5分钟获取标准报价 咨询电话:010-6973-5438 QQ:31794-7760 MSN:wwtrans#126.com
首页 ANSI ASME API ASTM IEEE ISA DIN BS ISO NF JIS EN

 

ANSI——美国国家标准学会翻译目录查询

宽天下
咨询热线:010-6973-5438
标准号
中文名称
英文名称
 ANSI/ASTM D 2513-2001  热塑气体压力管道和配件规范  Specification for Thermoplastic Gas Pressure Pipe Tubing and Fittings
 ANSI/ASTM D 2517-1995  增塑的环氧树脂气压管和配件规范(08.04)  Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings (08.04)
 ANSI/ASTM D 2518-1994  电绝缘用编织玻璃布规范(10.02)  Specification for Woven Glass Fabrics for Electrical Insulation (10.02)
 ANSI/ASTM D 2519-2001  螺旋形线圈试验法测定电绝缘清漆粘结强度的试验方法  Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
 ANSI/ASTM D 2520-2001  在微波频率和温度为1650℃时实心电绝缘材料的综合介电常数的试验方法(10.02)  Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperature to 1, 650鳦 (10.02)
 ANSI/ASTM D 2532-1987  在低温静止后飞行器涡轮润滑剂的粘度和粘度变化的试验方法(05.01)  Viscosity and Viscosity Change after Standing at Low Temperature of Aircraft Turbine Lubricants, Method of Test for (05.01)
 ANSI/ASTM D 2533-1998  汽油的气液比率试验方法  Vapor-Liquid Ratio of Gasoline, Method of Test for (05.01)
 ANSI/ASTM D 2534-1988  蜡涂层的动摩擦系数的试验方法(05.01)  Coefficient of Kinetic Friction for Wax Coatings, Method of Test for (05.01)
 ANSI/ASTM D 2538-1995  用转矩流变器测定聚乙烯树脂的熔融试验方法(08.02)  Test Method for Fusion of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer (08.02)
 ANSI/ASTM D 2549-1991  用淘析色谱法测定高沸点油的有代表性芳香族和非芳香族馏分的分离试验方法(05.01)  Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography (05.01)
 ANSI/ASTM D 256-1993  塑料及电绝缘材料的抗冲击性的试验方法(08.01,09.02)  Test Methods for Impact Resistance of Plastics and Electrical Insulating Materials (08.01, 09.02)
 ANSI/ASTM D 2561-1995  吹模聚乙烯容器的耐周围应力断裂的试验方法(08.02)  Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers (08.02)
 ANSI/ASTM D 2562-1994  从增强热固塑料中对模制部件可视缺陷进行分类的方法(08.02)  Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics (08.02)
 ANSI/ASTM D 2563-1994  从增强塑料叠层部件中对模制部件可视缺陷进行分类的方法(08.02)  Practice for Classifying Visual Defects in Parts Molded From Reinforced Plastic Laminate Parts (08.02)
 ANSI/ASTM D 2565-1992  塑料曝光用氙弧型(水冷)曝光仪的操作实践(08.02)  Practice for Operating Xenon Arc-Type (Water-Cooled) Light Exposure Apparatus with and without Water for Exposure of Plastics (08.02)
 ANSI/ASTM D 2566-1986  在固化期间热固化铸模树脂的线性收缩的试验方法(08.02)  Cured Thermosetting Casting Resins During Cure, Test Method for Linear Shrinkage of (08.02)
 ANSI/ASTM D 2569-1997  硬沥青蒸馏的试验方法  Test Method for Distillation of Pitch
 ANSI/ASTM D 2570-1998  发动机冷却剂的模拟使用腐蚀试验方法  Test Method for Simulated Service Corrosion Testing of Engine Coolants
 ANSI/ASTM D 2578-1994  聚乙烯和聚丙烯薄膜的湿润张力的试验方法(08.02)  Test Method of Wetting Tension of Polyethylene and Polypropylene Films (08.02)
 ANSI/ASTM D 2581-2001  聚丁烯塑料模塑和挤塑材料规范(08.02,08.04)  Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials (08.02, 08.04)
 ANSI/ASTM D 2582-1992  塑料薄膜和薄板的耐裂口撕裂扩散的试验方法(08.02)  Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting (08.02)
 ANSI/ASTM D 2583-1992  用Barcol印压计测定刚性塑料的压痕硬度的试验方法(08.02)  Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor (08.02)
 ANSI/ASTM D 2584-1994  固化增强树脂的点燃损耗的试验方法(08.02)  Test Method for Ignition Loss of Cured Reinforced Resins (08.02)
