标准号 |
中文名称 |
英文名称 |
ASTM D 5119-1997 |
CRC L-38火花点燃式发动机中评定汽车发动机油的试验方法 |
Test Method for Evaluation of Automotive Engine Oils in the CRC L-38 Spark-Ignition Engine |
ASTM D 512-1989 |
测定水中氯离子含量的试验方法 |
Test Methods for Chloride Ion in Water |
ASTM D 5120-1990 |
活性污泥处理中微生物培养时抑止呼吸的试验方法 |
Test Method for Inhibition of Respiration in Microbial Cultures in the Activated Sludge Process |
ASTM D 5121-1990 |
耐久性检验用石板的制备 |
Preparation of Rock Slabs for Durability Testing |
ASTM D 5124-1996 |
木材及木制品模拟中随机标准号发动机的使用和检验 |
Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation |
ASTM D 5125-1997 |
用ISO流量杯法对涂料及有关材料粘度的试验方法 |
Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups |
ASTM D 5126-1990 |
测定流区中测定液体传导指数现场比较法 |
Comparison of Field Methods for Determining Hydraulic Conductivity in the Vadose Zone |
ASTM D 5127-1999 |
导电级水 |
Electronic Grade Water |
ASTM D 5128-1990 |
根据PH值测量低导电水的试验方法 |
Test Method for On-Line pH Measurement of Water of Low Conductivity |
ASTM D 5129-1995 |
使用收缩宽度法迂回测量明渠水流流量的试验方法 |
Test Method for Open Channel Flow Measurement of Water Indirectly by Using Width Contractions |
ASTM D 513-1992 |
水中二氧化碳溶解量和总量的试验方法 |
Test Methods for Total and Dissolved Carbon Dioxide in Water |
ASTM D 5130-1995 |
使用比降面积法迂回测量明渠水流流量的试验方法 |
Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method |
ASTM D 5131-1990 |
电渗析/逆电渗析体系记录的保管 |
Record Keeping for Electrodialysis/ Electrodialysis Reversal Systems |
ASTM D 5132-1993 |
机动车宿营舱中用的柔性泡沫和橡胶材料的横向燃烧速率的测试方法 |
Test Method for Horizontal Burning Rate of Flexible Cellular and Rubber Materials Used in Occupant Compartments of Motor Vehicles |
ASTM D 5133-2001 |
温度扫描技术测试润滑油的低温、低剪切率、粘性/温度依赖性的标准试验方法 |
Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique |
ASTM D 5134-1998 |
用毛细管气相色谱法详细分析石脑油穿透n壬烷的试验方法 |
Test Method for Detailed Analysis of Petroleum Naphthas Through n-Nonane by Capillary Gas Chromatography |
ASTM D 5135-1995 |
用毛细管气相色谱法分析苯乙烯的测试方法 |
Test Method for Analysis of Styrene by Capillary Gas Chromatography |
ASTM D 5136-2000 |
高纯度p二甲苯 |
High Purity p-Xylene |
ASTM D 5137-2001 |
乙酸己脂的标准规范 |
Standard Specification for Hexyl Acetate |
ASTM D 5138-1999 |
液晶高聚物 |
Liquid Crystal Polymers |
ASTM D 5139-1990 |
核电厂对涂层定量检查用的样品制备 |
Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants |
ASTM D 514-1985 |
测定水中氢氧离子含量的试验方法 |
Test Method for Hydroxide Ion in Water |
ASTM D 5140-1995 |
用聚氨酯就地浇铸热粹材料的检验 |
Testing Polyurethane Poured in Place Thermal Break Materials |
ASTM D 5141-1996 |
使用特定场地土壤的淤泥栅栏用土工织物的筛选效益和流动率的试验方法 |
Test Method for Determining Filtering Efficiency and Flow Rate of a Geotextile for Silt Fence Application Using Site-Specific Soil |
ASTM D 5142-1990 |
使用仪器测量法测定煤和焦炭样品分析的近似分析试验方法 |
Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures |
ASTM D 5143-1990 |
用高性能液相色谱法对土壤中硝化菌和硝酸盐炸药分析的试验方法 |
Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography |
ASTM D 5144-2000 |
核发电厂保护涂料标准使用的标准指南 |
Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants |
ASTM D 5145-1990 |
电泳涂漆液非挥发物质和颜料含量的试验方法 |
Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths |
ASTM D 5146-1998 |
建筑涂料溶剂试验指南 |
Guide to Testing Solvent-Borne Architectural Coatings |
ASTM D 5147-1997 |
改良沥青薄板材抽样和检验的试验方法 |
