标准号 |
中文名称 |
英文名称 |
| ANSI/ASTM E 310-1996 |
锡青铜铸件用参考射线照相 |
Reference Radiographs for Tin Bronze Castings |
| ANSI/ASTM E 317-1996 |
不使用电子测量仪的超声波脉冲回音系统的性能特征评估的实施规程 |
Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Systems Without the Use of Electronic Measurement Instruments |
| ANSI/ASTM E 329-2002 |
从事建筑材料试验和/或检验的机构的规范 |
Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction |
| ANSI/ASTM E 330-1996 |
通过均一静态空气压差测定外窗、窗帘墙和门结构性能的试验方法 |
Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference (04.11) |
| ANSI/ASTM E 331-1996 |
通过均一静态空气压差测定门、窗帘墙、外窗水渗透的试验方法 |
Test Method for Water Penetration of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference (04.11) |
| ANSI/ASTM E 336-1997 |
建筑物中隔音性能的测量试验方法 |
Test Method for Measurement of Airborne Sound Insulation In Buildings |
| ANSI/ASTM E 376-1996 |
用磁场或涡流(电磁的)试验法测量覆层厚度的实施规程 |
Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Test Methods |
| ANSI/ASTM E 390-2001 |
钢熔焊接的参考射线摄影 |
Reference Radiographs for Steel Fusion Welds |
| ANSI/ASTM E 405-1989 |
窗磨损试验旋转操作的试验方法 |
Test Methods for Wear Testing Rotary Operations for Windows (04.11) |
| ANSI/ASTM E 424-2002 |
片材的太阳能量传输性和反射性(陆地上)的试验方法 |
Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials |
| ANSI/ASTM E 427-1996 |
用卤素检漏器(碱离子二极管)测试泄漏的实施规程 |
Practice for Testing for Leaks Using the Halogen Leak Detector (Alkali-Ion Diode) |
| ANSI/ASTM E 428-1996 |
超声波检验用钢标准块的制造和管理实施规程 |
Practice for Fabrication and Control of Steel Reference Blocks Used in Ultrasonic Inspection |
| ANSI/ASTM E 431-1996 |
半导体及有关器件的射线照相的说明指南 |
Guide to Interpretation of Radiographs of Semiconductors and Related Devices |
| ANSI/ASTM E 432-1997 |
渗漏试验方法的选择指南 |
Guide for Selection of a Leak Testing Method |
| ANSI/ASTM E 433-1997 |
液体渗透检查用参考射线照片 |
Reference Photographs for Liquid Penetrant Inspection |
| ANSI/ASTM E 437-1997 |
工业用金属丝布及筛(方孔系列)规范 |
Specification for Industrial Wire Cloth and Screens (Square Opening Series) |
| ANSI/ASTM E 446-1996 |
钢铸件厚度在2 in(51mm)以下用基准射线照相 |
Reference Radiographs for Steel Castings up to 2 in. (51 mm) in Thickness |
| ANSI/ASTM E 455-1976 |
建筑物屋顶隔板构建或成形楼板的静态负载试验方法 |
Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings (04.11) |
| ANSI/ASTM E 479-1996 |
泄漏试验规范的制定指南 |
Guide for Preparation of a Leak Testing Specification |
| ANSI/ASTM E 488-1996 |
混凝土制成的锚及砖石工程构件的强度的试验方法 |
Test Methods for Strength of Anchors in Concrete and Masonry Elements (04.11) |
| ANSI/ASTM E 493-1997 |
在外流试验法中用质谱仪检漏器检漏的试验方法 |
Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode |
| ANSI/ASTM E 494-1995 |
材料中测量超声速度的操作规程 |
Practice for Measuring Ultrasonic Velocity in Materials |
| ANSI/ASTM E 498-1996 |
在示踪探针法中用质谱仪检漏器或残余气体分析器检漏的试验方法 |
Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode |
| ANSI/ASTM E 499-1996 |
在探测器探针法中用质谱仪检漏器检漏的试验方法 |
Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode |
| ANSI/ASTM E 505-2001 |
铝镁压模铸造检验的参考射线摄影 |
Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings |
| ANSI/ASTM E 515-1996 |
用气泡发射技术检漏的试验方法 |
Test Method for Leaks Using Bubble Emission Techniques |
| ANSI/ASTM E 527-1996 |
金属及合金标准号的实施规程 |
Practice for Numbering Metals and Alloys (Uns) |
| ANSI/ASTM E 529-1994 |
建筑结构用横梁的传导挠曲试验指南 |
Guide for Conducting Flexural Tests on Beams and Girders for Building Construction (04.11) |
| ANSI/ASTM E 541-2002 |
从事建造建筑物的系统分析和符合性保证的机构的准则 |
Criteria for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building |
| ANSI/ASTM E 543-2002 |
对执行无损检验的机构评价规程 |
Practice for Evaluating Agencies that Perform Nondestructive Testing |
| ANSI/ASTM E 545-1997 |
测定直接热中子射线照相检验中成像质量的方法 |
Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination |
| ANSI/ASTM E 546-1988 |
密封绝缘玻璃部件熔点试验方法 |
Test Method for Frost Point of Sealed Insulating Glass Units (04.11) |
| ANSI/ASTM E 547-1996 |
通过循环静态空气压差测定门、窗帘墙和外窗水渗透的试验方法 |
Test Method for Water Penetration of Exterior Windows, Curtain Walls, and Doors by Cyclic Static Air Pressure Differential (04.11) |
| ANSI/ASTM E 548-1996 |
用于评定实验室资格的一般准则指南 |
Guide for General Criteria Used for Evaluating Laboratory Competence |
| ANSI/ASTM E 564-1995 |
建筑构架墙剪切抗性静态承载的试验方法 |
Method of Static Load Test for Shear Resistance of Framed Walls for Buildings (04.11) |
| ANSI/ASTM E 569-1997 |
受控激励时结构件声发射监测的实施规范 |
Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation |
| ANSI/ASTM E 570-1997 |
铁磁钢管形制品的磁力泄漏检验实施规范 |
Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products |
| ANSI/ASTM E 575-1983 |
报告建筑物结构、构件、连接件和组件的结构测试数据的实施规程 |
Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies (04.11) |
| ANSI/ASTM E 576-1988 |
垂直位置密封绝缘玻璃部件熔点试验方法 |
Test Method for Frost Point of Sealed Insulating Glass Units in the Vertical Position (04.11) |
| ANSI/ASTM E 577-1985 |
直线建筑部件和系统的尺寸协调指南 |
Guide for Dimensional Coordination of Rectilinear Building Parts and Systems (04.11) |
| ANSI/ASTM E 584-1996 |
制订用来帮助实施国家能源计划的ASTM自愿一致标准的推荐指南 |
Recommended Guide for Developing the (ASTM) Voluntary Consensus Standards Required to Help Implement the National Energy Plan |
| ANSI/ASTM E 587-1996 |
用触点法作超声波斜束检验的实施规程 |
Practice for Ultrasonic Angle-Beam Examination by the Contact Method |
| ANSI/ASTM E 5870-1997 |
计算塑料特性保留指数的实施规程 |
Practice for Calculating the Property Retention Index of Plastics |
| ANSI/ASTM E 596-1997 |
隔音室减少噪音的实验室测量的试验方法 |
Test Method for Laboratory Measurement of the Noise Reduction of Sound-Isolating Enclosures |
| ANSI/ASTM E 603-2001 |
室内燃烧实验指南 |
Guide for Room Fire Experiments |
| ANSI/ASTM E 605-1993 |
建筑部件适用的喷射耐火材料厚度和密度的试验方法 |
Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members (04.11) |
| ANSI/ASTM E 618-1996 |
用自动切丝机/自动轧棒机评定黑色金属的机械加工性能的方法 |
Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine |
| ANSI/ASTM E 621-1994 |
建筑设计和结构中米制单位的使用的实施规程 |
Practice for Use of Metric (SI) Units in Building Design and Construction (04.11) |
| ANSI/ASTM E 631-1993 |
建筑物建设术语 |
Terminology of Building Construction (04.11) |
| ANSI/ASTM E 651-2002 |
对从事建造建筑物的系统分析和符合性保证的机构的能力评价导则 |
Guidelines for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building |
| ANSI/ASTM E 661-1988 |
集中静荷载和冲击负荷下木材和木基楼板及屋顶覆层的性能试验方法 |
Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads (04.11) |
| ANSI/ASTM E 662-2001 |
通过固体材料对烟雾产生的特定视觉密度的试验方法 |
Test Method For Specific Optical Density Of Smoke Generated By Solid Materials |
| ANSI/ASTM E 664-1996 |
用浸渍法测量纵向超声波的表面衰减的实施规程 |
Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonicwaves by Immersion Method |
| ANSI/ASTM E 689-1996 |
球墨铁铸件的参考射线照相 |
Reference Radiographs for Ductile Iron Castings |
| ANSI/ASTM E 69-1996 |
用火管式装置测定经过处理的木材燃烧特性的试验方法 |
Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus |
| ANSI/ASTM E 691-1999 |
为测定试验方法精密度开展的实验室间研究的实施规范 |
Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ANSI/ASTM E 695-1979 |
墙、楼板和屋顶结构的相对抗冲击负荷的测量方法 |
Method for Measuring Relative Resistance of Wall, Floor, and Roof Constructions to Impact Loading (04.11) |
| ANSI/ASTM E 703-1996 |
有色金属的电磁(涡流)分类实施规范 |
Practice for Electromagnetic (Eddy-Current) Sorting of Nonferrous Metals |
| ANSI/ASTM E 709-2001 |
磁粉检验指南 |
Guide for Magnetic Particle Examination |
| ANSI/ASTM E 713-1988 |
建筑绘图中米制标度的选择指南 |
Guide for Selection of Scales for Metric Building Drawings (04.11) |
| ANSI/ASTM E 72-1995 |
建筑结构踏板传导强度的试验方法 |
Methods of Conducting Strength Tests of Panels for Building Construction (04.11) |
| ANSI/ASTM E 73-1983 |
构架组件静态承载测试实施规范 |
Practice for Static Load Testing of Truss Assemblies (04.11) |
| ANSI/ASTM E 736-1992 |
建筑部件适用的喷射耐火材料内聚性/粘合性的试验方法 |
Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members (04.11) |
| ANSI/ASTM E 741-1995 |
示踪气体稀释方法测定单区带空气变化的试验方法 |
Test Methods for Determining Air Change in a Single Zone by Means of Tracer Gas Dilution (04.11) |
| ANSI/ASTM E 746-2002 |
工业射线摄影胶片相关图像质量特性曲线测定的试验方法 |
Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film |
| ANSI/ASTM E 747-1997 |
辐射摄影术用金属线图像质量指示器的设计、制造和材料组分类实施规范 |
Practice for Design, Manufacture, and Material Grouping Classification of Wire Image Quality Indicators (Iqi) Used for Radiology |
| ANSI/ASTM E 748-1996 |
材料的热中子射线照相术规程 |
Practices for Thermal Neutron Radiography of Materials |
| ANSI/ASTM E 749-2001 |
在连续焊接时声音散发检测操作规程 |
Practice for Acoustic Emission Monitoring During Continuous Welding |
| ANSI/ASTM E 750-1996 |
声发射仪器的表征实施规范 |
Practice for Characterizing Acoustic Emission Instrumentation |
| ANSI/ASTM E 751-2001 |
在阻点焊接时声音散发检测的操作规程 |
Practice for Acoustic Emission Monitoring During Resistance Spot-Welding |
| ANSI/ASTM E 754-1980 |
埋入砖石灰缝中的拉杆和锚的拔拉阻力的试验方法 |
Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints (04.11) |
| ANSI/ASTM E 759-1992 |
建筑部件适用的喷射耐火材料偏转效果的试验方法 |
Test Method for Effect of Deflection of Sprayed Fire-Resistive Material Applied to Structural Members (04.11) |
| ANSI/ASTM E 760-1992 |
冲击对结构构件上喷涂防火材料粘着力影响的试验方法 |
Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members (04.11) |
| ANSI/ASTM E 761-1992 |
建筑部件适用的喷射耐火材料压缩强度的试验方法 |
Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members (04.11) |
| ANSI/ASTM E 773-1988 |
密封绝缘玻璃组件密封持久性的试验方法 |
Test Method for Seal Durability of Sealed Insulating Glass Units (04.11) |
| ANSI/ASTM E 774-1992 |
密封绝缘玻璃部件规范 |
Specification for Sealed Insulating Glass Units (04.11) |
| ANSI/ASTM E 779-1987 |
用风扇增压法测定空气泄漏率的试验方法 |
Test Method for Determining Air Leakage Rate by Fan Pressurization (04.11) |
| ANSI/ASTM E 783-1993 |
安装的外窗和门的空气泄漏现场测量的试验方法 |
Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors (04.11) |
| ANSI/ASTM E 792-1995 |
临床实验室信息管理系统的选择指南 |
Selection of a Clinical Laboratory Information Management System, Guide for (14.01) |
| ANSI/ASTM E 797-1996 |
用手动超声脉冲回波接触法测量厚度的实施规范 |
Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method |
| ANSI/ASTM E 800-2001 |
着火期间存在或产生的气体测量指南 |
Guide For Measurement Of Gases Present Or Generated During Fires |
| ANSI/ASTM E 801-2001 |
电子装置的放射性检测的质量控制操作规程 |
Practice for Controlling Quality of Radiological Examination of Electronic Devices |
| ANSI/ASTM E 802-1996 |
厚度4 1/2英寸(114mm)的灰口铸铁件用基准射线照相 |
Reference Radiographs for Gray Iron Castings up to 4 1/2 in. (114 mm) in Thickness |
| ANSI/ASTM E 803-1996 |
中子射线照相束长度直径比测定法 |
Method for Determining the L D Ratio of Neutron Radiography Beams |
| ANSI/ASTM E 833-1997 |
建筑功效学的术语 |
Terminology of Building Ergonomics (04.07) |
| ANSI/ASTM E 835-1993 |
石膏和混凝土砖石构件的模数协调指南 |
Guide for Modular Coordination of Clay and Concrete Masonry Units (04.11) |
| ANSI/ASTM E 837-2001 |
采用钻孔应变测量法测定剩余应力的试验方法 |
Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method |
| ANSI/ASTM E 864-1996 |
多孔防护板粘结铝合金表面制备规程 |
Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels (04.11) |
| ANSI/ASTM E 865-1995 |
多孔夹板用结构膜粘结剂规范 |
Specification for Structural Film Adhesives for Honeycomb Sandwich Panels (04.11) |
| ANSI/ASTM E 866-1996 |
黏结在多孔防护板的铝合金防腐粘结底层涂料规范 |
Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to be Adhesively Bonded in Honeycomb Shelter Panels (04.11) |
| ANSI/ASTM E 874-1996 |
防护板用非金属蜂窝芯子铝饰面粘接的实施规程 |
Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels (04.11) |
| ANSI/ASTM E 894-1988 |
建筑物护栏和永久金属护栏系统用锚固装置的试验方法 |
Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings (04.11) |
| ANSI/ASTM E 90-1997 |
建筑物隔墙和构件的气载噪声传输损耗的实验室测量的试验方法 |
Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partions and Elements |
| ANSI/ASTM E 907-1996 |
现场测量沥青组合屋面和钢板刚性绝缘屋面系统的耐上升性的试验方法 |
Test Method for Field Testing Uplift Resistance of Roofing Systems Employing Steel Deck Rigid Insulation and Bituminous Built-Up Roofing (04.07) |
| ANSI/ASTM E 908-1996 |
校准气体基准泄漏规程 |
Practice for Calibrating Gaseous Reference Leaks |
| ANSI/ASTM E 917-1994 |
测定建筑物和建筑系统使用期成本的实施规程 |
Practice for Measuring Life-Cycle Costs of Buildings and Building Systems (04.11) |
| ANSI/ASTM E 935-1993 |
建筑物护栏和永久金属护栏系统性能的试验方法 |
Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings (04.11) |
| ANSI/ASTM E 936-1996 |
使用预成形屋面绝缘钢铺面和沥青组合屋面的屋面系统组件实施规程 |
Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing (04.11) |
| ANSI/ASTM E 937-1993 |
建筑组件适用的喷射耐火材料(SFRM)钢材腐蚀的试验方法 |
Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members (04.11) |
| ANSI/ASTM E 957-1995 |
地热能的相关术语 |
Terminology Relating to Geothermal Energy |
| ANSI/ASTM E 964-1993 |
测算建筑物和建筑系统收支比率和节约投资比率的实施规范 |
Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems (04.11) |
| ANSI/ASTM E 977-1996 |
导电材料的热电分类实施规范 |
Practice for Thermoelectric Sorting of Electrically Conductive Materials |
| ANSI/ASTM E 985-1996 |
建筑物护栏和永久金属护栏系统的规范 |
Specification for Permanent Metal Railing Systems and Rails for Buildings (04.11) |
| ANSI/ASTM E 987-1988 |
门窗产品玻璃卸去力的试验方法 |
Test Methods for Deglazing Force of Fenestration Products (04.11) |
| ANSI/ASTM E 990-1993 |
蜂窝状夹层遮蔽板用芯层拼接粘结剂规范 |
Specification for Core-Splice Adhesive for Honeycomb Sandwich Shelter Panels (04.11) |
| ANSI/ASTM E 994-1996 |
实验室认可制度校正和试验的操作和认可指南 |
Guide for Calibration and Testing Laboratory Accreditation Systems General Requirements for Operation and Recognition |
| ANSI/ASTM E 997-1984 |
用破坏法测定均匀静载荷影响下外窗玻璃、隔墙和门的结构性能的试验方法 |
Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors under the Influence of Uniform Static Loads by Destructive Methods (04.11) |
| ANSI/ASTM E 998-1984 |
用无损试验法测定在均匀静态承载影响下窗户、幕墙和门上玻璃的结构性能的方法 |
Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors under the Influence of Uniform Static Loads by Nondestructive Method (04.11) |
| ANSI/ASTM E 999-1996 |
工业射线照相胶片冲洗的质量控制指南 |
Guide for Controlling the Quality of Industrial Radiographic Film Processing |
| ANSI/ASTM E1026-2004 |
弗里克基准剂量测定系统的实施规程 |
|
| ANSI/ASTM E1074-2004 |
测算建筑物和建筑系统投资的净收益的实施规程 |
|
| ANSI/ASTM E108-2004 |
屋顶层着火试验的试验方法 |
|
| ANSI/ASTM E108-2004 |
屋顶层着火试验的试验方法 |
|
| ANSI/ASTM E1091-2003 |
防护板用非金属夹心板规范 |
(Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels ) |
| ANSI/ASTM E1121-2002 |
建筑物和建筑系统投资回收率的测算实施规程 |
(Practice for Measuring Payback for Investments in Buildings and Building Systems (04.11) ) |
| ANSI/ASTM E1169-2002 |
坚固性试验指南 |
(Guide for Conducting Ruggedness Tests ) |
| ANSI/ASTM E1171-2002 |
在循环温度和湿度环境下光伏模块的试验方法 |
(Test Method for Photovoltaic Modules in Cyclic Temperature and Humidity Environments ) |
| ANSI/ASTM E1185-2002 |
建筑物和建筑系统投资评估用经济方法的选择指南 |
(Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems (04.11) ) |
| ANSI/ASTM E1186-2003 |
建筑物外层和空气隔离系统漏气的现场检测实施规程 |
(Practices for Air Leakage Site Detection in Building Envelopes and Air Retarder Systems ) |
| ANSI/ASTM E1204-2004 |
食品加工用γ辐射设备的剂量测量实施规范 |
|
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com