 ANSI/ASTM D 2593-1993  用气相色谱法测定丁二烯纯度和烃类杂质的试验方法(05.01)  Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography, Method of Test for (05.01)
 ANSI/ASTM D 2595-1997  宽温度范围下润滑脂蒸发损耗的试验方法(05.01)  Evaporation Loss of Lubricating Greases over Wide-Temperature Range, Method of Test for (05.01)
 ANSI/ASTM D 2596-1997  润滑脂的超高压特性的测量方法(四球法)(05.01)  Method for Measurement of Extreme-Pressure Properties of Lubricating Greases (Four-Ball Method) (05.01)
 ANSI/ASTM D 2597-1994  用气相色谱法分析天然气体-液体混合物的试验方法(05.02)  Analysis of Natural Gas-Liquid Mixtures by Gas Chromatography, Method for (05.02)
 ANSI/ASTM D 2598-1991  从成份分析中计算液化石油气的某些物理特性的方法(05.02)  Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis (05.02)
 ANSI/ASTM D 2599-1987  用X射线光谱测定法测定汽油中铅含量的试验方法(05.02)  Test Method for Lead in Gasoline by X-Ray Spectrometry (05.02)
 ANSI/ASTM D 2603-2001  含聚脂油的声剪切稳定性的试验方法(05.02)  Test Method for Sonic Shear Stability of Polymer-Containing Oils (05.02)
 ANSI/ASTM D 2619-1995  液压液的水解稳定性的试验方法(酒瓶试验法)(05.02)  Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Test Method), Test Method for (05.02)
 ANSI/ASTM D 262-2001  奥氏体不锈钢中晶间冲击敏感性检测的实施规程  Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
 ANSI/ASTM D 2622-1994  石油产品中硫的试验方法(X射线光谱法)(05.02)  Test Method for Sulfur in Petroleum Products (X-Ray Spectrographic Method) (05.02)
 ANSI/ASTM D 2624-1994  含静态耗散器添加剂的航空馏出油的电导率的试验方法(05.02)  Test Method for Electrical Conductivity of Aviation and Distillate Fuels Containing a Static Dissipator Additive (05.02)
 ANSI/ASTM D 2625-1994  干性固态薄膜润滑剂的耐磨损寿命和荷载容量的测定方法(润滑剂耐热耐压法)(05.02)  Determining Endurance (Wear) Life and Load-Carrying Capacity of Dry Sold Film Lubricants (Falex Method), Method for (05.02)
 ANSI/ASTM D 2647-1994  交链乙烯塑料规范(08.02)  Specification for Cross-Linkable Ethylene Plastic (08.02)
 ANSI/ASTM D 2649-1983  干性固体薄膜润滑剂的耐腐蚀特性的测定方法(05.02)  Corrosion Characteristics of Dry Sold Film Lubricants, Method for Determining (05.02)
 ANSI/ASTM D 2650-1988  用质谱法测定气体的化学成份的试验方法(05.02,05.05)  Chemical Composition of Gases by Mass Spectrometry, Test Method for (05.02, 05.05)
 ANSI/ASTM D 2655-1995  额定达2000的电线和电缆的交链聚乙烯绝缘规范(10.02)  Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated to 2000 (10.02)
 ANSI/ASTM D 2656-1995  额定2001到35V的电线和电缆的交链聚乙烯绝缘规范(10.02)  Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35V (10.02)
 ANSI/ASTM D 2657-1996  聚烯烃管和配件的热接合实施规范  Practice for Heat Joining of Polyolefin Pipe and Fittings
 ANSI/ASTM D 2661-2001  丙烯腈-丁二烯-苯乙烯共聚物(ABS)制塑料排水管、污水管和通风管和配件的规范.表40  Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
 ANSI/ASTM D 2662-1996  限定内径的聚丁烯(PB)塑料管(SIDR-PR)规范  Specification for Polybutylene (PB) Plastic Pipe (SDR-PR) Based on Controlled Inside Diameter
 ANSI/ASTM D 2665-2001  聚氯乙烯(PVC)塑料排水管、污水管和通风管及配件的规范  Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
 ANSI/ASTM D 2666-1996  聚丁烯(PB)塑料管规范  Specification for Polybutylene (PB) Plastic Tubing
 ANSI/ASTM D 2669-1987  混有添加剂的石蜡的表观粘度的试验方法(热熔化法)(05.02)  Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts) (05.02)
 ANSI/ASTM D 2670-1994  液体润滑剂的耐磨损性的测量方法(润滑剂的耐热耐压法)(05.02)  Measuring Wear Properties of Fluid Lubricants (Falex Method), Method for (05.02)
 ANSI/ASTM D 2671-1995  电气用热缩管件的试验方法(10.02)  Test Methods for Heat-Shrinkable Tubing for Electrical Use (10.02)
 ANSI/ASTM D 2673-1994  定向聚丙烯薄膜规范(08.02)  Specification for Oriented Polypropylene Film (08.02)
 ANSI/ASTM D 2680-2001  ABS和PVC复合管道规范  Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
 ANSI/ASTM D 2683-1996  限定外径的聚乙烯管用套节型聚乙烯配件规范  Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
 ANSI/ASTM D 2686-1994  四氟乙烯衬的压敏电绝缘胶带规范(10.02)  Specification for Tetrafluroethylene-Backed Pressure-Sensitive Electrical Insulating Tape (10.02)
 ANSI/ASTM D 2699-2001  用研究法对机动车燃料抗爆特性的试验(05.04)  Motor Fuels by the Research Method, Test for Knock Characteristics of (05.04)
 ANSI/ASTM D 2700-2001  用马达法测定机动车和航空燃料的抗爆性的试验(05.04)  Motor and Aviation Fuels by the Motor Method, Test for Knock Characteristics of (05.04)
 ANSI/ASTM D 2709-1993  用离心法测定馏出燃料中水和沉淀物的试验方法(05.02)  Water and Sediment in Distillate Fuels by Centrifuge, Method of Test for (05.02)
 ANSI/ASTM D 2710-1989  用电势滴定法测定石油烃类的溴的指数的试验方法(05.02)  Bromine Index of Petroleum Hydrocarbons by Electrometric Titration, Test Method for (05.02)
 ANSI/ASTM D 2711-2001  测定润滑油的乳化分解性的试验方法(05.02)  Demulsibility Characteristics of Lubricating Oils, Method of Test for (05.02)
 ANSI/ASTM D 2712-1996  用气相色谱法测定丙烯浓缩物中烃类痕量的试验方法  Test Method for Hydrocarbon Traces in Propylene Concentrates by Gas Chromatography (05.02)
 ANSI/ASTM D 2713-1991  测定丙烷干燥性的试验方法(阀门冷冻法)(05.02)  Test Method for Dryness of Propane (Valve Freeze Method) (05.02)
 ANSI/ASTM D 2714-1994  α型LFW-1摩擦和磨损试验机的校准和操作方法(05.02)  Calibration and Operation of the Alpha Model LFW-1 Friction and Wear Testing Machine, Method for (05.02)
 ANSI/ASTM D 2715-1992  真空中润滑剂的挥发率的测量方法(05.02)  Measurement of Volatilization Rates of Lubricants in Vacuum, Method for (05.02)
 ANSI/ASTM D 2717-1995  流体的热导性的试验方法(05.02)  Thermal Conductivity of Liquids, Method of Test for (05.02)
 ANSI/ASTM D 2729-1996  聚氯乙烯(PVC)污水管及配件规范  Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
 ANSI/ASTM D 2732-1997  塑料薄膜和薄板的自由线性热收缩率的测试方法  Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
 ANSI/ASTM D 2734-1991  增强塑料的空隙含量的试验方法(08.02)  Test Methods for Void Content of Reinforced Plastics (08.02)
 ANSI/ASTM D 2737-2001  聚乙烯塑料管规范  Specification for Polyethylene (PE) Plastic Tubing
 ANSI/ASTM D 2741-1991  聚乙烯瓶的碳黑累积的敏感度的试验方法(08.02)  Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation (08.02)
 ANSI/ASTM D 2751-1996  丙烯腈-丁二烯-苯乙烯共聚物(ABS)污水管及其配件规范  Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
 ANSI/ASTM D 2755-1997  取样和减少电气级氧化镁的试验方法  Test Method for Sampling and Reduction to Test Weight of Electrical Grade Magnesium Oxide
 ANSI/ASTM D 2765-2001  交叉链接的聚乙烯塑料膨胀率和胶含量测定的试验方法  Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
 ANSI/ASTM D 2766-1995  测定液体和固体比热的试验方法(05.02)  Test Method for Specific Heat of Liquids and Solids (05.02)
 ANSI/ASTM D 2768-1995  电线和电缆通用乙烯和丙烯橡胶套规范(10.02)  Specification for General-Purpose Ethylene-Propylene Rubber Jacket for Wire and Cable (10.02)
 ANSI/ASTM D 2770-2001  电线及电缆用耐臭氧的乙丙橡胶整体绝缘材料及套管规范  Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable
 ANSI/ASTM D 2771-1997  电气级氧化镁压实密度的试验方法  Test Methods for Compaction Density of Electrical Grade Magnesium Oxide
 ANSI/ASTM D 2773-1994  电气级氧化镁燃烧损耗的试验方法(10.01)  Test Method for Loss on Ignition of Electrical Grade Magnesium Oxide (10.01)
 ANSI/ASTM D 2774-2001  热塑压力管的地下安装操作规程  Practice for Underground Installation of Thermoplastic Pressure Piping
 ANSI/ASTM D 2777-1998  负责水的D-19 委员会的可应用方法的精度和偏差测定实施规程  Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water
 ANSI/ASTM D 2779-1992  石油液中气体的溶解性的评估的试验方法(05.02)  Estimation of Solubility of Gases in Petroleum Liquids, Method for (05.02)
 ANSI/ASTM D 2780-1992  流体中气体的固定溶解性的试验(05.02)  Gases in Liquids, Test for Solubility of Fixed (05.02)
 ANSI/ASTM D 2782-2001  润滑液超高压特性的测量方法(泰姆肯试验方法)(05.02)  Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method), Method for (05.02)
 ANSI/ASTM D 2783-1988  润滑液超高压特性的测量方法(四球法)(05.02)  Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method), Method for (05.02)
 ANSI/ASTM D 2784-1992  液化石油气中硫含量的试验方法(氢氧燃烧炉或灯)(05.02)  Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) (05.02)
 ANSI/ASTM D 2786-1996  用高电离电压质谱法分析气-油饱和馏分的烃类型的试验方法  Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturate Fractions by High Ionizing Voltage Mass Spectrometry (05.02)
 ANSI/ASTM D 2789-1996  用质谱法测定低烯烃族汽油中烃类型的试验方法(05.02)  Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry, Method of Test for (05.02)
 ANSI/ASTM D 2809-1999  带有发动机冷却剂的铝泵的气蚀和侵蚀特性的试验方法  Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps with Engine Coolants
 ANSI/ASTM D 2838-1997  塑料薄膜和薄板的收缩张力及定向释放应力的试验方法  Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
 ANSI/ASTM D 2842-2001  硬质泡沫塑料吸水性的试验方法  Test Method for Water Absorption of Rigid Cellular Plastics (08.02)
 ANSI/ASTM D 2843-1977  测定从塑料的燃烧或分解中释放的烟密度的试验方法(08.02)  Test Method for Density of Smoke from the Burning or Decomposition of Plastics (08.02)
 ANSI/ASTM D 2847-1999  汽车和轻型卡车运行用发动机冷却剂试验的实施规范  Practice for Testing Engine Coolants in Car and Light Truck Service
 ANSI/ASTM D 2856-1994  用空气比重瓶测定硬质多孔塑料的孔隙率的试验方法(08.02)  Open-Cell Content (Porosity) of Rigid Cellular Plastics by the Air Pycnometer, Test Method for (08.02)
 ANSI/ASTM D 2857-1995  高聚物的稀释溶液粘度的试验方法(08.02)  Test Method for Dilute Solution Viscosity of Polymers (08.02)
 ANSI/ASTM D 2858-1997  电气级氧化镁的热导率的试验方法  Test Method for Thermal Conductivity of Electrical Grade Magnesium Oxide
 ANSI/ASTM D 2859-2002  加工的织物地板覆盖物材料的燃烧特性试验方法  Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials
 ANSI/ASTM D 2865-1995  电气绝缘材料试验用标准和设备的校准实施规程(10.02)  Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing (10.02)
 ANSI/ASTM D 287-1992  原油产品的API比重的试验方法(比重计法)  API Gravity of Crude Petroleum Products (Hydrometer Method), Method of Test for (05.01, 10.03)
 ANSI/ASTM D 2873-1994  用水银注入孔隙测定法测定聚氯乙烯树脂的内部孔隙率的试验方法(08.02)  Test Method for Interior Porosity of Poly (Vinyl Chloride) (PVC) Resins by Mercury Intrusion Porosimetry (08.02)
 ANSI/ASTM D 2878-1995  评价润滑油的表观蒸气压力和分子重量的方法(05.02)  Method for Estimating Apparent Vapor Pressures and Molecular Weight of Lubricating Oils (05.02)
 ANSI/ASTM D 2879-1992  用蒸气压力计测定蒸气压力-温度的关系和液体的初始分解温度的试验方法(05.02)  Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope, Method of Test for (05.02)
