编号 | 中文名称 | 英文名称 |
ANSI B11.9-1975
| 机床.磨床的制造、维护和使用的安全要求
| Safety Requirements for the Construction, Care and Use of Grinding Machines
|
ANSI B28.1-2000
| 橡胶工业中磨床和砑光机的安全规范
| Safety Specifications for Mills and Calenders in the Rubber Industry
|
ANSI B5.32-1977
| 往复台式平面磨床的名称与牌号及加工范围
| Surface Grinding Machines of the Reciprocating Table Type, Designation and Working Ranges of
|
ANSI B5.32.1-1977
| 立轴往复台式平面磨床
| Grinding Machines, Surface, Reciprocating Table - Vertical Spindle
|
ANSI B5.37-1970
| 无心外圆磨床
| External Cylindrical Grinding Machines - Centerless
|
ANSI B5.42-1981
| 万能外圆磨床
| External Cylindrical Grinding Machines - Universal
|
ANSI/OPEI B71.6-2000
| 电动食品磨碎机/研磨机和食品磨碎机/装袋机的安全规范
| Powered Shredder/Grinders and Shredder/Baggers, Safety Specifications
|
ANSI/UL 1017-2006
| 真空吸尘器、吹风式吸尘器和家用地板抛光机的标准(推荐日期11-18-05)
| Standard for Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines (proposals dated 11-18-05)
|
ANSI/UL 60745-2-3-2007
| 手持式电动机带动的电动工具.安全性.第2-3部分:研磨机、抛光机和盘砂轮机的特殊要求
| Hand-Held Motor-Operated Electrical Tools - Safety - Part 2-3: Particular Requirements for Grinders, Polishers and Disk-Type Sanders
|
ANSI/UL 60745-2-3-2007
| 手持式电动机带动的电动工具.安全性.第2-3部分:研磨机、抛光机和盘砂轮机的特殊要求
| Hand-Held Motor-Operated Electrical Tools - Safety - Part 2-3: Particular Requirements for Grinders, Polishers and Disk-Type Sanders
|
ANSI/UL 60745-2-4-2006
| 手持式电动工具.安全.第2-4部分:盘式除外的打磨机和抛光机的特殊要求
| Hand-Held Motor-Operated Electric Tools - Safety - Part 2-4: Particular Requirements for Sanders and Polishers Other Than Disk Type
|
ANSI/UL 745-2-3-2006
| 研磨机、抛光机和盘式砂轮机特殊要求的安全标准
| Standard For Safety For Particular Requirements for Grinders, Polishers and Disk-Type Sanders
|
ANSI/UL 745-2-3-2006
| 研磨机、抛光机和盘式砂轮机特殊要求的安全标准
| Standard For Safety For Particular Requirements for Grinders, Polishers and Disk-Type Sanders
|
ASME B5.33-1981
| 普通外圆磨床
| (External cylindrical grinding machines - Plain)
|
ASME B5.42-1981
| 万能外圆磨床
| (External cylindrical grinding machines - Universal)
|
ASME B5.53M-1982
| 刀具和工具磨床
| (Cutter and tool grinding machines)
|
ASTM D 387-2000
| 使用机械研磨机测定有色颜料主色和着色强度的标准试验方法
| Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller
|
ASTM D 5963-2004
| 橡胶性能的标准试验方法.耐磨性(旋转滚筒式研磨机)
| Standard Test Method for Rubber Property - Abrasion Resistance (Rotary Drum Abrader)
|
ASTM E 1393-1990
| 用尖状往复式抛光机械测定沥青路面及样品精整性的试验方法
| Test Method for Determining the Polishability of Bituminous Pavement Surfaces and Specimens by Means of the Penn State Reciprocating Polishing Machine
|
BS 1089-1973
| 外圆、内圆与万能磨床的转盘主轴头规范
| Specification for workhead spindle noses for grinding machines: cylindrical external, internal and universal types
|
BS 4581-2-1984
| 磨床砂轮安装用法兰.第2部分:76.2mm以下孔径砂轮用法兰尺寸和材料规范
| Flanges for mounting grinding wheels on grinding machine tools - Specification for dimensions and materials of flanges for grinding wheels of less than 76.2 mm bore
|
BS 4656-9-1974
| 机床精度及试验方法.第9部分:往复台式外圆磨床
| Accuracy of machine tools and methods of test - External cylindrical grinding machines with reciprocating table
|
BS EN 13218-2002
| 机床.安全性.固定式磨床
| Machine tools - Safety - Stationary grinding machines
|
BS EN 13900-4-2004
| 颜料和填充剂.扩散方法和在塑料中可扩散性的评定.用双辊研磨机测定聚乙烯中白颜料的颜色性能和易扩散性
| Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling
|
BS EN 1417-1997
| 橡胶和塑料加工机械.双辊研磨机的安全性要求
| Rubber and plastics machines - Two roll mills - Safety requirements
|
BS EN 14958-2006
| 食品加工机械.研磨加工面粉和粗粒小麦粉用磨床
| Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements
|
BS EN 50144-2-3-2002
| 手持电动工具的安全.研磨机、圆盘砂轮机和抛光机的特殊要求
| Safety of hand-held electric motor operated tools - Particular requirements for grinders, disk type sanders and polishers
|
BS EN 50144-2-3-2002
| 手持电动工具的安全.研磨机、圆盘砂轮机和抛光机的特殊要求
| Safety of hand-held electric motor operated tools - Particular requirements for grinders, disk type sanders and polishers
|
BS EN 60745-2-3-2007
| 手持式机动电动工具.安全.研磨机、抛光机和盘型砂轮机的特殊要求
| Hand-held motor-operated electric tools - Safety - Particular requirements for grinders, polishers and disk-type sanders
|
BS EN 60745-2-3-2007
| 手持式机动电动工具.安全.研磨机、抛光机和盘型砂轮机的特殊要求
| Hand-held motor-operated electric tools - Safety - Particular requirements for grinders, polishers and disk-type sanders
|
BS EN 60745-2-4-2003
| 手持式电动工具的安全.盘式除外的砂轮机和抛光机的特殊要求
| Hand-held motor-operated electric tools - Safety - Particular requirements for sanders and polishers other than disk type
|
BS EN 61029-2-4-2003
| 移动式电动工具的安全.台式磨床的特殊要求
| Safety of transportable motor-operated tools - Particular requirements for bench grinders
|
BS EN 792-7-2001
| 手持式非电动工具.安全要求.第7部分:研磨机
| Hand-held non-electric power tools - Safety requirements - Part 7: Grinders
|
BS EN 792-8-2001
| 手持非电动工具.安全性要求.砂轮机和抛光机
| Hand-held non-electric power tools - Safety requirements - Sanders and polishers
|
BS EN 792-9-2001
| 手持非电动工具.安全性要求.冲压磨床
| Hand-held non-electric power tools - Safety requirements - Die grinders
|
BS EN ISO 8662-13-1997
| 便携式手提动力工具.手柄振动测量.模具研磨机
| Hand-held portable power tools - Measurement of vibrations at the handle - Die grinders
|
BS EN ISO 8662-4-1995
| 便携式手提动力工具.手柄振动的测量.第4部分:磨床
| Hand-held portable power tools - Measurement of vibrations at the handle - Grinding machines
|
BS EN ISO 8780-4-1991
| 颜料和稀释剂.色散特性评定用色散方法.第4部分:研磨机评定色散
| Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Dispersion using a bead mill
|
BS EN ISO 8780-5-1991
| 颜料和稀释剂.色散特性评定用色散方法.第5部分:自动研磨机评定色散
| Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Dispersion using an automatic muller
|
BS ISO 1985-1998
| 机床.设有立式磨床心轴和往复式工作台的平面磨床试验条件.精度试验
| Machine tools - Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy
|
BS ISO 1986-1-2001
| 卧轴矩台平面磨床的验收条件.精度检验.工作台长度达到1600mm的机床
| Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of the accuracy - Machines with a table length of up to 1600mm
|
BS ISO 2407-1998
| 卧式心轴内圆磨床的试验条件.精度试验
| Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy
|
BS ISO 3875-2004
| 机械工具.外圆无心磨床的试验条件.精度检验
| Machine tools - Test conditions for external cylindrical centreless grinding machines - Testing of the accuracy
|
BS ISO 4703-2001
| 双柱式平面磨床的验收条件.导轨磨床.精度试验
| Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy
|
BS ISO 603-13-1999
| 粘合磨料产品.尺寸.立式磨床去除和整修毛刺用砂轮
| Bonded abrasive products - Dimensions - Grinding wheels for deburring and fettling on a vertical grinder
|
DIN 45635-1610-1984
| 机器空气噪声的测量.包络面法.金属加工机床.磨床的特殊规定
| Measurement of airborne noise emitted by machines; enveloping surface method; metal working machines grinding machines
|
DIN 6374-1980
| 磨床心轴.