Test Methods for Sampling and Testing Modified Bituminous Sheet Material |
ASTM D 5147a-2001 |
改良沥青薄板材抽样和检验的标准试验方法 |
Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material |
ASTM D 5148-1997 |
离心机煤油当量的试验方法 |
Test Method for Centrifuge Kerosine Equivalent |
ASTM D 5149-1995 |
大气臭氧浓度的测试方法:化学发光乙烯的连续测量 |
Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence |
ASTM D 515-1988 |
测定水中磷含量的试验方法 |
Test Methods for Phosphorus in Water |
ASTM D 5150-1992 |
建筑涂料用滚子遮盖率的试验方法 |
Test Method for Hiding Power of Architectural Paints Applied by Roller |
ASTM D 5151-1999 |
医用手套漏孔检测的试验方法 |
Test Method for Detection of Holes in Medical Gloves |
ASTM D 5153-1991 |
用原子吸收法催化剂分子筛选催化剂中钯的测试方法 |
Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption |
ASTM D 5154-1991 |
用微动性试验法测定液体催化分解催化剂的活动性和选择性的试验方法 |
Test Method for Determining the Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test |
ASTM D 5155-1996 |
聚氨酯原材料的试验方法:芳香族异氰酸酯中异氰酸酯含量的测定 |
Test Method for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates |
ASTM D 5156-1995 |
周围环境,工作地点及室内空气中臭氧连续测量的试验方法 |
Test Methods for Continuous Measurement of Ozone in Ambient, Workplace and Indoor Atmospheres (Ultraviolet Absorption) |
ASTM D 5157-1997 |
室内空气质量模型统计计算 |
Statistical Evaluation of Indoor Air Quality Models |
ASTM D 5158-1998 |
粉末活性碳粒径测定的试验方法 |
Test Method for Determination of the Particle Size of Powdered Activated Carbon |
ASTM D 5159-1991 |
粒状活性碳粉化磨损的试验方法 |
Test Method for Dusting Attrition of Granular Activated Carbon |
ASTM D 516-1990 |
水中硫酸铁的试验方法 |
Test Method for Sulfate Ion in Water |
ASTM D 5160-1995 |
活性碳气相吸收检验法 |
Gas-Phase Adsorption Testing of Activated Carbon |
ASTM D 5161-1996 |
涂料和内衬工作(金属衬里)的特定检验要求 |
Specifying Inspection Requirements for Coating and Lining Work (Metal Substrates) |
ASTM D 5162-2001 |
金属衬底上非传导保护涂料的间断性(假期)检验标准实施规程 |
Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates |
ASTM D 5163-1991 |
建立核电厂时有关涂料安全性能监督管理程序的制定 |
Establishing Procedures to Monitor the Performance of Safety Related Coatings in an Operating Nuclear Power Plant |
ASTM D 5164-1991 |
丙二醇和二丙基丙二醇 |
Propylene Glycol and Dipropylene Glycol |
ASTM D 5165-1993 |
用树脂锅实验室制备胶凝载体的标准规范 |
Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle |
ASTM D 5166-1997 |
使用微波炉的加胶载色剂样品的实验室制备 |
Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven |
ASTM D 5167-1991 |
鉴定用热用接缝及断开密封胶和填充物的溶化 |
Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation |
ASTM D 5168-1998 |
三层波纹状纤维板容器的制造和封闭 |
Fabrication and Closure of Triple Wall Corrugated Fiberboard Containers |
ASTM D 5169-1998 |
钩状和环状连接紧固件的剪切强度的试验方法(动态法) |
Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners |
ASTM D 517-1998 |
沥青厚板材 |
Asphalt Plank |
ASTM D 5170-1998 |
钩状和环状连接紧固件的坯料剥离强度的试验方法(T方法) |
Test Method for Peel Strength (T Method) of Hook and Loop Touch Fasteners |
ASTM D 5171-2000 |
塑料熔合法兰按扭耐冲击的标准试验方法 |
Standard Test Method for Impact Resistance of Plastic Sew-Through Flange Buttons |
ASTM D 5172-1991 |
为水质分析操作程序提供资料 |
Documenting the Operating Procedures Used for the Analysis of Water |
ASTM D 5173-1997 |
水中碳化合物的联机监视的试验方法 |
Test Method for On-Line Monitoring of Carbon Compounds in Water |
ASTM D 5174-1997 |
用脉冲激光磷光光度法测定水中痕量铀的试验方法 |
Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry |
ASTM D 5175-1991 |
用微量萃取和气相色谱法对水中有机卤化农药和多氯联苯的试验方法 |
Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography |
ASTM D 5176-1991 |
用热分解和化学发光检测法对水中总化学键合氮的试验方法 |
Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection |
ASTM D 5177-1991 |
危险废弃物焚烧炉废弃物容纳量 |
Waste Acceptance at Hazardous Waste Incinerators |
ASTM D 5178-1998 |
有机覆层耐损伤的试验方法 |
Test Method for Mar Resistance of Organic Coatings |
ASTM D 5179-1998 |
用直接抗拉试验测定有机涂层对塑料基质的粘着力的标准试验方法 |
Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing |
ASTM D 518-1999 |
橡胶变质的试验方法.表面龟裂 |
Test Method for Rubber Deterioration - Surface Cracking |
ASTM D 5180-1993 |
清洁液体混浊度定量检测的试验方法 |
Test Method for Quantitative Test for Turbidity in Clear Liquids |
ASTM D 5181-1991 |
用GA-CAT综合磨损试验机测定印刷物耐磨损的试验方法 |
Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester |
ASTM D 5182-1997 |
评定油磨损荷载能力的试验方法 |
Test Method for Evaluating the Scuffing (Scoring) Load Capacity of Oils |
ASTM D 5183-1995 |
用四球磨损试验机测定润滑剂磨擦系数的测试方法 |
Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine |
ASTM D 5184-2001 |
通过灰化、熔融、感应耦合等离子体原子放射分光光度法和原子吸收分光光谱法测定燃料油中铝和硅的标准试验方法 |
Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry |
ASTM D 5185-2002 |
感应耦合等离子体原子发射光谱法测定原油中的所选素以及已用润滑油中的附加素、耐磨金属和杂质的标准试验方法 |
Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
ASTM D 5186-1999 |
用超临界流体色谱法测定柴油中芳香族化合物含量的试验方法 |
Test Method for Determination of Aromatic Content of Diesel Fuels by Supercritical Fluid Chromatography |
ASTM D 5187-1991 |
用X射线衍射法测定焙烧石油焦结晶大小的试验方法 |
Test Method for Determination of Crystallite Size (Lc) of Calcined Petroleum Coke by X-Ray Diffraction |
ASTM D 5188-1999 |
测定燃料汽液比温度的试验方法(真空室法) |
Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method) |
ASTM D 519-1990 |
羊毛条中纤维长度的试验方法 |
Test Method for Length of Fiber in Wool Top |
ASTM D 5190-2001 |
石油产品蒸气压力的标准试验方法(自动方法) |
Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method) |
ASTM D 5191-2001 |
石油产品蒸气压力的标准试验方法(小型法) |
Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) |
ASTM D 5192-1999 |
芯中煤样品的收集 |
Collection of Coal Samples from Core |
ASTM D 5193/D 5193M-1993 |
涂层织物的试验方法.空气保持性 |
Test Method for Coated Fabrics - Air Retention |
ASTM D 5194-1996 |
液体芳香烃中微量氯化物的试验方法 |
Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons |
ASTM D 5195-1991 |
用核子法测量在地深表层土壤和岩石密度的试验方法 |
Test Method for Density of Soil and Rock In-Place at Depths Below the Surface by Nuclear Methods |
ASTM D 5196-1991 |
生物医学级水 |
Biomedical Grade Water |
ASTM D 5197-1997 |
测定中甲醛和其他羟基化合物的试验方法 |
Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology) |
ASTM D 5198-1992 |
固体废弃物的硝酸处理 |
Nitric Acid Digestion of Solid Waste |
ASTM D 5199-2001 |
测量土工织物和地膜标定厚度的标准试验方法 |
Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
ASTM D 520-2000 |
锌粉颜料标准规范 |
Standard Specification for Zinc Dust Pigment |
ASTM D 5200-1992 |
气溶胶瓶中测定索勒温特-玻蒽(SOLEVENT-BORN)涂料挥发性物质重量百分比的试验方法 |
Test Method for Determination of Weight Percent Volatile Content Of Solevent-Borne Paints in Aerosol Cans |
ASTM D 5201-1997 |
计算公式化表述的清漆和涂料物理恒量的标准操作规程 |
Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings |
ASTM D 5202-1991 |
测定化学压力灌浆土壤三轴向压缩蠕变强度的试验方法 |
Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils |
ASTM D 5203-1998 |
从消费后回收物中提取聚乙烯塑料模塑和挤压材料 |
Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources |
ASTM D 5204-2001 |
聚酰胺-酰亚胺铸模和挤压材料的标准分类体系 |
Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials |
ASTM D 5205-1996 |
聚醚酰亚胺(PEI)材料的分类体系 |
Classification System for Polyetherimide (PEI) Materials |
ASTM D 5206-1996 |
硬质聚氯乙烯挡板耐风荷载的试验方法 |
Test Method for Windload Resistance of Rigid Poly(Vinyl Chloride) (PVC) Siding |
ASTM D 5207-1998 |
塑料材料上小型燃烧用20mm和125mm试验火焰的校正 |
Calibration of 20 and 125 mm Test Flames for Small-Scale Burning Tests on Plastic Materials |
ASTM D 5208-2001 |
照相级塑料制品的荧光紫外线曝光的标准实施规范 |
Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics |
ASTM D 5209-1992 |
测定市政污秽沉积物现场的塑料材料需养生物降解作用的试验方法 |
Test Method for Determining the Aerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge |
ASTM D 521-2002 |
锌粉尘(金属锌粉)的化学分析标准试验方法 |
Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder) |
ASTM D 5210-1992 |
测定市政污秽沉积物现场的塑料材料厌养生物降解作用的试验方法 |
Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge |
ASTM D 5211-2001 |
对-二甲苯原料用二甲苯的标准规范 |
Standard Specification for Xylenes for p-Xylene Feedstock |
ASTM D 5212-1991 |
桥及其结构用高荷载旋转生产弹性承载物 |
High Load Rotational Confined Elastomeric Bearings for Bridges and Structures |
ASTM D 5213-1999 |
电绝缘和电介质用聚酰亚胺树脂薄膜 |
Polyimide Resin Film for Electrical Insulation and Dielectric Applications |
ASTM D 5215-1993 |
乙烯类制品铺地板用胶粘剂着色的仪器评定的试验方法 |
Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives |
ASTM D 5216-1995 |
汽车和轻骑用丙二醇基发动机冷却剂 |
Propylene Glycol Base Engine Coolant for Automobile and Light Duty Service |
ASTM D 5217-1991 |
微粒离子交换材料污染和降解的检测 |
Detection of Fouling and Degradation of Particulate Ion Exchange Materials |
ASTM D 5219-1999 |
服装量度用与人体尺寸相关的标准术语 |
Standard Terminology Relating to Body Dimensions for Apparel Sizing |
ASTM D 522-1993 |
用锥形心轴仪测定涂覆有机涂层延伸率的试验方法 |
Test Methods for Mandrel Bend Test of Attached Organic Coatings |
ASTM D 5220-1992 |
用中子深探针法对地表土壤和岩石中含水量的试验方法 |
Test Method for Water Content of Soil and Rock In-Place by the Neutron Depth Probe Method |
ASTM D 5221-1992 |
空气中甲醛连续测量的试验方法 |
Test Method for Continuous Measurement of Formaldehyde in Air |
ASTM D 5222-1992 |
石油起源高燃点电绝缘油 |
High Fire-Point Electrical Insulating Oils of Petroleum Origin |
ASTM D 5223-1998 |
引擎冷却剂级丙烯乙二醇规范 |
Engine Coolant Grade Propylene Glycol |
ASTM D 5224-1993 |
热固模制合成材料的压力成行试样 |
Compression Molding Test Specimens of Thermosetting Molding Compounds |
ASTM D 5225-1998 |
差示粘度计测量高聚物溶液粘度的试验方法 |
Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer |
ASTM D 5226-1998 |
溶解高聚物材料 |
Dissolving Polymer Materials |
ASTM D 5227-2001 |
测量聚烯烃可提取正乙烷含量的标准试验方法 |
Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins |
ASTM D 5228-1992 |
测定活性碳丁烷工作能力的试验方法 |
Test Method for Determination of the Butane Working Capacity of Activated Carbon |
ASTM D 5229/D 5229M-1992 |
高聚物基体合成材料水分吸收性能和评衡条件的试验方法 |
Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials |
ASTM D 523-1989 |
镜面光泽的试验方法 |
Test Method for Specular Gloss |
ASTM D 5230-2000 |
炭黑的标准试验方法.自动形成单个颗粒的破碎强度 |
Standard Test Method for Carbon Black-Automated Individual Pellet Hardness |
ASTM D 5231-1992 |
测定未加工的城市固体废弃物成分的试验方法 |
Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste |