5分钟获取标准报价 咨询电话:010-6973-5438 QQ:31794-7760 MSN:wwtrans#126.com
首页 ANSI ASME API ASTM IEEE ISA DIN BS ISO NF JIS EN

 

ANSI——美国国家标准学会翻译目录查询

宽天下
咨询热线:010-6973-5438
标准号
中文名称
英文名称
 ANSI/AWWA F 101-1996  接触模压制的玻璃纤维增强的塑料洗涤水水槽和流槽  Contact Molded, Fiberglass Reinforced Plastic Washwater Troughs and Launders
 ANSI/AWWA F 101a-1996  接触模压制的玻璃纤维增强的塑料洗涤水水槽和流槽  Contact-Molded, Fiberglass-Reinforced Plastic Wash Water Troughs and Launders
 ANSI/AWWA F 102-1996  配对硬模压塑的玻璃纤维增强的塑料堰板、浮渣档板和安装支架  Matched-Die Molded, Fiberglass Reinforced Plastic Weir Plates, Scum Baffles, and Mounting Brackets
 ANSI/AWWA F 102a-1996  配对硬模压塑的玻璃纤维增强的塑料堰板、浮渣档板和安装支架  Matched-Die-Molded, Fiberglass-Reinforced Plastic Weir Plates, Scum Baffles and Mounting Brackets
 ANSI/AWWA G100-2005  水处理设备的操作和管理  
 ANSI/AWWA G200-2004  分布式系统操作和管理  
 ANSI/BHMA A 156.1-1997  对头和铰链  Butts and Hinges
 ANSI/BHMA A 156.13-2002  锁和门闩、锁眼  Locks and Latches, Mortise
 ANSI/BHMA A 156.15-1995  关门者手持放松装置  Closer Holder Release Devices
 ANSI/BHMA A 156.21-2001  门槛  Thresholds
 ANSI/BHMA A 156.22-1996  门垫圈系统  Door Gasketing Systems
 ANSI/BHMA A 156.29-2001  出口锁.带报警器的出口锁.出口报警器.出口装置用报警器  Exit Locks, Exit Locks With Exit Alarms, Exit Alarms, Alarms for Exit Devices
 ANSI/BHMA A 156.3-2001  逃生设备  Exit Devices
 ANSI/BHMA A 156.31-2001  装有撞针和弹体的电气致动器  Electric Strikes and Frame Mounted Actuators
 ANSI/BHMA A 156.6-1994  建筑门细木工  Architectural Door Trim
 ANSI/BHMA A 156.7-1988  样板铰链尺寸  Template Hinge Dimensions
 ANSI/BHMA A 156.9-1994  厨柜五金  Cabinet Hardware
 ANSI/BHMA A156.11-2004  柜锁  
 ANSI/BHMA A156.13-2002  锁和门闩、锁眼  (Locks and Latches, Mortise )
 ANSI/BHMA A156.14-2002  推拉门和折叠门用小五金  (Sliding and Folding Door Hardware )
 ANSI/BHMA A156.16-2002  辅助硬件  (Auxiliary Hardware )
 ANSI/BHMA A156.17-2004  自闭式铰链和枢轴  
 ANSI/BHMA A156.19-2002  动力辅助以及低能动力控制门  (Power Assist and Low-Energy Power-Operated Doors )
 ANSI/BHMA A156.2-2003  已钻孔及预组装的锁和碰锁  (Bored and Preassembled Locks and Latches )
 ANSI/BHMA A156.22-2003  门垫圈系统  (Door Gasketing Systems )
 ANSI/BHMA A156.23-2004  电磁锁  
 ANSI/BHMA A156.24-2003  出口处延时锁  (Delayed Egress Locks )
 ANSI/BHMA A156.25-2002  电气锁紧装置  (Electrified Locking Devices )
 ANSI/BHMA A156.27-2003  行人用机动和手动的旋转门  (Power and Manual Operated Revolving Pedestrian Doors )
 ANSI/BHMA A156.30-2002  插锁  (Mortise Locks )
 ANSI/BHMA A156.7-2002  样板铰链尺寸  (Template Hinge Dimensions )
 ANSI/BHMA A156.9-2003  厨柜五金  (Cabinet Hardware )
 ANSI/BIFMA X 5.2-1997  锉的侧面试验  Files, Tests for Lateral
 ANSI/BIFMA X 5.3-1997  锉的垂直试验  Files, Tests for Vertical
 ANSI/BIFMA X 5.4-1997  客厅座椅试验  Lounge Seating, Tests for
 ANSI/BIFMA X 5.5-1998  写字台产品的试验  Desk Products, Tests for
 ANSI/BIFMA X5.6-2003  办公家具.大板体系.试验  (Office Furnishings - Panel Systems - Tests )