| Grinding machine mandrels
|
DIN 69718-1-1976
| 机床.第1部分:外圆磨床.定义和术语
| Machine Tools; External Cylindrical Grinding Machines; Definitions and Terms
|
DIN 69718-2-1977
| 机床.卧轴平面磨床.定义和术语
| Machine Tools; Surface Grinding Machines with Horizontal Grinding Spindle; Definitions and Terms
|
DIN 69718-3-1977
| 机床.无心外圆磨床.定义和术语
| Machine Tools; Centreless External Cylindrical Grinding Machines; Definitions and Terms
|
DIN 8630-1988
| 机床.带活动工作台的外圆磨床.验收条件
| Machine tools; external cylindrical grinding machines with a movable workpiece table; acceptance conditions
|
DIN 8632-1-1989
| 机床.卧式活动矩形台平面磨床.验收条件
| Machine tools; surface grinding machines with horizontal grinding wheel spindle and rectangular reciprocating table; acceptance conditions
|
DIN 8632-3-1976
| 机床.带卧式磨轮轴的平面磨床.验收条件
| Machine Tools; Surface Grinding Machines with Horizontal Grinding Wheel Spindle, with Round Table; Acceptance Conditions
|
DIN 8632-4-1978
| 机床.平面磨床.双立柱平面磨床.导轨磨床.验收条件
| Machine Tools; Surface Grinding Machines; Surface Grinding Machines with Two Columns; Grinding-machines for Grinding Slideways; Acceptance Conditions
|
DIN 8633-3-1977
| 机床.立式砂轮回转和圆形工作台的平面磨床.验收条件
| Machine Tools; Surface Grinding Machines with Vertical Grinding Wheel Spindle and Round Table; Acceptance Conditions
|
DIN 8634-1994
| 机床.无心外圆磨床.验收条件
| Machine tools; external cylindrical centreless grinding machines; acceptance conditions
|
DIN EN 1034-22-2005
| 机械安全.纸张制造和整饰机械设计和建造的安全要求.第22部分:木制研磨机
| Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders; German version EN 1034-22:2005
|
DIN EN 13218-2002
| 机床.安全性.固定式磨床; 德文版本 EN 13218:2002
| Machine tools - Safety - Stationary grinding machines; German version EN 13218:2002
|
DIN EN 13900-4-2004
| 颜料和稀释剂.扩散方法和在塑料中可扩散性的评估.第4部分:由双滚研磨机测定聚乙烯中的白颜料的颜色性能和易
| Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 4: Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling; German version EN 13900-4:2004
|
DIN EN 60745-2-3-2007
| 手持式电动工具.安全.第2-3部分:研磨机、抛光机和盘型砂轮机的特殊要求
| Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders (IEC 60745-2-3:2006, modified); German version EN 60745-2-3:2007
|
DIN EN 60745-2-3-2007
| 手持式电动工具.安全.第2-3部分:研磨机、抛光机和盘型砂轮机的特殊要求
| Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders (IEC 60745-2-3:2006, modified); German version EN 60745-2-3:2007
|
DIN EN 60745-2-4-2004
| 手持式电动工具的安全.第2-4部分:盘形除外的砂轮磨光机和抛光机的特殊要求
| Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type (IEC 60745-2-4:2002, modified); German version EN 60745-2-4:2003
|
DIN EN 792-7-2002
| 手持式非电动工具.安全要求.第7部分:研磨机; 德文版本 EN 792-7:2001
| Hand-held non-electric power tools - Safety requirements - Part 7: Grinders; German version EN 792-7:2001
|
DIN EN 792-8-2001
| 手持式非电动工具.安全性要求.第8部分:抛光机和砂轮磨具
| Hand-held non-electric power tools - Safety requirements - Part 8: Polishers and sanders; German version EN 792-8:2001
|
DIN EN 792-9-2001
| 手持式非电动工具.安全性要求.第9部分:模具研磨机
| Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders; German version EN 792-9:2001
|
DIN EN ISO 8662-4-1995
| 手提式便携电动工具.手柄振动的测量.第4部分:磨床 (ISO 8662-4:1994); 德文版本 EN ISO 8662-4:1995
| Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders (ISO 8662-4:1994); German version EN ISO 8662-4:1995
|
DIN EN ISO 8780-5-1995
| 颜料和稀释剂.色散特性评估用色散方法.第5部分:色散用自动研磨机 (ISO 8780-5:1990); 德文版本 EN ISO 8780
| Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller (ISO 8780-5:1990); German version EN ISO 8780-5:1995
|
DIN ISO 15637-1-2004
| 筒形研套的夹紧装置.第1部分:手持式研磨机用带柄的夹紧装置
| Holding fixtures of cylindrical abrasive sleeves - Part 1: Holding fixtures with shank for hand-held grinding machines (ISO 15637-1:2002)
|
DIN ISO 15637-2-2004
| 筒形砂套的夹紧装置.第2部分:固定磨床的夹紧装置
