标准号 |
中文名称 |
英文名称 |
ASTM E 1285-2001 |
λ(拉姆达)噬菌现象或它的脱氧核糖核酸的识别标准指南 |
Standard Guide for Identification of Bacteriophage Lambda ([lambda]) or Its DNA |
ASTM E 1286-1989 |
热疮病毒或它的脱氧核糖核酸的识别 |
Identification of Herpes Simplex Virus or Its DNA |
ASTM E 1287-1989 |
生物材料的无菌取样 |
Aseptic Sampling of Biological Materials |
ASTM E 1288-1989 |
生物量球粒耐久性的试验方法 |
Test Method for the Durability of Biomass Pellets |
ASTM E 1289-1997 |
声传输损耗的标样 |
Reference Specimen for Sound Transmission Loss |
ASTM E 129-1974 |
用粉末技术做热离子镍合金光谱分析的试验方法 |
Test Method for Spectrographic Analysis of Thermionic Nickel Alloys by the Powder Technique |
ASTM E 1290-1999 |
测量裂缝尖端开口位移(CTOD)裂缝韧性的试验方法 |
Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement |
ASTM E 1291-1999 |
用老鼠进行饱和蒸气吸入研究的试验方法 |
Test Method for Conducting a Saturated Vapor Inhalation Study with Rats |
ASTM E 1292-1994 |
重力对流和强制通风恒温箱 |
Gravity Convection and Forced Ventilation Incubators |
ASTM E 1293-1994 |
玻璃测量移液管 |
Glass Measuring Pipets |
ASTM E 1294-1989 |
用自动液体孔率计检验薄膜过滤器的孔径特性的测试方法 |
Test Method for Pore Size Characteristics of Membrane Filters Using Automated Liquid Porosimeter |
ASTM E 1295-2001 |
用网纹水蚤(Dubia)进行三卵、复原毒性试验的标准指南 |
Standard Guide for Conducting Three-Brood, Renewal Toxicity Tests with Ceriodaphnia dubia |
ASTM E 1297-1996 |
用铌辐射激活法测量快中子反应率的试验方法 |
Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium |
ASTM E 1298-1989 |
生物药品中纯净度,污物和杂质的测定 |
Determination of Purity, Impurities and Contaminants in Biological Drug Products |
ASTM E 1299-1996 |
人体温度断续测量用可重新使用的相变换型体温计 |
Reusable Phase Change-Type Fever Thermometer for Intermittent Determination of Human Temperature |
ASTM E 130-1987 |
石墨电极形状和尺寸的名称与符号 |
Designation of Shapes and Sizes of Graphite Electrodes |
ASTM E 1300-1997 |
测定要求耐规定荷载的退火玻璃的最小厚度 |
Determining the Minimum Thickness of Annealed Glass Required to Resist a Specified Load |
ASTM E 1301-1995 |
实验室技术熟练检验计划的制定和执行 |
Development and Operation of Laboratory Proficiency Testing Programs |
ASTM E 1302-2000 |
在水可溶混合的金属加工液条件下对动物剧毒性测试的标准指南 |
Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
ASTM E 1303-1995 |
液相色谱法用折射指数检测器 |
Refractive Index Detectors Used in Liquid Chromatography |
ASTM E 1304-1997 |
金属材料平面变形(V型槽口)断裂韧度的测试方法(代替SAE ARP 1704) |
Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials (Supersedes SAE ARP 1704) |
ASTM E 1306-1994 |
化合物测定用电弧溶化时活性和耐溶金属及合金式样的制备 |
Preparation of Reactive and Refractory Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition |
ASTM E 1307-2000 |
平面遮蔽板用预硫化非金属复合面板的表面制备和与结构芯层的结构胶合的标准实施规程 |
Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels |
ASTM E 1308-1992 |
计算机管理材料性能数据库中聚合物(热固性合成橡胶除外)的识别 |
Identification of Polymers (Excludes Thermoset Elastomers) in Computerized Material Property Databases |
ASTM E 1309-2000 |
