标准号 |
中文名称 |
英文名称 |
| ASTM D 4388-1997 |
非金属半导电性及电绝缘橡胶带 |
Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes |
| ASTM D 4389-1999 |
精制玻璃粗纱纺织品规格 |
Finished Glass Fabrics Woven from Rovings |
| ASTM D 4391-1993 |
纺织品燃烧特性名词术语 |
Terminology Relating to the Burning Behavior of Textiles |
| ASTM D 4393-2000 |
橡胶化合物增强绳或织物搭接脱落粘合力的标准试验方法 |
Standard Test Method for Strap Peel Adhesion of Reinforcing Cords or Fabrics to Rubber Compounds |
| ASTM D 4394-1984 |
用刚性板负荷法测定岩石质量(重量)现场变形模数的试验方法 |
Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using the Rigid Plate Loading Method |
| ASTM D 4395-1984 |
用挠性板负荷法测定岩石质量(重量)现场变形模数的试验方法 |
Test Method for Determining the In Situ Modulus of Deformation of Rock Mass Using the Flexible Plate Loading Method |
| ASTM D 4396-1999 |
无压管制品用硬质聚氯乙烯和有关塑料化合物 |
Rigid Poly(Vinyl Chloride) (PVC) and Related Plastic Compounds for Nonpressure Piping Products |
| ASTM D 4397-1996 |
建筑、工业和农业用聚乙烯薄板 |
Polyethylene Sheeting for Construction, Industrial and Agricultural Applications |
| ASTM D 4398-1995 |
板单面曝光法测定玻璃纤维增强热固树脂的耐化学性的试验方法 |
Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure |
| ASTM D 4399-1990 |
电涂镀槽导电性的试验方法 |
Test Method for Measuring Electrical Conductivity of Electrocoat Baths |
| ASTM D 440-1986 |
煤的跌落粉碎试验 |
Drop Shatter Test for Coal |
| ASTM D 4400-1999 |
多切口涂板器对涂料抗下垂的试验方法 |
Test Method for Sag Resistance of Paints Using a Multinotch Applicator |
| ASTM D 4401-1984 |
用彼德森抓斗采样器采集底栖大型无脊椎动物 |
Collecting Benthic Macroinvertebrates with Petersen Grab Sampler |
| ASTM D 4402-1987 |
使用布鲁克菲尔德Thermosel仪测定非填充沥青粘度的试验方法 |
Test Method for Viscosity Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus |
| ASTM D 4403-1984 |
岩石用变形计 |
Extensometers Used in Rock |
| ASTM D 4404-1984 |
用水银注入岩孔率计测定土壤和岩石孔隙容积与孔隙容积分布的试验方法 |
Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry |
| ASTM D 4405-1993 |
单轴向压缩中圆柱形岩芯样品蠕变的试验方法 |
Test Method for Creep of Cylindrical Soft Rock Core Specimens in Uniaxial Compressions |
| ASTM D 4406-1993 |
三轴向压缩中圆柱形岩芯样品蠕变的试验方法 |
Test Method for Creep of Cylindrical Rock Core Specimens in Triaxial Compression |
| ASTM D 4407-1984 |
用橙皮抓斗采样器采集底栖大型无脊椎动物 |
Collecting Benthic Macroinvertebrates with Orange Peel Grab Sampler |
| ASTM D 4409-1995 |
用旋转体流速计测量明渠中水的流速的方法 |
Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters |
| ASTM D 441-1986 |
煤的滚筒试验 |
Tumbler Test for Coal |
| ASTM D 4410-1998 |
河流沉积物术语 |
Terminology for Fluvial Sediment |
| ASTM D 4411-1998 |
河流沉积物的抽样 |
Sampling Fluvial Sediment in Motion |
| ASTM D 4412-1984 |
水和水形成沉积物中硫酸盐还原菌的试验方法 |
Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits |
| ASTM D 4413-1998 |
工作场所空气中确定氧化乙烯的试验方法 |
Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (Charcoal Tube Methodology) |
| ASTM D 4414-1995 |
缺口量规测定湿膜厚度 |
Measurement of Wet Film Thickness by Notch Gages |
| ASTM D 4415-1991 |
测定丙烯酸中二聚物的试验方法 |
Test Methods for Determination of Dimer in Acrylic Acid |
| ASTM D 4416-1989 |
丙烯酸 |
Acrylic Acid |
| ASTM D 4417-1993 |
缺口量规测定有机涂层湿膜厚度的方法 |
Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel |
| ASTM D 4418-1988 |
燃气轮机用燃料的验收、贮存和搬运 |
Receipt, Storage and Handling of Fuels for Gas Turbines |
| ASTM D 4419-1990 |
差示扫描量热法(DSC)测量石油蜡转变温度的试验方法 |
Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC) |
| ASTM D 4420-1994 |
气相色谱法测定成品汽油中芳轻的试验方法 |
Test Method for Aromatics in Finished Gasoline by Gas Chromatography |
| ASTM D 4421-1994 |
石油焦炭中挥发物质的试验方法 |
Test Method for Volatile Matter in Petroleum Coke |
| ASTM D 4422-1994 |
石油焦炭分析中灰分的试验方法 |
Test Method for Ash in the Analysis of Petroleum Coke |
| ASTM D 4423-1991 |
C4烃中羰基的测定方法 |
Standard Test Method for Determination of Carbonyls In C4 Hydrocarbons |
| ASTM D 4424-1990 |
气相色谱法分析丁烯的试验方法 |
Test Method for Butylene Analysis by Gas Chromatography |
| ASTM D 4425-1997 |
离心法从润滑脂中分离油的试验方法(科佩斯法) |
Test Method for Oil Separation from Lubricating Grease by Centrifuging (Koppers Method) |
| ASTM D 4426-2001 |
木材层压板用液态酚醛树脂中非挥发物含量百分比测定的标准试验方法 |
Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating |
| ASTM D 4427-1992 |
通过实验室试验对泥炭样品进行分类 |
Classification of Peat Samples by Laboratory Testing |
| ASTM D 4428/D 4428M-1991 |
孔间地震探测试验方法 |
Test Methods for Crosshole Seismic Testing |
| ASTM D 4429-1993 |
现场测定土壤承重比率的方法 |
Test Method for Bearing Ratio of Soils in Place |
| ASTM D 4430-1984 |
气象测量的运算可比性的测定 |
Determining the Operational Comparability of Meteorological Measurements |
| ASTM D 4431-1992 |
工业和公共机构用纸巾 |
Paper Towels for Industrial and Institutional Use |
| ASTM D 4432-1998 |
计算机连续打印用纸 |
Papers Used in Continuous Computer Printout Forms |
| ASTM D 4433-1984 |
抗燃处理的纸和纸板 |
Flame-Resistant Treated Paper and Paperboard |
| ASTM D 4434-1996 |
聚氯乙烯屋面板 |
Poly(Vinyl Chloride) Sheet Roofing |
| ASTM D 4435-1984 |
岩石锚栓拉力试验方法 |
Rock Bolt Anchor Pull Test |
| ASTM D 4436-1984 |
岩石锚栓长期负载保持力试验方法 |
Rock Bolt Long-Term Load Retention Test |
| ASTM D 4438-1985 |
电子计数法对催化材料的粒度分布的试验方法 |
Test Method for Particle Size Distribution of Catalytic Material by Electronic Counting |
| ASTM D 4439-2000 |
土工织物的标准术语 |
Standard Terminology for Geosynthetics |
| ASTM D 444-1988 |
锌黄颜料(铬酸锌黄)的化学分析方法 |
Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow) |
| ASTM D 4440-2001 |
塑料的标准试验方法:动力机械性能:熔体流变学 |
Standard Test Method for Plastics: Dynamic Mechanical Properties: Melt Rheology |
| ASTM D 4441-1998 |
聚四氟乙烯的水分散 |
Aqueous Dispersions of Polytetrafluoroethylene |
| ASTM D 4442-1992 |
木材和木基材料含水量的直接测量用试验方法 |
Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM D 4443-1995 |
用液面气体色层分离法测定氯乙烯均聚物和共聚物中的十亿分之一级残余氯乙烯单体含量的分析方法 |
Test Method for Analysis for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography |
| ASTM D 4444-1992 |
手提式湿度计的使用和校准用试验方法 |
Test Methods for Use and Calibration of Hand-Held Moisture Meters |
| ASTM D 4445-1991 |
控制未处理木材的变色和形状用杀菌剂的试验方法(实验室法) |
Testing Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method) |
| ASTM D 4446-1984 |
暴露在液态水环境下未处理木材的膨胀差和防水配方的抗膨胀效率的试验方法 |
Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments |
| ASTM D 4447-1984 |
实验室化学药品和样品的配置 |
Disposal of Laboratory Chemicals and Samples |
| ASTM D 4448-2001 |
地下水位监测井采样标准指南 |
Standard Guide for Sampling Ground-Water Monitoring Wells |
| ASTM D 4449-1990 |
类似外表的表面之间不同光泽的目视评定方法 |
Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance |
| ASTM D 445-2001 |
透明和不透明液体运动粘度的标准试验方法(包括动态粘度的计算) |
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity) |