| Holding fixtures of cylindrical abrasive sleeves - Part 2: Holding fixtures for stationary machines (ISO 15637-2:2002)
|
DIN ISO 1985-1999
| 机床.立轴往复工作台的平面磨床的检验条件.精度检验
| Machine tools - Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy (ISO 1985:1998)
|
DIN ISO 2407-1999
| 机床.有水平轴的内圆磨床的试验条件.精度试验
| Machine tools - Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy (ISO 2407:1997)
|
EN 13218-2002
| 机床 安全性 固定磨床
| Machine tools - Safety - Stationary grinding machines
|
EN 1813-1997
| 铺地织物 用研磨机器对羊毛纤维完整性的测定
| Textile floor coverings - Determination of wool fibre integrity using an abrasion machine
|
EN 27787-3-1993
| 牙科旋转器械 切割工具 第3部分:技工室研磨机用质合金刀具
| Dental rotary instruments; Cutters; Part 3: Carbide laboratory cutters for milling machines (ISO 7787-3:1991)
|
EN 50144-2-3-2002
| 手持电动工具的安全性 第2-3部分:研磨机、圆盘磨光机和抛光机的特殊要求
| Safety of hand-held electric motor operated tools - Part 2-3: Particular requirements for grinders, disk type sanders and polishers
|
EN 50144-2-3-2002
| 手持电动工具的安全性 第2-3部分:研磨机、圆盘磨光机和抛光机的特殊要求
| Safety of hand-held electric motor operated tools - Part 2-3: Particular requirements for grinders, disk type sanders and polishers
|
EN 60745-2-4-2003
| 手持电动工具 安全 第2-4部分:除圆盘型以外的磨光机和抛光机的特殊要求
| Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type (IEC 60745-2-4:2002, modified)
|
EN 792-7-2001
| 手持式非电动工具 安全要求 第7部分:研磨机
| Hand-held non-electric power tools - Safety requirements - Part 7: Grinders
|
EN 792-8-2001
| 手持式非电动工具 安全要求 第8部分:抛光机和磨沙机
| Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers
|
EN 792-9-2001
| 手持式非电动工具 安全要求 第9部分:硬模研磨机
| Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders
|
EN ISO 8662-13-1997
| 便携式手提动力工具 手柄振动测量 第13部分:模具研磨机
| Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders (ISO 8662-13:1997)
|
EN ISO 8662-4-1995
| 便携式手提动力工具 手柄振动测量 第4部分:磨床
| Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders (ISO 8662-4:1994)
|
EN ISO 8662-8-1997
| 便携式手提动力工具 手柄振动测量 第8部分:抛光机和旋转式轨道和特殊轨道磨光机
| Hand-held portable power tools - Measurement of vibrations at the handle - Part 8: Polishers and rotary, orbital and random orbital sanders (ISO 8662-8:1997)
|
EN ISO 8780-4-1995
| 颜料和体质颜料 评定分散性的分散方法 第4部分:用压研磨机分散
| Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 4: Dispersion using a bead mill (ISO 8780-4:1990)
|
EN ISO 8780-5-1995
| 颜料和体质颜料 评定分散性的分散方法 第5部分:用自动研磨机分散
| Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller (ISO 8780-5:1990)
|
EN ISO 8780-6-1995
| 颜料和体质颜料 评定分散性的分散方法 第6部分:用三辕研磨机分散
| Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 6: Dispersion using a triple-roll mill (ISO 8780-6:1990)
|
GB 3883.3-2007
| 手持式电动工具的安全 第二部分:砂轮机、抛光机和盘式砂光机的专用要求
| Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for grinders, polishers and disk-type sanders
|
GB 3883.4-2005
| 手持式电动工具的安全第二部分:非盘式砂光机和抛光机的专用要求
| Safety of hand-held motor-operated electric tools Part 2:Particular requirements for sanders and polishers other than disk type
|
GB/T 4022.1-2007
| 卧轴矩台平面磨床 精度检验 第1部分:工作台面长度至1600mm的机床
| Surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of the accuracy - Part 1:Machines with a table surface length of up to 1600 mm
|
GB/T 4681-2007
| 无心外圆磨床 精度检验
| External cylindrical centreless grinding machines - Testing of the accuracy
|
GB/T 4682-2007
| 内圆磨床 精度检验
| Internal cylindrical grinding machines with horizontal spindle - Testing of the accuracy
|
GB/T 4685-2007
| 外圆磨床 精度检验
| External cylindrical grinding machines - Testing of the accuracy
|
GB/T 5288-2007
| 龙门导轨磨床 精度检验
| Slideways grinding machines with two columns - Testing of the accuracy
|
GB/T 6476-2007
| 立轴矩台平面磨床 精度检验
| Surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy |
GB/T 6477.6-1986
| 金属切削机床术语磨床
| Terminology for metal-cutting machine tools--Grinding machines
