5分钟获取标准报价 咨询电话:010-6973-5438 QQ:31794-7760 MSN:wwtrans#126.com



 ANSI/ASTM D 4672-1991  测定聚氨酯原料共聚物水含量的试验方法  Test Methods for Polyurethane Raw Materials: Determination of Water Content of Polyols (08.03)
 ANSI/ASTM D 4673-1987  丙烯腈丁二烯苯乙烯共聚物模压和挤压材料的规范  Acrylonitrile-Butadiene-Styrene (ABS) Molding and Extrusion Materials, Specification for (08.03)
 ANSI/ASTM D 4674-1989  暴露在室内荧光灯和透过窗户的日光中的塑料颜色稳定性的加速测试试验方法  Accelerated Testing for Color Stability of Plastics Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight, Test Method for (08.03)
 ANSI/ASTM D 4682-1996  测定二冲程汽油发动机润滑油与汽油的混溶性和流动性的规范  Specification for Miscibility with Gasoline and the Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants
 ANSI/ASTM D 4683-1996  在高温和高剪切率条件下用锥形滚环轴承模拟器测量粘度的标准测试方法  Standard Test Method to Measure Viscosity by Tapered Bearing Simulator at High Temperature and High Shear Rate (05.03)
 ANSI/ASTM D 4684-1992  发动机油在低温下表观粘度和弯曲应力测定的试验方法  Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature (05.03)
 ANSI/ASTM D 4691-2002  采用火燃原子吸收光谱计量法测量水中素的规程  Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry
 ANSI/ASTM D 4693-1997  润滑脂润滑的车轮轴承低温扭矩的试验方法  Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
 ANSI/ASTM D 470-1999  电线和电缆用外套交叉链接绝缘试验方法  Methods of Testing Crosslinked Insulations and Jackets for Wire and Cable (10.01)
 ANSI/ASTM D 4703-1993  将热塑塑料模压成试样和用以切削或冲压或加工成试样的板或片的实施规程  Practice for Compression Molding Thermoplastics into Test Specimens and Plaques or Sheets from which Specimens will be Cut, Stamped or Machined
 ANSI/ASTM D 4726-2001  组装门和窗户用挤压刚性聚氯乙烯外型材规范  White Rigid Poly (Vinyl Chloride) Exterior-Profile Extrusions Used for Assembled Windows and Doors, Specification for (08.04)
 ANSI/ASTM D 473-1981  用提取法对原油和燃料油中沉淀物的试验方法  Sediment in Crude and Fuel Oils by Extraction, Method of Test for (05.01)
 ANSI/ASTM D 4736-1987  评定油冷青铜面磨擦离合器油的磨擦滞留特性的试验方法  Test Method for Evaluating Friction Retention Characteristics of Oils Used in Oil-Cooled Bronze-Faced Friction Clutches (05.03)
 ANSI/ASTM D 4737-1990  用四种重要的方程式计算十六烷指数的试验方法  Test Method for Calculated Cetane Index by Four Valuable Equations (05.03)
 ANSI/ASTM D 4738-1990  用光参数线性法校准立式圆柱槽的实施规程  Practice for Calibration of Upright Cylindrical Tanks Using the Optical Reference Line Method (05.03)
 ANSI/ASTM D 4739-1995  用电势滴定法测定碱值的试验方法  Test Method for Base Number Determination by Potentiometric Titration (05.03)
 ANSI/ASTM D 4740-2001  通过点试验对残余燃料相容性和清洁性的试验方法  Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
 ANSI/ASTM D 4741-1987  用锥形柱式粘度计在高温高剪速率下测量粘度的试验方法  Measuring of Viscosity at High Temperature and High Shear Rate by Tapered Plug Viscometer, Test Method for (05.03)
 ANSI/ASTM D 4742-2002  用薄膜氧气垂直管道法测定汽车发动机油的氧化稳定性的试验方法  Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT), Test Method for (05.03)
 ANSI/ASTM D 4745-2001  聚四氟乙烯模压和挤压料填充化合物的新标准规范  New Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials (08.03)
 ANSI/ASTM D 4754-1987  使用液膜蒸馏器移动测量塑料双面液萃取的试验方法  Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell (08.01)
 ANSI/ASTM D 4756-1991  刚性聚氯乙烯侧板和底板安装的实施规程  Practice for Installation of Rigid Poly (Vinyl Chloride) (PVC) Siding and Soffit (08.04)