| ASTM D 4450-1985 |
羟基亚磷酸锌颜料的分析试验方法 |
Test Method for Analysis of Zinc Hydroxy Phosphite Pigment |
| ASTM D 4451-2002 |
低温灰化法测定涂料中颜料含量的标准试验方法 |
Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing |
| ASTM D 4452-1985 |
土壤样品的X射线照相法 |
X-Ray Radiography of Soil Samples |
| ASTM D 4453-1991 |
超纯水样品的搬运 |
Handling of Ultra-Pure Water Samples |
| ASTM D 4454-1985 |
用显微镜进行水生系统中细菌总量和(呼吸时)呼出的细菌的同步计数试验方法 |
Test Method for Simultaneous Enumeration of Total and Respiring Bacteria in Aquatic Systems by Microscopy |
| ASTM D 4455-1985 |
按荧光显微镜计算程序进行水生菌计数的试验方法 |
Test Method for Enumeration of Aquatic Bacteria by Epifluorescence Microscopy Counting Procedure |
| ASTM D 4456-1999 |
粉末状离子交换树脂的物理和化学特性的试验方法 |
Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins |
| ASTM D 4457-2002 |
直接注入气相色谱仪法测定涂料及涂层中二氯甲烷和1,1,1-三氯乙烷的标准试验方法 |
Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph |
| ASTM D 4458-1994 |
微咸水,海水及盐水中氯化物离子的测试方法 |
Test Method for Chloride Ions in Brackish Water, Seawater and Brines |
| ASTM D 4459-1999 |
室内使用的塑料曝光用加速耐光性氙弧型(水冷式)曝光装置的操作 |
Operating an Accelerated Lightfastness Xenon-Arc-Type (Water Cooled) Light-Exposure Apparatus for the Exposure of Plastics for Indoor Applications |
| ASTM D 446-1997 |
玻璃毛细管运动粘度计的操作说明和规范 |
Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers |
| ASTM D 4460-1997 |
计算已由其他试验方法计算出的值的精确极限值 |
Calculating Precision Limits Where Values Are Calculated from Other Test Methods |
| ASTM D 4462-1985 |
羟基亚硫酸锌颜料 |
Zinc Hydroxy Phosphite Pigment |
| ASTM D 4463-1996 |
淡水分裂催化剂的蒸汽去活化作用 |
Steam Deactivation of Fresh Fluid Cracking Catalysts |
| ASTM D 4464-2000 |
激光散射测定催化材料粒度分布的标准试验方法 |
Standard Test Method for Particle Size Distribution of Catalytic Material by Laser Light Scattering |
| ASTM D 4465-1997 |
粗蓝斜纹布工装裤用拉链的标准性能规范 |
Standard Performance Specification for Zippers for Denim Dungarees |
| ASTM D 4466-1994 |
多成分纺织品名词术语 |
Terminology for Multicomponent Textile Fibers |
| ASTM D 4467-1994 |
获得非正式分布数据的纺织品试验方法的实验室间试验规程 |
Interlaboratory Testing of a Textile Test Method That Produces Non-Normally Distributed Data |
| ASTM D 4468-1985 |
用还原法和比色法对气体燃料中总硫含量的试验方法 |
Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry |
| ASTM D 4469-2001 |
用沥青铺面混合料中的集料计算沥青吸收率的标准试验方法 |
Standard Test Method for Calculating Percent Asphalt Absorption by the Aggregate in an Asphalt Pavement Mixture |
| ASTM D 4470-1997 |
静电起电的试验方法 |
Test Method for Static Electrification |
| ASTM D 4471-2000 |
直接滴定法测定甲苯基酸中吡淀碱的试验方法 |
Test Method for Pyridine Bases in Cresylic Acid by Direct Titration |
| ASTM D 4472-1989 |
反渗透系统的记录保持 |
Recordkeeping for Reverse Osmosis Systems |
| ASTM D 4473-2001 |
塑料的标准试验方法:动力机械性能:固化特性 |
Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior |
| ASTM D 4474-1996 |
苯乙烯热塑性弹性体注模料和挤压料 |
Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES) |
| ASTM D 4475-1996 |
用短梁法对挤拔增强塑料棒表观水平剪切强度的试验方法 |
Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods by the Short-Beam Method |
| ASTM D 4476-1997 |
纤维增强挤拔塑料棒弯曲性能的试验方法 |
Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods |
| ASTM D 4477-1996 |
硬质聚氯乙烯拱腹标准规范 |
Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit |
| ASTM D 4479-2000 |
无石棉沥青屋面覆层的标准规范 |