|
IEC 60745-2-3-2006
| 手持式电动工具的安全 第2-3部分:电动砂轮机、抛光机和盘式砂光机的特殊要求
| Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
|
IEC 60745-2-4-2006
| 手持式电动工具的安全.第2-4部分:盘式除外的砂轮机和抛光机的特殊要求
| Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
|
ISO 1985-1998
| 机床 立轴矩台平面磨床检验条件 精度检验
| Machine tools - Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy
|
ISO 1986-1-2001
| 带有卧轴和往复式台的平面磨床的检验条件 精度检验 第1部分:台长为1600mm以下的磨床
| Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of the accuracy - Part 1: Machines with a table length of up to 1600 mm
|
ISO 2407-1997
| 卧轴内圆磨床检验条件 精度检验
| Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy
|
ISO 2433-1999
| 机床 工作台移动式万能外圆磨床检验条件 精度检验
| Machine tools - Test conditions for external cylindrical and universal grinding machines with a movable table - Testing of the accuracy
|
ISO 3875-2004
| 机床.外圆无心磨床试验条件.精度检验
| Machine tools - Test conditions for external cylindrical centreless grinding machines - Testing of the accuracy
|
ISO 4703-2001
| 两柱式表面磨床检验条件 导轨磨床 精度检验
| Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy
|
ISO 7787-3-1991
| 牙科旋转器械 切割工具 第3部分:技工室研磨机用硬质合金刀具
| Dental rotary instruments; cutters; part 3: carbide laboratory cutters for milling machines
|
ISO 8662-13 Technical Corrigendum 1-1998
| 便携式手提动力工具 手柄振动测量 第13部分:模具研磨机 技术勘误1
| Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders; Technical Corrigendum 1
|
ISO 8662-13-1997
| 便携式手提动力工具 手柄振动测量 第13部分:模具研磨机
| Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders
|
ISO 8662-4-1994
| 便携式手提动力工具 手柄振动测量 第4部分:磨床
| Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders
|
ISO 8662-8-1997
| 便携式手提动力工具 手柄振动测量 第8部分:抛光机和旋转式轨道和特殊轨道磨光机
| Hand-held portable power tools - Measurement of vibrations at the handle - Part 8: Polishers and rotary, orbital and random orbital sanders
|
ISO 8780-4-1990
| 颜料和体质颜料.评定分散性的分散方法.第4部分:用压研磨机分散
| Pigments and extenders; methods of dispersion for assessment of dispersion characteristics; part 4: dispersion using a bead mill
|
ISO 8780-5-1990
| 颜料和体质颜料.评定分散性的分散方法.第5部分:用自动研磨机分散
| Pigments and extenders; methods of dispersion for assessment of dispersion characteristics; part 5: dispersion using an automatic muller
|
ISO 8780-6-1990
| 颜料和体质颜料.评定分散性的分散方法.第6部分:用三辕研磨机分散
| Pigments and extenders; methods of dispersion for assessment of dispersion characteristics; part 6: dispersion using a triple-roll mill
|
ISO/TR 27609-2007
| 手持工具的振动.研磨机振动测量方法.系列试验评估
| Vibration in hand-held tools - Vibration measurement methods for grinders - Evaluation of round-robin test
|
JB 4029-2000
| 磨床砂轮防护罩 安全技术要求
| ()
|
JB/T 10122-1999
| 机床夹具零件及部件 磨床用快换卡头
| ()
|
JB/T 10142-1999
| 超声抛光机 技术条件
| ()
|
JB/T 10578-2006
| 导轨磨床 参数
| ()
|
JB/T 10602.1-2006
| 龙门平面磨床 第1部分:参数
| Double column surface grinding machines-Part 1:Parameters
|
JB/T 10602.2-2007
| 龙门平面磨床 第2部分:精度检验
| ()
|
JB/T 10602.3-2007
| 龙门平面磨床 第3部分:技术条件
| ()
|
JB/T 10790.1-2007
| 数控强力成形磨床 第1部分:型式与参数
| CNC creep feed profile grinding machines-Part 1:Types and parameters
|
JB/T 10790.2-2007
| 数控强力成形磨床 第2部分:精度检验
| CNC creep feed profile grinding machines-Part 2:Testing of the accuracy
|
JB/T 10790.3-2007
| 数控强力成形磨床 第3部分:技术条件
| CNC creep feed profile grinding machines-Part 3:Specifications
|
JB/T 1579-1999
| 精密卧轴矩台平面磨床 精度检验
| ()
|
JB/T 2617.1-1999
| 曲轴磨床 参数
| ()
|
JB/T 2617.2-1999
| 曲轴磨床 精度检验
| ()
|
JB/T 2617.3-2007
| 曲轴磨床 第3部分:技术条件
| Crankshaft grinder-Part 3:Specifications
|
JB/T 2858.1-1999
| 螺纹磨床 参数
| ()
|
JB/T 2858.3-1999
| 螺纹磨床 精度检验
| ()
|
JB/T 2858.4-1999
| 螺纹磨床 技术条件
| ()
|
JB/T 2903.1-2007
| 丝锥磨床 第1部分:型式与参数
| Tap grinding machines-Part 1:Tyes and parameters
|
JB/T 2903.2-2007
| 丝锥磨床 第2部分:精度检验
| Tap grinding machines-Part 2:Testing of the accuracy
|
JB/T 2903.3-2007
| 丝锥磨床 第3部分:技术条件
| ()
|
JB/T 2999.1-1998
| 凸轮轴磨床 参数
| ()
|
JB/T 2999.2-1998
| 凸轮轴磨床 精度检验
| ()
|
JB/T 2999.3-1998
| 凸轮轴磨床 技术条件
| ()
|
JB/T 3382.2-2000
| 卧轴矩台平面磨床 技术条件
| ()
|
JB/T 3382.3-2006
| 卧轴矩台平面磨床 第3部分:参数
| ()
|
JB/T 3870.1-1999
| 卡规磨床 精度检验
| ()
|
JB/T 3870.2-2007
| 卡规磨床 第2部分:技术条件
| Calipers grinding machine-Part 2:Specifications
|
JB/T 3875.1-1999
| 万能工具磨床 参数
| ()
|
JB/T 3875.2-1999
| 万能工具磨床 精度检验
| ()
|
JB/T 3875.3-2007
| 万能工具磨床 第3部分:技术条件
| Universal tool and cutter grinding machines-Part 3:Specifications
|
JB/T 4065.1-1999
| 滚刀铲磨床 参数
| ()
|
JB/T 4065.3-1999
| 滚刀铲磨床 精度检验
| ()
|
JB/T 4065.4-1999
| 滚刀铲磨床 技术条件
| ()
|
JB/T 4071.1-2007
| 轴承套圈磨床 第1部分:外表面磨床 精度检验
| Grinding machines for bearing ring-Part 1: Outer surface grinding machines-Testing of the accuracy
|
JB/T 4071.2-2007
| 轴承套圈磨床 第2部分:内表面磨床 精度检验
| Grinding machines for bearing ring-Part 2: Inner surface grinding machines-Testing of the accuracy
|
JB/T 4071.3-2007
| 轴承套圈磨床 第3部分:技术条件
| ()
|
JB/T 4096-1999
| 高精度卧轴矩台平面磨床 精度检验
| ()
|
JB/T 4145.1-1999
| 落地导轨磨床 精度检验
| ()
|
JB/T 4145.2-1999
| 落地导轨磨床 技术条件
| ()
|
JB/T 4147-1999
| 龙门导轨磨床 技术条件
| ()
|
JB/T 4183.2-1999
| 立轴矩台平面磨床 技术条件
| ()
|
JB/T 4183.3-2006
| 立轴矩台平面磨床 第3部分:参数
| ()
|
JB/T 6090-2007
| 抛光机
| ()
|
JB/T 6091.1-2007
| 坐标磨床 第1部分:参数
| ()
|
JB/T 6091.2-2007
| 坐标磨床 第2部分:精度检验
| ()
|
JB/T 6091.3-2007
| 坐标磨床 第3部分:技术条件
| ()
|
JB/T 6197.1-1999
| 剪切刀片刃磨床 精度检验
| ()
|
JB/T 6197.2-1999
| 剪切刀片刃磨床 技术条件
| ()
|
JB/T 6197.3-2007
| 剪切刀片刃磨床 第3部分:型式与参数
| Shearing cutter sharpening machines-Part 3:Types and parameters
|
JB/T 6340.1-2008
| 轧辊磨床 第1部分:型式与参数
| Roll grinding machine-Part 1:Types and parameters
|
JB/T 6340.2-2007
| 轧辊磨床 第2部分:砂轮架移动式轧辊磨床 技术条件
| ()
|
JB/T 6340.3-2008
| 轧辊磨床 第3部分:砂轮架移动式磨床精度检验
| Roll grinding machine-Part 3:Grinding machine with wheelhead moving style-Testing of the accuracy
|
JB/T 7418.1-2006
| 外圆磨床 第1部分:参数
| ()
|
JB/T 7418.2-2007
| 外圆磨床 第2部分:技术条件
| ()
|
JB/T 8078-1999
| 轴承外圈内表面磨床 参数
| ()
|
JB/T 8079.1-1999
| 轴承内圈外表面磨床 参数
| ()
|
JB/T 8080-1999
| 轴承内圈内表面磨床 参数
| ()
|
JB/T 8826-1998
| 磨床动静压支承润滑油箱
| ()
|
JB/T 9161.1-1999
| 外圆磨床顶尖 尺寸
| ()
|
JB/T 9161.10-1999
| 内圆磨床接杆用螺钉 尺寸
| ()
|
JB/T 9161.2-1999
| 外圆磨床平顶尖 尺寸
| ()
|
JB/T 9161.3-1999
| 内圆磨床接杆 A型 尺寸
| ()
|
JB/T 9161.4-1999
| 内圆磨床接杆 B型 尺寸
| ()
|
JB/T 9161.5-1999
| 内圆磨床接杆 C型 尺寸
| ()
|
JB/T 9161.6-1999
| 内圆磨床接杆 D型 尺寸
| ()
|
JB/T 9161.7-1999
| 内圆磨床接杆 E型 尺寸
| ()
|
JB/T 9161.8-1999
| 内圆磨床接杆 F型 尺寸
| ()
|
JB/T 9161.9-1999
| 内圆磨床接杆 G型 尺寸
| ()
|
JB/T 9904.2-1999
| 花键轴磨床 精度检验
| ()
|
JB/T 9904.3-1999
| 花键轴磨床 技术条件
| ()
|
JB/T 9904.4-2006
| 花键轴磨床 第4部分:参数
| ()
|
JB/T 9905.2-1999
| 无心外圆磨床 技术条件
| ()
|
JB/T 9905.3-2006
| 无心外圆磨床 第3部分:参数
| ()
|
JB/T 9906.2-1999
| 内圆磨床 技术条件
| ()
|
JB/T 9906.3-2006
| 内圆磨床 第3部分:参数
| ()
|
JB/T 9907.2-2000
| 双端面磨床 制造与验收技术要求
| ()
|
JB/T 9907.3-2006
| 双端面磨床 第3部分:参数
| ()
|
JB/T 9908.1-1999
| 卧轴圆台平面磨床 参数
| ()
|
JB/T 9908.3-1999
| 卧轴圆台平面磨床 精度检验
| ()
|
JB/T 9908.4-1999
| 卧轴圆台平面磨床 技术条件
| ()
|
JB/T 9909.2-1999
| 立轴圆台平面磨床 精度检验
| ()
|
JB/T 9909.3-1999
| 立轴圆台平面磨床 技术条件
| ()
|
JB/T 9909.4-2006
| 立轴圆台平面磨床 第4部分:参数
| ()
|
JB/T 9910.1-1999
| 高精度卧轴圆台平面磨床 精度检验
| ()
|
JB/T 9910.2-1999
| 高精度卧轴圆台平面磨床 技术条件
| ()
|
JB/T 9912.2-1999
| 光学曲线磨床 精度检验
| ()
|
JB/T 9912.3-1999
| 光学曲线磨床 技术条件
| ()
|
JB/T 9912.4-2006
| 光学曲线磨床 第4部分:参数
| ()
|
JB/T 9914-1999
| 高精度外圆磨床 精度检验
| ()
|
JB/T 9915-1999
| 立轴双端面磨床 精度检验
| ()
|
JB/T 9916-1999
| 卧轴双端面磨床 精度检验
| ()
|
JB/T 9917.1-1999
| 多用磨床 精度检验
| ()
|
JB/T 9917.2-1999
| 多用磨床 技术条件
| ()
|
JB/T 9919-1999
| 高精度无心外圆磨床 精度检验
| ()
|
JB/T 9925.1-1999
| 蜗杆磨床 精度检验
| ()
|
JB/T 9925.2-1999
| 蜗杆磨床 技术条件
| ()
|
JB/T 9926.1-1999
| 内螺纹磨床 精度检验
| ()
|
JB/T 9926.2-1999
| 内螺纹磨床 技术条件
| ()
|
JC/T 970.1-2005
| 陶瓷瓷质砖抛光技术装备 第1部分:抛光机
| ()
|
JIS B6211-2006
| 水平轴内圆磨床试验条件.精度检验
| Test conditions for internal cylindrical grinding machines with horizontal spindle -- Testing of the accuracy
|
JIS B6212-2006
| 机床.工作台移动式万能外圆磨床检验条件.精度检验
| Machine tools -- Test conditions for external cylindrical and universal grinding machines with a movable table -- Testing of the accuracy
|
JIS B6213-2006
| 水平磨轮轴和往复工作台式平面磨床的试验条件.精度检验
| Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table -- Testing of the accuracy
|
JIS B6214-1996
| 带立式磨轮轴和旋转工作台的平面磨床.精度检验
| Surface grinding machines with vertical grinding wheel spindle and rotary table -- Testing for the accuracy
|
JIS B6220-1999
| 外圆无心磨床.精度检验
| External cylindrical centreless grinding machines -- Testing of the accuracy
|
JIS B6251-2004
| 机床.带垂直研磨轮轴和往复式台的表面研磨机的试验条件.精确性试验
| Machine tools -- Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table -- Testing of the accuracy
|
JIS B6335-1986
| 数控外圆磨床和万能磨床性能和加工精度试验规程
| Test code for performance and accuracy of numerically controlled external cylindrical and universal grinding machines
|
JIS B6543-1991
| 旋板刀磨床.试验和检验方法
| Veneer knife grinders -- Test and inspection methods
|
JIS B6545-1991
| 辊式抛光机.试验和检验方法
| Drum sanders -- Test and inspection methods
|
JIS B6546-1991
| 宽面砂带抛光机.试验和检验方法
| Wide belt sanders -- Test and inspection methods
|
JIS B7762-4-2006
| 便携式手提动力工具.手柄振动测量.第4部分:磨床
| Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 4: Grinders
|
JIS B7762-8-2006
| 便携式手提动力工具.手柄振动测量.第8部分:抛光机和旋转式轨道和特殊轨道磨光机
| Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 8: Polishers and rotary, orbital and random orbital sanders
|
JIS C9610 AMD 1-2006
| 便携式电动研磨机(修改件1)
| Portable electric grinders (Amendment 1)
|
JIS C9610-1976
| 便携式电动研磨机
| Portable electric grinders
|
JIS C9745-2-3-1999
| 手提式电动工具的安全.第2部分:磨床、抛光机和砂轮磨光机的特殊要求
| Safety of hand-held motor-operated electric tools -- Part 2: Particular requirements for grinders, polishers and disk-type sanders
|
JIS C9745-2-3-1999
| 手提式电动工具的安全.第2部分:磨床、抛光机和砂轮磨光机的特殊要求
| Safety of hand-held motor-operated electric tools -- Part 2: Particular requirements for grinders, polishers and disk-type sanders
|
JIS K5101-1-3-2004
| 颜料试验方法.第1部分:分散特性评估的分散方法.第3节:高速叶轮研磨机
| Test methods for pigments -- Part 1: Methods of dispersion for assessment of dispersion characteristics -- Section 3: A high-speed impeller mill
|
JIS K5101-1-4-2004
| 颜料试验方法.第1部分:分散特性评估的分散方法.第4节:钢珠研磨机
| Test methods for pigments -- Part 1: Methods of dispersion for assessment of dispersion characteristics -- Section 4: A bead mill
|
JIS K5101-1-5-2004
| 颜料试验方法.第1部分:分散特性评估的分散方法.第5节:真空自动研磨机
| Test methods for pigments -- Part 1: Methods of dispersion for assessment of dispersion characteristics -- Section 5: A Hoover automatic muller
|
JIS K5101-1-6-2004
| 颜料试验方法.第1部分:分散特性评估的分散方法.第6节:三轴研磨机
| Test methods for pigments -- Part 1: Methods of dispersion for assessment of dispersion characteristics -- Section 6: A triple-roll mill
|
JIS R6211-12-2003
| 粘合磨料产品.尺寸.第12部分:在卧式磨床上去毛刺和精整用砂轮
| Bonded abrasive products -- Dimensions -- Part 12: Grinding wheels for deburring and fettling on a straight grinder
|
JIS R6211-13-2003
| 粘合磨料产品.尺寸.第13部分:在立式磨床上去毛刺和精整用砂轮
| Bonded abrasive products -- Dimensions -- Part 13: Grinding wheels for deburring and fettling on a vertical grinder
|
JIS R6211-14-2003
| 粘合磨料产品.尺寸.第14部分:在角度磨床上去毛刺和精整/打磨用砂轮
| Bonded abrasive products -- Dimensions -- Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder
|
JIS T5506-3-2001
| 牙科旋转仪器.切削工具.第3部分:硬质合金实验室切削工具. 研磨机
| Dental rotary instruments -- Cutters -- Part 3: Carbide laboratory cutters -- Milling machines
|
NF E60-001-1982
| 磨床.外旋转表面.综合0.多种语言名细表.应用
| (External cylindrical grinding machines. General. Terminology. Utilisation.)