 ANSI/BIFMA/SOHO S 6.5-2001  小型办公室/家庭办公室家具.检验  Small Office/Home Office Furniture -Tests
 ANSI/BISSC Z50.2-2003  烘烤设备.环境卫生标准  (Bakery Equipment - Sanitation Standard )
 ANSI/BSR/IEEE 1434-2000  旋转电机内局部放电测量指南(试验使用的标准-非美国国家标准)  Trial-Use Guide to the Measurement of Partial Discharges in Rotating Machinery (TRIAL USE STANDARD - NOT AN AMERICAN NATIONAL STANDARD)
 ANSI/CAGI ADF 300-1998  干塔脱水压缩空气干燥器.额定功率和试验方法  Single Tower (Non-Regenerative) Desiccant Compressed Air Dryers - Methods for Testing and Rating
 ANSI/CAGI ADF 400-1999  试验和额定凝聚分离器  Testing and Rating Coalescing Filters
 ANSI/CAGI ADF 500-1998  石油蒸气吸收过滤器吸收容量的测定  Measurement of Absorbtion Capacity of Oil Vapor Removal Absorbent Filters
 ANSI/CAGI ADF 700-1998  膜式压缩空气干燥器.额定功率和试验方法  Membrane Compressed Air Dryers - Methods for Testing and Rating
 ANSI/CAM-I 0102, SOI-1996  标准操作者接口(SOI),原版2.0和格式指南  Standard Operator Interface (SOI), Prototype Version 2.0 and Style Guide
 ANSI/CAM-I 101-1995  尺寸测量接口标准  Dimensional Measuring Interface Standard
 ANSI/CAM-I 102, SOI-1996  标准操作者接口(SOI),原版2.0和格式指南  Standard Operator Interface (SOI), Prototype Version 2.0 and Style Guide
 ANSI/CAM-I 104.0Part 2-2003  尺寸测量接口标准.第2部分:对像接口规范  (Dimensional Measuring Interface Standard - Part 2 - Object Interface Specification )
 ANSI/CAM-I 105.0Part 1-2005  尺寸测量接口标准(DMIS 第五版第1部分)  
 ANSI/CAP SNOMED-1-2003  医疗保健术语结构  (Healthcare Terminology Structure )
 ANSI/CEA 2028-2005  户外电视接收天线色码  
 ANSI/CEA 2030-2005  多用室内音频电缆标准  
 ANSI/CEA 2032-2005  室内电视(TV)接收天线性能标准  
 ANSI/CEA 621-A-2004  电子工业协会.消费者电子类产品和包装条码标准  
 ANSI/CEMA 102-1994  输送机术语和定义  Conveyor Terms and Definitions
 ANSI/CEMA 102-2002  输送机术语和定义  (Conveyor Terms and Definitions )
 ANSI/CEMA 300-2003  螺旋输送机尺寸标准  (Screw Conveyor Dimensional Standards )
 ANSI/CEMA 350-2003  散货用螺旋输送机  (Screw Conveyors for Bulk Materials )
 ANSI/CEMA 401-1994  成件搬运输送机.无动力辊子输送机  Unit Handling Conveyors - Roller Conveyors - Non-Powered
 ANSI/CEMA 401-2003  无动力辊式输送机  (Roller Conveyors Non-Powered )
 ANSI/CEMA 402-1992  成件搬运输送机.皮带输送机  Unit Handling Conveyors - Belt Conveyors
 ANSI/CEMA 402-2003  皮带输送机  (Belt Conveyors )
 ANSI/CEMA 403-2003  皮带传动辊式输送机  (Belt Driven Live Roller Conveyors )
 ANSI/CEMA 404-2003  链传动辊式输送机  (Chain Driven Live Roller Conveyors )
 ANSI/CEMA 405-2003  板条式输送机  (Slat Conveyors )
 ANSI/CEMA 406-2003  轴传动辊式输送机  (Lineshaft Driven Live Roller Conveyors )
 ANSI/CEMA 501.1-1988  焊接钢翼托辊规格  Welded Steel Wing Pulleys, Specifications for
 ANSI/CEMA 501.1-2003  焊接钢翼轮规范  (Welded Steel Wing Pulleys, Specifications for )
 ANSI/CEMA 550-1970  散装材料的分类和定义  Classification and Definitions of Bulk Materials
 ANSI/CEMA 550-2003  散装物料的分类和定义  (Classification and Definitions of Bulk Materials )
 ANSI/CEMA B 105.1-1992  焊接钢传输滑轮规范  Specifications for Welded Steel Conveyor Pulleys
 ANSI/CGA E-7-1992  医用气体调节器和流量计  Medical Gas Regulators and Flowmeters
 ANSI/COS/NASPEC SUPPLEMENT2004-2004  冷成形钢结构件的设计用北美规范的补充2004.2001年版  
 ANSI/CSA AmericaFC 1-2004  燃料电池动力装置  
 ANSI/CSA AmericaFC 1-2004  燃料电池动力装置  (Fuel Cell Power Plants (same as CGA 12.10) )
 ANSI/CSA FC3-2004  便携式燃料电池动力系统  
 ANSI/CSA LC-1b-2001  使用波纹不锈钢管(CSST)的燃料气体管道系统  Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing (CSST) (same as CSA 6.26b)
 ANSI/CSA LC-3-2000  使用标准  Appliance Stands
 ANSI/CSA NGV 2-2000  压缩天然气车辆(NGV)燃料容器的基本要求  Basic Requirements for Compressed Natural Gas Vehicle (NGV) Fuel Containers
 ANSI/CSA NGV 3.1-1995  天然气动力车辆的燃料系统件  Fuel System Components for Natural Gas Powered Vehicles
 ANSI/DASMA 102-1996  部分升降门规范  Specifications for Sectional Overhead Type Doors
 ANSI/DASMA 102-2004  部分升降门规范  
 ANSI/DASMA 103-2001  住宅部分车库门的平衡系统标准  Standard for Counterbalance Systems on Residential Sectional Garage Doors
 ANSI/DASMA 105-1992  车库门的热传递和透气率测试方法  Test Method for Thermal Transmittance and Air Infiltration of Garage Doors
 ANSI/DASMA 107-1997  使用泡沫塑料隔绝的车库门室内燃烧试验标准  Room Fire Test Standard for Garage Doors Using Foam Plastic Insulation
 ANSI/DASMA 109-2001  测试部分车库门的标准方法:耐久性性能的测定  Standard Method for Testing Sectional Garage Doors: Determination of Life Cycling Performance
 ANSI/DASMA 115-2003  车库门的标准试验方法:投掷物冲击和循环风压下结构性能的测定  (Standard Method for Testing Garage Doors: Determination of Structural Performance Under Missile Impact and Cyclic Wind Pressure )
 ANSI/DASMA 203-2004  不耐火滑动门标准  
 ANSI/DASMA 204-2004  耐火滑动门组件标准  
 ANSI/DHI A 115.12-1994  偏置中间心轴的1-3/4标准钢门和钢架预加工规范  Specifications for preparation of 1-3/4 Standard Steel Doors and Steel Frames for Offset Intermediate Pivots
 ANSI/DHI A 115.14-1994  全部向后打开的1-3/4标准钢门的预加工规范  Specifications for Preparation of 1-3/4 Standard Steel Doors for Open Back Strikes
 ANSI/DHI A 115.15-1994  4000系列有孔锁和门闩的1-3/4预吊起的隔绝钢门和门框预加工规范  Specifications for Preparation of 1-3/4 Prehung Insulated Steel Doors and Steel Frames for Series 4000 Bored Locks and Latches
 ANSI/DHI A 115.16-1994  门和五金的安装指南  Installation Guide for Doors and Hardware
 ANSI/DHI A 115.17-1994  双型锁1-3/8和1-3/4标准钢门和门框预加工规范  Specifications for Preparation of 1-3/8 and 1-3/4 Standard Steel Doors and Frames For Double Type Locks
 ANSI/DHI A 115.18-1994  1-3/8和1-3/4门的水平把手的有孔锁和闩标准钢门和钢门框的预加工规范  Specifications for Standard Steel Door and Steel Frame Preparation for Bored Locks and Latches with Lever Handles for 1-3/8 and 1-3/4 Doors
 ANSI/DHI A 115.1G-1994  门和五金的安装指南  Installation Guide for Doors and Hardware
 ANSI/DHI A 115.2-1996  系列4000钻孔锁和门闩的1-3/8和1-3/4的标准钢门和门框的预加工规范  Specifications for Preparation of 1-3/8 and 1-3/4 Standard Steel Doors and Frames for Series 4000 Bored Locks and Latches
 ANSI/DHI A 115.4-1994  手工操作的水平伸缩埋头门闩的1-3/4标准钢门和门框预加工规范  Specifications for Preparation of 1-3/4 Standard Steel Doors and Frames for Manually Operated Lever Extension Flush Bolts
 ANSI/DHI A 115.5-1992  榫眼辅助单闩锁杆的钢架预加工  Steel Frame Preparation for Mortise Auxiliary Deadlock Strikes
 ANSI/DHI A 115.6-1993  2000系列预组装门锁的1-3/4标准钢门和门框的预加工  Preparation of 1-3/4 Standard Steel Doors and Steel Frames for Series 2000 Preassembled Door Locks
 ANSI/DHI A 115.W 2-1993  4000系列孔锁和闩的1-3/4齐平木门的预加工  Preparation of 1-3/4 in Flush Wood Doors for Series 4000 Bored Locks and Latches
 ANSI/DHI A 115.W 3-1993  4000系列孔锁和闩的1-3/8齐平木门的预加工  Preparation of 1-3/8 in Flush Wood Doors for Series 4000 Bored Locks and Latches
 ANSI/DHI A 115.W 6-1993  双型锁1-3/4齐平木门预加工  Preparation of 1-3/4 in Flush Wood Doors for Double-Type Locks
 ANSI/DHI A 115.W 8-1993  有孔附属单闩锁和单闩门闩1-3/4齐平木门预加工  Preparation of 1-3/4 in Flush Wood Doors for Bored Auxiliary Deadlocks and Deadlatches
 ANSI/EIA 186-14E-1985  无源电子器件测试方法14:板的密封试验  Passive Electronic Component Parts - Test Method 14, Panel Seal Test
 ANSI/EIA 192-A-1967  石英晶体件的外形和插脚连接  Holder Outlines and Pin Connections for Quartz Crystal Units
 ANSI/EIA 198-1-E-1997  瓷介质电容器.级别I、II、III和IV  Ceramic Dielectric Capacitors, Classes I, II, III, and IV
 ANSI/EIA 209-A-1963  电子管、管座、管帽及管脚(包括密封塞)的尺寸特性  Electron Tubes, Bases, Caps, and Terminals (including Gages), Dimensional Characteristics of
 ANSI/EIA 227-A-1978  1英寸穿孔带  One-Inch Perforated Tape
 ANSI/EIA 236-C-1986  分立半导体器件的彩色编码  Color Coding of Discrete Semiconductor Devices
 ANSI/EIA 267-C-1990  数控机床的轴和运动的术语  Axis and Motion Nomenclature for Numerically Controlled Machines
 ANSI/EIA 274-D-1980  定位、仿形、仿形/定位的数控机床用可互换的可变程序块数据格式  Interchangeable Variable Block Data Format for Positioning, Contouring, and Contouring/Positioning Numerically Controlled Machines
 ANSI/EIA 276-A-1980  电动扬声器的验收测试  Loudspeakers, Acceptance Testing of Dynamic
 ANSI/EIA 280-C-1992  无焊绕接电连接  Solderless Wrapped Electrical Connections
 ANSI/EIA 310-D-1992  机架、面板和辅助设备  Racks, Panels, and Associated Equipment
 ANSI/EIA 319-A-1970  印制电路板的可焊性  Printed Wiring Boards, Solderability of
 ANSI/EIA 320-A-1992  二级管静态参数测量的热平衡条件  Thermal Equilibrium Conditions for Measurement of Diode Static Parameters
 ANSI/EIA 321-C-1987  半导体器件同名终端功能的标准号和多单半导体器件的单名称和牌号  Numbering of Like-Named Terminal Functions in Semiconductor Devices and Designation of Units in Multiple-Unit Semiconductor Devices
 ANSI/EIA 327-A-1976  涂覆标志材料的耐溶剂性  Solvent Resistance of Applied Marking Materials
 ANSI/EIA 339-1967  磁带层间粘附性的测试方法  Test Method - Layer-to-Layer Adhesion of Magnetic Tape
 
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102]
宽天下翻译公司 版权所有 2008