数据库中纤维增强聚合物复合材料的识别的标准指南 |
Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases |
ASTM E 131-2000 |
分子光谱学的相关标准术语 |
Standard Terminology Relating to Molecular Spectroscopy |
ASTM E 1310-1998 |
辐射铬光学波导管剂量测定系统的使用 |
Use of a Radiochromic Opitcal Waveguide Dosimetry System |
ASTM E 1311-1989 |
热像仪用最低可检测温差的测试方法 |
Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems |
ASTM E 1312-1999 |
居里温度以上铁磁圆柱棒产品的电磁(涡流)检验 |
Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature |
ASTM E 1313-1995 |
材料性能数据的计算机化管理用数据记录的采集和加工 |
Development of Data Records for Computerization of Material Property Data |
ASTM E 1314-1989 |
与计算机管理的试验报告和材料标志格式相关的结构化术语记录 |
Structuring Terminological Records Relating to Computerized Test Reporting and Materials Designation Formats |
ASTM E 1315-1993 |
带有凸圆柱弯曲进入面钢的超声检验 |
Ultrasonic Examination of Steel with Convex Cylindrically Curved Entry Surfaces |
ASTM E 1316-1997 |
无损检验术语 |
Terminology for Nondestructive Examinations |
ASTM E 1317-1997 |
船舶表面涂层易燃性的试验方法 |
Test Method for Flammability of Marine Surface Finishes |
ASTM E 1318-2002 |
根据用户要求的公路承重监测器系统和测试方法标准规范 |
Standard Specification for Highway Weigh-in-Motion (WIM) Systems with User Requirements and Test Methods |
ASTM E 1319-1998 |
高温变形测量 |
High-Temperature Strain Measurement |
ASTM E 132-1997 |
室温下泊松比率的试验方法 |
Test Method for Poissons Ratio at Room Temperature |
ASTM E 1320-1995 |
钛铸件用基准X射线照相 |
Reference Radiographs for Titanium Castings |
ASTM E 1321-1997 |
测量材料引燃和火焰曼延性能的测试方法 |
Test Method for Determining Material Ignition and Flame Spread Properties |
ASTM E 1322-1990 |
实验室认可体系评定员的选择,训练和评估 |
Selection, Training and Evaluation of Assessors for Laboratory Accreditation Systems |
ASTM E 1323-1989 |
实验室测量规程的评估和结果数据的统计分析 |
Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data |
ASTM E 1324-2000 |
超声检验装置的某些电子特性测定的标准指南 |
Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Examination Instruments |
ASTM E 1325-1991 |
与实验装置设计相关的术语 |
Terminology Relating to Design of Experiments |
ASTM E 1326-1998 |
细菌计数用的非常规微生物试验的评价 |
Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria |
ASTM E 1327-1990 |
利用指甲部位评定个人保健洗手配方的测试方法 |
Test Method for Evaluation of Health Care Personnel Handwash Formulations by Utilizing Fingernail Regions |
ASTM E 1328-1999 |
与光电太阳能转换相关的标准术语 |
Standard Terminology Relating to Photovoltaic Solar Energy Conversion |
ASTM E 1329-1996 |
光谱化学分析中控制图表的验证和使用 |
Verification and the Use of Control Charts in Spectrochemical Analysis |
ASTM E 133-1992 |
蒸馏设备 |
Distillation Equipment |
ASTM E 1331-1996 |
用半球体几何形状的分光光度法测量反射系数和颜色的测试方法 |
Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
ASTM E 1332-1990 |
室外-室内透过等级测定用分类 |
Classification for Determination of Outdoor-Indoor Transmission Class |
ASTM E 1333-1996 |
确定的试验条件下用大容器测定木制品甲醛量的测试方法 |
Test Method for Determining Formaldehyde Levels from Wood Products Under Defined Test Conditions Using a Large Chamber |
ASTM E 1334-1995 |
建筑物或设施耐用参数的制备 |
Preparing a Serviceability Rating of a Building or Facility |
ASTM E 1335-1996 |
用吹灰法测定金条中纯金的测试方法 |
Test Method for Determination of Gold in Bullion by Cupellation |
ASTM E 1336-1996 |
用辐射分光法从视频显示单中获取比色数据试验方法 |
Test Method for Obtaining Colorimetric Data from a Video Display Unit by Spectroradiometry |
ASTM E 1337-1990 |
用参考试验轮胎测定纵向峰值制动系数的测试方法 |
Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Reference Test Tire |
ASTM E 1338-1997 |
计算机化材料特性数据库的金属和合金的识别 |
the Identification of Metals and Alloys in Computerized Material Property Databases |
ASTM E 1339-1990 |
计算机管理材料性能数据库中铝合金和零件的识别 |
Identification of Aluminum Alloys and Parts in Computerized Material Property Databases |
ASTM E 1340-1996 |
计算机管理系统的快速形成原型 |
Rapid Prototyping of Computerized Systems |
ASTM E 1341-1996 |
从比色法用从辐射源中获取辐射分光数据 |
Obtaining Spectroradiometric Data from Radiant Sources for Colorimetry |
ASTM E 1342-1997 |
用冷冻、冷冻干燥和低温养护法对细菌、真菌、原生生物、病毒、遗传要素以及动物和植物组织的保存 |
Preservation by Freezing, Freeze-Drying and Low Temperature Maintenance of Bacteria, Fungi, Protista, Viruses, Genetic Elements and Animal and Plant Tissues |
ASTM E 1343-1990 |
平板超滤膜的分子量界限评定的测试方法 |
Test Method for Molecular Weight Cutoff Evaluation of Flat Sheet Ultrafiltration Membranes |
ASTM E 1344-1990 |
燃料乙醇生产设备的评定 |
Evaluation of Fuel Ethanol Manufacturing Facilities |
ASTM E 1345-1998 |
用多次测量法降低颜色测量变异性的影响 |
Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
ASTM E 1346-1990 |
感官评定用大量取样,搬运和制备食用植物油 |
Bulk Sampling, Handling and Preparing Edible Vegetable Oils for Sensory Evaluation |
ASTM E 1347-1997 |
用三色(滤色器)比色法进行颜色和色差测量的试验方法 |
Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry |
ASTM E 1348-1990 |
用半球体几何形状的分光光度法测量透明度和颜色的测试方法 |
Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry |
ASTM E 1349-1990 |
用双向几何形状的分光光度法测量反射系数和颜色的测试方法 |
Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry |
ASTM E 135-2001 |
金属、矿石及相关材料的分析化学的有关标准术语 |
Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 1350-1997 |
安装前、安装期间和安装之后铠装热电偶测试的试验方法 |
Test Methods for Testing Sheathed Thermocouples Prior to, During and After Installation |
ASTM E 1351-2001 |
现场金相复制品的生产和评定标准实施规范 |
Standard Practice for Production and Evaluation of Field Metallographic Replicas |
ASTM E 1352-1999 |
模型化装软垫家具组件的抗香烟点燃性的试验方法 |
Test Method for Cigarette Ignition Resistance of Mock-up Upholstered Furniture Assemblies |
ASTM E 1353-1999 |
装软垫家具部分的耐香烟点燃性的试验方法 |
Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture |
ASTM E 1354-1999 |
用耗氧热量计测量材料和产品的热及可见烟雾释放率的试验方法 |
Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM E 1355-1997 |
火焰模型预测能力的评价 |