|
NF E60-002-1982
| 磨床.水平轴线砂轮轴平面.综述.多种语言名称.应用
| (Surface grinding machines with horizontal grinding wheel spindle. General. Terminology. Utilisation.)
|
NF E60-003-1982
| 磨床.无中心外旋转表面.综述.多种语言名名称.应用
| (Cylindrical external centreless grinding machines. General. Terminology. Utilisation.)
|
NF E60-121-2002
| 有水平磨砂轮轴和往复式工作台的平面磨床的试验条件.精度试验.第1部分:工作台长度最长达1600mm的机床
| (Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of accuracy - Part 1 : machines with a table length up to 1 600 mm.)
|
NF E60-123-1984
| 横轴内旋转圆磨床.验收条件.精确度检验
| (ACCEPTANCE CONDITIONS FOR INTERNAL CYLINDRICAL GRINDING MACHINES WITH HORIZONTAL SPINDLE. TESTING OF ACCURACY.)
|
NF E60-124-1984
| 带移动台外旋转圆磨床.验收条件.精确度检验
| (TEST CONDITIONS FOR EXTERNAL CYLINDRICAL GRINDING MACHINES WITH A MOVABLE TABLE. TESTING OF ACCURACY.)
|
NF E60-126-2001
| 双柱式平面磨床的试验条件.导轨磨床.精度试验
| (Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy.)
|
NF E60-127-1989
| 立式磨床.验收条件.精确度检验
| (Machine tools. Vertical grinding machines. Acceptance conditions. Testing of accuracy.)
|
NF E60-276-1990
| 机床.噪音测量的常规工作条件.带锯刀的研磨机切断机床
| (Machine-tools. Conventional working conditions for measurement of noise. Grinder-cutting-off machines with cuttersaws.)
|
NF E60-400-2002
| 机床.安全性.固定式磨床
| (Machine-tools - Safety - Stationary grinding machines.)
|
NF E62-116-1986
| 磨床.砂轮安装用法兰盘.设计规则.试验
| (GRINDING MACHINES. FLANGES FOR THE MOUNTING OF GRINDING WHEELS. DESIGN RULES. TESTING METHOD.)
|
NF E63-608-1996
| 橡胶和塑料加工机械.双辊研磨机.安全要求(欧洲标准EN 1417)
| (RUBBER AND PLASTICS MACHINES. TWO ROLL MILLS. SAFETY REQUIREMENTS. (EUROPEAN STANDARD EN 1417).)
|
NF E65-100-7-2002
| 手持非电动工具.安全要求.第7部分:磨床
| (Hand-held non-electric power tools - Safety requirements - Part 7 : grinders.)
|
NF E65-100-9-2001
| 手持式非电动工具.安全要求.第9部分:模研磨机
| (Hand-held non-electric power tools - Safety requirements - Part 9 : die grinders.)
|
NF E90-321-1-1995
| 手持便携式动力工具.测量手柄的颤动.第四部分:磨床
| (Hand-held portable power tools. Measurement of vibrations at the handle. Part 4 : grinders.)
|
NF G37-121-1999
| 橡胶或塑料涂层织物.耐磨强度的测定.第1部分:TABER研磨机
| (Rubber- or plastics-coated fabrics. Determination of abrasion resistance. Part 1 : Taber abrader.)
|
NF T31-210-5-1995
| 颜料和稀释剂.色散特性评定用色散方法.第5部分:色散用自动研磨机
| (PIGMENTS AND EXTENDERS. METHODS OF DISPERSION FOR ASSESSMENT OF DISPERSION CHARACTERISTICS. PART 5 : DISPERSION USING AN AUTOMATIC MULLER. (EUROPEAN STANDARD EN ISO 8780-5).)
|
QB/T 1448-1992
| 刀剪磨床
| ()
|
UL 561-1997
| 地板抛光机
| (Floor-finishing machines )
|
UL 745-2-3-1995
| 研磨机、抛光机和盘式砂轮机特殊要求
| (Particular requirements for grinders, polishers and disk-type sanders )
|
UL 745-2-3-1995
| 研磨机、抛光机和盘式砂轮机特殊要求
| (Particular requirements for grinders, polishers and disk-type sanders )
|
UL 745-4-3-1995
| 由蓄电池供电的研磨机、磨光器和盘形砂轮机特殊要求
| (Particular requirements for battery-operated grinders, polishers, and disk-type sanders )
|
prEN 13035-10-1997
| 平板玻璃制造、处理和加工用机械和设备 安全要求 第10部分:研磨和抛光机
| Maschines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 10: Grinding and polishing machines
|
编号 | 中文名称 | 英文名称 |