1990 |
土木工程稳定材料.第1部分:材料稳定处理前的一般要求、取样、试样制备和试验 |
(Stabilized materials for civil engineering purposes - General requirements, sampling, sample preparation and tests on materials before stabilization) |
BS 1924-2-1990 |
土木工程稳定材料.第2部分:水泥稳定和石灰稳定材料试验方法 |
(Stabilized materials for civil engineering purposes - Methods of test for cement-stabilized and lime-stabilized materials) |
BS 1929-1953 |
内窥镜与诊断仪器用灯的螺纹及外部尺寸规范 |
(Specification for screw threads and external dimensions of lamps for endoscopic and diagnostic instruments) |
BS 1932-2-1989 |
卷装纱和线的强度试验.第2部分:打结强度和钩接强力的测定方法 |
(Testing the strength of yarns and threads from packages - Methods for determination of knot strength and loop strength) |
BS 1935-1972 |
多轴钻头用轴头及可调接头规范 |
(Specification for spindle noses and adjustable adaptors for multi-spindle heads) |
BS 1936-1-1952 |
螺纹切槽和退刀纹规范.第1部分:英制螺纹 |
(Undercuts and runouts for screw threads - Inch screw threads) |
BS 1936-2-1991 |
螺纹切槽和退刀纹规范.第2部分:ISO米制螺纹规范 |
(Undercuts and runouts for screw threads - Specification for ISO metric screw threads) |
BS 1937-1953 |
工程用棘轮摇钻及钻柱规范 |
(Specification for engineers’ ratchet braces and drilling pillars) |
BS 1940-1987 |
工业用丁酮(乙基甲基酮)规范 |
(Specification for butanone (ethyl methyl ketone) for industrial use) |
BS 1941-1993 |
工业用4甲基-2-戊酮(甲基异戊基甲酮)规范 |
(Specification for 4-methylpentan-2-one (isobutyl methyl ketone) for industrial use) |
BS 1943-1989 |
木工凿和扁凿规范 |
(Specification for woodworking chisels and gouges) |
BS 1945-1971 |
加热设备(煤气、电力与燃油的)的炉栏规范 |
(Specification for fireguards for heating appliances (gas, electric and oil-burning)) |
BS 196-1961 |
电压达250V单相交流电路用带接地线的保护式不可反转插头、插座电缆藕合器与设备藕合器规范 |
(Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a.c. circuits up to 250 volts) |
BS 1968-1953 |
球阀用浮球(铜)规范 |
(Specification for floats for ballvalves (copper)) |
BS 1970-2001 |
橡胶和PVC制成的热水袋规范 |
(Hot water bottles manufactured from rubber and PVC - Specification) |
BS 1974-1953 |
铝合金大铆钉.(公称直径1/2英寸至1英寸)规范 |
(Specification for large aluminium alloy rivets () |
BS 1978-1965 |
手摇钻规范 |
(Specification for bit braces) |
BS 1979-1985 |
精神病院用病房床架规范 |
(Specification for hospital ward bedsteads for psychiatric hospitals) |
BS 1981-1991 |
统一标准机、螺钉与螺母规范 |
(Specification for unified machine screws and machine screw nuts) |
BS 1982-0-1990 |
有机材料制成或含有有机材料的板条制品的耐霉性.第0部分:测定方法指南 |
(Fungal resistance of panel products made of or containing materials of organic origin - Guide to methods for determination) |
BS 1982-1-1990 |
有机材料制成或含有有机材料的板条制品的耐霉性.第1部分:抗木腐担子菌性的测定方法 |
(Fungal resistance of panel products made of or containing materials of organic origin - Method for determination of resistance to wood-rotting Basidiomycetes) |
BS 1982-2-1990 |
有机材料制成或含有有机材料的板条制品的耐霉性.第2部分:抗纤维素分解微真菌性的测定方法 |
(Fungal resistance of panel products made of or containing materials of organic origin - Method for determination of resistance to cellulose-decomposing microfungi) |
BS 1982-3-1990 |
有机材料制成或含有有机材料的板条制品的耐霉性.第3部分:抗霉菌或抗霉性的测定方法 |
(Fungal resistance of panel products made of or containing materials of organic origin - Methods for determination of resistance to mould or mildew) |
BS 1983-1-1969 |
机床与便携式电动工具用卡盘规范.刀具夹紧卡盘 |
(Specification for chucks for machine tools and portable power tools - Tool-holding chucks) |
BS 1983-2-1994 |
机床与轻便电动工具用卡盘.电动工件卡盘规范 |
(Chucks for machine tools and portable power tools - Specification for workholding chucks, power operated) |
BS 1983-3-1987 |
机床与轻便电动工具用卡盘规范.第3部分:电动工件卡盘的底爪用夹头垫尺寸 |
(Chucks for machine tools and portable power tools - Specification for dimensions of collet pads for base jaws of power operated workholding chucks) |