 ANSI/ASTM D 2880-1994  燃气轮机燃料油规范(05.02)  Gas Turbine Fuel Oils, Specification for (05.02)
 ANSI/ASTM D 2881-1973  金属工作液和相关材料的分类(05.02)  Metal Working Fluids and Related Materials, Classification for (05.02)
 ANSI/ASTM D 2882-1990  恒定叶轮泵中石油和非石油液压液的耐磨损特性的显示方法(05.02)  Method for Indicating the Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in a Constant Vane Pump (05.02)
 ANSI/ASTM D 2883-1995  液体和固体材料的反应阈温度的试验方法(05.02)  Test Method for Reaction Threshold Temperature of Liquid and Solid Materials (05.02)
 ANSI/ASTM D 2884-1987  用针入法测定非均质推进剂的屈服应力的试验方法(05.02)  Test Method for Yield Stress of Heterogeneous Propellants by the Cone Penetration Method (05.02)
 ANSI/ASTM D 2885-1995  用在线分析仪的辛烷额定值的研究和马达法(05.04)  Research and Motor Method Octane Ratings Using On-Line Analyzers, Test Method for (05.04)
 ANSI/ASTM D 2887-2001  用气相色谱法测定石油馏分的沸点范围分布的试验方法(05.02)  Boiling Range Distribution of Petroleum Fractions by Gas Chromatography, Test Method for (05.02)
 ANSI/ASTM D 2889-1995  石油馏出燃料的蒸气压力的真实计算(05.02)  Vapor Pressures of Petroleum Distillate Fuels, Calculation of True (05.02)
 ANSI/ASTM D 2890-1992  石油馏出燃料的液体热量的计算方法(05.02)  Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels (05.02)
 ANSI/ASTM D 2892-2001  原油蒸馏法(15理论板柱)  Distillation of Crude Petroleum (15 Theoretical Plate Column), Method for (05.02)
 ANSI/ASTM D 2893-1999  耐特高压润滑油氧化特性的试验方法  Test Method for Oxidation Characteristics of Extreme Pressure Lubricating Oils
 ANSI/ASTM D 2895-1988  40℃存储后蜡纸和纸板的光泽留着率的试验方法(05.02,15.09)  Gloss Retention of Waxed Paper and Paperboard after Storage at 104鳩 (40鳦), Method of Test for (05.02, 15.09)
 ANSI/ASTM D 2896-1996  用电势高氯酸滴定法测定石油产品的总基数的试验方法(05.02)  Total Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration, Test Method for (05.02)
 ANSI/ASTM D 2898-1996  防火试验用经阻燃处理的木材的加速风化方法  Methods for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
 ANSI/ASTM D 2900-1997  用于护套式电加热件的电气级氧化镁的加速寿命试验的方法  Test Method for Accelerated Life Test of Electrical Grade Magnesium Oxide as Used in Sheathed-Type Electric Heating Elements
 ANSI/ASTM D 2902-1995  含氟聚合物树脂热缩管件规范(10.02)  Specification for Fluoropolymer Resin Heat-Shrinkable Tubing (10.02)
 ANSI/ASTM D 2923-2001  聚烯烃薄膜和薄板刚性的试验方法(08.02)  Test Method for Rigidity of Polyolefin Film and Sheeting (08.02)
 ANSI/ASTM D 2924-2001  增强热固性树脂管的耐外压力试验(08.04)  Reinforced Thermosetting-Resin Pipe, Test Method for External Pressure Resistance of (08.04)
 ANSI/ASTM D 2925-2001  在全孔流情况下纤维玻璃(玻璃纤维增强热固树脂)束偏转的试验方法  Test Method for Beam Deflection of fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
 ANSI/ASTM D 295-1994  电绝缘用浸漆棉织物试验方法  Method of Testing Varnish Cotton Fabrics Used for Electrical Insulation (10.01)
 ANSI/ASTM D 2951-1995  3型和4型耐热应力断裂的聚乙烯塑料的试验方法(95-1,13项)(08.02)  Test Method for Resistance of Types 3 and 4 Polyethylene Plastics to Thermal Stress-Cracking (95-1, Item 13) (08.02)
 ANSI/ASTM D 2981-1994  振动中粘性固体薄膜润滑剂的耐磨损的测量方法(05.02)  Measuring the Wear Life of Bonded Solid Film Lubricants in Oscillating Motion, Test Method for (05.02)
 
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102]
宽天下翻译公司 版权所有 2008