标准号 |
中文名称 |
英文名称 |
| ASTM D 4985-2000 |
要求预装辅助冷却添加剂(SCA)的重载工作发动机用低硅乙二醇基发动机冷却剂的标准规范 |
Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA) |
| ASTM D 4986-1998 |
泡沫聚合材料水平燃烧特性的测试方法 |
Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials |
| ASTM D 4987-1999 |
一部分连续式纸张孔眼的拉伸断裂强度的测试方法 |
Test Method for Tensile Breaking Strength of Perforations in One-Part Continuous Forms Paper |
| ASTM D 4988-1996 |
纸张中碳酸钙含量的测试方法 |
Test Method for Determination of Calcium Carbonate Content of Paper |
| ASTM D 4989-1990 |
使用平打板塑性计对沥青屋顶层表观粘度流动的试验方法 |
Test Method for the Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer |
| ASTM D 499-1969 |
白色水浮香皂 |
White Floating Toilet Soap |
| ASTM D 4990-1997 |
屋顶和防水屋顶用柏油玻璃油毡 |
Coal Tar Glass Felt Used in Roofing and Waterproofing |
| ASTM D 4991-1994 |
用真空法进行空瓶罐泄漏试验的测试方法 |
Test Method for Leakage Testing of Empty Containers by Vacuum Method |
| ASTM D 4992-1994 |
侵蚀控制用岩石的评定 |
Evaluation of Rock to be Used for Erosion Control |
| ASTM D 4993-1989 |
为反向渗透标定二氧化硅的计算和校正 |
Calculation and Adjustment of Silica (SiO2) Scaling for Reverse Osmosis |
| ASTM D 4994-1989 |
废水污垢中毒素的分离 |
Recovery of Viruses from Wastewater Sludges |
| ASTM D 4995-2000 |
1,1,2-三氯 1,2,2-三氟乙烷溶剂的脱脂等级和电子等级的标准规范 |
Standard Specifications for Electronic and Degreasing Grades of 1,1,2-Trichloro 1,2,2,-Trifluoroethane Solvent |
| ASTM D 4998-1995 |
评定牵引车液压磨损特性的试验方法 |
Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids |
| ASTM D 5-1997 |
沥青材料的渗透性试验方法 |
Test Method for Penetration of Bituminous Materials |
| ASTM D 50-1990 |
含铁和锰的黄色、橙色、红色和褐色涂料的化学分析试验方法 |
Test Methods for Chemical Analysis of Yellow, Orange, Red and Brown Pigments Containing Iron and Manganese |
| ASTM D 500-1995 |
磺化油和硫化油的化学分析和试验方法 |
Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils |
| ASTM D 5000-1989 |
使用侧流传感器对粘土中素活性的评定 |
Evaluating Activity of Clay Elements Using a Side-Stream Sensor |
| ASTM D 5001-1990 |
用球圆柱体式(BOCLE)润滑性评定仪测量航空涡轮机燃料润滑性的试验方法 |
Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE) |
| ASTM D 5002-1999 |
数字密度分析仪用原油密度和相对密度的标准试验方法 |
Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer |
| ASTM D 5003-1995 |
石油焦的哈德格罗夫可磨性指数(HGI)的测试方法 |
Test Method for the Hardgrove Grindability Index (HGI) of Petroleum Coke |
| ASTM D 5004-1989 |
用二甲苯置换法对焙烧石油焦炭真密度的测试方法 |
Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement |
| ASTM D 5006-1996 |
测量航空燃料中燃料系统结冰抑制剂(醚型)的试验方法 |
Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels |
| ASTM D 5007-1999 |
涂漆湿对干遮盖变化的试验方法 |
Test Method for Wet-to-Dry Hiding Change |
| ASTM D 5008-1997 |
用气相色谱法对2-乙基已醇纯度值和乙基甲醇戊烷含量的试验方法 |
Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol by Gas Chromatography |
| ASTM D 5009-1996 |
实验室条件下评估和比较传送效率的试验方法 |
Test Method for Evaluating and Comparing Transfer Efficiency Under Laboratory Conditions |
| ASTM D 501-1989 |
碱性洗涤剂的抽样和化学分析试验方法 |
Test Methods of Sampling and Chemical Analysis of Alkaline Detergents |
| ASTM D 5010-2001 |
印刷油墨及相关材料试验的标准指南 |
Standard Guide for Testing Printing Inks and Related Materials |
| ASTM D 5011-1992 |
使用传送标准对臭氧检测器的校验 |
Calibration of Ozone Monitors Using Transfer Standards |
| ASTM D 5012-1989 |
大气湿沉积物采集和保存使用材料的制备 |
Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition |
| ASTM D 5013-1989 |
管道和其他地点排放的废弃物的取样 |
Sampling Wastes from Pipes and Other Point Discharges |
| ASTM D 5014-1994 |