Standard Specification for Asphalt Roof Coatings - Asbestos-Free |
| ASTM D 448-1998 |
道路和桥梁建筑用集料尺寸的分类 |
Classification for Sizes of Aggregate for Road and Bridge Construction |
| ASTM D 4480-1993 |
用风向标和旋转风速表等工具测量地面风的方法 |
Test Method for Measuring Surface Wind by Means of Wind Vanes and Rotating Anemometers |
| ASTM D 4481-1997 |
活性铝基催化剂中总镍含量的试验方法 |
Test Method for Total Nickel in Fresh Alumina-Base Catalysts |
| ASTM D 4482-1999 |
橡胶特性的试验方法.伸展周期疲劳试验 |
Test Method for Rubber Property-Extension Cycling Fatigue |
| ASTM D 4483-1999 |
橡胶和碳黑工业中试验方法标准的精确度测定 |
Determining Precision for Test Method Standards in the Rubber and Carbon Black Industries |
| ASTM D 4485a-2001 |
引擎油性能的标准规范 |
Standard Specification for Performance of Engine Oils |
| ASTM D 4486-1991 |
挥发性和活性液体运动粘度的试验方法 |
Test Method for Kinematic Viscosity of Volatile and Reactive Liquids |
| ASTM D 4487-1990 |
硼硅酸钙分析用试验方法 |
Test Methods for Analysis of Calcium Borosilicate |
| ASTM D 4488-1995 |
弹性地板材和可洗墙用的产品清洗特性试验指南 |
Testing Cleaning Performance of Products Intended for Use on Resilient Flooring and Washable Walls |
| ASTM D 4489-1995 |
漂浮油的抽样 |
Sampling of Waterborne Oils |
| ASTM D 449-1989 |
防潮和防水用沥青规范 |
Asphalt Used in Dampproofing and Waterproofing |
| ASTM D 4490-1996 |
用检测器管测量有毒气体或蒸气的浓度 |
Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes |
| ASTM D 4491-1999 |
通过介电常数测试水工织物水渗透性的标准试验方法 |
Standard Test Methods for Water Permeability of Geotextiles by Permittivity |
| ASTM D 4492-1998 |
气相色谱法分析苯的试验方法 |
Test Method for Analysis of Benzene by Gas Chromatography |
| ASTM D 4493-1994 |
4,4-二酚基丙烷(双酚A)的凝固点的试验方法 |
Test Method for Solidification Point of 4,4-Isopropylidenediphenol (Bisphenol A) |
| ASTM D 4494-1995 |
检测干洗级全氯乙烯中残余气味的测试方法 |
Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene |
| ASTM D 4495-1995 |
落锤法对硬质聚氯乙烯型材耐冲击性的试验方法 |
Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight |
| ASTM D 4496-1987 |
中等导电材料直流阻抗或导电性的试验方法 |
Test Method for D-C Resistance or Conductance of Moderately Conductive Materials |
| ASTM D 4497-1994 |
热熔胶粘剂断开时间的测定方法(手工法) |
Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method) |
| ASTM D 4498-2000 |
热熔胶粘剂剪切试验中热断裂温度的标准试验方法 |
Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives |
| ASTM D 4499-1995 |
热熔胶粘剂的热稳定性的试验方法 |
Test Method for Heat Stability of Hot-Melt Adhesives |
| ASTM D 450-1996 |
铺屋面,防潮与防水用硬煤沥青 |
Coal-Tar Pitch Used in Roofing, Dampproofing and Waterproofing |
| ASTM D 4500-1995 |
测定水基胶粘剂中的粗砂岩、硬块或不溶物的试验方法 |
Test Method for Determining Grit, Lumps or Undissolved Matter in Water-Borne Adhesives |
| ASTM D 4501-2001 |
整体剪切方法对刚性基片间胶粘剂剪切强度的标准试验方法 |
Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method |
| ASTM D 4502-1992 |
木材粘结接头的耐热和耐水性试验方法 |
Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints |
| ASTM D 4503-1986 |
用偏硼酸锂熔化法对固体废弃物的溶解的测试方法 |
Dissolution of Solid Waste by Lithium Metaborate Fusion |
| ASTM D 4504-1994 |
工业运输用模制聚乙烯开口桶 |
Molded Polyethylene Open-Head-Pails for Industrial Shipping |
| ASTM D 4505-1996 |
延长使用寿命的预制塑料路面标志带 |
Preformed Plastic Pavement Marking Tape for Extended Service Life |
| ASTM D 4505a-2001 |
延长使用寿命的预制反光路面标志带的标准规范 |
Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com