Evaluating the Predictive Capability of Fire Models |
ASTM E 1356-1998 |
用差示扫描量热法或差示热分析测量玻璃透过温度的试验方法 |
Test Method for Glass Transition Temperatures by Differential Scanning Calorimetry or Differential Thermal Analysis |
ASTM E 1357-1990 |
用硫杆菌铁氧化剂从黄铁矿中测定铁的双浸取率的测试方法 |
Test Method for Determining the Rate of Bioleaching of Iron From Pyrite by Thiobacillus Ferrooxidans |
ASTM E 1358-1997 |
用微波炉测定颗粒木材燃料含水量的测试方法 |
Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven |
ASTM E 1359-1999 |
检查无损检验机构 |
Surveying Nondestructive Testing Agencies |
ASTM E 135a-2001 |
金属、矿石及相关材料的分析化学的有关标准术语 |
Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 136-1999 |
750℃时立式管炉中材料特性的标准试验方法 |
Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750oC |
ASTM E 1360-1990 |
按美国均匀色标系统光学学会规定说明颜色 |
Specifying Color by Using the Optical Society of America Uniform Color Scales System |
ASTM E 1361-1990 |
X射线光谱测定分析中素间的效应校正 |
Correction of Interelement Effects in X-Ray Spectrometric Analysis |
ASTM E 1362-1999 |
非浓缩器光电二次标准电池校准的标准试验方法 |
Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells |
ASTM E 1363-1997 |
热机械分析仪温度校准的测试方法 |
Test Method for Temperature Calibration of Thermomechanical Analyzers |
ASTM E 1364-1995 |
用静态水平仪法测量道路不平度的测试方法 |
Test Method for Measuring Road Roughness by Static Level Method |
ASTM E 1366-1996 |
标准化水生物缩影:淡水 |
Standardized Aquatic Microcosms: Fresh Water |
ASTM E 1367-1999 |
用海水中和河口处生长的端足类甲壳动物作10天静态沉淀物毒性试验 |
Conducting 10-Day Static Sediment Toxicity Tests with Marine and Estuarine Amphipods |
ASTM E 1368-1997 |
石棉消除项目的外观检查 |
Visual Inspection of Asbestos Abatement Projects |
ASTM E 1369-1998 |
建筑物和建筑系统经济评估中处理不定性和风险的技术选择 |
Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems |
ASTM E 1370-1996 |
工作者和工作场地防护用空气取样策略 |
Air Sampling Strategies for Worker and Workplace Protection |
ASTM E 1371-1990 |
磷铜合金或磷铜银合金中磷的重量分析测定的测试方法 |
Test Method for Gravimetric Determination of Phosphorus in Phosphorus-Copper Alloys or Phosphorus-Copper-Silver Alloys |
ASTM E 1372-1995 |
进行老鼠中90天口服毒药研究的测试方法 |
Test Method for Conducting a 90-Day Oral Toxicity Study in Rats |
ASTM E 1373-1992 |
进行老鼠的亚慢性吸入毒性研究的试验方法 |
Test Method for Conducting a Subchronic Inhalation Toxicity Study in Rats |
ASTM E 1374-1993 |
开放式办公室声学及其适用的ASTM标准 |
Open Office Acoustics and Applicable ASTM Standards |
ASTM E 1375-1990 |
作为隔声屏障的家具面板的区间衰减测量用测试方法 |
Test Method for Measuring the Interzone Attenuation of Furniture Panels Used as Acoustical Barriers |
ASTM E 1376-1990 |
墙面涂层和家俱面板的声反射区域间衰减测量用测试方法 |
Test Method for Measuring the Interzone Attenuation of Sound Reflected by Wall Finishes and Furniture Panels |
ASTM E 1377-1999 |
实验室开尔达玻璃烧瓶的标准规范 |
Standard Specification for Laboratory Glass Kjeldahl Flasks |
ASTM E 1378-1999 |
实验室玻璃多功能缩颈蒸馏烧瓶和长劲烧瓶的标准规范 |