室内空气中甲醛测量的测试方法(被动式样法) |
Test Method for Measurement of Formaldehyde in Indoor Air (Passive Sampler Methodology) |
| ASTM D 5015-1995 |
大气湿沉积物的样品中PH值的电子测试方法 |
Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination |
| ASTM D 5016-1998 |
与红外线吸收法一起使用的高温试管炉燃烧法对煤和焦炭灰烬中硫的测试方法 |
Test Method for Sulfur in Ash from Coal and Coke Using High-Temperature Tube Furnace Combustion Method with Infrared Absorption |
| ASTM D 5017-1996 |
用13-碳核磁共振法测定线性低密度聚乙烯成分的试验方法 |
Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance |
| ASTM D 5018-1989 |
煤焦油和石油硬沥青剪切粘度的试验方法 |
Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches |
| ASTM D 5019-1996 |
屋顶隔层用增强非硬化聚合薄板 |
Reinforced Non-Vulcanized Polymeric Sheet Used in Roofing Membrane |
| ASTM D 502-1989 |
肥皂和其它洗涤剂粒度的试验方法 |
Test Method for Particle Size of Soaps and Other Detergents |
| ASTM D 5021-1995 |
热塑性高弹氯化乙烯混合物 |
Thermoplastic Elastomer-Chlorinated Ethylene Alloy (TECEA) |
| ASTM D 5022-1995 |
装有使用前应稀释药物浓缩溶液的玻璃瓶和小玻璃瓶的标识 |
Identification of Vials and Ampoules Containing Concentrated Solutions of Drugs to Be Diluted Before Use |
| ASTM D 5023-1999 |
用三点弯曲法测量塑料动态力学性能的试验方法 |
Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using Three Point Bending |
| ASTM D 5024-2001 |
塑料的标准试验方法:动力机械性能:压缩 |
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression |
| ASTM D 5025-1999 |
塑料材料的小刻度燃烧试验用试验室燃烧器 |
a Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials |
| ASTM D 5026-2001 |
塑料的标准试验方法:动力机械性能:拉伸 |
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension |
| ASTM D 5028-1996 |
用热分析法挤拉树脂固化性的试验方法 |
Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis |
| ASTM D 5029-1998 |
活性碳中水可溶物的试验方法 |
Test Method for Water Solubles in Activated Carbon |
| ASTM D 5030-1989 |
用测试井中水置换法对土壤和岩石密度的试验方法 |
Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit |
| ASTM D 5031-2001 |
使用封闭碳弧光灯曝露仪对涂料及有关涂层进行试验的标准实施规程 |
Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings |
| ASTM D 5032-1997 |
用甘油溶液法保持恒定相对湿度 |
Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions |
| ASTM D 5033-1990 |
有关再循环塑料恰当使用标准的制定 |
the Development of Standards Relating to the Proper Use of Recycled Plastics |
| ASTM D 5034-1995 |
纺织品的延伸和断裂力的试验方法(织物抓样强力试验) |
Test Method for Breaking Force and Elongation of Textile Fabrics (Grab Test) |
| ASTM D 5035-1995 |
纺织纤维的伸长率和断裂力的测试方法(抓损力) |
Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Force) |
| ASTM D 5036-1999 |
全粘固单层聚氯乙烯屋面板的应用 |
Application of Fully Adhered Single Ply Poly(Vinyl Chloride) Roof Sheeting |
| ASTM D 5037-1990 |
用高性能液相色谱法比较水中石油的试验方法 |
Test Method for Comparison of Waterborne Petroleum Oils by High Performance Liquid Chromatography |
| ASTM D 5038-1994 |
纺织材料的术语 |
Terminology of Textile Conservation |
| ASTM D 5039-1997 |
纸反面识别的试验方法 |
Test Methods for Identification of Wire Side of Paper |
| ASTM D 5040-1990 |
胶粘剂灰分的试验方法 |
Test Methods for Ash Content of Adhesives |
| ASTM D 5041-1998 |
胶粘剂胶粘连接开裂时断裂强度的试验方法 |
Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints |
| ASTM D 5042-1990 |
评定微粒子的阴离子交换树脂有机污染物的试验方法 |
Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins |
| ASTM D 5044-1997 |
橡胶化学制品的试验方法.苯并噻唑基二硫化物中游离2-硫醇苯并噻唑 |
Test Method for Rubber Chemicals - Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS) |
| ASTM D 5045-1999 |
塑料材料平面应变断裂韧性和应变能量释放率的试验方法 |
Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials |
| ASTM D 5046-1992 |
全交联弹性体合金 |
Fully Crosslinked Elastomeric Alloys (FCEAs) |
| ASTM D 5047-1995 |
聚对苯二甲酸乙酯薄膜和薄板 |
Polyethylene Terephthalate Film and Sheeting |
| ASTM D 5048-1997 |
利用125mm火焰测量固态塑料比较燃烧特性和抗烧穿性的试验方法 |
Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame |
| ASTM D 5049-1990 |
废弃物中氰化物筛选的试验方法 |
Test Method for the Screening of Cyanides in Waste |
| ASTM D 5050-1996 |
商业用石灰窑尘埃和硅酸盐水泥窑尘埃 |
Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts |
| ASTM D 5051-1997 |
橡胶化学制品的试验方法.苯并噻唑基二硫化物(MBTS).分析 |
Test Method for Rubber Chemicals - Benzothiazyl Disulfide (MBTS) - Assay |
| ASTM D 5052-1996 |
对皮革水蒸汽的渗透性的试验方法 |
Test Method for Permeability of Leather to Water Vapor |
| ASTM D 5053-1995 |
皮革耐破损的试验方法 |
Test Method for Resistance to Crocking of Leather |
| ASTM D 5054-1990 |
橡胶化学制品的试验方法.二苯胍(DPG)和二邻甲苯基胍(DDTG)分析 |
Test Method for Rubber Chemicals - Diphenyl Guanidine (DPG) and Di-o-tolyl-Guanidine (DOTG) Assay |
| ASTM D 5055-2000 |
预制木质I-墙筋的确定和监控结构能力的标准规范 |
Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 5056-1996 |
用原子吸收法对石油焦炭中痕量金属的试验方法 |
Test Method for Trace Metals in Petroleum Coke by Atomic Absorption |
| ASTM D 5057-1990 |
废弃物的堆积密度和筛选表观比重的试验方法 |
Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste |
| ASTM D 5058-1990 |
废弃物的筛选分析兼容性的试验方法 |
Test Methods for Compatibility of Screening Analysis of Waste |
| ASTM D 5059-1998 |
X射线分光光度法对汽油中铅含量的试验方法 |
Test Methods for Lead in Gasoline by X-Ray Spectroscopy |
| ASTM D 5060-1995 |
用气相色谱法测定高纯度乙苯中杂质的测试方法 |
Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography |
| ASTM D 5061-1992 |
在冶金焦中用显微术测定组织成分体积百分比的测试方法 |
Test Method for Microscopical Determination of Volume Percent of Textural Components in Metallurgical Coke |
| ASTM D 5062-1996 |
树脂溶液稀释度的试验方法 |
Test Method for Resin Solution Dilutability |
| ASTM D 5064-2001 |
为评定涂料的可混用性进行碎屑试验的标准方法 |
Standard Practice for Conducting a Patch Test to Assess Coating Compatibility |
| ASTM D 5065-2001 |
钢表面老化涂层条件评定的标准指南 |
Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces |
| ASTM D 5066-1991 |
在喷涂汽车涂料的生产条件下测定转换效率的试验方法 |
Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints - Weight Basis |
| ASTM D 5067-1999 |
艺术家用的水彩涂料的标准规范 |
Standard Specification for Artists Watercolor Paints |
| ASTM D 5068-1992 |
评定用漆刷的制备 |
Preparation of Paint Brushes for Evaluation |
| ASTM D 5069-1992 |
评定用漆滚子覆层的制备 |
Preparation of Paint-Roller Covers for Evaluation |
| ASTM D 5070-1990 |
用电位测量滴定法对纺织品软化剂中合成季铵盐的试验方法 |
Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners by Potentiometric Titrations |
| ASTM D 5071-1999 |
可光降解塑料曝光用且有水操作的氙弧型曝光仪的标准实施规程 |
Standard Practice for Operating Xenon ARC-Type Exposure Apparatus with Water for Exposure of Photodegradable Plastics |
| ASTM D 5072-1998 |
饮用水中氡的测试方法 |
test Method for Radon in Drinking Water |
| ASTM D 5073-1990 |
地表水深度的测量 |
Depth Measurement of Surface Water |
| ASTM D 5074-1990 |
用部分萃取法大量和微量无机成分分析的天然杂矿石沉淀物标样的制备 |
Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures |
| ASTM D 5075-1996 |
室内空气中烟碱的测试方法 |
Test Method for Nicotine in Indoor Air |
| ASTM D 5076-1990 |
屋顶层和防水膜中孔隙的测试方法 |
Test Method for Measuring Voids in Roofing and Waterproofing Membranes |
| ASTM D 5077-1990 |
有关静电放电包装材料的名词术语 |
Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials |
| ASTM D 5078-1995 |
沥青混凝土和普通水泥凝固敷设的路面用加热粉碎注料器 |
