标准号 |
中文名称 |
英文名称 |
| ANSI/ASTM D 5704-1995 |
人工传输和主传动轴用润滑油的热性能和氧化稳定性评价的试验方法 |
Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmission and Final Drive Axles (05.03) |
| ANSI/ASTM D 5705-1996 |
渣油上气相硫化氢测定的测试方法 |
Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase above Residual Fuel Oils (05.03) |
| ANSI/ASTM D 5706-1995 |
使用高频线性振荡(SRV)试验机测定润滑脂特高压性能的试验方法 |
Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine (05.03) |
| ANSI/ASTM D 5708-1996 |
用感应耦合等离子体原子发射光谱法测定原油和渣油中镍、钒和铁的试验方法 |
Test Method for Determination of Nickel, Vanadium and Iron in Crude Oils and Residual Fuels by Inductively-Coupled Plasma (ICP) Atomic Emission Spectrometry |
| ANSI/ASTM D 5709-1995 |
石油焦筛析的试验方法 |
Test Method for Sieve Analysis of Petroleum Coke (05.03) |
| ANSI/ASTM D 5740-1995 |
D 4000格式书写材料标准导则 |
Guide for Writing Material Standards in the D 4000 Format (95-1, Item 62) (08.03) |
| ANSI/ASTM D 5760-1995 |
人工传输齿轮润滑剂性能规范 |
Specification for Performance of Manual Transmission Gear Lubricants (05.03) |
| ANSI/ASTM D 5761-1997 |
多相流体废水悬浮操作规范 |
Practice for the Emulsification/Suspension of Multi-phase Fluid Waste Materials (05.03) |
| ANSI/ASTM D 5762-2001 |
通过船的进气室对石油和石油产品中氮的测定方法 |
Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet (05.03) |
| ANSI/ASTM D 5763-1995 |
通用的玻璃制品齿轮油氧化和热稳定特性的试验方法 |
Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware (05.03) |
| ANSI/ASTM D 5770-1996 |
用半定量法微观测定已用润滑油酸值的试验方法 |
Test Method for Semi-Quantitative Micro Determination of Acid Number of Used Lubricating Oils |
| ANSI/ASTM D 5771-1996 |
石油产品始凝点的试验方法.光学检测逐级降温法 |
Test Method for Cloud Point of Petroleum Products - Optical Detection Stepped Cooling Method |
| ANSI/ASTM D 5772-1996 |
石油产品始凝点的试验方法.线性冷却率法 |
Test Method for Cloud Point of Petroleum Products - Linear Cooling Rate Method |
| ANSI/ASTM D 5797-1997 |
汽车火花点火发动机用燃料甲醇(M85-M70)规范 |
Specification for Fuel Methanol (M85-M70) for Automotive Spark-Ignition Engines |
| ANSI/ASTM D 5802-1995 |
吸水纸制品吸附作用的试验方法(用重力原理测定吸附率和容量) |
Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles) |
| ANSI/ASTM D 5803-1997 |
零档上湿张力强度的试验方法(湿零档张力) |
Test Method for Wet Tensile Strength at Zero-Span (Wet Zero-Span Tensile) |
| ANSI/ASTM D 5804-1997 |
零档制动强度的试验方法(干零档张力) |
Test Methods for Zero-Span Breaking Strength (Dry Zero-Span Tensile) |
| ANSI/ASTM D 581-1989 |
液体用玻璃纤维增强型结构中使用的热固树脂的抗化学药物的测定规程 |
Determining Chemical Resistance of Thermosetting Resins Used in Glass Fiber-Reinforced Structures Intended for Liquid Service, Practice for (07.02) |
| ANSI/ASTM D 5827-1998 |
用离子色谱法测定发动机冷却剂中氯化物的试验方法 |
Test Method for Determination of Chloride in Engine Coolant by Ion Chromatography |
| ANSI/ASTM D 5828-1998 |
辅助冷却添加剂(SCAs)和发动机冷却浓缩剂兼容性的试验方法 |
Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates |
| ANSI/ASTM D 5844-1998 |
评价抑制生锈用汽车发动机油的试验方法(序列IID) |
Test Method for Evaluation of Automotive Engine Oils for Inhibition of Rusting (Sequence IID) |
| ANSI/ASTM D 5845-1996 |
用红外线光谱法测定汽油中MTBE、ETBE、TAME、DIPE、甲醇、乙醇和叔丁醇的试验方法 |
Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and Tert-Butanol in Gasoline by Infrarred Spectroscopy |
| ANSI/ASTM D 5847-2001 |
水分析标准试验方法的质量控制规范编写规则 |
Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ANSI/ASTM D 5857-2002 |
采用ISO协议和方法的聚酯塑料注入和挤压材料的规范 |
Specification for Propylene Plastic Injection and Extrusion Materials Using ISO Protocol and Methodology |
| ANSI/ASTM D 5904-2001 |
通过紫外线、过硫酸盐氧化物和薄膜电导率检测对水中全部碳、有机碳和无机碳的试验方法 |
Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection |
| ANSI/ASTM D 5907-2001 |
对水中可过滤和不可过滤物质的试验方法 |
Test Method for Filterable and Nonfilterable Matter in Water |
| ANSI/ASTM D 5926-2001 |
排水管、排废水和排气管(DWV)、下水沟、卫生设施和暴雨管道系统用聚氯乙烯垫圈的规范 |
Specification for PolyVinyl Chloride (PVC) Gaskets for Drain, Waste and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems |
| ANSI/ASTM D 5931-1998 |
用数字密度计测定发动机冷冻剂浓缩物和含水发动机冷冻剂的密度和相对密度的试验方法 |
Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter |
| ANSI/ASTM D 5934-1997 |
用三点弯曲法测定在装载控制速度下刚性和半刚性塑料样品的弹性模量的试验方法 |
Test Method for Determination of the Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three Point Bending |
| ANSI/ASTM D 5947-2001 |
固体塑料样品物理尺寸的试验方法 |
Test Methods for Physical Dimensions of Solid Plastics Specimens |
| ANSI/ASTM D 5949-2001 |
石油产品的倾点试验方法(自动压力脉冲法) |
Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) |
| ANSI/ASTM D 5950-2002 |
石油产品的倾点试验方法(自动倾斜法) |
Test Method for Pour Point of Petroleum Products (Automatic Tilt Method) |
| ANSI/ASTM D 596-2001 |
水分析报告结果的操作规程 |
Practice for Reporting Results of Analysis of Water |
| ANSI/ASTM D 5966-1999 |
评定轻型柴油发动机中滚轮从动杆防磨损用发动机油的试验方法 |
Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine |
| ANSI/ASTM D 5969-1997 |
在稀释合成海水的情况下测定润滑脂防腐蚀性能的试验方法 |
Test Method for Corrosion Preventive Properties of Lubricating Greases in the Presence of Dilute Synthetic Sea Water Environments |
| ANSI/ASTM D 5983-1997 |
汽车火花点火发动机燃料用顺向混合甲基特丁基乙醚(MTBE)规范 |
Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending with Automotive Spark Ignition Fuel |
| ANSI/ASTM D 5984-1997 |
利用显色指示剂滴定法测试石油产品碱值的半定量现场试验法的试验方法 |
(includes change in title) Test Method for Semi-Quantitative Field Test Method for Base Number in Petroleum Products by Color-Indicator Titration |
| ANSI/ASTM D 5985-2002 |
石油产品的倾点试验方法(旋转法) |
Test Method for Pour Point of Petroleum Products (Rotational Method) |
| ANSI/ASTM D 5986-1997 |
用气相色谱/傅里叶转换远红外线光谱测定用完的汽油中C8-C12芳香族和总芳香族、甲苯、苯、氧化物的试验方法 |
Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy |
| ANSI/ASTM D 5988-1997 |
测定混合后的残留塑料材料或塑料材料废物中有氧生物降解的试验方法 |
Test Method for Determining the Aerobic Biodegradation of Soil of Plastic Materials or Residual Plastic Materials After Composing |
| ANSI/ASTM D 5991-1997 |
聚乙烯对酞酰小片中聚氯乙烯杂质分离和鉴定的实施规程 |
Practice for Separation and Identification of Poly(Viny Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake |
| ANSI/ASTM D 6011-2001 |
测定声波测速计/温度计性能的试验方法 |
Test Method for Determining the Performance of a Sonic Anemometer/Therometer |
| ANSI/ASTM D 6021-1996 |
通过复合顶部空间抽提和硫特定检测的残余燃料的总硫化氢测量方法 |
Test Method for the Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection |
| ANSI/ASTM D 6022-2001 |
永久剪切稳定性指数计算的实施规范 |
Practice for the Calculation of Permanent Shear Stability Index |
| ANSI/ASTM D 6040-2001 |
非烧结的PTFE挤压膜的标准试验方法指南 |
Guide to Standard Test Methods for Unsintered Polytetrafluorethylene (PTFE) Extruded Film or Tape |
| ANSI/ASTM D 6056-2001 |
用传输电子显微镜检查法测定工作环境空气中单晶陶瓷晶须浓度的试验方法 |
Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy |
| ANSI/ASTM D 6057-2001 |
用相衬显微镜检查法测定工作环境空气中单晶陶瓷晶须浓度的试验方法 |
Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy |
| ANSI/ASTM D 6058-2001 |
测定工作环境空气中单晶陶瓷晶须浓度的实施规程 |
Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment |
| ANSI/ASTM D 6059-2001 |
用扫描电子显微镜检查法测定工作环境空气中单晶陶瓷晶须浓度的试验方法 |
Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy |
| ANSI/ASTM D 6060-2001 |
用便携式气相色层分析仪进行工艺通风孔取样的实施规程 |
Practice for Sampling of Process Vents with a Portable Gas Chromatograph |
| ANSI/ASTM D 6061-2001 |
评价呼吸式气溶胶采样器性能的实施规程 |
Practice for Evaluating the Performance of Respirable Aerosol Samplers |
| ANSI/ASTM D 6062M-2001 |
与健康有关的气溶胶成份的个人采样器的指南 |
Guide for Personal Samplers of Health-Related Aerosol Fractions (Metric) |
| ANSI/ASTM D 6064-1997 |
1,1,1,2,3,3,3-庚荧光丙烷(Cf3 chfcf3)1、Hfc-227ea规范 |
Specification for Hfc-227ea, 1, 1, 1, 2, 3, 3, 3-Heptafluoropropane (Cf3 Chfcf3)1 |
| ANSI/ASTM D 6068-1996 |
测定塑料材料的J-R弯曲的试验方法 |
Test Method for Determining J-R Curves of Plastic Materials |
| ANSI/ASTM D 6091-2001 |
可乎略校正错误的分析方法的99%95%试验室内检测评估操作规程 |
Practice for 99%/95% Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error |
| ANSI/ASTM D 6097-2001 |
固体电介绝缘材料中有孔的水柱增高的相对抗性的试验方法 |
Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials |
| ANSI/ASTM D 6098-1997 |
由聚碳酸酯制成的挤压铸模型材规范 |
Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC) |
| ANSI/ASTM D 6099-1997 |
聚氨酯原材料的试验方法:中等酸度至高酸度芳香异氰酸酯酸度的测定 |
Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates |
| ANSI/ASTM D 6100-1997 |
挤压铸模和喷射铸模乙缩醛型材规范 |
Specification for Extruded, Compression Molded and Injection Molded Acetal Shapes (Pom) |
| ANSI/ASTM D 6107-1998 |
用于照明装置的发动机冷却剂用防漏添加剂规范 |
Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service |
| ANSI/ASTM D 611-2001 |
石油产品和烃溶剂的混合苯胺点和苯胺点的试验方法 |
Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents, Method of Test for (05.01, 06.04, 10.03) |
| ANSI/ASTM D 612-1988 |
石蜡中可碳化物质的试验方法 |
Carbonizable Substances in Paraffin Wax, Method of Test for (05.01, 15.09) |
| ANSI/ASTM D 6120-1997 |
室温下阳极和阴极碳材料电阻的试验方法 |
Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature |
| ANSI/ASTM D 6122-2001 |
多变量过程红外分光光度计确认规则 |
Practice for Validation of Multivariate Process Infrared Spectrophotometers |
| ANSI/ASTM D 6129-1998 |
原子吸收光谱法测定发动机冷却剂浓缩物中硅的试验方法 |
Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy |
| ANSI/ASTM D 613-2001 |
用十六烷法对柴油机燃料引燃质量的试验方法 |
Diesel Fuels by the Cetane Method, Test for Ignition Quality of (05.04) |
| ANSI/ASTM D 6130-1998 |
感应耦合等离子-原子发散光谱法测定发动机冷却剂中硅和其它素的试验方法 |
Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ANSI/ASTM D 6139-2000 |
润滑剂或其组分需氧水生生物降解测定的标准Gledhill摇动烧瓶试验法 |
Standard Gledhill Shake Flask Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or their Components |
| ANSI/ASTM D 6176M-1997 |
用电气温度感应器测量表面大气温度的操作规程 |
Practice for Measuring Surface Atmospheric Temperature with Electrical Temperature Sensors [Metric] |
| ANSI/ASTM D 6177-1997 |
由床上用品散发的挥发性有机化学物质扩散曲线测定的操作规程 |
Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets |
| ANSI/ASTM D 6178-1997 |
由床上用品散发的挥发性有机化学物质测定的操作规程 |
Practice for Estimation of Short-Term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets |
| ANSI/ASTM D 618-1995 |
测试用电绝缘材料和调和塑料的实施规程 |
Practice for Conditioning Plastics and Electrical Insulating Materials for Testing (08.01) |
| ANSI/ASTM D 619-1994 |
电绝缘用硬化纤维的试验方法 |
Test Methods for Vulcanized Fibre Used for Electrical Insulation (10.01) |
| ANSI/ASTM D 6194-1997 |
材料的热丝点火试验方法 |
Test Method for Glow-Wire Ignition of Materials |
| ANSI/ASTM D 6196-1997 |
对空气中挥发性有机化合物的吸附剂和抽吸取样/热解吸分析过程选择的操作规程 |
Practice for Selection of Sorbents and Pumped Sampling/Thermal Desorption Analysis Procedures for Volatile Organic Compounds in Air |
| ANSI/ASTM D 6200-2001 |
冷却曲线分析法测定淬火油冷却特性的试验方法 |
Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis |
| ANSI/ASTM D 6201-1997 |
进油阀用火花点燃式发动机无铅燃料沉积物形成的功率计评定试验方法 |
Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Value Deposit Formation |
| ANSI/ASTM D 6202-1997 |
测定载有火花点燃式发动机的小轿车和轻型卡车的汽车发动机油节油效果的试验方法 |
Test Method for Measurement of the Effects of Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence via Spark Ignition Engine |
| ANSI/ASTM D 6203-1997 |
导轨润滑剂热稳定性的试验方法 |
Test Method for Thermal Stability of Way Lubricants |
| ANSI/ASTM D 6209-1997 |
大气中气态的或颗粒态的多环芳香烃测定的试验方法(用气相色谱/质谱分析在加衬吸附剂的过滤器上收集) |
Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis) |
| ANSI/ASTM D 6224-1998 |
辅助动力装置用润滑油的使用监测实施规范 |
Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment |
| ANSI/ASTM D 6239-2001 |
通过高分辨率α液体闪烁光谱测定法对饮用水中铀的试验方法 |
Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry |
| ANSI/ASTM D 6245-2001 |
用室内二氧化碳浓度法评价室内空气质量和通风的指南 |
Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation |
| ANSI/ASTM D 6246-2001 |
评价扩散采样器性能的实施规程 |
Practice for Evaluating the Performance of Diffusive Samplers |
| ANSI/ASTM D 6247-1998 |
通过X射线荧光光谱法对聚烯烃中素含量分析的试验方法 |
Test Method for Analysis of Elemental Content in Polyolefins by X-Ray Fluorescence Spectrometry |
| ANSI/ASTM D 6248-1998 |
用远红外线分光光度法对聚乙烯中横向非饱和性和乙烯的试验方法 |
Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry |
| ANSI/ASTM D 6258-1998 |
柴油燃料中溶剂红164燃料浓度测定的试验方法 |
Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels |
| ANSI/ASTM D 6259-1998 |
定量的沉积限值测定的实施规程 |
Practice for Determination of a Pooled Limit of Quantitation |
| ANSI/ASTM D 6260-1998 |
尼龙材料中碳黑的重量计测定的试验方法 |
Test Method for Gravimetric Determination of Carbon Black in Nylon Materials |
| ANSI/ASTM D 6261-1998 |
由热塑聚酯做成的挤压,压缩注模基本型材的标准规范 |
Standard Specification for Extruded, Compressed Molded Basic Shapes Made from Thermoplastic Polyester (TPES)1 |
| ANSI/ASTM D 6262-1998 |
挤压和压缩注模基本型材的标准规范 |
Standard Specification for Extruded, Compressed Molded and Injection Molded Basic Shapes of Peek (PEEK)1 |
| ANSI/ASTM D 6263-1998 |
由硬质聚乙烯和聚氯乙烯制造的挤压棍和棒的标准规范 |
Standard Specification for Extruded Rods and Bars Made from Rigid Poly(Vinyl Chloride) (PVC), and Chlorinated Poly(Vinyl Chloride) (CPVC)1 |
| ANSI/ASTM D 6265-1998 |
使用挤压机过滤器试验的聚合物污染物分离操作规程 |
Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test |
| ANSI/ASTM D 6271-1998 |
评价环境中烟草烟排放的基于茄呢醇的可吸入颗粒物的试验方法 |
Test Method for Estimating contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol |
| ANSI/ASTM D 6272-1998 |
通过四点结合对电气绝缘材料和非强化及强化塑料的柔韧特性的试验方法 |
Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending |
| ANSI/ASTM D 6277-2001 |
用中红外光谱测定法测定火花式点燃发动机燃料中苯的试验方法 |
Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid-Infrared Spectroscopy |
| ANSI/ASTM D 6289-1998 |
注模热固塑料的注模尺寸收缩测量的试验方法 |
Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics |
| ANSI/ASTM D 6290-1998 |
塑料板颜色测定的试验方法 |
Test Method for Color Determination of Plastic Pellets |
| ANSI/ASTM D 6299-1998 |
评估分析测量系统性能的应用统计质量保证实施规范 |
Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance |
| ANSI/ASTM D 6304-1998 |
利用库仑卡尔.费歇尔滴定法测定石油产品、润滑油、添加剂中水含量的试验 方法 |
Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration |
| ANSI/ASTM D 6306-2001 |
监测室内空气中气体污染物用扩散控制无源监测器的布置和使用指南 |
Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air |
| ANSI/ASTM D 6326-2001 |
U.S.系列等动力悬浮沉积物取样器的最大通过率比和深度的选择规程 |
Practice for the Selection of Maximum Transit-Rate Ratios and Depths for the U. S. Series of Isokinetic Suspended-Sediment Samplers |
| ANSI/ASTM D 6327-2001 |
通过过滤器活性取样测定室内空气中氡衰变产品浓度和工作环境等级的试验方法 |
Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter |
| ANSI/ASTM D 6328-2001 |
化学分析空气中沉积物的质量保证协议指南 |
Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric West Deposition |
| ANSI/ASTM D 6329-2001 |
确定用静态环境室评价支持微生物生长的室内物质的能力的方法指南 |
Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers |
| ANSI/ASTM D 6330-2001 |
在规定的试验条件下用小型环境试验室测定从木制板材中排放的挥发性有机物(甲醛除外)的实施规程 |
Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions |
| ANSI/ASTM D 6331-2001 |
在低浓度下测定固定源排放的颗粒物浓度的试验方法(人工重量分析法) |
Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method) |
| ANSI/ASTM D 6332-2001 |
测量一氧化碳检测器对气体和蒸气的动态反应的试验系统指南 |
Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors |
| ANSI/ASTM D 6333-2001 |
楼板中沉积的农药残留物的收集实施规程 |
Practice for Collection of Dislodgeable Pesticide Residues from Floors |
| ANSI/ASTM D 6345-2001 |
空气中挥发性有机化合物的活性、综合性取样的选择指南 |
Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air |
| ANSI/ASTM D 6348-2001 |
通过直接萃取界面傅里叶变换红外线光谱法测定气体化合物的试验方法 |
Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy |
| ANSI/ASTM D 635-1998 |
水平位置自支撑式塑料的燃烧率和/或燃烧程度与时间的试验方法 |
Test Method for Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position (08.01) |
| ANSI/ASTM D 6362-2001 |
水质分析标准物质认证规则 |
Practice for Certificates of Reference Materials for Water Analysis |
| ANSI/ASTM D 6363-2001 |
用过氧化物酶荧光法测定大气水样中过氧化氢和合成有机过氧化物的试验方法 |
Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method |
| ANSI/ASTM D 637-1990 |
平透明塑料薄板的表面不平整性的试验方法 |
Test Method for Surface Irregularities of Flat Transparent Plastic Sheets |
| ANSI/ASTM D 638-2001 |
塑料拉伸性能的试验方法 |
Test Method for Tensile Properties of Plastics (08.01) |
| ANSI/ASTM D 6394-2001 |
磺基塑料规范 |
Specification for Sulfone Plastics |
| ANSI/ASTM D 6399-2001 |
测量机舱中空气质量的仪器和方法的选择指南 |
Guide for Guide for Selecting Instruments and Methods for Measuring Air Quality in Aircraft Cabins |
| ANSI/ASTM D 6420-2001 |
用直接界面气相色谱法和质谱法测定气体有机化合物的试验方法 |
Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry |
| ANSI/ASTM D 6421-1999 |
通过对电子孔燃料注射器污渣对自动火花点火引擎燃料的试验方法 |
Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com