 ANSI/ASTM D 4765-2001  测定工作场所中氟的试验方法  Test Method for Fluorides in Workplace Atmospheres
 ANSI/ASTM D 4766-2001  测定工作场所中氯乙烯的试验方法(活性碳法)  Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method)
 ANSI/ASTM D 4801-1988  厚度为0.25M(0.01in)以上的聚乙烯薄板的规范  Specification for Polyethylene Sheeting in Thickness of 0.25M (0.010 in) and Greater (08.03)
 ANSI/ASTM D 4802-1994  聚甲基丙烯酸甲酯塑料薄板规范  Speicification for Poly(Methyl Metacylate) Acrylic Plastic Sheet (08.03)
 ANSI/ASTM D 4803-1989  聚氯乙烯建筑产品预加热装配的试验方法  Test Method for Predicting Heat Buildup in PVC Building Products (08.04)
 ANSI/ASTM D 4804-1991  测定非刚性固体塑料可燃性的试验方法  Test Method for Determining the Flammability Characteristics of Non-Rigid Solid Plastics (08.03)
 ANSI/ASTM D 4805-1988  塑料标准术语  Terminology of Plastics Standards (08.03)
 ANSI/ASTM D 4806-1995  用作汽车火花点燃式发动机燃料的混有汽油的变性燃料酒精的规范  Denatured Fuel Ethanol to be Blended with Gasolines for Use as an Automotive Spark-Ignition Engine Fuel, Specification for (05.03)
 ANSI/ASTM D 4807-1988  薄膜过滤法测量原油中沉积物的试验方法  Sediment in Crude Oil by Membrane Filtration, Test Method (05.03)
 ANSI/ASTM D 4808-2001  低分辩核磁共振光谱法测定石油产品中氢含量的试验方法  Hydrogen Content of Petroleum Products by Low Resolution Nuclear Magnetic Resonance Spectroscopy, Test Method for (05.03)
 ANSI/ASTM D 4809-1995  用弹式量热法测定液态烃类燃料的燃烧热值的试验方法  Heat Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Intermediate Precision Method), Test Method for (05.03)
 ANSI/ASTM D 4812-1988  塑料非凹口悬臂束冲击强度的试验方法  Test Method for Unnotched Cantilever Beam Impact Strength of Plastics (08.03)
 ANSI/ASTM D 4814-1995  汽车火花点燃式发动机燃料规范  Specification for Automotive Spark-Ignition Engine Fuel (05.03)
 ANSI/ASTM D 4815-1989  用气相色谱法测定汽油中C1到C4类醇和甲基叔丁基醚的试验方法  Analysis of C1 to C4 Alcohols and MTBE in Gasoline by Gas Chromatography, Test Method for (05.03)
 ANSI/ASTM D 4816-1994  用热分析法分析航空发动机燃料比热的试验方法  Specific Heat of Aircraft Turbine Fuels by Thermal Analysis, Test Method for (05.03)
 ANSI/ASTM D 4819-1997  聚烯烃塑料制软多孔材料的规范  Specification for Flexible Cellular Materials Made From Polyolefin Plastics
 ANSI/ASTM D 482-1995  石油产品中灰分的试验方法  Test Method for Ash from Petroleum Products (05.01)
 ANSI/ASTM D 483-1992  石油装置喷淋油未磺化残渣的试验方法  Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils (05.01)
 ANSI/ASTM D 4856-2001  测定工作场所中硫酸雾的试验方法(离子层析法)  Test Method for Determination of Sulfuric Acid Mist in the Workplace Atmoshere (Ion Chromatographic)
 ANSI/ASTM D 4857-1995  润滑油降低二冲程汽油发动机(船外发动机除外)中和活塞环粘结和活塞沉积物的作用的测定  Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards, Test Method for (05.03)
 ANSI/ASTM D 4858-1995  二冲程汽油发动机润滑油促进提前点火趋势的测定  Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines, Test Method for (05.03)
 ANSI/ASTM D 4859-1988  二冲程汽油发动机-TC润滑剂规范  Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines - TC, Specification for (05.03)
 ANSI/ASTM D 4860-1991  中间馏分燃料粒子污染和游离水分的试验方法  Test Method for Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright Numerical Rating) (05.03)
 ANSI/ASTM D 4861-2001  空气中农药和多氯联苯的取样和分析的实施规程  Practice for Sampling and Analysis of Pesticides and Polychlorinated Biphenyls in Air
 ANSI/ASTM D 4863-1995  二冲程汽油发动机润滑剂润滑性的测定  Determination of the Lubricity of Two-Stroke Cycle Gasoline Engine Lubricants (05.03)
 ANSI/ASTM D 4864-1990  用气相色谱法测定丙烯凝聚物中的痕量甲醇的试验方法  Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography, Test Method for (05.03)
 ANSI/ASTM D 4865-1999  石油燃料系统中静电的产生和消除指南  The Generation and Dissipation of Static Electricity in Petroleum Fuel Systems, Guide for (05.03)
 ANSI/ASTM D 4868-1990  评定石油燃料燃烧总热值和净热值的试验方法  Estimation of Net and Gross Heat of Combustion of Petroleum Fuels, Test Method for (05.03)
 ANSI/ASTM D 4870-1994  测定剩余燃料中沉积物总量的试验方法  Test Method for Total Sediment in Residual Fuels (05.03)
 ANSI/ASTM D 4871-1988  通用氧化/热稳定性的测试仪器指南  Universal Oxidation/Thermal Stability Test Apparatus, Guide for (05.03)
 ANSI/ASTM D 4875-1994  聚氨基甲酸乙酯原材料的试验方法:聚醚多醇的聚合环氧乙烷含量的测定  Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols (08.03)
 ANSI/ASTM D 4876-1993  聚氨基甲酸乙酯原料的试验方法:原油酸碱或变性异氰酸盐的测定  Method for Testing Polyurethane Raw Materials: Determination of Acidity of Crude or Modified Isocyanates (08.03)
 ANSI/ASTM D 4877-1988  聚氨酯原料测试方法:测定异氰酸盐中的染料  Test Method for Polyurethane Raw Materials: Determination of Color in Isocyanates (08.03)
 ANSI/ASTM D 4878-1988  聚氨酯原料测试方法:测定多醇的粘度  Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols (08.03)
 ANSI/ASTM D 4881-1997  涂清漆的纤维和缠绕磁线的膜的耐热性的试验方法  Test Method for Thermal Endurance of Varnished Fibrous or Film Wrapped Magnet Wire
 ANSI/ASTM D 4882-1997  通过扭曲的线圈试验对电气绝缘清漆的粘结强度的试验方法  Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted Coil Test
 ANSI/ASTM D 4883-1989  用超声波技术测定聚乙烯密度的试验方法  Test Method for Density of Polyethylene by the Ultrasound Technique (08.03)
 ANSI/ASTM D 4889-1988  聚氨酯原料测试方法:测定异氰酸酯原料和改性的异氰酸酯的粘度  Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates (08.03)
 ANSI/ASTM D 4890-1988  聚氨酯原料测试方法:测定多醇加纳尔和阿尔法颜色  Test Methods for Polyurethane Raw Materials: Determination of Gardner and Alpha Color of Polyols (08.03)
 ANSI/ASTM D 4894-1991  粒状聚四氟乙烯模塑粗挤压材料的规范  Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram (08.03)
 ANSI/ASTM D 4895-1994  散射产生聚四氟乙烯树脂的规范  Specification for Polytetrafluoroethylene (PTFE) Resins Produced from Dispersion (08.03)
 ANSI/ASTM D 4913-2001  用直接读取法、染色延展长度和可视化学探测器测定硫化氢的浓度的实施规程  Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
 ANSI/ASTM D 4927-2001  润滑剂和添加料的素分析试验方法.钡、钙、磷、硫和锌的波长色散X射线荧光分析法  Test Methods for Elemental Analysis of Lubricant and Additive Components - Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence (05.02)
 ANSI/ASTM D 4930-1994  煅烧石油焦炭上防尘材料的试验方法  Test Method for Dust Control Material on Calcined Petroleum Coke (05.03)
 ANSI/ASTM D 4950-2001  机动车设备用润滑油的分类和规范  Classification and Specification for Automotive Service Greases
 ANSI/ASTM D 4951-2002  用感应耦合等离子体原子发射光谱法测定润滑油中添加因子的试验方法  Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (05.03)
 ANSI/ASTM D 4952-1997  燃料和溶剂中活性硫的定量分析试验方法  Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test) (05.03)
 ANSI/ASTM D 4953-1993  汽油和汽油氧化混合物蒸汽压力的试验方法(干法)  Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method) (05.03)
 ANSI/ASTM D 4962-2002  水的 NAI (T1)γ射线能谱测定实施规程  Practice for NAI (T1) Gamma-Ray Spectrometry of Water
 ANSI/ASTM D 4967-1995  在光缆中用于绝缘的套管和强度件的选择材料指南  Guide for Selecting Materials to be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables (10.02)
 ANSI/ASTM D 4968-1991  包括模型精度和偏差说明的塑料标准年审用流程图指南  Guide to Using the Flow Chart for Annual Review of Standards Including the Model Precision and Bias Statement for Plastics (08.03)
 ANSI/ASTM D 4969-1991  PTFE覆层玻璃纤维规范  Specification for PTFE Coated Glass Fabric (08.03)
 ANSI/ASTM D 4976-1995  聚乙烯塑料铸模和挤压材料规范  Specification for Polyethylene Plastics Molding and Extrusion Materials (08.03)
 ANSI/ASTM D 4996-1989  评定液压液对拖拉机终端传动磨擦影响的试验方法  Test Method for Evaluation of Fluids for Effects on Wear of Tractor Final Drives (05.03)
 ANSI/ASTM D 4997-1989  多用途液压传动液对水的敏感性的试验方法  Test Method for Evaluating Water Sensitivity of Multi-Purpose Power Transmission Fluids (05.03)
 ANSI/ASTM D 4998-1995  评定拖拉机液压液耐磨特性的试验方法  Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids (05.03)
 ANSI/ASTM D 5000-1989  使用侧流传感器评定粘土素活性的实施规程  Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor (05.03)
 ANSI/ASTM D 5001-1990  用圆柱上球体润滑性评价器测量航空涡轮燃料润滑性的试验方法  Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (Bocle) (05.03)
 ANSI/ASTM D 5002-1994  用数字密度分析仪测量原油相对密度和密度的试验方法  Test Method for Density and Relative Density of Crude Oils by Digital Analyzer (05.03)
 ANSI/ASTM D 5003-1995  石油焦哈德格罗夫可磨性指数的试验方法  Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke (05.03)
 ANSI/ASTM D 5004-1989  二甲苯置换法测定煅烧石油焦炭实密度的试验方法  Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement (05.03)
 ANSI/ASTM D 5005-1989  评定液压液对浸油离合器磨损和磨擦影响的试验方法  Test Method for Evaluation of Fluids for Effects on Friction and Wear of Wet Clutches (05.03)
 ANSI/ASTM D 5006-1990  测定航空燃料中燃料系统结冰抑制剂(醚型)试验方法  Test Method for Determination of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels (05.03)
 ANSI/ASTM D 5012-2001  收集和保存大气潮湿沉积物用材料的制备指南  Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition
 ANSI/ASTM D 5017-1991  用碳-13核磁共振法测定线性低密度聚乙烯组成的试验方法  Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance (08.03)
 ANSI/ASTM D 5021-1995  热塑弹性体氯乙烯混合物规范  Specification for Thermoplastic Elastomer-Chlorinated Ethylene Alloy (Tecea) (08.03)
 ANSI/ASTM D 5023-2001  用三点弯曲测量塑料动态机械特性的试验方法  Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using Three Point Bending (08.03)
 ANSI/ASTM D 5024-2001  压缩过程中塑料动态机械特性测量的试验方法  Test Method for Measuring the Dynamic Mechanical Properties of Plastics in Compression (08.03)
 ANSI/ASTM D 5025-1994  对塑料材料进行小刻度燃烧试验的试验室燃炉规范  Specification for a Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials (08.03)
 ANSI/ASTM D 5026-2001  拉力下塑料动力机械性能的试验方法  Test Method for Measuring the Dynamic Mechanical Properties of Plastics in Tension (08.03)
 ANSI/ASTM D 5028-1990  用过热性能分析对树脂弯曲特性的试验方法  Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis (08.03)
 ANSI/ASTM D 5033-1990  关于再生塑料的正确使用的标准制定指南  Guide for the Development of Standards Relating to the Proper Use of Recycled Plastics (08.03)
 ANSI/ASTM D 5045-1999  塑料材料平面应变裂缝强度和应变能量释放速率的试验方法  Test Method for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials (08.03)
 ANSI/ASTM D 5056-1997  用原子吸收法测量石油焦炭中痕量金属的试验方法  Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
 ANSI/ASTM D 5059-1998  用X-射线光谱法测定汽油中铅含量的试验方法  Test Method for Lead in Gasoline by X-Ray Spectroscopy (05.03)
 ANSI/ASTM D 5071-1991  光降解塑料辐照用加水弧型辐照氙灯的操作规程  Practice for Operating Xenon ARC-Type Exposure Apparatus with Water for Exposure of Photodegradable Plastics (08.03)
 ANSI/ASTM D 5083-1995  使用等截面试样测定增强热固塑料拉抻特性的试验方法  Tensile Properties of Reinforced Thermosetting Plastics Using Specimens of Constant Cross-Section, Test Method for (08.03)
 ANSI/ASTM D 5091-2001  电渗析/电渗析反向应用的水分析指南  Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications
 ANSI/ASTM D 5110-2001  用紫外线光度测定法对臭氧监测器的校准和臭氧转换标准的认证的实施规程  Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
 ANSI/ASTM D 5111-2001  在非城区监测大气沉积物的取样方法和位置的选择指南  Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations
 ANSI/ASTM D 5116-1990  室内材料/产品中的有机物排放的小规模环境小室测定指南  Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products
 ANSI/ASTM D 5117-1990  玻璃纤维增强固态挤拔原料染料渗透的试验方法  Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock (08.03)
 ANSI/ASTM D 5119-1995  Crc L-38火花点燃式发动机中汽车火花点燃式发动机油的评定方法  Test Method for Evaluation of Automotive Engine Oils in the CRC L-38 Spark-Ignition Engine (05.03)
 ANSI/ASTM D 5127-2001  电子和半导体工业中使用的超纯净水指南  Guide for Ultra Pure Water Used in the Electronics and Semiconductor Industry
 ANSI/ASTM D 5133-2001  温度扫描法测试润滑油的低温低剪切率粘性或温度依赖性的试验方法  Test Method for Low Temperature, Low Shear Rate Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
 ANSI/ASTM D 5134-1992  利用虹吸气体层析法详细分析N壬烷石脑油的试验方法  Test Method for Detailed Analysis of Petroleum Naphthas Through N-Noname by Capillary Gas Chromatography (05.03)
 ANSI/ASTM D 5138-1990  液晶聚合物(LCP)规范  Specification for Liquid Crystal Polymers (08.03)
 ANSI/ASTM D 5140-1995  现场浇筑聚氨酯试验指南  Guidelines for Testing Polyurethane Poured in Place (08.04)
 ANSI/ASTM D 5155-2001  聚氨酯原料的试验方法:芳香类异氰酸盐中异氰酸含量的测定  Test Method for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates (08.03)
 ANSI/ASTM D 516-2002  水中硫酸盐离子的试验方法  Test Method for Sulfate Ion in Water
 ANSI/ASTM D 5172-2001  水分析用标准操作程序文件编制指南  Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water
 ANSI/ASTM D 5174-2002  用脉冲激光磷光光度法对水中痕量铀的试验方法  Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry
 ANSI/ASTM D 5182-1997  评定油抗磨损(擦伤)负荷能力的试验方法  Test Method for Evaluating the Scuffing (Scoring) Load Capacity of Oils (05.03)
 ANSI/ASTM D 5183-1995  使用四球磨损试验机测定润滑油的摩擦系数的试验方法  Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine (05.03)
 ANSI/ASTM D 5184-2001  灰化熔化感应耦合等离子体原子发散光谱和原子吸收光谱对燃料油中铝和硅的测定的试验方法  Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry (05.03)
 ANSI/ASTM D 5185-2002  用感应耦合等离子体原子发射光谱法测定使用过的润滑油中添加素、磨损金属和污染物的试验方法  Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (05.03)
 ANSI/ASTM D 5186-1991  超临界流体色谱法测定柴油和航空燃气涡轮发动机用燃料中芳族含量和多核芳香烃的试验方法  Test Method for Determination of Aromatic Content of Diesel Fuels by Supercritical Fluid Chromatography (05.03)
 ANSI/ASTM D 5187-1991  用X-射线照射法测定石油焦中结晶尺寸(LC)的试验方法  Test Method for Crystallite Size (LC) of Calcined Petroleum Coke by X-Ray Diffraction (05.03)
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102]
宽天下翻译公司 版权所有 2008