标准号 |
中文名称 |
英文名称 |
| ASTM F 1125-1987 |
打印系统中成象质量术语 |
Terminology of Image Quality in Impact Printing Systems |
| ASTM F 1126-1997 |
食品电切刀 |
Food Cutters (Electric) |
| ASTM F 1127-1988 |
危险品泄漏紧急治理人员设置封锁线 |
Containment by Emergency Response Personnel of Hazardous Material Spills |
| ASTM F 1128-1988 |
用盐冲洗法作透明塑料和表层的抗腐蚀性的试验方法 |
Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using Salt Impingement Method |
| ASTM F 1129-1988 |
用含水泡沫控制从不溶混合挥发性液体中产生的蒸气危害 |
Using Aqueous Foams to Control the Vapor Hazard from Immiscible Volatile Liquids |
| ASTM F 1130-1999 |
船涂覆系统检验的标准实施规程 |
Standard Practice for Inspecting the Coating System of a Ship |
| ASTM F 1134-1994 |
船用电动机和发电机绝缘电阻监测器 |
Insulation Resistance Monitor for Shipboard Electrical Motors and Generators |
| ASTM F 1135-1999 |
紧固件用铬酸镉或锌有机防蚀镀层标准规范 |
Standard Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners |
| ASTM F 1136-1988 |
紧固件用铬或锌防蚀镀层 |
Chromium/Zinc Corrosion Protective Coatings for Fasteners |
| ASTM F 1137-1988 |
紧固件用磷酸盐/油和磷酸盐/有机防蚀镀层 |
Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings for Fasteners |
| ASTM F 1138-1998 |
机械连接挡溅板 |
Spray Shields for Mechanical Joints |
| ASTM F 1239-2002 |
通过测量晶隙氧还原表征硅片氧沉淀的标准试验方法 |
Standard Test Methods for Oxygen Precipitation Characterization of Silicon Wafers by Measurement of Interstitial Oxygen Reduction |
| ASTM F 1240-1989 |
鞋靴在有不同外来杂质界面的通道表面上的防滑性测量分类结果 |
Categorizing Results of Footwear Slip Resistant Measurements on Walkway Surfaces with an Interface of Various Foreign Substances |
| ASTM F 1241-1995 |
硅片生产工艺的名词术语 |
Terminology of Silicon Technology |
| ASTM F 1242-1996 |
带管头和不带管头的气管导管 |
Cuffed and Uncuffed Tracheal Tubes |
| ASTM F 1243-1989 |
气管导管连接件 |
Tracheal Tube Connectors |
| ASTM F 1337-1991 |
海船和海洋系统、设备用人体工效要求 |
Human Engineering Program Requirements for Ships and Marine Systems, Equipment and Facilities |
| ASTM F 1338-1991 |
船用主动力中速柴油发动机覆盖性能和机组最小工作范围 |
Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly |
| ASTM F 1339-1992 |
急救医疗服务系统的组织和运作 |
Organization and Operation of Emergency Medical Services Systems |
| ASTM F 134-1985 |
用氦质谱仪检漏器测定电子件密封性的试验方法 |
Test Methods for Determining Hermeticity of Electron Devices with a Helium Mass Spectrometer Leak Detector |
| ASTM F 1341-1999 |
外科植入应用的非金属钛丝的标准规范 |
Standard Specification for Unalloyed Titanium Wire for Surgical Implant Applications |
| ASTM F 1342-1991 |
防护服装耐穿刺能力的测试方法 |
Test Method for Protective Clothing Material Resistance to Puncture |
| ASTM F 1343-1991 |
麻醉设备.麻醉气体净化系统 |
Anesthetic Equipment - Scavenging Systems for Anesthetic Gases |
| ASTM F 1344-1993 |
橡胶地板砖 |
Rubber Floor Tile |
| ASTM F 1345-1996 |
锌-5%铝-铈合金涂覆钢连接链环栏栅结构 |
Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM F 152-1995 |
非金属垫料抗拉试验的测试方法 |
Test Methods for Tension Testing of Nonmetallic Gasket Materials |
| ASTM F 1520-1994 |
胶片暗盒和织带盒传动转矩测定的标准试验方法 |
Standard Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges |
| ASTM F 1521-1996 |
炉灶轻油性能标准试验方法 |
Standard Test Methods for Performance of Range Tops |
| ASTM F 1584-1995 |
事故查找过程中建筑物标志标准实用规程 |
Standard Practice for Marking Buildings During Disaster Search Operations |
| ASTM F 1585-2000 |
医用多孔性隔板包装盒完整性试验的标准导则 |
Standard Guide for Integrity Testing of Porous Barrier Medical Packages |
| ASTM F 1586-2002 |
外科植入物用锻制氮加强的21铬10镍3锰2.5钼不锈钢棒(UNS S31675)标准规范 |
Standard Specification for Wrought Nitrogen Strengthened 21 Chromium - 10 Nickel - 3 Manganese - 2.5 Molybdenum Stainless Steel Bar for Surgical Implants (UNS S31675) |
| ASTM F 1587-1999 |
冰球守门员用头、脸保护设备标准规范 |
Standard Specification for Head and Face Protective Equipment for Ice Hockey Goaltenders |
| ASTM F 1861-1998 |
弹性墙座的标准规范 |
Standard Specification for Resilient Wall Base |
| ASTM F 1862-1998 |
医疗面具抗人造血渗透的标准试验方法(以已知速率固定量的水平投影) |
Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity) |
| ASTM F 1863-1998 |
测量夜视镜透明部件的加权过滤系数的标准试验方法 |
Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmisivity of Transparent Parts |
| ASTM F 1864-1998 |
光学和红外透明材料及覆层的耐尘土腐蚀的标准试验方法 |
Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings |
| ASTM F 1865-1998 |
交联聚乙烯管用带压缩套筒的机械冷膨胀插入配件的标准规范 |
Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing |
| ASTM F 256-1994 |
含有18%或26%铬的铬铁密封合金 |
Chromium-Iron Sealing Alloys with 18 or 26 Percent Chromium |
| ASTM F 26-1987 |
测定半导体单晶体取向的方法 |
Test Methods for Determining the Orientation of a Semiconductive Single Crystal |
| ASTM F 269-1960 |
钨丝弯曲度的试验方法 |
Test Method for Sag of Tungsten Wire |
| ASTM F 28-1991 |
光电导衰减测量法测定大块锗和硅中少数载流子寿命的方法 |
Test Methods for Minority-Carrier Lifetime in Bulk Geranium and Silicon by Measurement of Photoconductivity Decay |
| ASTM F 288-1996 |
电子器件和电灯用钨丝 |
Tungsten Wire for Electron Devices and Lamps |
| IEEE/ASTM SI 10-1997 |
国际单位制使用的IEEE/ASTM SI-10标准:现代米制(取代ASTM E380和ANSI/IEEE Std 268-1992) |
IEEE/ASTM SI-10 Standard for Use of the International System of Units (SI):The Modern Metric System (Replaces ASTM E380 and ANSI/IEEE Std 268-1992) |
| ISO/ASTM 51204-2002 |
食品加工用γ辐射装置中剂量测定的实施规程 |
(Practice for dosimetry in gamma irradiation facilities for food processing) |
| ISO/ASTM 51204-2004 |
食品加工用γ辐射装置中剂量测定的实施规程 |
|
| ISO/ASTM 51205-2002 |
硫酸铈和硫酸高铈剂量测定系统的使用规程 |
(Practice for use of a ceric-cerous sulfate dosimetry system) |
| ISO/ASTM 51261-2002 |
辐射处理用剂量测定系统的选择和校准指南 |
(Guide for selection and calibration of dosimetry systems for radiation processing) |
| ISO/ASTM 51275-2002 |
放射性铬薄膜剂量测定系统使用规程 |
(Practice for use of a radiochromic film dosimetry system) |
| ISO/ASTM 51275-2004 |
放射性铬薄膜剂量测定系统使用规程 |
|
| ISO/ASTM 51310-2002 |
放射性铬光波导剂量测定系统使用规程 |
(Practice for use of a radiochromic optical waveguide dosimetry system) |
| ISO/ASTM 51310-2004 |
放射性铬光波导剂量测定系统使用规程 |
|
| ISO/ASTM 51400-2003 |
高剂量照射剂量测定校准实验室的特征和性能规程 |
(Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory) |
| ISO/ASTM 51400-2003 |
高剂量照射剂量测定校准实验室的特征和性能规程 |
|
| ISO/ASTM 51401-2003 |
重铬酸盐剂量测定系统的使用规程 |
(Practice for use of a dichromate dosimetry system) |
| ISO/ASTM 51401-2003 |
重铬酸盐剂量测定系统的使用规程 |
|
| ISO/ASTM 51431-2002 |
食品加工用电子和韧致辐射辐照装置中剂量测定的实施规程 |
(Practice for dosimetry in electron and bremsstrahlung irradiation facilities for food processing) |
| ISO/ASTM 51538-2002 |
酒精-氯苯剂量测定系统使用规程 |
(Practice for use of the ethanol-chlorobenzene dosimetry system) |
| ISO/ASTM 51539-2002 |
辐射灵敏指示计使用指南 |
(Guide for use of radiation-sensitive indicators) |
| ISO/ASTM 51540-2002 |
放射性铬液体剂量测定系统使用规程 |
(Practice for use of a radiochromic liquid dosimetry system) |
| ISO/ASTM 51540-2004 |
放射性铬液体剂量测定系统使用规程 |
|
| ISO/ASTM 51607-2002 |
丙氨酸-EPR剂量测定系统实施规程 |
(Practice for use of the alanine-EPR dosimetry system) |
| ISO/ASTM 51607-2004 |
丙氨酸-EPR剂量测定系统的使用规程 |
|
| ISO/ASTM 51608-2002 |
辐射加工用X射线(韧致辐射)设备中放射剂量测定实施规程 |
(Practice for dosimetry in X-ray (bremsstrahlung) facility for radiation processing) |
| ISO/ASTM 51631-2003 |
电子束剂量测量和剂量仪标定用测热计量系统的使用规程 |
(Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations) |
| ISO/ASTM 51631-2003 |
电子束剂量测量和剂量仪标定用测热计量系统的使用规程 |
|
| ISO/ASTM 51649-2002 |
在300 keV 和25 MeV 能量之间辐射加工用电子束设备中剂量测定的实施规程 |
(Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV) |
| ISO/ASTM 51650-2002 |
醋酸纤维素剂量测定系统使用规程 |
(Practice for use of cellulose acetate dosimetry systems) |
| ISO/ASTM 51702-2002 |
辐射加工用γ辐照装置中剂量测定的实施规程 |
(Practice for dosimetry in a gamma irradiation facility for radiation processing) |
| ISO/ASTM 51702-2004 |
辐射加工用γ辐射装置中剂量测定的实施规程 |
|
| ISO/ASTM 51707-2002 |
辐射加工的剂量测定中不确定度的估算指南 |
(Guide for estimating uncertainties in dosimetry for radiation processing) |
| ISO/ASTM 51818-2002 |
辐射加工的电子束设备中剂量测定的实施规程 |
(Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 KeV and 300 KeV) |
| ISO/ASTM 51900-2002 |
食品和农产品辐射研究中的剂量测定指南 |
(Guide for dosimetry in radiation research on food and agricultural products) |
| ISO/ASTM 51939-2002 |
血液照射剂量测定的实施规程 |
(Practice for blood irradiation dosimetry) |
| ISO/ASTM 51940-2002 |
不育计划的昆虫辐照剂量测定指南 |
(Guide for dosimetry for irradiation of insects for sterile release programs) |
| ISO/ASTM 51940-2004 |
无生殖力昆虫释放计划的剂量测定指南 |
|
| ISO/ASTM 51956-2002 |
辐射加工用热致发光剂量测定(TLD)系统使用规程 |
(Practice for use of thermoluminescence-dosimetry (TLD) systems for radiation processing) |
| ISO/ASTM 52116-2002 |
自带的干式存储γ射线辐照器的剂量测定实施规范 |
(Practice for dosimetry for a self-contained dry-storage gamma-ray irradiator) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com