Standard Specification for Laboratory Glass Multiple Neck Distilling/Boiling Flasks |
ASTM E 1379-1990 |
实验室玻璃杜瓦瓶 |
Laboratory Glass Dewar Flask |
ASTM E 1380-1990 |
0.1毫升或稍大容量的多刻度实验室移液管用色码,不包括可处置的凝血酶原和一次性微量滴管 |
Color Coding of Laboratory Pipets with Multiple Graduations, 0.1 mL and Larger, but Excluding Disposable Prothrombin and Disposable Micropipets |
ASTM E 1381-1995 |
临床实验室装置和计算机系统间传送信息的低级协议 |
Low-Level Protocol to Transfer Messages Between Clinical Laboratory Instruments and Computer Systems |
ASTM E 1382-1997 |
用半自动和自动图象分析测量平均粒度的测试方法 |
Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis |
ASTM E 1384-1999 |
管理的自动化原始记录的内容和结构描述指南 |
Description for Content and Structure of an Automated Primary Record of Care |
ASTM E 1385-1995 |
用蒸馏法对从火灾瓦砾样品中获取的可燃或易燃液体残渣的分离和浓缩 |
Separation and Concentration of Flammable or Combustible Liquid Residues from Fire Debris Samples by Steam Distillation |
ASTM E 1386-1995 |
用溶剂萃取法对火灾瓦砾样品中获取的可燃或易燃液体残渣的分离和浓缩 |
Separation and Concentration of Flammable or Combustible Liquid Residues from Fire Debris Samples by Solvent Extraction |
ASTM E 1387-1995 |
用气相色谱法对从火灾瓦砾样品中获取的可燃或易燃液体残渣的试验方法 |
Test Method for Flammable or Combustible Liquid Residues in Extracts from Samples of Fire Debris by Gas Chromatography |
ASTM E 1388-1995 |
对从火灾瓦砾样品中获取的头上空间蒸汽取样 |
Sampling of Headspace Vapors from Fire Debris Samples |
ASTM E 1389-1995 |
用酸洗法对火灾瓦砾样品提取物的清洗 |
Cleanup of Fire Debris Sample Extracts by Acid Stripping |
ASTM E 139-2000 |
金属材料传导蠕变、蠕变断裂和应力断裂的标准试验方法 |
Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials |
ASTM E 1390-1990 |
用于观察工业射线照相的照明装置 |
Illuminators Used for Viewing Industrial Radiographs |
ASTM E 1391-1994 |
毒理测定用沉积物的收集,存储,表征和操作方法 |
Collection, Storage, Characterization and Manipulation of Sediments for Toxicological Testing |
ASTM E 1392-1996 |
镜面或反射面角度分析光散射测量 |
Angle Resolved Optical Scatter Measurements on Specular or Diffuse Surfaces |
ASTM E 1393-1990 |
用尖状往复式抛光机械测定沥青路面及样品精整性的试验方法 |
Test Method for Determining the Polishability of Bituminous Pavement Surfaces and Specimens by Means of the Penn State Reciprocating Polishing Machine |
ASTM E 1394-1997 |
临床设备和计算机系统之间的信息传递 |
Transferring Information Between Clinical Instruments and Computer Systems |
ASTM E 1395-1990 |
低加热辣椒的感官评定试验方法 |
Test Method for Sensory Evaluation of Low Heat Chilies |
ASTM E 1396-1990 |
油树脂辣椒感官评定的试验方法 |
Test Method for Sensory Evaluation of Oleoresin Capsicum |
ASTM E 1397-1991 |
试管内鼠肝细胞DNA修复化验 |
in vitro Rat Hepatocyte DNA Repair Assay |
ASTM E 1398-1991 |
鼠体内肝细胞DNA修复化验 |
in vivo Rat Hepatocyte DNA Repair Assay |
ASTM E 1399-1997 |
建筑连接系统最小和最大连接宽度的测量和循环运动的试验方法 |
Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
ASTM E 140-2002 |
金属标准硬度换算表(布氏硬度、维氏硬度、洛氏硬度、表面硬度、努氏硬度和肖氏硬度之间的关系) |
Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness |