标准号 |
中文名称 |
英文名称 |
ASTM D 3731-1987 |
地表水中藻类叶绿素含量的测量 |
Measurement of Chlorophyll Content of Algae in Surface Waters |
ASTM D 3732-1982 |
紫外线固化涂料固化时间的报告 |
Reporting Cure Times of Ultraviolet-Cured Coatings |
ASTM D 3733-1993 |
原子吸收光谱法测定硅氧烷聚合物和硅氧烷改性的醇酸树脂中硅含量的试验方法 |
Test Method for Silicon Content of Silicone Polymers and Silicon-Modified Alkyds by Atomic Absorption |
ASTM D 3734-2001 |
高闪点芳烃石脑油的标准规范 |
Standard Specification for High-Flash Aromatic Naphthas |
ASTM D 3735-1996 |
VM&P石油脑 |
VM&P Naphthas |
ASTM D 3737-2001 |
确定结构级胶合叠板允许特性的标准实施规程 |
Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
ASTM D 3737b-2001 |
确定结构级胶合叠板容许特性的标准操作规程 |
Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
ASTM D 3738-1984 |
医院用上胶床单 |
Rubber-Coated Cloth Hospital Sheeting |
ASTM D 3739-1994 |
反渗透用估算和校正Langclier饱和指数的规格 |
Calculation and Adjustment of the Langelier Saturation Index for Reverse Osmosis |
ASTM D 374-1999 |
固体电绝缘材料厚度的试验方法 |
Test Methods for Thickness of Solid Electrical Insulation |
ASTM D 3740-2001 |
工程设计及建筑中使用的土壤和岩石在试验和/或检查中所用试剂最低要求的标准实施规程 |
Standard Practice for Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction |
ASTM D 3741-2000 |
含卤化有机溶剂的掺和物外观的标准试验方法 |
Standard Test Methods for Appearance of Admixtures Containing Halogenated Organic Solvents |
ASTM D 3742-1998 |
1,1,1-三氯乙烷含量的试验方法 |
Test Method for 1,1,1-Trichloroethane Content |
ASTM D 3743-1984 |
桥面和桥墩防护的相关命名的定义 |
Definitions of Terms Relating to Bridge Deck and Substructure Protection |
ASTM D 3744-1997 |
集料耐久性指数的测试方法 |
Test Method for Aggregate Durability Index |
ASTM D 3745-1995 |
预制的池,塘,渠,沟用衬里(暴露型)安装实施方法 |
Installation of Prefabricated Asphalt Reservoir, Pond, Canal and Ditch Liner (Exposed Type) |
ASTM D 3746-1985 |
屋顶沥青抗冲击力的试验方法 |
Test Method for Impact Resistance of Bituminous Roofing Systems |
ASTM D 3747-1979 |
粘合屋顶绝缘用乳化沥青粘合剂 |
Emulsified Asphalt Adhesive for Adhering Roof Insulation |
ASTM D 3748-1998 |
高密度硬性多孔热固塑料评价 |
Evaluating High-Density Rigid Cellular Thermoplastics |
ASTM D 3749-1995 |
用气体色谱液筒底间隙技术测定聚氯乙烯均聚物树脂中残余氯乙烯单体的试验方法 |
Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique |
ASTM D 374M-1999 |
固体电绝缘材料厚度的标准试验方法(米制) |
Standard Test Methods for Thickness of Solid Electrical Insulation (Metric) |
ASTM D 375-1995 |
石棉粗砂的标准规范 |
Standard Specification for Asbestos Roving |
ASTM D 3751-1994 |
家具抛光剂的评定 |
Evaluation of Furniture Polish |
ASTM D 3752-1998 |
水泥体中石棉强度的试验方法 |
Test Method for Strength Imparted by Asbestos to a Cementitious Matrix |
ASTM D 3753-1999 |
玻璃纤维增强聚酯人孔的标准规范 |
Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells |
ASTM D 3754-2001 |
玻璃纤维增强热固树脂污水压力管和工业压力管的标准规范 |
Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe |
ASTM D 3755-1997 |
在直流电压作用下固体电绝缘材料的介电击穿电压及介电强度的试验方法 |
Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress |
ASTM D 3756-1997 |
使用分散电场法对固体介电材料抗树枝状电击穿性的试验方法 |
Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields |
ASTM D 3757-1989 |
溶剂型地板抛光剂的制备规格 |
Preparing Specifications for Solvent Floor Polishes |
ASTM D 3758-1995 |
在试验地板上喷洒浅黄色颜料的评定方法 |
Evaluation of Spray-Buff Products on Test Floors |
ASTM D 3759-1996 |
压合胶带的张力强度和延伸率的试验方法 |
Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes |
ASTM D 3759/D 3759M-1996 |
压敏胶纸带抗拉强度和弹性的标准试验方法 |
Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes |
ASTM D 3759M-1996 |
压合胶带的抗拉强度和延伸率的试验方法(米制) |
Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes (Metric) |
ASTM D 3760-2002 |
用气相色谱法分析异丙苯的标准试验方法 |
Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography |
ASTM D 3761-1996 |
用氧弹燃烧/离子选择电极法测定煤中总氟含量的试验方法 |
Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method |
ASTM D 3762-1998 |
用胶粘剂粘结的铝表面耐久性的试验方法(楔入试验) |
Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test) |
ASTM D 3763-1995 |
用载荷和位移探测器测试硬质塑料的高速穿孔特性的试验方法 |
Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors |
ASTM D 3764-1992 |
过程流量分析仪的确认 |
Validation of Process Stream Analyzers |
ASTM D 3765-1999 |
碳黑-十六烷基三甲溴化铵表面积的试验方法 |
Test Method for Carbon Black - CTAB (Cetyltrimethylammonium Bromide) Surface Area |
ASTM D 3766-1986 |
催化剂和催化作用的相关术语 |
Terminology Relating to Catalysts and Catalysis |
ASTM D 3767-2001 |
橡胶尺寸的测量的标准操作规程 |
Standard Practice for Rubber-Measurement of Dimensions |
ASTM D 3768-1996 |
微孔氨基甲酸乙酯挠曲恢复性试验 |
Testing Microcellular Urethanes - Flexural Recovery |
ASTM D 3769-1996 |
微孔氨基甲酸乙酯高温垂弛度的测试 |
Testing Microcellular Urethanes - High-Temperature Sag |
ASTM D 3771-2000 |
聚集型太阳能集热器用橡胶密封件的标准规范 |
Standard Specification for Rubber Seals Used in Concentrating Solar Collectors |
ASTM D 3772-2001 |
橡胶指套标准规范 |
Standard Specification for Rubber Finger Cots |
ASTM D 3773-1990 |
纺织品长度的试验方法 |
Test Methods for Length of Woven Fabric |
ASTM D 3774-1996 |
纺织品宽度的试验方法 |
Test Methods for Width of Woven Fabric |
ASTM D 3775-1998 |
纺织品织物结构计算的试验方法 |
Test Method for Fabric Count of Woven Fabric |
ASTM D 3776-1996 |
纺织品单位面积(重量)质量的试验方法 |
Test Methods for Mass Per Unit Area (Weight) of Woven Fabric |
ASTM D 3777-1997 |
纺织品记录规范 |
Writing Specifications for Textiles |
ASTM D 3778-1995 |
妇女及女孩做节日礼服用可干洗机织物的性能规格 |
Performance Specification for Womens and Girls Drycleanable Woven Dress Coat Fabrics |
ASTM D 3779-1995 |
妇女及女孩用机织雨衣与适合各种用途的防水上胶织物的性能规格 |
Performance Specification for Womens and Girls Woven Rainwear and All-Purpose, Water-Repellent Coat Fabrics |
ASTM D 378-2000 |
橡胶(弹性)扁平传送带的标准试验方法 |
Standard Test Methods for Rubber (Elastomeric) Belting, Flat Type |
ASTM D 3780-1995 |
男人及男孩用机织夜礼服织物及机织运动夹克,运动裤及裤子织物的性能规格 |
Performance Specification for Mens and Boys Woven Dress Suit Fabrics and Woven Sportswear Jacket, Slack and Trouser Fabrics |
ASTM D 3781-1995 |
男人及男孩用针织雨衣和各种用途防水上胶织物的性能规格 |
Performance Specification for Mens and Boys Knitted Rainwear and All-Purpose, Water-Repellent Coat Fabrics |
ASTM D 3782-1995 |
男人及男孩用针织运动夹克,运动裤及裤子织物的性能规格 |
Performance Specification for Mens and Boys Knitted Dress Suit Fabrics and Knitted Sportswear Jacket, Slack and Trouser Fabrics |
ASTM D 3783-1995 |
男人及男孩衣服用机织平纹衬里织物的性能规格 |
Performance Specification for Woven Flat Lining Fabrics for Mens and Boys Apparel |
ASTM D 3784-1995 |
男人及男孩用机织浴衣及睡衣织物的标准性能规范 |
Standard Performance Specification for Mens and Boys Woven Bathrobe and Dressing Gown Fabrics |
ASTM D 3785-1995 |
机织领带及围巾织物的性能规格 |
Performance Specification for Woven Necktie and Scarf Fabrics |
ASTM D 3788-1989 |
家用喷漆罐喷射方向标示的规定 |
Practice to Indicate Direction of Spray from a Can of Consumer Spray Paint |
ASTM D 3789-1979 |
家用喷漆罐贴实用标签 |
Pracitice for Labeling Cans of Consumer Spray Paint |
ASTM D 3790-1979 |
用烘干箱烘干皮革中易挥发物质(水份)的试验方法 |
Test Method for Volatile Matter (Moisture) of Leather by Oven Drying |
ASTM D 3791-1996 |
热对沥青影响的评价 |
Evaluating the Effects of Heat on Asphalts |
ASTM D 3792-1999 |
用直接注入式样气相色谱仪法测定水稀释涂料中水含量的试验方法 |
Test Method for Water Content of Water-Reducible Paints by Direct Injection into a Gas Chromatograph |
ASTM D 3793-2000 |
乳胶漆膜低温凝聚的标准试验方法 |
Standard Test Method for Low-Temperature Coalescence of Latex Paint Films |
ASTM D 3794-2000 |
线圈涂料试验的标准指南 |
Standard Guide for Testing Coil Coatings |
ASTM D 3795-2000 |
用转矩流变仪测定可流动热固性材料的热通量、固化和特性的标准试验方法 |
Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer |
ASTM D 3796-1990 |
S型皮托管(空速管)的校正 |
Calibration of Type S Pitot Tubes |
ASTM D 3797-2000 |
气相色谱法分析邻二甲苯的标准试验方法 |
Standard Test Method for Analysis of o-Xylene by Gas Chromatography |
ASTM D 3798-2000 |
气相色谱法分析对二甲苯的标准试验方法 |
Standard Test Method for Analysis of p-Xylene by Gas Chromatography |
ASTM D 3799-1995 |
用冰点法测试苯乙烯纯度的试验方法 |
Test Method for Purity of Styrene by Freezing Point Method |
ASTM D 38-1994 |
木材防腐剂的抽样试验方法 |
Test Methods for Sampling Wood Preservatives Prior to Testing |
ASTM D 380-1994 |
橡胶软管的测试方法 |
Test Methods for Rubber Hose |
ASTM D 3800-1999 |
高模数纤维密度的标准试验方法 |
Standard Test Method for Density of High-Modulus Fibers |
ASTM D 3801-1996 |
测量在垂直状态下实芯塑料的对比熄灭特性的方法 |
Test Method for Measuring the Comparative Extinguishing Characteristics of Solid Plastics in a Vertical Position |
ASTM D 3802-1979 |
活性碳的球盘硬度的试验方法 |
Test Method for Ball-Pan Hardness of Activated Carbon |
ASTM D 3803-1991 |
核级活性碳的标准试验方法 |
Standard Test Method for Nuclear-Grade Activated Carbon |
ASTM D 3804-2002 |
用EDTA法测定颜料干燥剂中铁含量的标准试验方法 |
Standard Test Method for Iron in Paint Driers by EDTA Method |
ASTM D 3805-1997 |
填充铝颜料的沥青屋顶涂料的涂覆的标准指南 |
Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings |
ASTM D 3806-1998 |
小规模评价阻燃涂料的试验方法(2英尺通道法) |
Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method) |
ASTM D 3807-1998 |
用拉力负荷法测定裂缝/撕裂中胶粘剂抗拉特性的测试方法(工程塑料之间) |
Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics- to-Engineering Plastics) |
ASTM D 3808-1996 |
用点粘试验法测定胶粘剂与基底的粘结质量 |
Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion |
ASTM D 3809-1979 |
电容用合成介电流体的试验 |
Testing Synthetic Dielectric Fluids for Capacitors |
ASTM D 381-1994 |
用喷射蒸发法测定燃烧中原在胶的测试方法 |
Test Method for Existent Gum in Fuels by Jet Evaporation |
ASTM D 381-2000 |
用喷射蒸发法测定燃料中原在胶含量的标准试验方法 |
Standard Test Method for Gum Content in Fuels by Jet Evaporation |
ASTM D 3810-1997 |
IA型防止儿童开启的关闭器的最小应用力矩的试验方法 |
Test Method for Minimum Application Torque of Type IA Child-Resistant Closures |
ASTM D 3811-1996 |
压合带开卷力的试验方法 |
Test Method for Unwind Force of Pressure-Sensitive Tapes |
ASTM D 3811/D 3811M-1996 |
压敏胶纸带解舒力的标准试验方法 |
Standard Test Method for Unwind Force of Pressure-Sensitive Tapes |
ASTM D 3811M-1996 |
压合带开卷力的试验方法(米制) |
Test Method for Unwind Force of Pressure-Sensitive Tapes (Metric) |
ASTM D 3813-1996 |
压感胶带开卷的卷曲度及扭转度的试验方法(米制) |
Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes |
ASTM D 3813/D 3813M-1998 |
压敏带非缠绕处拳曲和扭曲的试验方法 |
Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes |
ASTM D 3813M-1996 |
压感胶带开卷的卷曲度及扭转度的试验方法(米制) |
Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes (Metric) |
ASTM D 3814-1999 |
聚合材料的定位燃烧试验方法的标准指南 |
Standard Guide for Locating Combustion Test Methods for Polymeric Materials |
ASTM D 3815-1989 |
用碳弧曝光装置加速压感胶带老化的规程 |
Accelerated Aging of Pressure-Sensitive Tapes by Carbon-Arc Exposure Apparatus |
ASTM D 3815/D 3815M-1999 |
用碳弧暴露仪测定压敏胶纸带加速老化的标准规程 |
Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Carbon-Arc Exposure Apparatus |
ASTM D 3815M-1989 |
用碳弧曝光装置加速压感胶带老化的规程(米制) |
Accelerated Aging of Pressure-Sensitive Tapes by Carbon-Arc Exposure Apparatus (Metric) |
ASTM D 3816-1996 |
压感胶带的水渗透率的试验方法 |
Test Method for Water Penetration Rate of Pressure-Sensitive Tapes |
ASTM D 3816/D 3816M-1996 |
压敏胶纸带水渗透率的标准试验方法 |
Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes |
ASTM D 3816M-1996 |
压感胶带的水渗透率的试验方法(米制) |
Test Method for Water Penetration Rate of Pressure-Sensitive Tapes (Metric) |
ASTM D 3819-1995 |
男人及男孩用机织睡衣织物的性能规格 |
Performance Specification for Mens and Boys Woven Pajama Fabrics |
ASTM D 3820-1995 |
男人及男孩用机织内衣织物的性能规格 |
Performance Specification for Mens and Boys Woven Underwear Fabrics |
ASTM D 3822-1996 |
单支纺织品纤维的张力性能的试验方法 |
Test Method for Tensile Properties of Single Textile Fibers |
ASTM D 3823-1994 |
测定缝纫线标签数目的规格 |
Determining Ticket Numbers for Sewing Threads |
ASTM D 3824-1995 |
用化学发光法连续测定周围环境或工作间空气中氯化氮含量的试验方法 |
Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method |
ASTM D 3825-1990 |
快速气泡法测定动态表面张力的试验方法 |
Test Method for Dynamic Surface Tension by the Fast-Bubble Technique |
ASTM D 3826-1998 |
用拉伸试验对聚乙烯和聚丙烯老化过程的最终老化点的测定 |
Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test |
ASTM D 3850-1994 |
用热解重量法测定固体电绝缘材料快速热降解的试验方法 |
Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method |
ASTM D 3851-1997 |
氨基甲酸乙酯微孔鞋底材料 |
Urethane Microcellular Shoe Soling Materials |
ASTM D 3852-1999 |
苯酚和甲苯基酸的采样和处置方法 |
Sampling and Handling Phenol and Cresylic Acid |
ASTM D 3853-1997 |
橡胶及橡胶胶乳的相关术语.混炼用化学药品的缩写 |
Terminology Relating to Rubber and Rubber Latices - Abbreviations for Chemicals Used in Compounding |
ASTM D 3854-1990 |
橡胶绳耐干热试验方法 |
Test Method for Rubber Thread - Resistance to Dry Heat |
ASTM D 3855-1984 |
橡胶绳因洗涤液浸渍变质的试验方法 |
Test Method for Rubber Thread - Deterioration Due to Washing Solution Treatment |
ASTM D 3856-1995 |
从事水取样和分析的实验室中优秀实验室规程 |
Good Laboratory Practices in Laboratories Engaged in Sampling and Analysis of Water |
ASTM D 3858-1995 |
用速度面积法测量明渠水流量的试验方法 |
Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method |
ASTM D 3859-1998 |
水中硒含量的试验方法 |
Test Methods for Selenium in Water |
ASTM D 3860-1998 |
用液相等温线技术对活性炭的吸水率的测量 |
Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique |
ASTM D 3861-1991 |
膜滤器中水萃取物质数量的试验方法 |
Test Method for Quantity of Water-Extractable Matter in Membrane Filters |
ASTM D 3862-1980 |
评定微生物水质的常规过滤程序用0.2微米滤膜的滞留特性的试验方法 |
Test Method for Retention Characteristics of 0.2-um Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality |
ASTM D 3863-1987 |
评定微生物水质的常规过滤程序用0.4微米到0.45微米滤膜的滞留特性的试验方法 |
Test Method for Retention Characteristics of 0.40 to 0.45-um Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality |
ASTM D 3864-1996 |
水分析用连续在线监测系统的规定 |
Continual On-Line Monitoring Systems for Water Analysis |