Crack Filler, Hot-Applied for Asphalt Concrete and Portland Cement Concrete Pavements |
| ASTM D 5079-1990 |
保存和运输岩芯样品 |
Preserving and Transporting Rock Core Samples |
| ASTM D 5080-2000 |
百分比压缩的快速测量的标准试验方法 |
Standard Test Method for Rapid Determination of Percent Compaction |
| ASTM D 5081-1990 |
集料层遮盖性的试验方法 |
Test Method for Aggregate Layer Hiding Power |
| ASTM D 5082-1999 |
间歇接触聚氯乙烯屋顶的应用标准规程 |
Standard Practice for the Application of Intermittently Attached Poly(Vinyl Chloride) Sheet Roofing |
| ASTM D 5083-1996 |
用直边样品对热固增强塑料的拉伸特性的试验方法 |
Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens |
| ASTM D 5084-1990 |
使用挠性壁渗透计测量饱和渗透性材料水压传导率的试验方法 |
Test Method for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter |
| ASTM D 5085-1995 |
用化学抑制离子色谱法测定在大气作用下潮湿沉积物中氯化物,硝酸盐,硫酸盐含量的测试方法 |
Test Method for the Determination of Chloride, Nitrate and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography |
| ASTM D 5086-2001 |
用火焰原子吸收分光光度法测定大气作用下湿沉积物中钙、镁、钾和钠含量的标准试验方法 |
Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry |
| ASTM D 5087-2002 |
测定含溶剂汽车涂层释放的和在挥发有机化合物控制装置中可除去的挥发有机化合物总量的标准试验方法 |
Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
| ASTM D 5088-1990 |
在非放射性废弃物场地上用现场设备的净化 |
Decontamination of Field Equipment Used at Nonradioactive Waste Sites |
| ASTM D 5089-1995 |
有电磁电流仪的明渠水流速度测量的试验方法 |
Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters |
| ASTM D 5103-2001 |
人造短纤维长度和长度分配的标准试验方法(单纤维试验) |
Standard Test Method for Length and Length Distribution of Manufactured Staple Fibers (Single-Fiber Test) |
| ASTM D 5104-1996 |
纺织纤维收缩的标准测试方法(单纤维试验) |
Standard Test Method for Shrinkage of Textile Fibers (Single-Fiber Test) |
| ASTM D 5105-1994 |
用浓聚的自然光进行压敏带的加速室外风蚀 |
Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight |
| ASTM D 5106-1999 |
沥青筑路混合物用炼钢炉渣集料 |
Steel Slag Aggregates for Bituminous Paving Mixtures |
| ASTM D 5107-1990 |
建筑用砂岩表面清理标准的制定 |
Standarad Preparatory Surface Cleaning of Architectural Sandstone |
| ASTM D 5108-1990 |
海水中防污涂层体系有机物扩散速度的测试方法 |
Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water |
| ASTM D 5109-1999 |
印刷线路板用铜覆层热固层压材料的标准试验方法 |
Standard Test Methods for Copper-Clad Thermosetting Laminates for Printed Wiring Boards |
| ASTM D 511-1993 |
水中钙镁离子的测试方法 |
Test Methods for Calcium and Magnesium in Water |
| ASTM D 5110-1998 |
使用紫外光度法的臭氧转变标准的认证和臭氧监测器的校准 |
Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry |
| ASTM D 5111-1999 |
非都市地区监测大气沉积物的选址和取样方法的标准指南 |
Standard Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations |
| ASTM D 5112-1998 |
振动用试验方法(水平方向正弦运动) |
Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products |
| ASTM D 5113-1997 |
硬质细胞聚苯乙烯泡沫塑料上测定胶粘剂化学浸蚀的试验方法 |
Test Method for Determining Adhesive Attack on Rigid Cellular Polystyrene Foam |
| ASTM D 5114-1990 |
机械浮选机中煤的实验室试验泡沫浮选的试验方法 |
Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell |
| ASTM D 5115-1990 |
测定RDF的燃料质量和采集大量样品的试验方法 |
Test Method for Collecting Gross Samples and Determining the Fuel Quality of RDF |
| ASTM D 5116-1997 |
小型环境室室内装修材料/产品有机物排放量测定的标准导则 |
Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products |
| ASTM D 5117-1996 |
固体玻璃纤维增强(pultruded)器材染料穿透性的试验方法 |
Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock |
| ASTM D 5118/D 5118M-1995 |
船舶包皮用纤维板的制造 |
Fabrication of Fiberboard Shipping Boxes |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com